Type IIB instanton corrections from pure modular unfolding

arXiv:2611.13086 · hep-th · Submitted 2026-11-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Theory. The day in high-energy theory: gravity, strings, fields and the questions left open.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Type IIB instanton corrections from pure modular unfolding".

Mira: Here's the gist of the paper. The study reconstructs instanton corrections to type IIB higher-derivative interactions from their low Fourier modes by employing modular symmetry, deliberately avoiding supersymmetry differential equations.

Kai: This approach leverages modular coefficient functions to investigate non-BPS interactions.

Mira: For the D6R4 coefficient, the continuous spectral overlap is determined via a regularized Rankin–Selberg unfolding of the complete zero mode.

Kai: Cusp amplitudes are then extracted from the Mellin residues of the complete first mode, assuming a conjectured simplicity for the even cusp spectrum.

Paper summary: Kai: So the paper's title is "Type IIB instanton corrections from pure modular unfolding". The authors are Amineh Mohsenia and their team at the Jefferson Physical Laboratory and Harvard University zero. The core thesis of this work is reconstructing instanton corrections to type IIB higher-derivative interactions using modular symmetry, deliberately avoiding supersymmetry differential equations zero.

Mira: They claim this provides a framework for studying non-BPS interactions through their modular coefficient functions, which is interesting because it bypasses the usual tools that require those differential equations zero.

Lev: The paper outlines a process where they use the Rankin–Selberg unfolding of the complete zero mode to determine the continuous spectral overlap, which is a necessary first step in their reconstruction method zero.

Kai: After that, they assume a conjectured simplicity for the even cusp spectrum and extract those cusp amplitudes from Mellin residues of the complete first mode zero. This part relies on an assumption about how simple that spectrum is.

Mira: Then they combine those contributions to reconstruct all higher Fourier modes using Hecke relations to fix the contribution of these amplitudes zero. This reconstruction step is where they tie everything together.

Lev: The results show that by utilizing the Kuznetsov trace formula and bounds on spectral tails, they can derive terms like g to negative one half times s and constant terms in the weak-coupling instanton prefactor at every fixed positive charge zero.

Kai: They point out that the leading term they get comes from an infinite cusp sum, and both of those coefficients match known expansions we have seen before zero.

Mira: Furthermore, they show that even with incomplete low-mode data, modular ambiguities can be constructed to provide sufficient conditions for the stability of leading higher-charge coefficients zero.

Lev: Applying this whole framework to D8R4 data identifies what additional information is required if you want to predict those higher charges accurately zero. So it sets a clear target for future work.

Conclusion: Kai: So we've been looking at the paper "Type IIB instanton corrections from pure modular unfolding" and the authors Amineh Mohsenia and colleagues zero. The main thrust of this work is using modular symmetry to reconstruct instanton corrections to type IIB higher-derivative interactions without needing supersymmetry differential equations zero.

Mira: It's a framework that lets us study non-BPS interactions through their modular coefficient functions, which means we don't have to invoke those differential equations for every case zero.

Lev: The paper shows how they use the Rankin–Selberg unfolding and Mellin residues to get the cusp amplitudes, and then Hecke relations reconstruct the higher Fourier modes zero. This is a lot of machinery being put together just to see what's happening with these interactions.

Kai: What this means for us is that they've established how to tackle these corrections using only low-mode data and modular unfolding, which suggests a new path for understanding these non-BPS physics zero.

Mira: It points toward the necessity of determining the cusp growth independently from the zero mode data, which is what they show with D8R4 data zero. That tells us what's missing in our current low-mode measurements.

Lev: The authors flag that establishing these stability bounds for higher Fourier modes remains an open task, which is a limitation they are upfront about zero. So while the method works for leading coefficients, pushing it to higher orders still needs more proof zero.

Amineh Mohsenia, Jefferson Physical Laboratory, INFN, Sezione di Milano

Jefferson Physical Laboratory · INFN, Sezione di Milano

hep-th

Submitted: 2026-11-09

Updated: 2026-11-09

Comments: 76 pages

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 96/100

The gist: The study reconstructs instanton corrections to type IIB higher-derivative interactions from their low Fourier modes by employing modular symmetry…

Key concepts

Modular Symmetry
This mathematical symmetry is used to relate different Fourier modes of the interaction. By exploiting this symmetry, researchers can reconstruct complex higher-derivative interactions from simpler low-frequency data, even without using supersymmetry differential equations.
Rankin–Selberg Unfolding
This technique is employed on the complete zero mode to determine the continuous spectral overlap. It helps map out how different parts of the interaction's spectrum connect, which is crucial for understanding the full structure of the corrections.
Cusp Amplitudes
These amplitudes are extracted from residues obtained via Motohashi’s additive-divisor formula applied to the first Fourier mode. They represent specific contributions to the interaction that arise from singular behavior in the spectrum, which are then combined using Hecke relations.

Terminology

Summary

The study reconstructs instanton corrections to type IIB higher-derivative interactions from their low Fourier modes by employing modular symmetry, deliberately avoiding supersymmetry differential equations. p. 0 This approach leverages modular coefficient functions to investigate non-BPS interactions. p. 0 For the D6R4 coefficient, the continuous spectral overlap is determined via a regularized Rankin–Selberg unfolding of the complete zero mode. p. 0 Cusp amplitudes are then extracted from the Mellin residues of the complete first mode, assuming a conjectured simplicity for the even cusp spectrum. p. 0 These amplitudes are combined using Hecke relations to reconstruct all higher Fourier modes. p. 0 Utilizing the Kuznetsov trace formula and bounds on spectral tails, the authors derive g-1/2s and constant terms in the weak-coupling instanton prefactor at every fixed positive charge. p. 0 The leading term arises from an infinite cusp sum, and both coefficients match known expansions. p. 0 With incomplete low-mode data, modular ambiguities are constructed to provide sufficient conditions for the stability of leading higher-charge coefficients. p. 0 Applying this framework to D8R4 data identifies the additional information required for higher-charge predictions. p. 0

The reconstruction process involves several steps: first, using regularized Rankin–Selberg unfolding of the complete zero mode to ascertain continuous spectral overlap; second, subtracting Eisenstein terms fixed by prescribed growth and removing the first Fourier modes of the Eisenstein subtraction and its continuous contribution from f 1 to isolate the cusp part, whose residues yield individual cusp amplitudes through Motohashi’s additive-divisor formula; and finally, using Hecke relations to fix the contribution of these amplitudes to every higher Fourier mode. p. 3

The weak-coupling expansion for the reconstructed D6R4 Fourier mode is given by f k(y) = e-2 pi ky / 8 zeta(3) sigma-2(k) sqrt y + Bk + o(1), as y to infinity, where Bk is an explicit finite sum over positive charge pairs. p. 3 The reconstructed Fourier modes with k at least 1 exhibit the expansion f k(y) = Sk(y) + C k(y) + U k(y) for y > 0, where Sk(y) is the restored Eisenstein contribution, C k(y) is the continuous contribution from the zero mode, and U k(y) is the cusp contribution determined by Hecke relations. p. 9 The constant term in the instanton prefactor is given by Bk = 64 pi/2 cubed k squared X a,b at least 1 a+b=k (ab) 3/2 sigma-2(a) sigma-2(b) "1 - 2 b - a k 2/2. The reconstructed Fourier modes with k at least 1 also have the expansion f k(y) = e-2 pi ky / 8 zeta(3) sigma-2(k) sqrt y + Bk + O k, epsilon(y-1/4+ epsilon), for 0 < epsilon < 1/4. p. 3 The square-root term originates entirely from the infinite cusp sum, while the continuous contribution is o(sqrt y e-2 pi ky) (Appendix B. p. 34), and restored Eisenstein terms enter at constant order. p. 3 A Gaussian kernel captures the growing range of cusp parameters t j = O(sqrt y) responsible for this growth, leading to the square-root coefficient A k = pi/2 a k = 8 zeta(3) sigma-2(k) sqrt k. p. 3

The constant term Bk is further specified as Bk = 315 zeta(3) 2 pi/3 k 2 sigma-5(k) + 4 pi zeta(3) 2 sigma-1(k) + Z k0 squared sqrt k. p. 0 Both the square-root and constant coefficients are in exact agreement with the GMV Fourier expansion at every positive charge. p. 0 The second-mode ambiguity persists even when the full one-instanton expansion is fixed and the zero mode changes only by O(ye-8 pi y). p. 4 Stability bounds provide sufficient conditions for a modular approximation to reproduce physical leading coefficients in higher Fourier modes, although establishing these bounds for D8R4 remains an open task. p. 0 The framework is applicable to other higher-derivative interactions where low-mode data and cusp growth can be determined independently, with the Mellin reflection relation offering further constraints on missing zero-mode terms. p. 2

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve reconstruction of higher Fourier modes from partial low-mode data by using modular additions that preserve specified low-mode coefficients while changing leading instanton coefficients in higher modes, as shown in Section 5.4. This allows for controlled prediction of higher mode coefficients when only partial weak-coupling data is available for D8R4.

  2. Develop a method to identify the stability conditions for leading instanton coefficients by analyzing the difference between modular candidates and ensuring that their Fourier modes satisfy certain growth bounds, as detailed in Section 5.3. This provides sufficient conditions for omitted contributions to leave the leading coefficient of a growing instanton prefactor unchanged.

  3. Implement techniques to isolate cusp amplitudes from first-mode data by extracting residues of the Mellin transform of the residual first mode using Motohashi's additive-divisor formula, as described in Section 2.4 and Appendix A.5. This allows for the determination of individual cusp amplitudes before applying Hecke relations to fix their contribution at higher charge.

  4. Create a framework to derive weak-coupling expansions for reconstructed Fourier modes by combining the continuous contribution from Rankin-Selberg unfolding with the restored Eisenstein terms, as shown in Section 4.3 and Equation (3.10). This allows for the recovery of both the square-root and constant coefficients of the full instanton prefactor at fixed positive charge.

  5. Integrate spectral moment calculations using the Kuznetsov trace formula to derive asymptotic expressions for coefficients, specifically by evaluating Res s=iT Mh(s) as shown in Section 4.2. This allows for the derivation of both the square-root coefficient Ak and the constant term Bk of the full reconstructed Fourier mode.

Sources

Related papers