Full-sphere emission and reception directivities of seven echolocating bat species

arXiv:2611.12742 · eess.AS · Submitted 2026-11-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Full-sphere emission and reception directivities of seven echolocating bat species".

Dev: Here's the gist of the paper. Echolocating bats shape their calls and the returning echoes with their noseleaf or mouth, head and pinnae Understanding these spectrospatial directivity patterns is central to bat echolocation.

Rosa: Dataset Description The paper describes a dataset of simulated far-field emission and reception directivities of seven echolocating bat species from three families (Phyllostomidae, Rhinolophidae and Vespertilionidae).

Dev: For each species, the dataset contains several components including (1) a closed, simulation-ready head mesh derived from a micro-computed tomography (micro-CT) scan, (3) the complexvalued far-field transfer functions of both ears and of the emitter on the full sphere from 20 to 160 kHz, and (5) a skeleton for the pinnae and noseleaf, with which the meshes can be posed and simulated again.

Rosa: The emission patterns of the five nasal emitters are BEM results, whereas the emitters of the two mouth-emitting vespertilionids are analytical piston models calibrated to published beam widths.

Paper summary: Rosa: So we’re looking at this paper called "Full-sphere emission and reception directivities of seven echolocating bat species." Basically, the authors built a dataset of simulated far-field emission and reception directivities for seven different bat species from three families: Phyllostomidae, Rhinolophidae, and Vespertilionidae. They’re showing how the noseleaf or mouth shapes these calls and echoes.

Dev: That sounds like a big undertaking because they are providing head meshes made from micro-computed tomography scans for each species. They are giving us the complex valued far-field transfer functions of both ears and the emitter on the full sphere, covering frequencies from twenty to one sixty kilohertz in steps of zero point five kilohertz.

Taro: So, what’s the main point here? Is it just cataloging bat anatomy or is there something deeper about how this shapes their echolocation patterns?

Rosa: It’s about understanding those spectrospatial directivity patterns because that’s central to how bats actually use echolocation. The paper claims this dataset is useful for simulating bat biosonar and echo acoustics, as well as for localization and head movement models.

Dev: And they provide a set of five nasal emitters using boundary element method results, but the two mouth emitting vespertilionids have analytical piston models calibrated to published beam widths. They even include skeletons for the pinnae and noseleaf so you can pose them and simulate again how posture shapes those directivities.

Taro: If we can pose them, that means we can test what happens when a bat changes its position, which is crucial for real-world scenarios where the world misbehaves. But what about the limitations of this data? Does it capture everything?

Rosa: The paper notes that every species is represented by only one preserved specimen, so they are actually a collection of specimen based reference models, not averages of species. They also state that these responses are for acoustically rigid heads and not full solutions of the near field.

Dev: That’s important because it means we can use this data to study morphology and directivity comparisons, or as training data for acoustic learning, but we shouldn't treat these as perfect measurements of what a bat actually experiences in flight.

Taro: I wonder if the way they derived the source placements helps us understand where bats are actually emitting sound in complex environments.

Rosa: They used a rule based on maximizing the standardized sum of front back ratio and occlusion for the other five species, which is how they placed those nasal emitters. And there’s a sensitivity analysis showing that alternative ear positions correlate with the nominal one with medians of zero point seven five to one point zero zero.

Dev: That suggests that even if you change where you put your ears on this model, the overall pattern correlation stays fairly consistent, which is a good sign for robustness in our simulations. But they also mention how sensitive the directivity index is to the radius of the piston emitters, changing by a median of one point five to one point nine decibels when that radius changes by twenty percent.

Paper summary: Taro: So if we are designing biomimetic sonar, we have to be careful about how much we rely on those specific source assumptions and parameters. What about comparing these simulated results to actual measurements?

Rosa: They did technical validation by comparing the solver against an analytical solution and independent data, showing consistency checks with reference ERTFs of P. discolor and M. microtis, for example. They also reproduce a measured HRTF just like Mesh2HRTF does, meaning both their simulations deviate from real measurements in the same way.

Dev: That’s interesting because they found that to align the measurement directions with the mesh, you need an additional rotation of about twenty six degrees to get those median pattern correlations up from zero point seven zero to zero point eight two.

Taro: So what does this tell us practically for someone listening who isn't a bat expert? It seems like it’s confirming that the physics of the head shape really dictates how sound travels, even when you change the input parameters slightly.

Rosa: Exactly, because what we’re seeing is that the geometry—the noseleaf or mouth—is directly shaping those spectrospatial patterns. The whole point of this paper is to give us a concrete way to model and predict bat echolocation behavior based on their physical structure.

Dev: And they’ve given us the tools, including the code that computes the responses and a small simulator that turns them into binaural echo signals, which is pretty useful for putting these directivity calculations into practice.

Taro: It feels like a solid foundation for building more complex models of bat biosonar, but I still see limitations because they explicitly state that the data represents rigid heads and fixed ear postures.

Rosa: That’s true; the limitation they flag is that since it only represents rigid heads and fixed ear postures, it doesn't capture variation within a species or how a bat might move its head dynamically during echolocation.

Dev: And another practical point from the paper is that for mouth emitters like Eptesicus fuscus and Myotis dau, the nominal oral emitters are calibrated to search calls in free flight in the open field, which means users need to adapt their beam width based on what situation they are modeling.

Taro: So, while this dataset gives us a strong starting point for simulating directivity based on morphology, we have to remember that the fidelity depends entirely on how well we model those rigid constraints and fixed postures.

Rosa: Right. So this paper is essentially giving researchers a comprehensive set of simulated far-field data for seven species, which they’ve modeled with high resolution up to one hundred sixty kilohertz. This sets a benchmark for simulating bat acoustics based on physical anatomy.

Conclusion: Rosa: So we've been looking at how researchers built this dataset of simulated far-field emission and reception directivities for seven bat species, which is what this paper is about, "Full-sphere emission and reception directivities of seven echolocating bat species."

Dev: Right. Basically, they took those head scans and the ear transfer functions from those different families—Phyllostomidae, Rhinolophidae, Vespertilionidae—and put them all together onto a full sphere model.

Taro: So the main idea is that they are trying to map out exactly how much sound a bat throws out in every direction and how well it hears echoes coming back from those directions.

Rosa: Exactly. It’s about seeing the entire pattern, not just one part of it, which is super important for understanding how bats actually use sonar in the real world.

Dev: And they’re using these models to figure out if a bat's head shape and its ears are optimized for searching in free space or something else.

Taro: It gives us a way to test those assumptions about where the sound is coming from, you know, when we try to model things that aren't just sitting still in a perfect vacuum.

Rosa: It helps bridge the gap between what we see on a head scan and what’s actually happening when that bat is flying around.

Dev: So, this work sets up a kind of benchmark for simulating bat acoustics based on their actual physical anatomy, which is pretty cool for testing new models.

Taro: It’s interesting because they're showing how sensitive the results are to the assumptions they make about where the sound source is exactly located on that head.

Rosa: Yeah, and while it’s a powerful tool for building those simulations, we have to remember it only works for these rigid heads and fixed ear postures.

Dev: That's the catch; it doesn't account for how a bat actually moves its head or changes its posture during echolocation calls in real flight.

Taro: Exactly, so the next step is figuring out how to move this model beyond being just a static representation of anatomy.

Jan Steckel, Flanders Make

Cosys-Lab · University of Antwerp

eess.AS

Submitted: 2026-11-09

Updated: 2026-11-09

Comments: 34 pages, 8 figures, supplementary information appended. Data: https://doi.org/10.5281/zenodo.23729269. Code: https://github.com/Cosys-Lab/bat_ertf_dataset

Code: https://github.com/Cosys-Lab/bat_ertf_dataset

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: Echolocating bats shape their calls and the returning echoes with their noseleaf or mouth, head and pinnae Understanding these spectrospatial directivity patterns is central to bat echolocation.

Key concepts

Far-field directivity
This describes how focused or spread out a sound beam is when it travels far away from the source, like a flashlight beam. In this context, it measures the pattern of sound emitted by a bat and how that pattern changes depending on the direction of reception.
Transfer function
A transfer function mathematically describes how a specific part of an acoustic system, like an ear or noseleaf, modifies incoming sound waves. It tells researchers exactly what kind of frequency information is passed through or blocked by that anatomical structure.
Posable models
The dataset includes skeletons for the bat's pinnae (ears) and noseleaf that can be moved and rotated. This feature lets researchers test different head postures to see how changing the physical shape of the ears alters the resulting sound patterns.

Terminology

Summary

Echolocating bats shape their calls and the returning echoes with their noseleaf or mouth, head and pinnae Understanding these spectrospatial directivity patterns is central to bat echolocation. p. 0

Where the paper says it

Echolocating bats shape their calls and the returning echoes with their noseleaf or mouth, head and pinnae. Understanding these spectrospatial directivity patterns is central to bat echolocation.

Dataset Description

The paper describes a dataset of simulated far-field emission and reception directivities of seven echolocating bat species from three families (Phyllostomidae, Rhinolophidae and Vespertilionidae). For each species, the dataset contains several components including (1) a closed, simulation-ready head mesh derived from a micro-computed tomography (micro-CT) scan, (3) the complexvalued far-field transfer functions of both ears and of the emitter on the full sphere from 20 to 160 kHz, and (5) a skeleton for the pinnae and noseleaf, with which the meshes can be posed and simulated again. p. 0

Where the paper says it

In this Data Descriptor, we describe a dataset of simulated emission and reception directivities of seven species: Phyllostomus discolor, Micronycteris microtis, Macrophyllum macrophyllum, Rhinolophus rouxii, Rhinolophus formosae, Eptesicus fuscus and Myotis daubentonii (Table 1). For each species, it contains (1) a closed, simulation-ready head mesh derived from a micro-computed tomography (micro-CT) scan, (2) the anatomical landmarks used as sources: the ear canal entrances, and the nostrils or the mouth, (3) the complexvalued far-field transfer functions of both ears and of the emitter on the full sphere from 20 to 160 kHz, (4) the transfer functions of up to four alternative positions of every ear and of the nostril pair, and (5) a skeleton for the pinnae and the noseleaf, with which the meshes can be posed and simulated again.

The emission patterns of the five nasal emitters are BEM results, whereas the emitters of the two mouth-emitting vespertilionids are analytical piston models calibrated to published beam widths. p. 0
Where the paper says it

Meshes, landmarks and directivities share one coordinate frame, so that they are spatially aligned without any further registration. The emission patterns of the five nasal emitters are BEM results, whereas the emitters of the two mouth-emitting vespertilionids are analytical piston models calibrated to published beam widths, with alternative radii, as their beam depends on the task of the bat, and we keep this distinction throughout the data and this paper.

Modeling and Methodology

The acoustic model uses an acoustically rigid head with sound sources as small vibrating patches on its surface. The transfer function of an ear is computed by acoustic reciprocity, where a small patch at the ear canal entrance vibrates with uniform normal velocity. p. 3

Where the paper says it

Sources: ears and emitters The transfer function of an ear is computed by acoustic reciprocity: a small patch at the ear canal entrance (radius 0. 4 mm) vibrates with uniform normal velocity, and the pressure it radiates to a far-field point, normalized as described below, equals the patch-averaged pressure that a source with the same volume velocity at that point produces at the ear.

The emission of mouth-emitting bats is modeled using an analytical circular piston, which approximates the open mouth and does not include the head. p. 3
Where the paper says it

We therefore model the emission of these two species with an analytical circular piston 28,29. The piston approximates the open mouth and does not include the head.

Source placement for the other five species was derived by a rule based on maximizing the standardized sum of front/back ratio and occlusion. p. 3
Where the paper says it

To place the sources of the other five species, we derived a rule from these two: the best-matching positions are those that radiate most strongly forward (front/back ratio) and are most occluded by the surrounding anatomy, which is where pinna and noseleaf focus sound forward. Each receiver is placed at the maximum of the standardized sum of the front/back ratio and the occlusion, and the nostrils at the mirror-symmetric pair 1.

Validation and Metrics

Technical validation involved numerical verification, comparing the solver with an analytical solution and independent data. Comparisons with earlier simulations showed consistency checks, such as the agreement between the dataset ERTFs and reference ERTFs of P. p. 3

Where the paper says it

Source placement Where exactly the receiver sits at the ear canal entrance, and where the nostrils are, is a modelling choice that the meshes do not fix, and our comparisons with the earlier simulations showed that it matters (see Technical Validation). To quantify this, we computed dense sets of candidate sources for the two species with earlier reference simulations, P.

discolor (left) and M. p. 1
Where the paper says it

Coordinate frame and landmarks All data are given in the frame of the original CT meshes (for P. discolor in a rotated pose, see below), with the axes renamed: X points forward, Y to the bat’s left and Z up, in metres.

microtis (right). p. 9
Where the paper says it

10 RMS di fference (dB) d GPU BEM vs NumCalc (M. microtis) Left ear Right ear Emitter Figure 3: Verification of the Solver.

Metrics used include pattern correlation, relative complex error, directivity index, and half-amplitude angle of a beam. p. 7
Where the paper says it

The relative complex error ∥H − Href∥/∥Href∥ over all directions includes level and phase. The directivity index is the peak power over the power averaged over the full sphere, and the half-amplitude angle of a beam is the angular radius of a cone with the same solid angle as the region within 6 dB of the peak.

Sensitivity Analysis

The dataset demonstrates sensitivity to source assumptions; for instance, alternative ear positions correlate with the nominal one with medians of 0.75–1.00. The directivity index for piston emitters is sensitive to the radius, changing by a median of 1. p. 8

Where the paper says it

00 (ears), 0. 83 (nostrils) Piston radius Radius ±20 % Directivity index ±1.

5–1.9 dB when the radius is changed by 20%. p. 2
Where the paper says it

5 kHz steps). Emitter: nasal (two vibrating nostril patches, BEM) or oral (analytical piston of radius a, calibrated to the open-field search beam, with five alternative radii from 2.

The source placement rule shows that alternative nostril pairs correlate with 0. p. 8
Where the paper says it

daubentonii, measured HRTF 98th–99th percentile of 211 candidates In-flight beam M. daubentonii Piston 15◦ narrower Sensitivity Source placement Alternative ear positions and nostril pairs Correlation 0.

70 and 0.90 when held out. p. 3
Where the paper says it

70 for the median candidate, and 0. 81 when the rule is chosen without the held-out species.

Data Availability

The dataset is available at Zenodo 32 (https://doi.org/10.5281/zenodo. p. 4

Where the paper says it

Data Records The dataset is available at Zenodo 32 (https://doi. 5281/zenodo.

23729269) under a Creative Commons Attribution 4. p. 4
Where the paper says it

5281/zenodo. 23729269), under a Creative Commons Attribution 4.

0 International (CC BY 4. p. 4
Where the paper says it

23729269), under a Creative Commons Attribution 4. 0 International (CC BY 4.

0) licence. p. 4
Where the paper says it

0 International (CC BY 4. 0) licence.

The code that produced the dataset is available on GitHub and archived together with the dataset at Zenodo 32 (version 1. p. 4
Where the paper says it

On Zenodo, every species folder is one zip archive of the same name, the loader and the examples are in code. zip, and the complete code that produced the dataset is in bat ertf code-1.

0.0, bat ertf code-1. p. 4
Where the paper says it

On Zenodo, every species folder is one zip archive of the same name, the loader and the examples are in code. zip, and the complete code that produced the dataset is in bat ertf code-1.

0.0 zip) under the BSD 3-Clause licence. p. 4
Where the paper says it

0 International (CC BY 4. 0) licence.

The total size of the dataset is 3. p. 4
Where the paper says it

txt lists the unpacked files. The total size of the dataset is 3.

3 GB.

Posable Models

Every mesh comes with a skeleton that allows for posing the pinnae and noseleaf, enabling studies of how posture shapes directivities. Posed meshes passed validity checks without self-intersections or stretched edges by more than a factor of two. p. 4

Where the paper says it

A posed mesh therefore has the same triangles as the rest mesh, so that the source patches and landmarks carry over. A validity check rejects poses that make the surface intersect itself, invert faces or stretch edges by more than a factor of two.

The ear patterns change markedly with the posture of the pinnae, showing that at 10 to 25◦ of flex, the left-ear pattern correlates with that of the rest pose with only 0. p. 4
Where the paper says it

A validity check rejects poses that make the surface intersect itself, invert faces or stretch edges by more than a factor of two. The rest pose is the preserved posture of the specimen, for which the transfer functions of the dataset were computed.

73 to 0.92. The oral emitters are approximated by analytical pistons because the preserved specimens have closed mouths. p. 1
Where the paper says it

The segmented surfaces contain the head, including the pinnae with tragus and, where present, the noseleaf, truncated behind the skull, not containing body or wings such as in previous work 7 . The pinnae are in the posture in which the specimens were preserved, and the mouths of all specimens are closed (Supplementary Fig.

Comparison with Measurements

The pipeline reproduces a measured HRTF as well as Mesh2HRTF does, showing that both simulations deviate from measurements in the same way. The alignment between measurement directions and the mesh requires an additional rotation of about 26◦ to increase median pattern correlations from 0. p. 8

Where the paper says it

Correlation: pattern correlation of two directivity patterns in dB (median over frequency where a range of frequencies is compared). Relative error: relative complex error over all directions.

70 to 0.82. The placement rule on the Vesterholm mesh chose a position within 0. p. 3
Where the paper says it

86 for the ears (means over the ten placement frequencies), against 0. 94 for the best possible position and 0.

01 of the best candidate, confirming the occlusion component of the rule. p. 3
Where the paper says it

To place the sources of the other five species, we derived a rule from these two: the best-matching positions are those that radiate most strongly forward (front/back ratio) and are most occluded by the surrounding anatomy, which is where pinna and noseleaf focus sound forward. Each receiver is placed at the maximum of the standardized sum of the front/back ratio and the occlusion, and the nostrils at the mirror-symmetric pair 1.

The calibrated pistons represent the narrow open-field search beam, and bats in confined spaces are better described by alternative radii. p. 6
Where the paper says it

daubentonii the analytical pistons calibrated to search calls in free flight in the open field, the narrowest beam of these bats. In the laboratory, in confined spaces and when approaching prey, their beams are considerably wider (see the alternative radii in the dataset and the Usage Notes).

The limitations of the dataset follow from its construction, as it represents rigid heads and fixed ear postures. p. 1
Where the paper says it

As every species is represented by a single specimen, the dataset is a collection of specimen-based reference models, not of species averages, and it does not capture variation within a species. Furthermore, the responses are far-field directivities of acoustically rigid heads, not measurements and not full solutions of the near field.

The oral emitters are the most approximate part of the dataset because they are analytical pistons that omit the head. p. 4
Where the paper says it

fuscus and M. p. 0

Where the paper says it

daubentonii and the in-flight emission beam of that species of H¨afele et al. In this Data Descriptor, we describe a dataset of simulated emission and reception directivities of seven species: Phyllostomus discolor, Micronycteris microtis, Macrophyllum macrophyllum, Rhinolophus rouxii, Rhinolophus formosae, Eptesicus fuscus and Myotis daubentonii (Table 1).

daubentonii are analytical pistons without a head, whose directivity cannot be compared directly with that of the BEM emitters.

The five alternative radii span the range of published beam widths from 3. p. 0
Where the paper says it

Meshes, landmarks and directivities share one coordinate frame, so that they are spatially aligned without any further registration. The emission patterns of the five nasal emitters are BEM results, whereas the emitters of the two mouth-emitting vespertilionids are analytical piston models calibrated to published beam widths, with alternative radii, as their beam depends on the task of the bat, and we keep this distinction throughout the data and this paper.

5 mm to 6.5 mm. The placement rule for the nostrils failed for one species, R. p. 3
Where the paper says it

Source placement Where exactly the receiver sits at the ear canal entrance, and where the nostrils are, is a modelling choice that the meshes do not fix, and our comparisons with the earlier simulations showed that it matters (see Technical Validation). To quantify this, we computed dense sets of candidate sources for the two species with earlier reference simulations, P.

formosae, where the second choice was used instead. p. 0
Where the paper says it

In this Data Descriptor, we describe a dataset of simulated emission and reception directivities of seven species: Phyllostomus discolor, Micronycteris microtis, Macrophyllum macrophyllum, Rhinolophus rouxii, Rhinolophus formosae, Eptesicus fuscus and Myotis daubentonii (Table 1). For each species, it contains (1) a closed, simulation-ready head mesh derived from a micro-computed tomography (micro-CT) scan, (2) the anatomical landmarks used as sources: the ear canal entrances, and the nostrils or the mouth, (3) the complexvalued far-field transfer functions of both ears and of the emitter on the full sphere from 20 to 160 kHz, (4) the transfer functions of up to four alternative positions of every ear and of the nostril pair, and (5) a skeleton for the pinnae and the noseleaf, with which the meshes can be posed and simulated again.

Usage Notes

The HDF5 files can be read with any HDF5 library and complex values are stored as a compound of real and imaginary parts. Impulse responses follow from an inverse real FFT over frequency, after the band below 20 kHz and above the top of the band has been filled in with a smooth taper to zero. p. 4

Where the paper says it

With this referencing, the spherical spreading and the propagation delay from the origin are removed, and the phase of H is the phase relative to a wave arriving at (or leaving from) the origin. An inverse FFT over frequency therefore yields an impulse response with t = 0 at the origin, which, for directions on the side of the source, starts up to |⃗p|/c (about 60 µs) before t = 0.

The two-way ERTF of a direction is the product of the emitter and the ear transfer functions. p. 4
Where the paper says it

Supplementary Video 1 (also available at https://youtu. be/ Q9Kxj9oIEwg) shows the seven heads turning with the beam patterns of their left ear and emitter, frequency sweeps of the left ear, the emitter and the two-way ERTF of all species from 20 to 160 kHz, and the posable models of M.

The data are responses at 1 m, where magnitudes represent far-field directivity, but phase still contains the curvature of the wavefront over the head. p. 7
Where the paper says it

The magnitudes at 1 m represent the farfield directivity (pattern correlations of at least 0. 992 with the response at 20 m), while the phase still contains the curvature of the wavefront over the head (relative complex differences of up to 0.

For reflectors closer than about 1 m, the incident field is not plane over the head and these data are an approximation. p. 1
Where the paper says it

For the other species, it follows the orientation of the scan, so that the pitch of the head differs between species (Fig. We therefore did not rotate the data into a common anatomical frame, which would require choices (for instance, of a skull-based horizontal plane) that are better left to the user.

The nominal oral emitters of E. p. 4
Where the paper says it

5 to 5 mm from the nominal ones, which show how strongly a result depends on this choice. The mouth landmark of the oral emitters was placed by hand on the midline at the lip seam.

fuscus and M. daubentonii are calibrated to search calls in free flight in the open field, which corresponds to the narrowest beam these bats emit. p. 6
Where the paper says it

fuscus and M. daubentonii the analytical pistons calibrated to search calls in free flight in the open field, the narrowest beam of these bats.

Users should adapt the width of the beam to the situation they model. p. 3
Where the paper says it

The piston contains no head, so that its rear hemisphere, and the two-way ERTF built from it, cannot be compared with those of the BEM emitters. We calibrated the radius to published field measurements of the beam width: 6.

The dataset provides pistons of 2. p. 6
Where the paper says it

daubentonii the analytical pistons calibrated to search calls in free flight in the open field, the narrowest beam of these bats. In the laboratory, in confined spaces and when approaching prey, their beams are considerably wider (see the alternative radii in the dataset and the Usage Notes).

5 to 6.5 mm radius, and the released code computes the piston for any radius. p. 3
Where the paper says it

5 mm in steps of 1 mm, which span the published beams of these species from the laboratory (3. 7 mm28,31) to the open field, and the released code computes the piston for any radius.

Posing a model requires applying joint rotations and checking validity before solving. p. 5
Where the paper says it

json Species, emitter type, landmarks, alternative source positions, piston parameters, frame rotations, mesh statistics and conventions. rig/ Posable model: skeleton (rig.

The comparison with NumCalc shows that our implementation solves the same discrete problem as NumCalc, but it does not test the discretization error. p. 7
Where the paper says it

On the full sphere, at 80, 120 and 160 kHz, the relative complex difference between the two solvers on this mesh is at most 0. As both use the same discretization, this shows that our implementation solves the same discrete problem as NumCalc, but it does not test the discretization error, which the next section addresses.

The uncertainty at high frequencies is dominated by how faithfully the mesh represents the anatomy, not by the number of elements per wavelength. p. 7
Where the paper says it

03 for the emitter, but a new remesh of the CT surface at half the edge length differs by 0. At high frequencies, the uncertainty of the data is therefore dominated by how faithfully the mesh represents the fine anatomy, rather than by the number of elements per wavelength.

The phase of H changes quickly with direction at high frequencies because it contains the delay of the source relative to the origin. p. 4
Where the paper says it

Every transfer function is referenced to the free-field pressure at the same point of a monopole at the origin with the same volume velocity Q as the source: H(ψ, f) = p(R ⃗u(ψ)) pf f (R) ∗ , pf f (R) = −jωρQ· e jkR 4πR , (3) as in Mesh2HRTF21, where the complex conjugate converts the result into the e +jωt convention of the discrete Fourier transform. With this referencing, the spherical spreading and the propagation delay from the origin are removed, and the phase of H is the phase relative to a wave arriving at (or leaving from) the origin.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can simulate bat biosonar by using a dataset of simulated far-field emission and reception directivities for seven species, allowing for modeling of echo-based localization in complex environments.

  2. The system can perform comparative studies of how morphology shapes directivity by processing the provided data on head meshes and their corresponding transfer functions, enabling researchers to see how morphology shapes directivity.

  3. AI systems can be trained as training data for acoustic learning by utilizing the full dataset to study acoustic learning, which is central to bat echolocation.

  4. The system can be used for the design of biomimetic sonar by leveraging the analytical piston models calibrated to published beam widths, allowing users to compute the piston for any radius.

  5. AI systems can perform head-movement models by utilizing the posable head models and their associated skeletons, which allows for checking that posed meshes remain valid inputs for the BEM.

Abstract

Echolocating bats shape their calls and the returning echoes with their noseleaf or mouth, head and pinnae. Understanding these spectrospatial directivity patterns is central to bat echolocation. We describe a dataset of simulated far-field emission and reception directivities of seven echolocating bat species from three families (Phyllostomidae, Rhinolophidae and Vespertilionidae). For each species, the head of one preserved specimen was scanned with micro-computed tomography and converted into a closed surface mesh, on which the responses of both ears and of the emitter were computed with a boundary element method or, for the two mouth-emitting species, with an analytical piston model. The complex-valued responses cover the full sphere at 2.5 deg resolution from 20 to 160 kHz in 0.5 kHz steps. They come with the meshes, the landmarks of ears, nostrils and mouth, alternative source positions and skeletons for posing the pinnae and noseleaves, all in one frame, and with Python and MATLAB code. The technical validation covers solver verification, mesh convergence, comparisons with earlier simulations and measurements, and sensitivity analyses.

Related papers