Amplitudes separation and strong-electromagnetic phases determination in the decays into baryon-antibaryon pairs

arXiv:2611.12673 · hep-ph, nucl-th · Submitted 2026-11-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Amplitudes separation and strong-electromagnetic phases determination in the decays into baryon-antibaryon pairs".

Mira: Here's the gist of the paper. The paper extracts the relative phase between strong and electromagnetic amplitudes of J/ψ decays into baryon–antibaryon pairs to determine production-phase predictions.

Kai: Pruning redundant reasoning tokens We extract the relative phase between strong and electromagnetic amplitudes of the decays of a vector charmonium into spin-1/2 baryon–antibaryon pairs.

Mira: Starting from a flavour-SU(3) effective Lagrangian with vector and tensor currents, we construct a parametrization in terms of partial waves coefficients.

Kai: The electric and magnetic phases, the phase of the integrated complex overlap and the effective rate angle are derived from the same source amplitudes.

Paper summary: Kai: So this paper is about separating the strong force from the electromagnetic force in decays where J-psi turns into a baryon and an antibaryon pair, trying to find those production phase predictions.

Mira: Right, it's looking at how those two forces interfere in these specific charmonium decays. The authors are using a flavor SU(three) model and building this parametrization with partial wave coefficients to get the handle on it.

Lev: From my side, what I’m hearing is they’re trying to set up the interaction terms so they keep track of the spin information needed for angular distributions while respecting how flavors organize themselves, which is crucial for real hardware.

Conclusion: Kai: So, we're wrapping up this paper, "Amplitudes separation and strong-electromagnetic phases determination in the decays into baryon-antibaryon pairs." Basically, they’ve built a way to cleanly separate how the strong force and electromagnetism are playing out when a J/psi particle breaks down into a baryon and an antibaryon.

Mira: Exactly. The authors use this flavor SU(three) framework, combining vector and tensor currents, to parametrize the decay using partial wave coefficients. They're focusing on finding those relative phases between the strong and electromagnetic amplitudes in production.

Lev: From my view as someone who builds for real hardware, they’ve set up the interaction terms to track all that spin information needed for angular distributions while keeping flavor organization consistent with other work. It’s about making sure what we measure at a lab machine matches what the theory predicts at some level.

Kai: They introduce these two universal phases and two real ratios in the S and D wave basis, which they fit using branching ratios and angular parameters. The results for those ratios are small, under zero point six, which is pretty neat.

Mira: And they show that while this setup works for reproducing the branching ratios and angular parameters, it doesn't quite lock down the full amplitudes of the decay. There’s still freedom left in those values.

Lev: For running this on real hardware, calculating these observables would mean dealing with an overhead related to all four dimensions they’re fitting. It's a lot of parameter space to explore when you try to get high fidelity results.

Kai: So what this means for us is that we have a powerful tool here. We can separate the strong force and electromagnetism during these decays to get a better idea of production phases, even if it doesn't pin down the exact amplitudes completely.

Mira: It gives us a way to check our theoretical models against experimental data by seeing if our predictions for those relative phases match what we find in cross-section measurements. It’s a validation tool.

Lev: And for the next step, we still have that puzzle of polarization, especially with certain hyperons. That’s where they suggest a natural extension is needed to fully describe everything consistently across all channels.

C. Alice, A. Amoroso, M. Barbagiovanni, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, D. Cabiati, A. Calcaterra, G. Cibinetto, F. Cossio, M. Destefanis, F. De Mori, E Di Fiore, L Fava, S Garbolino, I Garzia, M Greco, M Maggiora, S Marcello, F M Melendi G Mezzadri P Patteri S Pacetti A Rivetti M Rolo F Rosini M Scodeggio S Sosio S Spataro U Zarantonello

INFN Laboratori Nazionali di Frascati · INFN Sezione di Torino · University of Turin · Politecnico di Torino · INFN Sezione di Ferrara · University of Ferrara · University of Eastern Piedmont · INFN Sezione di Perugia

hep-ph, nucl-th

Submitted: 2026-11-09

Updated: 2026-11-09

Comments: 16 pages, 6 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 75/100

The gist: The paper extracts the relative phase between strong and electromagnetic amplitudes of J/ψ decays into baryon–antibaryon pairs to determine production-phase predictions.

Key concepts

Relative Phase ($\phi_S$, $\phi_D$)
These are the distinct phases between the strong interaction amplitude and the electromagnetic amplitude in the decay of a vector charmonium into baryon-antibaryon pairs. Determining these phases is crucial for predicting how J/psi decays occur, as they reveal the interference between different production mechanisms.
Flavor-SU(3) Effective Lagrangian
This is a theoretical framework used to describe the interactions between quarks and hadrons. It organizes the decay amplitudes based on flavor symmetry, allowing researchers to construct a parametrization that relates these amplitudes to physical observables like partial wave coefficients.
Production Phase ($\Delta\Phi$)
This phase describes the relative electric and magnetic components of the total amplitude for J/psi decays. It is distinct from the strong-EM phases and helps characterize how the charmonium transitions into baryon-antibaryon pairs, providing insight into their production dynamics.
S-D Wave Basis
This is a specific mathematical basis used to decompose the total complex-valued S and D wave amplitudes. The real mixed ratios are fitted in this basis because it allows for a transparent interpretation of partial wave corrections and provides separate rate interpretations.

Terminology

Summary

The paper extracts the relative phase between strong and electromagnetic amplitudes of J/ψ decays into baryon–antibaryon pairs to determine production-phase predictions. p. 0

Pruning redundant reasoning tokens

We extract the relative phase between strong and electromagnetic amplitudes of the decays of a vector charmonium into spin-1/2 baryon–antibaryon pairs. Starting from a flavour-SU(3) effective Lagrangian with vector and tensor currents, we construct a parametrization in terms of partial waves coefficients. p. 0 The electric and magnetic phases, the phase of the integrated complex overlap and the effective rate angle are derived from the same source amplitudes. p. 0 We retain two possible solutions and both of them describe the scalar Σ+Σ¯ − scan phase within its uncertainty while presenting tension with several electric–magnetic production phases. p. 0

How the training signal is built

The interaction is chosen to retain the spin information required by angular distributions and polarization while preserving the flavour organization of Ref. [1]. For on-shell baryons, a parity-conserving vector vertex can be expressed through Dirac and Pauli covariant currents. p. 1 A vector current and an antisymmetric tensor current thus provide a minimal covariant realization of the two spin amplitudes. p. 1 The flavour structure is fixed separately. p. 1 The charmonium is a singlet under light-flavour SU(3), so the symmetry limit couples it to the singlet baryon bilinear. p. 1

Where the gains come from

The model introduces two universal phases and two real mixed ratios in the S and D wave basis. The real reduced coefficients are fitted to BRs, angular parameters and the proton electromagnetic continuum background. p. 0 For a given channel, the amplitude of the decay J/ψ → BB¯ derived from the Lagrangian in Eq. p. 1 (2) is AB = ϵµu¯1CV,Bγµ + iσµνqν2M0CT,Bv2, q = p1 + p2. p. 1 The factor 1/M0 in Eq. p. 0 (2) supplies the inverse mass required by the tensor operator. p. 1 The matching to the Dirac–Pauli parametrization for the hadronic decay amplitude is performed for each physical channel separately. p. 2

The kinematic factor κ as κ = 1 − (m1 − m2)2s defines an effective mass defined by two-body kinematics. The classical relationship between the Dirac-Pauli, CV - CT, and the electromagnetic Sachs basis GE-GM for the hadronic vertex in our case is given by GM = CV + m¯M0CT, GE = CV + s4¯mM0CT. p. 2 We also define dimensionless rescaled form factors GbM = √κ GM, GbE = √κ m¯M12GE, which coincide with the unhatted quantities of Eq. p. 2 (14) for equal masses. p. 2

The partial-wave form factors components have dimensions of energy whereas the DiracPauli and Sachs ones are dimensionless. The decomposition for each decay mechanism is gaB = xaBe iϕa, eaB = yaB, maB = ηBRagaB, haB = (1 + ηBRa)gaB, haB is the strong-plus-mixed contribution. p. 3 The model has fourteen real parameters: ten reduced coefficients with dimensions of energy, two phases ϕS, ϕD between the strong and the EM decay amplitudes, and two dimensionless ratios RS, RD defined as RS,D = Aggγ S,D(B) / Aggg S,D(B). p. 3

The observables depend on the total complex-valued Sand D-wave amplitudes. They have dimensions of energy and are determined by fourteen fit parameters. p. 3 Defining the energy-dimensioned helicity combinations in the Sachs basis as MB = zSB + zDB/√2, EB = zSB − √2zDB, the angular observables for polarized baryon–antibaryon pairs can be expressed as dBB/d cos θ = KB4MB2(1 + cos squared θ 2) + EB2(1 − cos squared θ). p. 3

The retained solutions have RS,D < 0.6 while all the phases are in the determination [−π, π]. p. 4 The statistical proximity of the two minimum regions reflects itself in the compatibility of the corresponding parameter sets. p. 4 The difference between these two overall quantities has a direct geometrical meaning which can be projected by projecting the non-EM source in the EM direction as aX,B = IX,B/eB2eB + aX,B,⊥ e†BaX,B,⊥ = 0. p. 8 p. 8

The total EMFFs ratio is written as Gbtot E Gbtot M = ρ ei∆Φ where ρ = √τ12r1 − αB1 + αB. The production phase is ∆Φ = argGbtot E Gbtot∗ M, which describes the relative electric and magnetic components of the total amplitude and is clearly distinct from the strong-EM phases discussed in the previous section. p. 0

The model has fourteen real parameters: ten reduced coefficients with dimensions of energy, two phases ϕS, ϕD between the strong and EM amplitudes, and two dimensionless ratios RS, RD defined as RS,D = Aggγ S,D(B) / Aggg S,D(B). The mixed contribution is retained only for charged channels following the prescription of Ref. p. 3 [1]. The real ratios are placed in the S-D-basis because this gives two separate partial-wave corrections with a transparent rate interpretation. p. 3

The channel dependence is carried by the signed real flavour combinations xaB and yaB while the relative strongEM phase depends only on the partial wave. The positive branches give central values for the sine of the proton form factors relative phase equal to 0. p. 9754 and 0.996. Both solutions fail to reproduce the Λ and Σ0 phases. p. 4 p. 4

The angle Ψrate lies in the [0, π] determination. In this model, the channel ΛΣ¯ 0 + c. p. 8 p. 8c. has no strong–EM phase because it does not have strong decay amplitude and the mixed decay amplitude is supposed to be real with respect to the strong one. p. 8 p. 8 The difference between the two overall quantities has a direct geometrical meaning which can be projected by projecting the non-EM source in the EM direction as aX,B = IX,B/eB2eB + aX,B,⊥ e†BaX,B,⊥ = 0. p. 8

The original model assumes Aggγ = RAggg for charged channels and finds R = −0.097 ± 0.021 [1]. The real projection R∥ minimizes m − Rg2 and is the closest amplitude-level counterpart of the scalar ratio. p. 7 A universal scalar R for the whole octet is recovered only when R⊥ = 0, i. p. 0e., when RS = RD = R and gives R∥ = R and Rrate,+ = R under the assumption that R > −1. p. 1

The retained minima demonstrate that a compact flavour ansatz with real reduced coefficients can reproduce BRs and angular parameters while yielding distinct production-phase predictions. The two scan solutions are not to be intended as independent measurements. p. 9 The ansatz of a real EM source in the S-D-basis cannot reproduce the nonzero polarization of the ΛΣ¯ 0 + c. p. 8 p. 8c. pair.

A natural extension would allow a relative electromagnetic phase directly in the S-D-basis, for example eB = (ySB, eiδγ yDB)T while retaining real flavour coefficients and strong isospin symmetry. This choice removes the forced zero transition polarization but its ability to describe all channels requires a new fit.

The angle Ψrate lies in the [0, π] determination. In this model, the channel ΛΣ¯ 0 + c.c. has no strong–EM phase because it does not have strong decay amplitude and the mixed decay amplitude is supposed to be real with respect to the strong one.

The total form factors account for all the three decay mechanisms. The production phase is ∆Φ = arg(zSB − √2zDB)(zSB + zDB/√2)∗. p. 4 The angle αB = MB2 − EB2MB2 + EB2, which is the angular parameter. p. 3

The available hyperon production-phase measurements are compared with the predictions in Table XI. Both solutions fail to reproduce the Λ and Σ0 phases. The tension between the measurement and the model prediction remains because of this failure. p. 6

The available hyperon production-phase measurements are compared with the predictions in Table XI. The difference between these two overall quantities has a direct geometrical meaning which can be projected by projecting the non-EM source in the EM direction as aX,B = IX,B/eB2eB + aX,B,⊥ e†BaX,B,⊥ = 0.

The final conclusion is that the ansatz of a real EM source in the S-D-basis cannot reproduce the nonzero polarization of the ΛΣ¯ 0 + c.c. pair. A natural extension would allow a relative electromagnetic phase directly in the S-D-basis, for example eB = (ySB, eiδγ yDB)T while retaining real flavour coefficients and strong isospin symmetry.

The model successfully reproduces the fitted BRs and angular parameters while providing lineshape phases compatible with those extracted from fits to the cross-section. The production phases, however, show that this success does not determine the amplitudes completely. p. 9 p. 9

The simultaneous fit of the baryonic BRs and the angular parameters αB gives two local minima. Both describe the fitted BRs and angular parameters and provide lineshape phases compatible with those extracted from fits to the cross-section. p. 4 The production phases, however, show that this success does not determine the amplitudes completely.

The two scan solutions are not to be intended as independent measurements. The ansatz of a real EM source in the S-D-basis cannot reproduce the nonzero polarization of the ΛΣ¯ 0 + c.c. pair.

The final conclusion is that the ansatz of a real EM source in the S-D-basis cannot reproduce the nonzero polarization of the ΛΣ¯ 0 + c.c. pair. A natural extension would allow a relative electromagnetic phase directly in the S-D-basis, for example eB = (ySB, eiδγ yDB)T while retaining real flavour coefficients and strong isospin symmetry.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Incorporate a two-dimensional phase parameter into AI training to distinguish between electric and magnetic decay phases for spin-1/2 baryon pairs. This allows the system to move beyond scalar rate parametrizations which only describe a common phase, enabling it to analyze polarization observables for richer physical insight.

  2. Train the system on the full set of fourteen real parameters, including two universal phases phi S and phi D, and two dimensionless ratios RS and RD. The improved AI can then map these parameters to experimental observables like branching fractions, angular parameters alpha B, and production phases Delta Phi B with greater fidelity across all channels.

  3. Implement a mechanism for reconstructing the original mixed ratio using the perpendicular amplitude component Rperp, defined by Eq (66). This allows the system to distinguish between different physical interpretations of the interference term in Fig 4 and Table XIII, specifically separating components that contribute to intensity versus those that affect normalized interference.

  4. Develop a model where a relative electromagnetic phase delta gamma is allowed in the S-D basis, eB = (ySB, ei delta gamma yDB) while retaining real flavour coefficients. This would allow the AI to reproduce nonzero polarization measurements for channels like Lambda Sigma zero plus c minus c, which the original model failed to do.

  5. Enhance the system's ability to handle kinematic factors by explicitly incorporating the mass dependence shown in Eq (A2) when transforming between the vector and tensor bases. This ensures that universal coefficients are correctly interpreted as being dependent on baryon masses, rather than assuming degeneracy.

  6. Integrate a comparison module that uses the full set of BESIII observables (Table XII) to check for consistency between the fitted production phases and external data points, such as those for proton polarization sin Delta Phi p. This provides a direct test of whether the model's solution is physically viable beyond just fitting internal data.

Sources

Related papers