A Near-Optimal Generalized Sorting Algorithm

arXiv:2611.08397 · cs.DS · Submitted 2026-11-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.

Tom: I'm Tom.

Jane: And I'm Jane, here with Lu, Meng and our in-house large language model, Lalam.

Tom: We're looking at the paper: "A Near-Optimal Generalized Sorting Algorithm".

Jane: Here's the gist of the paper. Generalized sorting is studied as a variant of ordinary sorting where only certain comparisons are allowed based on an underlying graph G, and this paper presents a randomized algorithm that recovers the total ordering using O(n log4 n) queries in expectation, showing it is no harder than ordinary sorting up to logarithmic factors Our main result nearly settles this question: we show that the query complexity of generalized sorting matches that of ordinary sorting up to polylogarithmic factors.

Tom: Our main theorem is the following: There is a randomized algorithm that, for every graph G = (V, E) on n vertices and every hidden ordering π of V such that (π(i), π(i + 1)) ∈ E for all i ∈

n − 1: , recovers π using O(n log4 n) queries in expectation.

Jane: Prediction Construction The algorithm proceeds in phases, where the progress made is summarized by Lemma 2.2, which states that for any subset of edges F, there is a randomized algorithm that makes O(n log3 n) comparisons and partitions F into a postponed set F' and a set of predicted edges F whose expected number of incorrect predictions on F' is at most O(n).

Tom: By repeatedly applying this lemma to the postponed edges, the number of unresolved edges decreases by half in each phase, leading to a prediction function P with O(n log n) many expected errors using O(n log4 n) comparisons in total.

Title and authors: Tom: So we’re looking at this paper today: "A Near-Optimal Generalized Sorting Algorithm." It’s about sorting elements when you can only compare them if there's an edge in a graph G connecting them.

Jane: That sounds like a variation of the classic sorting problem, but instead of comparing everything, you have to follow the structure of this hidden graph G.

Lu: Exactly. The core question they’re tackling is how many comparisons you need to find the total ordering when only those specific edges are allowed for comparison <ref:2611.08397#pg3>. They build on earlier work that showed the best known upper bound for generalized sorting is O(n cubed over two) <ref:2611.08397#pg1>.

Meng: I always think about how this translates to real systems. If you're running a model and you can only check certain dependencies, how much overhead does that add? We need to know if this O(n cubed over two) bound is actually achievable in practice or if it’s just theoretical math <ref:2611.08397#pg3>.

Jane: Well, what the paper shows is that they have a randomized algorithm that uses O(n log four n) comparisons in expectation <ref:2611.08397#pg1>. That’s a significant improvement over the previous O(n cubed over two) bound <ref:2611.08397#pg1>.

Tom: O of n log four n is pretty good when you're dealing with sorting, because the standard ordinary sorting takes Theta of n log n <ref:2611.08397#pg1>. So they’ve managed to keep it up to logarithmic factors over the best known ordinary sorting time <ref:2611.08397#pg1>.

Lu: It means that for generalized sorting, this algorithm is no harder than ordinary sorting when you allow those extra logarithmic factors <ref:2611.08397#pg1>. The paper shows they don't need n one plus some constant amount of something to solve it <ref:2611.08397#pg3>.

Meng: That suggests that if the graph G structure is favorable, we can expect very efficient sorting performance in those constrained comparison scenarios <ref:2611.08397#pg2>. But what about when the graph is really sparse?

Jane: That’s where their methodology gets interesting, because they don't just give you a single algorithm; they present a whole strategy for how to approach this problem <ref:2611.08397#pg2>. They call it Repeated Error Isolation for Near-Optimal Generalized Sorting <ref:2611.08397#pg4>.

Tom: The paper describes a two-phase process, which starts with building a coarse predictor and then uses an error isolation protocol to clean up the errors <ref:2611.08397#pg5>. I need to hear more about how that actually works mechanically.

Lu: In the first phase, they use something called Lemma two point two, which lets you partition a set of edges into postponed ones and predicted ones <ref:2611.08397#pg5>. This process reduces the number of unresolved edges by half in each step <ref:2611.08397#pg5>.

Jane: So, to put that in terms of what that means for a listener, it sounds like you take a big set of possible comparisons and systematically separate the ones you can confidently predict from the ones you have to save for later <ref:2611.08397#pg5>. But what about the errors?

Title and authors: Tom: The prediction function P they build has O of n log n expected errors using that method <ref:2611.08397#pg5>. That’s a lot of potential mistakes before you even start fixing them.

Meng: Before we get to the fixes, I have to ask about the cost. How many queries are we talking about for this whole process? Because if it’s O of n log four n in expectation, that's what matters for deployment <ref:2611.08397#pg1>.

Lu: The total query complexity across all these steps is bounded by O of n log three n <ref:2611.08397#pg5>. That’s the number we are looking at, and it’s what makes this approach viable compared to the previous bounds <ref:2611.08397#pg5>.

Jane: So, you're talking about a total of O of n log four n queries in expectation to get that ordering <ref:2611.08397#pg1>. That’s the main result they are highlighting here, and it shows generalized sorting isn't much harder than standard sorting up to those logarithmic factors <ref:2611.08397#pg1>.

Tom: It settles that question almost entirely, because they show this randomized algorithm recovers the hidden ordering π using O of n log four n queries in expectation <ref:2611.08397#pg1>. That’s a very concrete result for anyone working on constrained comparison problems <ref:2611.08397#pg4>.

Lu: The error isolation protocol itself involves several steps, like building a coarse predictor and then using a bounded-degree bipartite prediction graph H <ref:2611.08397#pg5>. Then they do this "removing right vertices with too many errors" <ref:2611.08397#pg6>.

Meng: That sounds like heavy bookkeeping for error checking. When you’re shipping production models, you don't have time to run multiple iterative cleanup passes <ref:2611.08397#pg5>. What’s the catch there?

Jane: The analysis shows that after log n iterations of the error isolation pass, the expected number of remaining bad edges in H is at most O of n <ref:2611.08397#pg9>. They also show that the total number of edges removed by this isolation procedure is bounded by f over four <ref:2611.08397#pg9>.

Tom: So, in summary, they start with O of n log n expected errors from the prediction function P and then use these isolation steps to drive those down significantly <ref:2611.08397#pg5>. That reduces the number of bad edges in H by a factor of four in expectation per pass <ref:2611.08397#pg9>.

Lu: It’s that iterative refinement that gets them to O of n log four n total queries <ref:2611.08397#pg5>. They combine the prediction-repair algorithm with a subsampling algorithm to estimate the rank of each element in the graph <ref:2611.08397#pg4>.

Jane: It’s a really detailed process, and it shows that even when you're limited by graph structure, you can still achieve near-optimal performance using randomized techniques <ref:2611.08397#pg4>. So, to summarize the main point of "A Near-Optimal Generalized Sorting Algorithm," they’ve shown that generalized sorting is no harder than ordinary sorting up to logarithmic factors in comparison complexity <ref:2611.08397#pg1>.

Title and authors: Tom: Yeah, it’s a statement about the power of randomized algorithms in these structural problems <ref:2611.08397#pg5>. It means we can rely on this O of n log four n expectation when dealing with these comparison constraints <ref:2611.08397#pg4>.

Lu: Looking ahead, they suggest a few things for future work. First, figuring out if generalized sorting can be done with O of n log n queries on every graph, or if some graphs actually require more than that <ref:2611.08397#pg2>.

Meng: And I'm curious about determinism. Is there a way to do this without relying on randomness? If we can get it deterministic, that changes how we deploy these sorting mechanisms in safety-critical systems <ref:2611.08397#pg2>.

Jane: That’s a big question for deployment, Meng, because anything probabilistic introduces uncertainty that production environments hate <ref:2611.08397#pg4>. And then there’s the idea of polynomial-time algorithms using fewer queries <ref:2611.08397#pg2>.

Tom: I think the most interesting thing is that they have been pushing these bounds down to O of n with careful analysis, which is what we saw in their earlier work, leading to an O of n query algorithm after some refinements <ref:2611.08397#pg4>. That’s a lot of engineering work behind the theory <ref:2611.08397#pg4>.

Lu: So, the implication is that for generalized sorting, we are very close to understanding the exact query complexity on every possible graph structure <ref:2611.08397#pg2>. It’s a lot of work to get from O cubed over two down to this log factor relative to n log n <ref:2611.08397#pg1>.

Meng: For my team, the implication is that if we can model our comparison constraints as this type of graph structure, we can expect these near-optimal query counts for sorting problems <ref:2611.08397#pg5>. We need to focus on finding those favorable graph structures <ref:2611.08397#pg3>.

Jane: It’s a solid piece of work showing that the underlying structure of the allowed comparisons matters a lot in determining how efficient we can sort <ref:2611.08397#pg3>. They’ve given us a clear path forward for understanding this problem <ref:2611.08397#pg4>.

Tom: So, to wrap up on "A Near-Optimal Generalized Sorting Algorithm," the main thing is that we can recover the total ordering with O of n log four n queries in expectation, which keeps it up to logarithmic factors over ordinary sorting <ref:2611.08397#pg1>.

Lu: That’s the big number they are providing for this problem <ref:2611.08397#pg4>.

Meng: I'm just glad we have this framework to start looking at how comparison structure affects sorting performance in our models <ref:2611.08397#pg5>.

Jane: It’s a lot of reading, but the core idea is that repeated error isolation lets us systematically clean up predictions until we get a reliable ordering <ref:2611.08397#pg4>. That’s what we have today on generalized sorting <ref:2611.08397#pg1>.

The paper's summary: Tom: So, to recap this paper, they've developed a randomized algorithm for sorting elements when you can only compare them if there's an edge in a graph G connecting them.

Jane: Right, and the main result is that this approach recovers the total ordering using O of n log four n queries in expectation. That's really close to the optimal ordinary sorting bound of Theta of n log n <ref:2611.08397#pg1>.

Tom: It means that for generalized sorting, this randomized method is no harder than standard sorting if you allow those extra logarithmic factors over the comparison count.

Lu: The paper uses a few specific techniques to get there. First, they have a prediction-repair algorithm that uses O of n log n expected errors with O of n log four n comparisons <ref:2611.08397#pg5>.

Jane: And then, they apply an error isolation protocol where you repeatedly remove sets of edges that are "denser" with errors than the rest, which reduces the number of bad edges in the graph H by at least a factor of four in expectation per pass <ref:2611.08397#pg9>.

Tom: So, they combine those two ideas—the prediction and then the systematic cleanup—to get that total query complexity down to O of n log four n <ref:2611.08397#pg5>.

Lu: That combination is what’s actually interesting, because it shows a specific way to handle the constraints imposed by the graph structure.

Jane: What this means for someone listening is that if you have a comparison problem restricted by some graph G, you can achieve very good performance without knowing every single ordering beforehand.

Tom: But there are still questions about how much better this is on certain graphs, and we need to look at what the authors say next.

Lu: Exactly. They're looking into whether this O of n log four n complexity holds for *every* graph, or if some specific graph structures require more queries <ref:2611.08397#pg2>.

Jane: That’s a key point because it tells us how much the structure of the allowed comparisons affects the sorting time.

Tom: And there's always that deterministic question—if we can do this without any randomness, what is the query complexity then <ref:2611.08397#pg2> and does a deterministic algorithm exist using only O of n queries?

Lu: Yes, they are looking into that too, trying to find a deterministic way to solve it with fewer queries than the randomized approach <ref:2611.08397#pg2>.

Jane: So the paper gives us this strong randomized result, but it also points toward what we still need to figure out about the limits of generalized sorting.

The paper's improvements: Tom: So, we're talking about how they improved their original idea for generalized sorting <ref:2611.08397#pg4>. They developed this whole "Repeated Error Isolation Protocol" to systematically clean up the mistakes made by their initial prediction function.

Jane: That protocol is basically a series of refinement steps where you keep removing edges that are too dense with errors until the number of bad edges drops significantly <ref:2611.08397#pg9>. It's like iteratively polishing a rough draft until it's accurate.

Tom: And this cleanup process is what lets them achieve that expected reduction of four times the number of bad edges per pass <ref:2611.08397#pg9>. That’s a big win for accuracy on top of the query count <ref:2611.08397#pg5>.

Lu: What's more, they used this isolation strategy in conjunction with an improved prediction function, which results in O of n log n expected errors using O of n log four n comparisons <ref:2611.08397#pg5>.

Jane: That means the initial prediction isn't terrible, but the cleanup process is what saves the day for getting a reliable ordering <ref:2611.08397#pg5>. It shows that even if your initial guesses are messy, a structured way to isolate and fix those errors works well in expectation.

Tom: From an engineering standpoint, that iterative cleanup gives us confidence in the final result, because we know it's not just one lucky guess <ref:2611.08397#pg5>.

Meng: I have to ask about the cost of this entire protocol. How many total queries are we talking about for all those isolation passes? Because if it’s too much overhead, it won't run on real traffic <ref:2611.08397#pg5>.

Lu: The analysis shows that the total number of queries across all these error isolation steps is bounded by O of n log three n <ref:2611.08397#pg5>. That keeps the overall query complexity manageable <ref:2611.08397#pg5>.

Jane: So, to put it plainly, this paper shows that you can take a complex sorting problem with graph constraints and use a structured error-reduction method to get a reliable answer in O of n log four n queries total <ref:2611.08397#pg1>.

Tom: It's about making the process robust, not just finding one perfect comparison set <ref:2611.08397#pg4>.

Lu: And this leads directly into the next big question they raise—whether this O of n log four n complexity actually holds for every single graph structure or if some graphs are inherently harder <ref:2611.08397#pg2>.

Conclusion: Tom: So, to wrap up on "A Near-Optimal Generalized Sorting Algorithm," they've shown that you can recover the total ordering using O of n log four n queries in expectation <ref:2611.08397#pg1>.

Jane: That's a huge win because it keeps the query complexity up to logarithmic factors over ordinary sorting <ref:2611.08397#pg1>. It really shows how much the structure of your allowed comparisons matters in determining how efficient you can sort something.

Lu: The main implication is that for many graph structures, this randomized approach provides a near-optimal way to handle those constrained comparison problems <ref:2611.08397#pg4>.

Meng: But I still have to ask about determinism—does this O of n log four n query count apply to every graph, or are there specific graphs where you're going to need more than that <ref:2611.08397#pg2>?

Jane: That’s the big question for deployment, Meng. If we can't guarantee it works on every possible graph, then we can't rely on this for critical systems <ref:2611.08397#pg4>.

Tom: So, the paper gives us a very solid randomized method to get close to optimal performance <ref:2611.08397#pg5>.

Lu: And they've pointed toward the next steps, looking into how this complexity scales and whether a deterministic version is even possible with fewer queries <ref:2611.08397#pg2>.

Jane: It's clear that understanding the limits of generalized sorting, as explored in "A Near-Optimal Generalized Sorting Algorithm," is still a deep area of research for AI and computer science.

Sanjeev Khanna, Aaron Putterman, Junkai Song

Courant Institute, New York University · School of Engineering and Applied Sciences, Harvard University

cs.DS

Submitted: 2026-11-05

Updated: 2026-11-05

License: http://creativecommons.org/licenses/by-nc-sa/4.0/

Importance score: 98/100

The gist: Generalized sorting is studied as a variant of ordinary sorting where only certain comparisons are allowed based on an underlying graph G…

Key concepts

Generalized Sorting
This is a problem where you need to find the correct total ordering of elements based only on comparisons allowed by a specific graph structure. Unlike standard sorting, only certain pairs can be compared based on the edges in that graph.
Prediction Construction
This phase builds an initial guess for the correct ordering. It works by repeatedly partitioning edges into those that are postponed (uncertain) and those that are predicted, using a lemma to manage expected errors while reducing the set of unresolved comparisons.
Error Isolation Protocol
This is a refinement step where the algorithm iteratively removes sets of edges from consideration. It focuses on eliminating 'denser' areas of error until the remaining set is sparse, ensuring that subsequent predictions are more accurate and reducing total errors in expectation.

Terminology

Summary

Generalized sorting is studied as a variant of ordinary sorting where only certain comparisons are allowed based on an underlying graph G, and this paper presents a randomized algorithm that recovers the total ordering using O(n log4 n) queries in expectation, showing it is no harder than ordinary sorting up to logarithmic factors

Main Result Summary

Our main result nearly settles this question: we show that the query complexity of generalized sorting matches that of ordinary sorting up to polylogarithmic factors. Our main theorem is the following: There is a randomized algorithm that, for every graph G = (V, E) on n vertices and every hidden ordering π of V such that (π(i), π(i + 1)) ∈ E for all i ∈ [n − 1], recovers π using O(n log4 n) queries in expectation. p. 3

Where the paper says it

Our main theorem is the following: Theorem 1. There is a randomized algorithm that, for every graph G = (V, E) on n vertices and every hidden ordering π of V such that (π(i), π(i + 1)) ∈ E for all i ∈ [n − 1], recovers π using O(n log4 n) queries in expectation.

Prediction Construction

The algorithm proceeds in phases, where the progress made is summarized by Lemma 2.2, which states that for any subset of edges F, there is a randomized algorithm that makes O(n log3 n) comparisons and partitions F into a postponed set F' and a set of predicted edges F whose expected number of incorrect predictions on F' is at most O(n). By repeatedly applying this lemma to the postponed edges, the number of unresolved edges decreases by half in each phase, leading to a prediction function P with O(n log n) many expected errors using O(n log4 n) comparisons in total. p. 6

Where the paper says it

For any subset of edges F, there is a randomized algorithm that makes O(n log3 n) comparisons and partitions F into a postponed set F ′ and a set of predicted edges F \ F ′ such that |F ′ | ≤ |F|/2 and the expected number of incorrect predictions on F \ F ′ is at most O(n). By repeatedly applying the lemma to the postponed edges, the number of unresolved edges decreases by half in each phase.

Error Isolation Protocol

The core idea is to iteratively refine a prediction of edge orientations by gradually removing sets of edges that are “denser” with errors than the remaining edges. This involves several steps:

  1. Building a Coarse Predictor, which uses O˜(n) queries to construct a prediction for F with O(f / log2 n) errors. p. 6

    Where the paper says it

    We begin by describing a procedure that produces a coarse prediction of the orientations of the edges in F. 1 Building a Coarse Predictor In this section, we describe the coarse prediction routine, which uses O˜(n) queries to construct a prediction for F with O(f / log2 n) errors.

  2. Building a Bounded-Degree Bipartite Prediction Graph H, where the maximum degree of any vertex is at most d = ⌈f /n⌉. p. 7

    Where the paper says it

    2 Building a Bounded-Degree Bipartite Prediction Graph We next transform G[F] into a bipartite graph with maximum degree O(f /n), which will be useful in our algorithm and analysis. To start, we duplicate the vertex set V , creating a left copy L and a right copy R.

  3. Removing Right Vertices with Too Many Errors, which involves querying sampled edges and flagging right vertices incident to too many bad edges. p. 7

    Where the paper says it

    Let w = distF (π, σ) be the total number of bad edges. The next step of our algorithm identifies and removes right vertices that are incident to too many bad edges.

  4. The Error Isolation Protocol, which selects a candidate removal set Cτ′ that misses the fewest validation edges by using a sample of 2 10s log n bad, validation edges. p. 8

    Where the paper says it

    4 The Error Isolation Protocol In this section, we describe the error isolation protocol. We use positive integers s and t as parameters of our protocol, and use w to denote the number of bad edges (errors) in the current graph H under consideration.

Performance Analysis

The analysis shows that after log n iterations of the error isolation pass, the expected number of remaining bad edges in H is at most O(n). Furthermore, the total number of edges removed by the error isolation procedure is bounded by f /4. p. 4

Where the paper says it

One can then see that across log(n) rounds of this procedure, the number of mispredictions decreases to ≈ O(n), while the number of removed edges scales as ≈ m 2 log(n) · log(n) = m/2. Of course, this still leaves the task of designing this single round procedure, which we dub the error isolation protocol.

The total number of queries made across all steps is bounded by O(n log3 n). p. 3
Where the paper says it

The expected number of incorrect predictions on F \ T is O(n). The total number of queries made is O(n log3 (n)).

Future Directions

Three natural directions for future work are highlighted: 1) Closing the remaining gap, asking if generalized sorting can be done with O(n log n) queries on every graph or if some graphs require ω(n log n) queries. 2) Deterministic algorithms, inquiring about the deterministic query complexity and whether a deterministic algorithm using O˜(n) queries exists. p. 5

Where the paper says it

Similar to previous algorithms for sorting on arbitrary graphs [HKK11,KN22], our algorithm is randomized. What is the deterministic query complexity of generalized sorting?

3) Polynomial-time algorithms, focusing on whether a polynomial-time algorithm can use O˜(n) or even n 3/2−omega(1) queries. p. 5
Where the paper says it

We focus on query complexity, and as stated, our algorithm does not run in polynomial time. Is there a polynomial-time algorithm that uses O˜(n) queries, or even n 3/2−Ω(1) queries?

AI Disclosure

ChatGPT 6-Astra was essential in proving the improved bounds, specifically an O˜(n log4 n) query algorithm which combined the prediction-repair algorithm of [LRSZ20] with a subsampling algorithm to estimate the rank of each element in the graph. The authors subsequently identified a way to further reduce the number of queries by relying on careful implications in the graph structure, and after several refinements, achieved O˜(n) many queries. p. 2

Where the paper says it

In many natural settings, however, the comparison graph has no such structure. As a motivating example from [HKK11], consider several candidates applying for the same job, together with a set of references for these candidates.

ChatGPT 6-Astra Ultra/Pro and 6.1-Sol Ultra were then prompted dozens of times with these generalized sorting algorithms over the course of several weeks, tasked with finding an improvement. p. 2
Where the paper says it

Subsequent works extended [HKK11] in several directions, but none improved the O˜(n 3/2 ) bound for arbitrary graphs, which has stood since 2011. For instance, Kuszmaul and Narayanan [KN22] showed that when G has m edges, generalized sorting can be done with Oe( √ mn) queries; however, when m = Ω(n 2 ), this provides no improvement over [HKK11].

Several improvements were found, including first, an O˜(n 10/9) query algorithm, then an O˜(n 17/16), and then an O˜(n 19/18) query algorithm, before eventually discovering the O˜(n) query algorithm presented here. p. 2
Where the paper says it

For a decade after [CFG+00], no o(n 2 )-query algorithm was known, until Huang, Kannan, and Khanna [HKK11] showed that generalized sorting is possible with O˜(n 3/2 ) queries. Subsequent works extended [HKK11] in several directions, but none improved the O˜(n 3/2 ) bound for arbitrary graphs, which has stood since 2011.

The only shared pieces are merely high-level architectural choices like (a) doing efficient prediction-repair and (b) sampling vertices to estimate statistics of other vertices. p. 4
Where the paper says it

The second condition is less intuitive; but is roughly designed with the goal of capturing errors that are not observed in our random sampling. This is because if a left vertex has a high score, then none of the sampled vertices appearing early in τ are neighbors of this left vertex.

References

[ABF+94] Noga Alon, Manuel Blum, Amos Fiat, Sampath Kannan, Moni Naor, and Rafail Ostrovsky. Matching nuts and bolts. p. 5

Where the paper says it

In particular, is there a deterministic algorithm that uses O˜(n) queries? Even for nuts and bolts, where a simple randomized variant of QuickSort uses O(n log n) comparisons in expectation, matching this bound deterministically took a sequence of works [ABF+94,ABF96,KMS98].

In Proceedings of the Fifth Annual SIAM Symposium on Discrete Algorithms, pages 690–696, 1994

[ABF96] Noga Alon, Phillip G Bradford, and Rudolf Fleischer. Matching nuts and bolts faster. p. 5

Where the paper says it

In particular, is there a deterministic algorithm that uses O˜(n) queries? Even for nuts and bolts, where a simple randomized variant of QuickSort uses O(n log n) comparisons in expectation, matching this bound deterministically took a sequence of works [ABF+94,ABF96,KMS98].

Information processing letters, 59(3):123–127, 1996

[AKM08] Stanislav Angelov, Keshav Kunal, and Andrew McGregor. Sorting and selection with random costs. p. 2

Where the paper says it

Subsequent work studied sorting and selection when comparison costs are structured, e. , monotone or metric [GK01,KK03,GK05], or random [AKM08].

In LATIN 2008: Theoretical Informatics, 8th Latin American Symposium, volume 4957 of Lecture Notes in Computer Science, pages 48–59. Springer, 2008

[BJR17] Arindam Biswas, Varunkumar Jayapaul, and Venkatesh Raman. Improved bounds for poset sorting in the forbidden-comparison regime. p. 2

Where the paper says it

For a decade after [CFG+00], no o(n 2 )-query algorithm was known, until Huang, Kannan, and Khanna [HKK11] showed that generalized sorting is possible with O˜(n 3/2 ) queries. Subsequent works extended [HKK11] in several directions, but none improved the O˜(n 3/2 ) bound for arbitrary graphs, which has stood since 2011.

In Conference on Algorithms and Discrete Applied Mathematics, pages 50–59. p. 0
Where the paper says it

khanna@nyu. †School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts, USA.

Springer, 2017

[BR16] Avah Banerjee and Dana Richards. Sorting under forbidden comparisons. p. 0

Where the paper says it

There are n elements and an (initially hidden) total ordering π over them. Unlike in ordinary sorting, however, only some comparisons are allowed: those given by the edges of an undirected graph G = (V, E) on the elements.

2016

[CFG+00] Moses Charikar, Ronald Fagin, Venkatesan Guruswami, Jon Kleinberg, Prabhakar Raghavan, and Amit Sahai. Query strategies for priced information. p. 2

Where the paper says it

Charikar et al. [CFG+00] initiated the study of query strategies for priced information and observed that sorting with priced comparisons appears highly non-trivial.

In Proceedings of the thirty-second annual ACM symposium on Theory of computing, pages 582–591, 2000

[CSW23] T-H Hubert Chan, Enze Sun, and Bo Wang. Generalized sorting with predictions revisited. p. 3

Where the paper says it

graph (with the promised Hamiltonian path added), generalized sorting can be done with O˜(n) queries in expectation. In a different direction, Lu, Ren, Sun, and Zhang [LRSZ20] studied generalized sorting with predictions, where one is given a prediction function P : E → {←,→} that predicts the orientation of every edge of G.

In International Workshop on Frontiers in Algorithmics, pages 29–41. Springer, 2023

[GJ22] Mayank Goswami and Riko Jacob. On instance-optimal algorithms for a generalization of nuts and bolts and generalized sorting. p. 2

Where the paper says it

For instance, when G = Kn, this is the ordinary sorting problem, for which a myriad of algorithms and lower bounds establish that Θ(n log n) comparisons are necessary and sufficient. When G is instead the complete bipartite graph Kn/2,n/2 , this recovers the famous “sorting nuts and bolts” problem, where only elements on different sides of the bipartition can be compared (nuts cannot be compared with nuts, nor bolts with bolts).

arXiv preprint arXiv:2211. p. 0
Where the paper says it

Email: junkaisong@nyu. arXiv:2611.

04601, 2022

[GJ23] Mayank Goswami and Riko Jacob. An algorithm for bichromatic sorting with polylog competitive ratio. p. 0

Where the paper says it

A Near-Optimal Generalized Sorting Algorithm Sanjeev Khanna∗ Aaron Putterman† Junkai Song‡ November 6, 2026 Abstract We continue the study of the classic generalized sorting problem, a basic variant of ordinary sorting. There are n elements and an (initially hidden) total ordering π over them.

arXiv preprint arXiv:2311. p. 0
Where the paper says it

Email: junkaisong@nyu. arXiv:2611.

05773, 2023

[GK01] Anupam Gupta and Amit Kumar. Sorting and selection with structured costs. p. 2

Where the paper says it

[CFG+00] initiated the study of query strategies for priced information and observed that sorting with priced comparisons appears highly non-trivial. Subsequent work studied sorting and selection when comparison costs are structured, e.

In 42nd Annual Symposium on Foundations of Computer Science, FOCS, pages 416–425. p. 0
Where the paper says it

In ordinary sorting, Θ(n log n) comparisons are necessary and sufficient. For generalized sorting, however, the best known upper bound has been O˜(n 3/2 ) since the work of Huang, Kannan, and Khanna (FOCS 2011), who even asked whether the problem might in fact require n 1+Ω(1) comparisons.

IEEE Computer Society, 2001

[GK05] Anupam Gupta and Amit Kumar. Where’s the winner? max-finding and sorting with metric costs. p. 2

Where the paper says it

Subsequent work studied sorting and selection when comparison costs are structured, e. , monotone or metric [GK01,KK03,GK05], or random [AKM08].

In Proceedings of APPROX-RANDOM 2005, volume 3624 of Lecture Notes in Computer Science, pages 74–85. Springer, 2005

[HKK11] Zhiyi Huang, Sampath Kannan, and Sanjeev Khanna. Algorithms for the generalized sorting problem. p. 2

Where the paper says it

Variants of generalized sorting, however, date back several decades. For instance, when G = Kn, this is the ordinary sorting problem, for which a myriad of algorithms and lower bounds establish that Θ(n log n) comparisons are necessary and sufficient.

In 2011 IEEE 52nd Annual Symposium on Foundations of Computer Science, pages 738–747. p. 0
Where the paper says it

In ordinary sorting, Θ(n log n) comparisons are necessary and sufficient. For generalized sorting, however, the best known upper bound has been O˜(n 3/2 ) since the work of Huang, Kannan, and Khanna (FOCS 2011), who even asked whether the problem might in fact require n 1+Ω(1) comparisons.

IEEE, 2011

[JWZZ23] Shaofeng H-C Jiang, Wenqian Wang, Yubo Zhang, and Yuhao Zhang. Algorithms for the generalized poset sorting problem. p. 2

Where the paper says it

Variants of generalized sorting, however, date back several decades. For instance, when G = Kn, this is the ordinary sorting problem, for which a myriad of algorithms and lower bounds establish that Θ(n log n) comparisons are necessary and sufficient.

arXiv preprint arXiv:2304. p. 0
Where the paper says it

Email: junkaisong@nyu. arXiv:2611.

01623, 2023

[KK03] Sampath Kannan and Sanjeev Khanna. Selection with monotone comparison cost. p. 2

Where the paper says it

Subsequent work studied sorting and selection when comparison costs are structured, e. , monotone or metric [GK01,KK03,GK05], or random [AKM08].

In Proceedings of the Fourteenth Annual ACM-SIAM Symposium on Discrete Algorithms, pages 10–17. p. 2
Where the paper says it

Variants of generalized sorting, however, date back several decades. For instance, when G = Kn, this is the ordinary sorting problem, for which a myriad of algorithms and lower bounds establish that Θ(n log n) comparisons are necessary and sufficient.

ACM/SIAM, 2003

[KMS98] J´anos Koml´os, Yuan Ma, and Endre Szemer´edi. Matching nuts and bolts in o (n log n) time. p. 5

Where the paper says it

Even for nuts and bolts, where a simple randomized variant of QuickSort uses O(n log n) comparisons in expectation, matching this bound deterministically took a sequence of works [ABF+94,ABF96,KMS98]. Polynomial-time algorithms.

SIAM Journal on Discrete Mathematics, 11(3):347–372, 1998

[KN22] William Kuszmaul and Shyam Narayanan. Stochastic and worst-case generalized sorting revisited. p. 2

Where the paper says it

To ensure that the instance is sortable, we assume that (π(i), π(i + 1)) ∈ E for every i ∈ [n − 1], or equivalently, that G contains the Hamiltonian path given by π. Generalized sorting is the special case of sorting with priced comparisons in which every comparison costs either 1 or ∞.

In 2021 IEEE 62nd Annual Symposium on Foundations of Computer Science (FOCS), pages 1056–1067, IEEE, 2022

[LRSZ20] Pinyan Lu, Xuandi Ren, Enze Sun, and Yubo Zhang. Generalized sorting with predictions. p. 3

Where the paper says it

graph (with the promised Hamiltonian path added), generalized sorting can be done with O˜(n) queries in expectation. In a different direction, Lu, Ren, Sun, and Zhang [LRSZ20] studied generalized sorting with predictions, where one is given a prediction function P : E → {←,→} that predicts the orientation of every edge of G.

arXiv preprint arXiv:2011. p. 0
Where the paper says it

Email: junkaisong@nyu. arXiv:2611.

00172, 2020

--- Page 4 ---

Contents

1 Introduction 1

1.1 Our Main Result. p. 1

Where the paper says it

Contents 1 Introduction 1 1. 1 Our Main Result .

.............)

--- Page 5 ---

Abstract

We continue the study of the classic generalized sorting problem, a basic variant of ordinary sorting: we are given a universe of elements [n] with a hidden total ordering π over them, and we may query (i.e., compare) pairs of elements. p. 2

Where the paper says it

This problem is a basic variant of ordinary sorting: we are given a universe of elements [n] with a hidden total ordering π, and we may query (i. , compare) pairs of elements.

Unlike in ordinary sorting, however, only some comparisons are allowed: those given by the edges of an undirected graph G = ([n], E) on the elements

--- Page 6 ---

2 Overview 4

We begin by defining the distance between two orderings or predictions. Definition 2. p. 5

Where the paper says it

2 Overview We begin by defining the distance between two orderings or predictions. Definition 2.

1 For a graph G = (V, E), two total orderings π, σ over V, and a subset of edges F ⊆ E, we define distF (π, σ) = X(u,v)∈F 1[1[u ≺π v] ≠ 1[u ≺σ v]]

--- Page 7 ---

3 Repeated Error Isolation for Near-Optimal Generalized Sorting 5

3.4 The Error Isolation Protocol. p. 1

Where the paper says it

3 Removing Right Vertices with Too Many Errors . 4 The Error Isolation Protocol .

.......)

--- Page 8 ---

4 AI Disclosure 12

--- Page 9 ---

Claim 3.6 Suppose the current graph H contains w ≥ n bad edges. p. 8

Where the paper says it

4 The Error Isolation Protocol In this section, we describe the error isolation protocol. We use positive integers s and t as parameters of our protocol, and use w to denote the number of bad edges (errors) in the current graph H under consideration.

Then, with probability at least 15/16, among the sample of 16d · (s + 210s log n) edges, there will be s + 210s log n bad edges

--- Page 9 ---

Claim 3.8 Let τ′ denote the permutation whose candidate removal set Cτ′ misses the fewest of the 2 10s log(n) validation edges. p. 9

Where the paper says it

For each sampled multiset S, let τ ∗ denote the ordering of vertices in S induced by their relative order in the true permutation π. Then, we have ES[number of bad edges in (H \ Cτ ∗ )] ≤ |L| · w (s + 1)t .

If the current graph H contains w ≥ n bad edges, then after a single pass, E[number of remaining bad edges in H] ≤ w/4

--- Page 9 ---

Claim 3.10 Let H initially contain f edges. p. 9

Where the paper says it

Let Qv denote the set of edges connecting v to its selected neighbors. Finally, let Cτ contain (1) all edges incident to a marked left vertex u ∈ L, and (2) for every v ∈ R, the t edges going to its highest score left neighbors.

Then, with probability at least 1 - 2/n10, the flagging step and the subsequent log n error isolation passes together remove at most f /2 edges

--- Page 9 ---

Claim 3.4 Assuming the good events in Claim 3. p. 8

Where the paper says it

The following claim bounds the number of removed edges. Assuming the good events in Claim 3.

1 and Claim 3. p. 6
Where the paper says it

Note that such a permutation must exist, since the true permutation π agrees with all reported orientations. For this permutation σ, we have the following claim: Claim 3.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved Query Complexity for Generalized Sorting

The system can now recover a total ordering from an arbitrary graph comparison structure using O(n log 4 n) queries in expectation, which is up to logarithmic factors of the optimal ordinary sorting bound of Theta(n log n).

  1. Prediction-Repair Algorithm Implementation

The system can construct a prediction function with O(n log n) expected errors using O(n log 4 n) comparisons by iteratively applying the lemma that partitions a subset of edges into a postponed set and a predicted set.

  1. Error Isolation Protocol Application

The system can refine its predictions by identifying and removing sets of edges that are denser with errors than the remaining ones, reducing the number of bad edges in H by at least a factor of 4 in expectation per pass.

Abstract

We continue the study of the classic generalized sorting problem, a basic variant of ordinary sorting. There are n elements and an (initially hidden) total ordering π over them. Unlike in ordinary sorting, however, only some comparisons are allowed: those given by the edges of an undirected graph G = (V, E) on the elements. How many comparisons are needed to find the total ordering? In ordinary sorting, Θ(n n) comparisons are necessary and sufficient. For generalized sorting, however, the best known upper bound has been O tilde(n 3/2) since the work of Huang, Kannan, and Khanna (FOCS 2011), who even asked whether the problem might in fact require n 1+Ω(1) comparisons. We show that it does not: we give a randomized algorithm that uses O(n 4 n) comparisons in expectation. Thus, up to logarithmic factors, generalized sorting is no harder than ordinary sorting.

Sources

Related papers