When Less is More: Emerging Network-Wide Use Cases for Hollow-Core Fibers in Optical Networks [Invited]
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.
Tom: We're looking at the paper: "When Less is More".
Jane: Here's the gist of the paper. Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering ∼30% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0.05–0.1 dB/km), and nonlinearities reduced by three to four orders of magnitude Emerging Network Use Cases The paper overviews four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks.
Tom: These use cases include: i) latency-constrained Edge Data Center (edgeDC) consolidation.
Jane: ii) energy-efficient high-power amplification.
Tom: iii) capacity scaling via single-fiber bidirectional (BiDi) transmission.
Paper summary: Tom: So, wrapping up the "When Less is More: Emerging Network-Wide Use Cases for Hollow-Core Fibers in Optical Networks Invited" paper. The unifying message here is that HCF is not going to replace standard single-mode fiber wholesale.
Jane: It suggests that HCF will coexist with SMF in a heterogeneous ecosystem where the type of fiber, the placement strategy, and the optimization objectives are all tightly coupled to what you're trying to achieve at that specific network segment <ref:2611.08389#pg2>.
Lu: And this requires a shift in thinking toward multi-objective, multi-use-case network design frameworks and integrated techno-economic analysis for any real deployment plan <ref:2611.08389#pg2>.
Meng: I see that the practical implication is that engineers need to stop looking for one perfect fiber and start designing systems where different fibers serve different, optimized functions <ref:2611.08389#pg3>.
Lalam: It really boils down to tailoring the HCF type and its placement strategy directly to the specific use case you are targeting <ref:2611.08389#pg2>.
Tom: That’s it for this discussion on HCF and hybrid networks today. The paper shows that success comes from precision, not just power.
Conclusion: Tom: So, we're at the end of this paper on Hollow-Core Fiber called "When Less is More: Emerging Network-Wide Use Cases for Hollow-Core Fibers in Optical Networks." It’s all about how you use this new fiber type selectively instead of trying to replace everything.
Jane: Right. So, what’s the big picture here? The authors are showing that HCF isn't a magic replacement for standard fiber yet. It’s about finding the right spot to put it for specific jobs.
Lu: Exactly. They lay out four main use cases: low latency data centers, better power amplification, scaling capacity with bidirectional transmission, and mixing classical and quantum signals.
Meng: I'm interested in the deployment part. The results show that you don't need to upgrade your whole network to see a big payoff. It’s about picking just a small portion of the fiber length for these specific needs.
Lalam: And they give some numbers on that budget. For instance, if you want fewer edge data centers, only around six to twenty four percent of the total network fiber length is needed to get up to fifty percent fewer edge data centers.
Tom: That’s a concrete number for something complex. So, what does this mean for the real world? It suggests we should stop thinking about one giant switch and start thinking about these tailored deployments.
Jane: It means designing systems where different fiber types work together, each doing what it’s best at, based on the specific traffic or signal you’re handling.
Lu: The paper emphasizes that this requires a new way of designing those networks—a multi-objective framework that considers both the performance and the cost of deploying different fiber types.
Meng: From my side, it means we need better tools to figure out where to place these fibers so they actually do what they’re supposed to do without causing headaches at scale.
Lalam: I'm pretty sure this is about moving from a single network design plan to a set of optimized plans for different parts of the network.
Tom: That’s the core idea. So, we see HCF as a tool, not just a replacement material, depending on what you need to achieve in that specific segment. Next up, we're going to look at some of the specific technical hurdles they mentioned for making this work in production environments.
MËMËDHE IBRAHIMI, GIOVANNI SIMONE STICCA, ANGELO FERRARA, FRANCESCO MUSUMECI, MASSIMO TORNATORE
Politecnico di Milano
cs.ET, cs.NI
Submitted: 2026-11-05
Updated: 2026-11-05
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 87/100
The gist: Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering ∼30% lower propagation latency than standard Single-Mode Fiber (SMF)…
Key concepts
- Hollow-Core Fiber (HCF)
- A special type of fiber where the light travels through an air core instead of a solid glass core. This design allows for much lower propagation latency and reduced signal nonlinearities, making it ideal for demanding network applications like low-latency data centers.
- Edge Data Center (edgeDC) Consolidation
- A network strategy to reduce the total number of physical edge data centers by using HCF. By deploying HCF in specific segments, operators can achieve significant consolidation benefits, requiring only a small percentage of the total fiber length to realize up to 50% fewer data centers.
- Nonlinearity Reduction
- A measure of how much the signal's behavior changes when passing through optical components. HCF significantly reduces these nonlinearities—by three to four orders of magnitude—which is crucial for efficiently amplifying high-power signals without distortion in energy-efficient systems.
Terminology
Summary
Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering ∼30% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0. p. 0 ibrahimi@polimi. it
Compiled November 6, 2026
Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks,
offering ∼30% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation
(0.Where the paper says it
Emerging Network Use Cases
The paper overviews four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks. These use cases include:
i) latency-constrained Edge Data Center (edgeDC) consolidation.
ii) energy-efficient high-power amplification. p. 0 The required HCF
budget is use-case-specific, i. , ∼6–24% of the total network fiber length for edgeDC consolidation (up to
50% fewer edgeDCs), ∼40% of the network links for QKD/classical coexistence (up to 38% fewer quantum
modules), and ∼40–60% of the network links for energy-efficient capacity scaling via BiDi-HCF (up to 28%
lower network power per Tbps and 70% more served traffic, at half the HCF strand count of a unidirectional
HCF upgrade), whereas for energy-efficient high-power amplification the gain keeps growing with the
HCF budget (up to 60% lower network power per Tbps at the national scale) and what saturates is the
benefit of increasing the EDFA output power.Where the paper says it
iii) capacity scaling via single-fiber bidirectional (BiDi) transmission. p. 0 , Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call
for a systematic assessment of the impact of HCF at the network level. Building on a series of prior
contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in
hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energyefficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission;
and (iv) coexistence of classical and quantum (QKD) channels. p. 0 , Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call
for a systematic assessment of the impact of HCF at the network level. Building on a series of prior
contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in
hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energyefficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission;
and (iv) coexistence of classical and quantum (QKD) channels.Where the paper says it
Where the paper says it
iv) coexistence of classical and quantum (QKD) channels.
State of the Art in HCF Technology
Advances in HCF design have led to significant improvements in key performance metrics. Key progress includes:
- Attenuation has fallen by an order of magnitude, reaching values between 0.05 and 0.1 dB/km [2–4].
**- Inter-Modal Interference (IMI) has been reduced from −35 to −63. p. 2 05 dB/km
(2025), 0. 040 dB/km (2026)
[2–4, 26, 27]
Inter-Modal Interference
Improved core/cladding geometry,
mode stripping, gap-tube designs
Reduced from −35 to −63. 003 dB/km (2026) [2–4, 26, 27]. Table 1 details this progression, together with the parallel improvements in Inter-Modal Interference (IMI), now below the
−60 dB/km penalty threshold [5, 27] (and further mitigated at
the system level by digital subcarrier multiplexing [28]), and in
SMF–HCF splicing, down to 0.Where the paper says it
Where the paper says it
**- SMF–HCF splicing loss has been reduced to 0. p. 2 040 dB/km (2026)
[2–4, 26, 27]
Inter-Modal Interference
Improved core/cladding geometry,
mode stripping, gap-tube designs
Reduced from −35 to −63. 2 dB/km, below the
−60 dB/km penalty threshold
[5, 27]
SMF–HCF splicing Low-loss, anti-reflection-coated, fielddeployable interconnection
From ∼0. Table 1 details this progression, together with the parallel improvements in Inter-Modal Interference (IMI), now below the
−60 dB/km penalty threshold [5, 27] (and further mitigated at
the system level by digital subcarrier multiplexing [28]), and in
SMF–HCF splicing, down to 0. 05 dB with automated, fielddeployable procedures [29–32].Where the paper says it
Where the paper says it
The maturation of HCF has triggered rapid industrial uptake by hyperscalers and telecom operators. p. 1 A further review of HCF design
and fabrication is beyond the scope of this paper, and we refer
the interested reader to [2, 25, 34]. Practical Deployments and Industrial Roadmaps
The maturation of HCF has triggered a rapid industrial uptake.Where the paper says it
Network-Level Deployment Analysis
Consolidated results across realistic metro, national, and continental topologies convey a unifying message regarding selective HCF upgrade. The required HCF budget is use-case specific, showing that a limited and well-placed amount of HCF captures a significant share of the achievable benefit compared to a network overhaul. p. 0 Consolidated results across realistic metro,
national, and continental topologies convey a unifying message: in each use case, a selective HCF upgrade
captures a significant share of the achievable benefit compared to a network overhaul. The required HCF
budget is use-case-specific, i. The required HCF
budget is use-case-specific, i. , ∼6–24% of the total network fiber length for edgeDC consolidation (up to
50% fewer edgeDCs), ∼40% of the network links for QKD/classical coexistence (up to 38% fewer quantum
modules), and ∼40–60% of the network links for energy-efficient capacity scaling via BiDi-HCF (up to 28%
lower network power per Tbps and 70% more served traffic, at half the HCF strand count of a unidirectional
HCF upgrade), whereas for energy-efficient high-power amplification the gain keeps growing with the
HCF budget (up to 60% lower network power per Tbps at the national scale) and what saturates is the
benefit of increasing the EDFA output power.Where the paper says it
Where the paper says it
Use Case Specific Benefits
The advantages of HCF are tied to specific physical properties that align with different network needs. These include:
**- Low latency for latency-constrained edgeDC consolidation. **
**- Reduced nonlinearity for energy-efficient high-power amplification. p. 1 We provide a summary table with the main dimensions along which HCF has progressed and the use cases
for which HCF has been shown to be useful (§2). We review and consolidate four use cases for the selective
deployment of HCF in next-generation optical networks
(§3), namely:
(a) Edge Data Center consolidation in latency-constrained
metro/regional networks [17, 20];
(b) Energy-efficient high-power amplification in continental and national topologies, leveraging the ultra-low
nonlinearity of HCF and emerging energy-efficient
ZR/ZR+ pluggable transponders [18, 22];
(c) Capacity scaling via hybrid SMF/HCF networks and
via the emerging opportunity of single-fiber bidirectional HCF (BiDi-HCF) transmission [19, 24];
(d) Coexistence of classical and quantum (QKD) channels in
metro-area networks (HCF removes the spontaneous
Raman scattering penalty constraining SMF [23]).Where the paper says it
**- Low Rayleigh backscattering for capacity scaling via BiDi-HCF transmission. p. 1 We provide a summary table with the main dimensions along which HCF has progressed and the use cases
for which HCF has been shown to be useful (§2). We review and consolidate four use cases for the selective
deployment of HCF in next-generation optical networks
(§3), namely:
(a) Edge Data Center consolidation in latency-constrained
metro/regional networks [17, 20];
(b) Energy-efficient high-power amplification in continental and national topologies, leveraging the ultra-low
nonlinearity of HCF and emerging energy-efficient
ZR/ZR+ pluggable transponders [18, 22];
(c) Capacity scaling via hybrid SMF/HCF networks and
via the emerging opportunity of single-fiber bidirectional HCF (BiDi-HCF) transmission [19, 24];
(d) Coexistence of classical and quantum (QKD) channels in
metro-area networks (HCF removes the spontaneous
Raman scattering penalty constraining SMF [23]).Where the paper says it
**- Raman suppression for QKD/classical coexistence. p. 1 We provide a summary table with the main dimensions along which HCF has progressed and the use cases
for which HCF has been shown to be useful (§2). We review and consolidate four use cases for the selective
deployment of HCF in next-generation optical networks
(§3), namely:
(a) Edge Data Center consolidation in latency-constrained
metro/regional networks [17, 20];
(b) Energy-efficient high-power amplification in continental and national topologies, leveraging the ultra-low
nonlinearity of HCF and emerging energy-efficient
ZR/ZR+ pluggable transponders [18, 22];
(c) Capacity scaling via hybrid SMF/HCF networks and
via the emerging opportunity of single-fiber bidirectional HCF (BiDi-HCF) transmission [19, 24];
(d) Coexistence of classical and quantum (QKD) channels in
metro-area networks (HCF removes the spontaneous
Raman scattering penalty constraining SMF [23]).Where the paper says it
Limitations and Future Directions
Current studies face limitations, notably the absence of a reliable HCF cost model. Open challenges include manufacturing scale-up, standardization across vendors, and long-term reliability under environmental stress. p. 9 Long-term reliability and aging. As HCF relies on light propagation in an air-filled core, long-term reliability under realistic
environmental conditions (temperature cycles, humidity, gas
ingress, silica aging, micro-bend stress) must be demonstrated
through multi-year lifetime tests. This suggests that HCF will be deployed not as a single
“one-size-fits-all” fiber, but as a family of fibers, each tailored to
a specific network segment and use case. This is a significant departure from the SMF paradigm and has important implications
for production, standardization, and procurement.Where the paper says it
Where the paper says it
Conclusion
The unifying message is that HCF is likely to coexist with SMF in a heterogeneous fiber ecosystem, in which the HCF type, the placement strategy, and the optimization objectives are tightly coupled to the targeted use case and network segment. This calls for multi-objective, multi-use-case network-design frameworks and integrated techno-economic analysis. p. 9 HCF-type specialization by use case and network segment. A peculiarity of HCF, compared to SMF, is that the optimal fiber
design is not the same across use cases: (i) latency-oriented deployments (DCI, edgeDC consolidation) prioritize propagation
latency and tolerate moderate attenuation; (ii) capacity-oriented
deployments (backbone, multi-band) prioritize ultra-low attenuation and wide bandwidth; (iii) QKD-oriented deployments
prioritize ultra-low scattering and crosstalk (e.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved network design for edge data centers by using a lexicographic tier-aware objective in MILP modeling, allowing optimization to prioritize placing edge DCs on Core/Backbone nodes when minimizing the total number of deployed edge DCs.
-
Enhanced energy-efficient high-power amplification systems by incorporating transponder power consumption modeled from vendor datasheets and 400G ZR+ pluggables into the ROMA heuristic for joint maximization of served traffic and minimization of total network power.
-
Advanced capacity scaling systems via single-fiber bidirectional transmission by implementing a Genetic Algorithm to jointly optimize fiber type assignment (Uni-SMF, Uni-HCF, or BiDi-HCF), RMSA of demands, and TXP type selection based on a weighted objective balancing power consumption and served traffic.
-
Robust QKD/classical coexistence systems by employing a Genetic Algorithm to place quantum modules at endpoints or intermediate trusted relays to minimize the total number of quantum modules while ensuring every quantum hop has a feasible Secret Key Rate (SKR).
Abstract
Hollow-Core Fiber (HCF) is emerging as a disruptive technology for next-generation optical networks, offering 30% lower propagation latency than standard Single-Mode Fiber (SMF), record-low attenuation (0.05-0.1 dB/km), and nonlinearities reduced by three to four orders of magnitude. While the physical-layer benefits of HCF have been extensively demonstrated, recent industrial commitments by hyperscalers (e.g., Microsoft, Amazon) and the rapid maturation of nested antiresonant nodeless fibers (NANF) call for a systematic assessment of the impact of HCF at the network level. Building on a series of prior contributions, we overview four emerging network-wide use cases for the selective deployment of HCF in hybrid SMF/HCF networks: (i) latency-constrained Edge Data Center (edgeDC) consolidation; (ii) energy-efficient high-power amplification; (iii) capacity scaling via single-fiber bidirectional (BiDi) transmission; and (iv) coexistence of classical and quantum (QKD) channels. Consolidated results across realistic metro, national, and continental topologies convey a unifying message: in each use case, a selective HCF upgrade captures a significant share of the achievable benefit compared to a network overhaul. The required HCF budget is use-case-specific, i.e., 6-24% of the total network fiber length for edgeDC consolidation (up to 50% fewer edgeDCs), 40% of the network links for QKD/classical coexistence (up to 38% fewer quantum modules), and 40-60% of the network links for energy-efficient capacity scaling via BiDi-HCF (up to 28% lower network power per Tbps and 70% more served traffic, at half the HCF strand count of a unidirectional HCF upgrade), whereas for energy-efficient high-power amplification the gain keeps growing with the HCF budget (up to 60% lower network power per Tbps at the national scale) and what saturates is the benefit of increasing the EDFA output power.
Related papers
- Metamaterial tactile displays with programmable virtual pixels
- Neuromorphic Decoding and Dynamical Image Reconstruction from Populations of Spiking Retinal Ganglion Cells
- Late Breaking Results: Hardware-Efficient Quantum Reservoir Computing via Quantized Readout
- Adaptive Variation-Resilient Random Number Generator for Embedded Encryption
- Sparse Walsh-Pauli Correlation Encoding for MaxCut: A Quantum-Inspired Formulation with Quantum-Hardware Validation
- Implementing Large Quantum Boltzmann Machines as Generative AI Models for Dataset Balancing