Estimating Distribution Grid Upgrade Costs based on County-level Building Electrification Projections
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: I'm Rosa.
Dev: And I'm Dev, here with Taro.
Rosa: We're looking at the paper: "Estimating Distribution Grid Upgrade Costs based on County-level Building Electrification Projections".
Dev: Here's the gist of the paper. Estimating distribution grid upgrade costs based on county-level building electrification projections presents a methodology to disaggregate bulk system projections onto representative feeders and evaluate resulting distribution upgrade costs The proposed approach combines bulk system end-use electrification projections with representative feeder sets to generate building-level electrification measures This allows to capture a diversity of feeder-level responses to electrification and represent the different realities that building electrification produces within the distribution system.
Rosa: The paper proposes a three-step methodology to estimate distribution grid capital investment costs due to building electrification 1.
Dev: For each county, we create a set of representative distribution feeders, with building loads connected to their nodes.
Paper summary: Rosa: We started with this paper, "Estimating Distribution Grid Upgrade Costs based on County-level Building Electrification Projections," to look at how we can take those big county-level building electrification projections and make them useful for the distribution system specifically.
Dev: The thesis is that existing methods struggle because they are often too broad, relying on historical utility expenditures to project future costs based only on aggregate peak demand increases <ref:2611.08347#pg2>.
Rosa: They propose a new approach: combining bulk system end-use electrification projections with representative feeder sets to generate building-level electrification measures, which allows them to capture the diversity of feeder-level responses <ref:2611.08347#pg1>.
Dev: Essentially, they create these building-level profiles by modifying the county projections and linking them to a set of representative feeders so we can evaluate how different feeder sets respond differently <ref:2611.08347#pg3>.
Rosa: This matters because those localized changes in load creation are not captured when you only look at the aggregate peak demand, and this paper gives us a way to estimate the actual distribution grid capital investment costs associated with building electrification <ref:2611.08347#pg2>.
Dev: It’s about evaluating pathways, informing policy decisions, and designing strategies to maintain affordability under these scenarios by looking at where the infrastructure investments are actually triggered <ref:2611.08347#pg2>.
Taro: From my side as an autonomy researcher testing failure modes, I'm interested in how this approach handles the scenario when the world misbehaves on a specific feeder—how gracefully does it recover?
Rosa: That’s a good question, Taro. The model is designed to capture localized changes in load that might not be directly related to changes in aggregate feeder peak demand <ref:2611.08347#pg1>. It shows that infrastructure investments can be required even when the feeder-level peak demand actually decreases <ref:2611.08347#pg3>.
Dev: And that’s where the power of this disaggregation comes in, because they are modeling those localized variations by assigning specific measures to individual buildings across a representative feeder set <ref:2611.08347#pg3>.
Taro: So it’s not just about the total load; it’s about the spatial distribution of the electrification measures, which means we see different kinds of infrastructure needs depending on where you are in that county <ref:2611.08347#pg1>.
Rosa: Exactly. It shows that some feeders experienced increases in coincident peak demand, yet they require substantially different transformer investments <ref:2611.08347#pg3>.
Conclusion: Dev: So we’ve looked at how this paper, "Estimating Distribution Grid Upgrade Costs based on County-level Building Electrification Projections," works by combining county projections with representative feeder sets to estimate distribution upgrade costs <ref:2611.08347#pg1>.
Rosa: The authors found that their optimization model successfully reproduces the projected changes in aggregate end-use electricity consumption by assigning detailed electrification measures to individual buildings across that set <ref:2611.08347#pg3>.
Lawrence Berkeley National Laboratory
eess.SY, cs.SY
Submitted: 2026-11-05
Updated: 2026-11-05
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 88/100
The gist: Estimating distribution grid upgrade costs based on county-level building electrification projections presents a methodology to disaggregate bulk system projections onto representative feeders and…
Key concepts
- Representative Feeders
- These are simplified models of actual distribution feeders used to represent typical rural and suburban systems across the U.S. They are designed with climate-specific heating and cooling patterns and voltage classes, allowing researchers to simulate how electrification impacts different types of local infrastructure.
- Disaggregating Electrification Projections
- This step translates broad, county-level electricity consumption forecasts into specific load profiles for individual buildings connected to the feeder nodes. An optimization model then selects the best combination of building electrification measures that closely matches these detailed projections.
- Feeder-Level Needs Assessment
- This involves using a power-flow algorithm on each representative feeder to determine the necessary distribution upgrades. This process calculates specific costs for line, transformer, and capacitor bank upgrades required at each feeder based on the electrification scenario.
Terminology
Summary
Estimating distribution grid upgrade costs based on county-level building electrification projections presents a methodology to disaggregate bulk system projections onto representative feeders and evaluate resulting distribution upgrade costs The proposed approach combines bulk system end-use electrification projections with representative feeder sets to generate building-level electrification measures This allows to capture a diversity of feeder-level responses to electrification and represent the different realities that building electrification produces within the distribution system. p. 0
Methodology Overview
The paper proposes a three-step methodology to estimate distribution grid capital investment costs due to building electrification 1. For each county, we create a set of representative distribution feeders, with building loads connected to their nodes. p. 2 2. Second, we disaggregate county-level high-electrification scenarios for each end-use onto the representative feeders by modifying the building load profiles and creating variations of individual building adoptions that match county-level projection. p. 2 3. Third, we assess distribution grid needs for high-electrification scenarios using feeder-level analysis and produce distribution grid infrastructure cost estimates for the whole county. p. 3
Generation of Representative Feeders
To generate county-level representative feeders, the authors rely on a methodology presented in previous work This methodology generates sets of representative feeders in the contiguous U.S., with county-level granularity, for distribution economic and policy studies. p. 3 The process involves starting from U. p. 4S. taxonomy feeders which include 24 prototypical radial distribution feeders designed to represent typical rural and suburban systems across the five climate zones defined in [27] These feeders are categorized into three voltage classes (12. p. 447 kV, 25.00 kV, 35.00 kV) and incorporate climate-driven heating and cooling demand patterns that influence feeder design. p. 4 Random variations of each prototypical feeder are generated by modifying its electrical equipment ratings so that the investments required under peak load growth match historically observed utility investment rates in each climate zone. p. 4
Disaggregating Electrification Projections
The disaggregation step involves translating aggregated annual electricity consumption projections by end-use for the residential and commercial sectors into individual building-level load profiles connected to feeder nodes The optimization model selects the combination of measures, applied to each building end-use, that minimizes the difference from the aggregated projections in the high-electrification scenario. The objective function minimizes a combination of three types of errors with relative weights given by β, and defined in constraints (2)–(4). p. 6 Constraint (4) is the most important as it captures the accuracy of the disaggregation relative to each end-use in the county-level electrification projection. p. 7
Feeder-Level Needs Assessment and Cost Calculation
The distribution upgrade assessment is performed through an iterative power-flow-based distribution planning algorithm implemented in LODGElite For each representative feeder, the analysis is conducted at the hour corresponding to the annual feeder peak demand under the electrification scenario. The resulting distribution upgrade costs are transformed into costs using equipment unit costs presented in Appendix B The total modeled county upgrade cost is calculated as C elec modeled “ÿ dPD wd ¨ C elec d (9). p. 8 The adjusted county-wide upgrade cost is then obtained by applying this value to the aggregated county-level energy projection E elec actual “ÿ euPEU ffPF mPM E elec m,f,eu (12). p. 9
Case Study Results
The case study of Genesee County demonstrates that the methodology is able to capture a diversity of feeder-level responses to electrification and represent the different realities that building electrification produces within the distribution system. p. 0 Localized changes in demand created upgrade needs that were not directly related to changes in aggregate feeder peak demand. p. 1 In some cases, infrastructure investments were required even when feeder-level peak demand decreased. p. 0 The case study also illustrates the value of representing electrification at the building level when estimating distribution infrastructure costs. p. 2
Conclusion
The paper presented a methodology to disaggregate county-level building electrification projections onto representative distribution feeders and evaluate their impact on distribution upgrade costs The results show that the optimization model can accurately reproduce the projected changes in aggregate end-use electricity consumption by assigning detailed electrification measures to individual buildings across the representative feeder set. The case study of Genesee County demonstrates that the methodology is able to capture a diversity of feeder-level responses to electrification and represent the different realities that building electrification produces within the distribution system. Some feeders experienced increases in peak demand, while others experienced reductions. p. 1 In some feeders, peak demand shifted from winter to summer, while in others the peak season remained unchanged. p. 3 These differences emerged from the composition of the building stock, the baseline technologies, and the allocation of electrification measures across the feeder set. p. 5 Some feeders experienced increases in coincident peak demand, yet they require substantially different transformer investments. p. 1 This underscores the need to capture these localized variations through modeling the spatial distribution of the electrification measures. p. 0 The total modeled distribution upgrade cost is 52. p. 823 M (2024 dollar value) based on the representative feeder set. p. 7 The adjusted county-wide upgrade cost is 50. p. 994 M. Future work can extend the methodology beyond building electrification to include other drivers of electricity demand that affect the distribution system, such as electric vehicle adoption, distributed generation, energy storage, and demand response. p. 1 The paper was funded by the U. p. 0S. Department of Energy under contract DE-AC02-05CH11231. p. 0 The views expressed herein do not necessarily represent the views of the DOE or the U. p. 1S. Government.
Appendix B Details
Table B.4 lists distribution line upgrade options used in the distribution network model, with costs corresponding to non-California installations and reported in thousands of dollars per mile. p. 8 Table B.5 presents transformer upgrade costs used in the distribution network model, showing various capacity and cost options. p. 8 Table B.6 details capacitor bank upgrade options used in the distribution network model, specifying switched costs for different capacities. p. 8 These component costs and technical characteristics were used to estimate the distribution system investments required to accommodate the projected electrification scenarios. p. 0 The tables show most values are reported in 2016 dollars and were multiplied by 1. p. 031 to approximate 2024 dollar values in the results. p. 9 The paper was published on arXiv as arXiv:2611. p. 008347v1 [eess. p. 0SY] 5 Nov 2026. p. 0 The references include sources such as U. p. 4S. Energy Information Administration, PNAS, and various utility reports. p. 1 The paper includes a detailed algorithm for distribution grid upgrade assessment in Appendix A. p. 7
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Disaggregating county-level projections to building level allows AI systems to generate localized load profiles consistent with projected end-use energy consumption while preserving
the spatial diversity of electrification demand required for distribution infrastructure analysis.
-
The optimization model described in equations (1) through (8) enables AI systems to select the
combination of measures, applied to each building end-use, that minimizes the difference from the aggregated projections in the high-electrification scenario.
-
The simulation framework allows AI systems to
assess distribution system upgrade needs and convert them into county-level distribution infrastructure costs
by iteratively running a power flow-based algorithm for each representative feeder. -
The methodology enables AI systems to
capture localized load variations and capture more realistic distribution system upgrade costs driven by electrification,
as demonstrated by how localized increases in demand trigger specific line and transformer upgrades even when overall feeder peak demand decreases.
Related papers
- Industrial Load Modeling and Optimization for Market-Based Interaction with Power Systems
- Exact and Approximate Convex Reformulation of Linear Stochastic Optimal Control with Chance Constraints
- Certified Set Convergence for Piecewise Affine Systems
- Symbolic Control for Stochastic Systems via Finite Parity Games
- Multiobjective optimization-based design and dispatch of islanded, hybrid microgrids for remote, off-grid communities in sub-Saharan Africa
- Physiology-informed layered sensing for intelligent human-exoskeleton interaction