Output-Feedback Integral Sliding-Mode Extremum Seeking with Super-Twisting Differentiation
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.
Rosa: We're looking at the paper: "Output-Feedback Integral Sliding-Mode Extremum Seeking with Super-Twisting Differentiation".
Dev: Here's the gist of the paper. This paper develops a dither-free output-feedback extremum-seeking controller for pre-stabilized nonlinear dynamic systems with unknown steady-state performance maps The proposed realization succeeds in all 200 held-out cases and attains the smallest upper-tail objective gap under the stated tuning protocol Dynamic Extremum Seeking Formulation The dynamic extremum-seeking problem involves steering a tunable parameter to a neighborhood of an unknown minimizer of an unknown steady-state input–output characteristic The objective is to steer θ to a neighborhood of the unknown minimizer θ⋆ of J, using the measured performance and the available applied parameter Assumptions define conditions on the plant dynamics and the performance map, including smooth uniformly stable equilibria and a detectable strict minimum Assumption 2 specifies that J has a unique minimizer θ⋆ in int Θ, satisfying sgn J′(θ) = sgn(θ − θ⋆) (θ, θ⋆) Integral Sliding Mode Mechanism The integral sliding mode enforces equality between the applied parameter rate and a prescribed nonzero search velocity after finite-time capture under bounded matched rate-channel perturbations The controller implements θ˙ = uθ + dθ, where uθ is the outer-loop rate command, and the commanded search velocity satisfies v(t) ∈ (−ρ, +ρ), ρ > 0 Proposition 1 shows that if kI > dθ, the reaching time TI from an arbitrary initial sliding error satisfies TI ≤ s(0) kI − dθ Super-Twisting Differentiation and Ratio A super-twisting differentiator provides finite-time estimates of signal derivatives The flow-time gradient surrogate is bg:= w/v, where w is the derivative estimate supplied to the ratio surrogate The denominator is known and nonzero because v = ρ A deadbanded hybrid relay establishes a local practical convergence radius Practical Convergence and Bounds The analysis yields a ramp-corrected moving-equilibrium coordinate that cancels the first-order ramp-induced plant term and yields explicit flow, reversal, recovery, and dynamic-remainder bounds Lemma 1 proves that for any flow interval beginning at ta, Vη(t) ≤ e−ˡh(t−ta)Vη(ta) + βηρ4 / (4), which implies a recovery time τr ≥ 1 / lħ log+ (V+η(CV − βηρ4)) Theorem 1 establishes that every initial condition generates a forward-complete hybrid Filippov trajectory, and the pair (x(t), θ(t)) remains in Z Validation and Performance The proposed controller succeeds in all 200 held-out cases on the 80-state tubular-reactor benchmark The matched-rate sweep associates No-ISM degradation with increasing applied-rate mismatch, followed by nearstall motion and direction reversal The causal ISM–STW succeeds in all 100 cases at every κ, its 90th-percentile gap remains below 3.6 × 10−4 The proposed method has the highest success rate and the smallest 90th-percentile gap among all tested methods An output-feedback ISM–STW extremum seeker was developed for stabilized nonlinear systems with unknown equilibrium maps The resulting practical parameter-error and gradient bounds separate dynamic lag, sensing, deadband, and dwell effects The causal realization succeeds in all 200 held-out cases and attains the smallest upper-tail gap The matched-rate sweep associated No-ISM degradation with increasing rate mismatch, followed by nearstall motion and direction reversal The proposed method succeeded for every tested threshold pair and initialization level References Al-Ghadiri, T.A., Al-Samarraie, S.A., Humaidi, A.J., Al Mhdawi, A.K., 2026 Aminde, N.O., Oliveira, T.R., Hsu, L., 2024 Angulo, M.T., 2015 Ariyur, K.B., Krstic, M., 2003 Dürr, H.B., Stankovic, M.S., Ebenbauer, C., Johansson, K.H., 2013 Efimov, D., Fridman, E., 2025 Filippov, A.F., 1988 Ghaffari, A., Krstic, M., Nešic, D., 2012 Hunnekens, B.G.B., Haring, M.A.M., van de Wouw, N., Nijmeijer, H., 2014 Kim, H., 2026 Krstic, M., Wang, H.H., 2000 Levant, A., 1998 Levant, A., 2003 Luo, R., Rodrigues, V.H.P., Oliveira, T.R., Krstic, M., 2026 Moreno, J.A., Osorio, M., 2012 Salsbury, T.I., House, J.M., Alcala, C.F., 2020 Scheinker, A., 2024 Scheinker, A., Krstic, M., 2014 Solís, C.U., Clempner, J.B., Poznyak, A.S., 2019 Solís, C.U., Clempner, J.B., Poznyak, A.S., 2021 Tan, Y., Nešic, D., Mareels, I., 2006 Torres-Zúñiga, I., López-Caamal, F., Hernández-Escoto, H., Alcaraz-González, V., 2021 Trollberg, O., Jacobsen, E.W., 2018 arXiv:2611.08345v1
eess.SY: 5 Nov 2026 Table 4 Method Success Median eJ Q0.9(eJ) Median eθ Median Aθ ------------------ Causal ISM–STW 200/200 1.49×10−4 3.28×10−4 0.0167 0.0108 Rate-informed STW 174/200 9.88×10−5 1.11×10−2 0.0458 2.66×10−3 P-ESC-T 196/200 9.57×10−4 2.61×10−3 0.0458 2.27×10−3 P-ESC-F 28/200 1.02×10−1 2.65×10−1 3 × 10−3 --- Disturbance ratio κ --- --- Q0.9(eJ) --- Causal ISM–STW 3 × 10−4 (at κ=1.2) No-ISM 0.400 (at κ=0.9) P-ESC-T 2.25×10−3 (at κ>1) Table 6 Condition or quantity Value / status ------ qs 9.08 × 10−5 τr / τmin 0.4861 / 0.5000 Local-consistency left / right side 5.0 × 10−8 / 2.5 × 10−6 C∆ 1.19 εtot / Rρ 0.0169 / 0.0169 Parameter-error / gradient bound 0.0219 / 0.0219 TD / TA 3.8476 / 3.8476 Table 5 Quantity Value / status ------ Rate-authority ratio at κmax = 1.3, kI/(κmaxρ) 1.48 Endpoint-LMI margin 4.34 × 10−2 Maximum recovered derivative error 1.12 × 10−3 Table 3 Method Selected values ------ Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.940735, kI = 0.02 P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −− Rate-informed STW (λc, αc, εc) = (5×10−7, 6.49×10−4, 2.66×10−3) Table 2 Method Global search box ------ Causal ISM–STW ρ ∈
0.004, 0.015: ; τmin ∈
0.7, 4.5: ; hg ∈
0.002, 0.18: P-ESC-T ω ∈
1e-2, 18: ; ap ∈
3e-3, 7e-2: ; kesc ∈
1e-2, 3: , rh ∈
1.5e−2, 0.7: ; rl ∈
0.03, 1.5: ; ϕ ∈
-π, π: Rate-informed STW λc ∈
2e-3, 6.5e-4: ; αc ∈
5×10−7, 1.5×10−3: ; εc ∈
5×10−4, 4 × 10−2: ; λ1c ∈
8e-2, 6.5e-2: ; λ2c ∈
1.2e-3, 3 × 10−1: Figure 3 Figure 3 reports the sweep Table 7 Method Selected values ------ Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94 P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −− Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4) Figure 2 Figure 2 shows the empirical CDFs of eJ in the held-out cases Table 3 (Final) Method Success Median eJ Q0.9(eJ) Median eθ Median Aθ ------------------ Causal ISM–STW 200/200 1.49×10−4 (at κ=1.2) 3.28×10−4 Table 5 (Final) Quantity Value / status ------ Rate-authority ratio at κmax = 1.3, kI/(κmaxρ) 1.48 Table 6 (Final) Condition or quantity Value / status ------ qs 9.08 × 10−5 Table 7 (Final) Method Selected values ------ Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94 P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −− Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4) Table 3 (Final) Method Selected values ------ Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94 P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −− Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4) Table 2 (Final) Method Global search box ------ Causal ISM–STW ρ ∈
0.004, 0.015: ; τmin ∈
0.7, 4.5: ; hg ∈
0.012, 18: P-ESC-T ω ∈
1e-2, 18: ; ap ∈
3e-3, 7e-2: ; kesc ∈
1e-2, 3: , rh ∈
0.015, 0.7: ; rl ∈
0.03, 1.5: ; ϕ ∈
-π, π: Rate-informed STW λc ∈
8e-2, 6.5e-2: ; αc ∈
5×10−7, 1.5×10−3: ; εc ∈
4×10−4, 4 × 10−2: ; λ1c ∈ [8e-2, 6.
Title and authors: Rosa: So we're looking at this paper called "Output-Feedback Integral Sliding-Mode Extremum Seeking with Super-Twisting Differentiation". It sounds pretty technical, right?
Dev: Yeah, it’s definitely deep into nonlinear control. The title tells you a few things immediately: they're using integral sliding mode and super-twisting differentiation to find an extremum where there isn't an explicit map for the performance.
Rosa: It’s about creating this controller that doesn't need a perfect model of the system; it uses what you measure—the performance, the parameter you apply, and what's happening inside the system—to steer that parameter toward its best possible value.
Dev: Exactly. They’re tackling those unknown steady-state performance maps that make standard extremum seeking methods struggle because they don't know exactly how the system behaves at its best point.
Rosa: It suggests a way to do this dither-free, which is a big deal because dither can introduce noise when you're trying to find the minimum.
Dev: And the authors claim this realization works in all two hundred held-out cases they tested on an eighty-state tubular reactor benchmark, and it achieves the smallest upper-tail objective gap under their tuning protocol.
The paper's summary: Rosa: They summarize by saying this controller uses only the measured performance, the applied parameter, and internal states to do its job. It enforces equality between the rate of change of that applied parameter and a specific nonzero search velocity after it captures the error in finite time under certain noise conditions.
Dev: That integral sliding mode part is key because it ensures there's a consistent search motion even when there are matched rate channel perturbations, where you can only control the parameter rate and not directly its change.
Rosa: And then they combine that with a super-twisting differentiator and some ramp-corrected moving-equilibrium coordinate to recover a gradient sign surrogate without needing any demodulation or averaging.
Dev: That’s the part that sounds really clever; using those tools allows them to get exact differentiation through the local state parameter tube, which is what they need for the super-twisting differentiator to work correctly.
Rosa: They also use a ramp-corrected moving-equilibrium coordinate that cancels out that first order ramp induced plant term, and this gives them explicit bounds on flow, reversal, recovery, and dynamic remainder terms.
Dev: The results show that for any flow interval starting at some time t a, the variable V eta is bounded by an exponential decay term plus a term proportional to the fourth power of rho divided by four.
The paper's improvements: Rosa: One of the main improvements they highlight is how they establish explicit bounds on all those things—the flow, the reversal, and recovery times—using this ramp-corrected moving-equilibrium coordinate. They don't just say it converges; they give you a concrete estimate for how long it takes to recover.
Dev: They prove using lemma one that for any flow interval starting at time t a, the variable V eta is less than or equal to an exponential decay term plus beta eta rho four over four.
Rosa: Which then implies a recovery time τ r is greater than or equal to one over l h log plus (V plus eta CV minus beta eta rho four). That gives you an explicit lower bound on the recovery time.
Dev: And they also establish theorem one which shows that every initial condition generates a forward complete hybrid Filippov trajectory, and that the pair of system state and parameter remains in the set Z.
Rosa: This is important because it means for any starting point you pick, you are guaranteed to stay within a specific set where the system stays bounded, even with all those disturbances.
Dev: They also found that the normalized ratio error separates a dynamic lag contribution from a sensing-rate contribution, and that a deadbanded relay gives an explicit local practical convergence radius.
Conclusion: Rosa: So to wrap up on this paper, they developed an output-feedback integral sliding mode extremum seeker with super-twisting differentiation for systems with unknown performance maps. They achieved success in all two hundred held-out cases on the eighty-state reactor benchmark and got the smallest upper tail gap under their tuning protocol.
Dev: The paper shows how to separate dynamic lag from sensing rate contribution using the normalized ratio error, and they also found that a deadbanded relay provides an explicit local practical convergence radius.
Rosa: They established bounds on plant transients, flow, reversal, and recovery using a ramp-corrected moving-equilibrium coordinate that separates dynamic lag from sensing rate contribution.
Dev: The causal realization succeeds in all two hundred held-out cases and attains the smallest upper tail gap among all tested methods.
Rosa: For someone just listening to the show, this means they've put together a method that is robust enough to handle these unknown steady-state maps without needing prior knowledge of how the system behaves perfectly at its optimum.
Dev: They also showed that with a matched rate sweep, you don't see any loss of gradient sign resolution when the rate mismatch increases, followed by near stall motion and direction reversal.
Rosa: It’s a solid result for anyone working on real-time control of complex nonlinear systems where you can't just rely on perfect mathematical models.
Taro: From my side, I'm just curious about how it handles the world misbehaving part. If the system reverses direction or stalls, does this controller recover gracefully, or does it just stay stuck in that bound?
Dev: That’s a fair question from Taro. The analysis shows explicit flow and reversal bounds yield a uniform recovery estimate for those difficult situations.
Rosa: So they’ve given you a way to predict the recovery time, even when things get messy in the real world, which is exactly what we need when deploying these kinds of controllers outside the lab.
Department of Mechanical Engineering, University of Maryland
eess.SY, cs.SY
Submitted: 2026-11-05
Updated: 2026-11-05
Comments: 14 pages, 3 figures, 6 tables. Submitted to Automatica. Substantially extended from a paper presented at the 23rd IFAC World Congress, 2026
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 59/100
The gist: This paper develops a dither-free output-feedback extremum-seeking controller for pre-stabilized nonlinear dynamic systems with unknown steady-state performance maps The proposed realization succeeds…
Key concepts
- Dynamic Extremum Seeking Formulation
- This is the problem of finding the optimal value of a system parameter ($ heta$) that minimizes an unknown steady-state performance function ($J$). The goal is to steer $ heta$ toward its unknown minimum ($ heta^ ext{*} $) by using measured performance data and applying control inputs.
- Integral Sliding Mode Mechanism
- This mechanism forces the rate of change of the applied parameter to equal a specific, non-zero search velocity after initial capture. This ensures a consistent search motion even when facing bounded disturbances in the system dynamics, leading to robust parameter tracking.
- Super-Twisting Differentiation
- This technique is used to estimate the time derivatives of signals (like the performance gradient) in finite time. It provides a smooth, exact derivative estimate within a defined state-parameter tube, which is crucial for accurate control and gradient calculation.
- Ramp-Corrected Moving-Equilibrium Coordinate
- This coordinate system is designed to cancel out the first-order ramp term caused by the plant dynamics. By using this coordinate, the controller can explicitly derive bounds on transient behaviors like flow, reversal, and recovery time, guaranteeing local practical convergence.
Terminology
Summary
This paper develops a dither-free output-feedback extremum-seeking controller for pre-stabilized nonlinear dynamic systems with unknown steady-state performance maps The proposed realization succeeds in all 200 held-out cases and attains the smallest upper-tail objective gap under the stated tuning protocol
Dynamic Extremum Seeking Formulation
The dynamic extremum-seeking problem involves steering a tunable parameter to a neighborhood of an unknown minimizer of an unknown steady-state input–output characteristic The objective is to steer θ to a neighborhood of the unknown minimizer θ⋆ of J, using the measured performance and the available applied parameter Assumptions define conditions on the plant dynamics and the performance map, including smooth uniformly stable equilibria and a detectable strict minimum Assumption 2 specifies that J has a unique minimizer θ⋆ in int Θ, satisfying sgn J′(θ) = sgn(θ − θ⋆) (θ, θ⋆)
Integral Sliding Mode Mechanism
The integral sliding mode enforces equality between the applied parameter rate and a prescribed nonzero search velocity after finite-time capture under bounded matched rate-channel perturbations The controller implements θ˙ = uθ + dθ, where uθ is the outer-loop rate command, and the commanded search velocity satisfies v(t) ∈ (−ρ, +ρ), ρ > 0 Proposition 1 shows that if kI > dθ, the reaching time TI from an arbitrary initial sliding error satisfies TI ≤ s(0) kI − dθ
Super-Twisting Differentiation and Ratio
A super-twisting differentiator provides finite-time estimates of signal derivatives The flow-time gradient surrogate is bg:= w/v, where w is the derivative estimate supplied to the ratio surrogate The denominator is known and nonzero because v = ρ A deadbanded hybrid relay establishes a local practical convergence radius
Practical Convergence and Bounds
The analysis yields a ramp-corrected moving-equilibrium coordinate that cancels the first-order ramp-induced plant term and yields explicit flow, reversal, recovery, and dynamic-remainder bounds Lemma 1 proves that for any flow interval beginning at ta, Vη(t) ≤ e−ˡh(t−ta)Vη(ta) + βηρ4 / (4), which implies a recovery time τr ≥ 1 / lħ log+ (V+η(CV − βηρ4)) Theorem 1 establishes that every initial condition generates a forward-complete hybrid Filippov trajectory, and the pair (x(t), θ(t)) remains in Z
Validation and Performance
The proposed controller succeeds in all 200 held-out cases on the 80-state tubular-reactor benchmark The matched-rate sweep associates No-ISM degradation with increasing applied-rate mismatch, followed by nearstall motion and direction reversal The causal ISM–STW succeeds in all 100 cases at every κ, its 90th-percentile gap remains below 3.6 × 10−4 The proposed method has the highest success rate and the smallest 90th-percentile gap among all tested methods
Conclusion
An output-feedback ISM–STW extremum seeker was developed for stabilized nonlinear systems with unknown equilibrium maps The resulting practical parameter-error and gradient bounds separate dynamic lag, sensing, deadband, and dwell effects The causal realization succeeds in all 200 held-out cases and attains the smallest upper-tail gap The matched-rate sweep associated No-ISM degradation with increasing rate mismatch, followed by nearstall motion and direction reversal The proposed method succeeded for every tested threshold pair and initialization level
References
Al-Ghadiri, T.A., Al-Samarraie, S.A., Humaidi, A.J., Al Mhdawi, A.K., 2026
Aminde, N.O., Oliveira, T.R., Hsu, L., 2024
Angulo, M.T., 2015
Ariyur, K.B., Krstic, M. p. 0 p. 0 p. 0 p. 0, 2003
Dürr, H.B., Stankovic, M.S., Ebenbauer, C., Johansson, K.H., 2013
Efimov, D., Fridman, E. p. 0, 2025
Filippov, A.F., 1988
Ghaffari, A., Krstic, M., Nešic, D., 2012
Hunnekens, B.G.B., Haring, M.A.M., van de Wouw, N., Nijmeijer, H., 2014
Kim, H., 2026
Krstic, M., Wang, H.H., 2000
Levant, A., 1998
Levant, A., 2003
Luo, R., Rodrigues, V.H.P., Oliveira, T.R., Krstic, M., 2026
Moreno, J.A., Osorio, M. p. 5, 2012
Salsbury, T.I., House, J.M., Alcala, C.F., 2020
Scheinker, A., 2024
Scheinker, A., Krstic, M., 2014
Solís, C.U., Clempner, J.B., Poznyak, A.S., 2019
Solís, C.U., Clempner, J.B., Poznyak, A.S., 2021
Tan, Y., Nešic, D., Mareels, I., 2006
Torres-Zúñiga, I., López-Caamal, F., Hernández-Escoto, H., Alcaraz-González, V., 2021
Trollberg, O., Jacobsen, E. p. 1W., 2018
arXiv:2611.08345v1 [eess. p. 0SY] 5 Nov 2026
Table 4
Method Success Median eJ Q0.9(eJ) Median eθ Median Aθ
|---|---|---|---|---|---|
Causal ISM–STW 200/200 1.49×10−4 3.28×10−4 0.0167 0.0108
Rate-informed STW 174/200 9.88×10−5 1.11×10−2 0.0458 2.66×10−3
P-ESC-T 196/200 9.57×10−4 2.61×10−3 0.0458 2.27×10−3
P-ESC-F 28/200 1.02×10−1 2.65×10−1 3 × 10−3
--- Disturbance ratio κ --- --- Q0.9(eJ) ---
Causal ISM–STW 3 × 10−4 (at κ=1.2)
No-ISM 0.400 (at κ=0.9)
P-ESC-T 2.25×10−3 (at κ>1)
Table 6
| Condition or quantity | Value / status |
|---|---|
qs 9.08 × 10−5
τr / τmin 0.4861 / 0.5000
Local-consistency left / right side 5.0 × 10−8 / 2.5 × 10−6
C∆ 1.19
εtot / Rρ 0.0169 / 0.0169
| Parameter-error / gradient bound | 0.0219 / 0.0219
| TD / TA | 3.8476 / 3.8476
Table 5
| Quantity | Value / status |
|---|---|
Rate-authority ratio at κmax = 1.3, kI/(κmaxρ) 1.48
Endpoint-LMI margin 4.34 × 10−2
Maximum recovered derivative error 1.12 × 10−3
Table 3
| Method | Selected values |
|---|---|
Causal ISM–STW ρ = 0.0107882, τmin = 0. p. 2 p. 2 p. 2 p. 2814674, hg = 0.0019813, (λ1, λ2) = (0. p. 2 p. 2 p. 2 p. 236755, 0.11173), TA = 0.940735, kI = 0.02
P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −−
Rate-informed STW (λc, αc, εc) = (5×10−7, 6.49×10−4, 2.66×10−3)
Table 2
| Method | Global search box |
|---|---|
Causal ISM–STW ρ ∈ [0.004, 0.015]; τmin ∈ [0. p. 2 p. 27, 4.5]; hg ∈ [0.002, 0.18]
P-ESC-T ω ∈ [1e-2, 18]; ap ∈ [3e-3, 7e-2]; kesc ∈ [1e-2, 3], rh ∈ [1.5e−2, 0.7]; rl ∈ [0.03, 1.5]; ϕ ∈ [-π, π]
Rate-informed STW λc ∈ [2e-3, 6.5e-4]; αc ∈ [5×10−7, 1. p. 95×10−3]; εc ∈ [5×10−4, 4 × 10−2]; λ1c ∈ [8e-2, 6. p. 95e-2]; λ2c ∈ [1. p. 92e-3, 3 × 10−1]
Figure 3
Figure 3 reports the sweep
Table 7
| Method | Selected values |
|---|---|
Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94
P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −−
Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4)
Figure 2
Figure 2 shows the empirical CDFs of eJ in the held-out cases
Table 3 (Final)
Method Success Median eJ Q0.9(eJ) Median eθ Median Aθ
|---|---|---|---|---|---|
Causal ISM–STW 200/200 1.49×10−4 (at κ=1.2) 3.28×10−4
Table 5 (Final)
| Quantity | Value / status |
|---|---|
Rate-authority ratio at κmax = 1.3, kI/(κmaxρ) 1.48
Table 6 (Final)
| Condition or quantity | Value / status |
|---|---|
qs 9.08 × 10−5
Table 7 (Final)
| Method | Selected values |
|---|---|
Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94
P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −−
Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4)
| Method | Selected values |
|---|---|
Causal ISM–STW ρ = 0.0107882, τmin = 0.814674, hg = 0.0019813, (λ1, λ2) = (0.36755, 0.11173), TA = 0.94
P-ESC-T (ω, ap, kesc) = (0.582654, 0.0316391, 2.27289), (rh,rl) = (0.0359860, 0.070139), ϕ = −−
Rate-informed STW (λc, αc, εc) = (1.865×10−4, 5.09×10−7, 6.49×10−4)
Table 2 (Final)
| Method | Global search box |
|---|---|
Causal ISM–STW ρ ∈ [0.004, 0.015]; τmin ∈ [0.7, 4.5]; hg ∈ [0.012, 18]
P-ESC-T ω ∈ [1e-2, 18]; ap ∈ [3e-3, 7e-2]; kesc ∈ [1e-2, 3], rh ∈ [0.015, 0.7]; rl ∈ [0.03, 1.5]; ϕ ∈ [-π, π]
Rate-informed STW λc ∈ [8e-2, 6.5e-2]; αc ∈ [5×10−7, 1. p. 95×10−3]; εc ∈ [4×10−4, 4 × 10−2]; λ1c ∈ [8e-2, 6. p. 9
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Prescribe nonzero parameter rate enforcement via integral sliding mode means that after capture,
the applied parameter rate equals a prescribed nonzero search velocity
which ensures a consistent search motion even under matched perturbations. -
Implement super-twisting differentiation combined with ramp-corrected moving-equilibrium coordinate to recover
a gradient-sign surrogate without demodulation or averaging,
providing exact differentiation through the local state–parameter tube. -
Establish explicit bounds on plant transients, flow, reversal, and recovery using
Lyapunov flow and reversal bounds
derived from a ramp-corrected moving-equilibrium coordinate to guarantee local practical convergence to an explicit neighborhood of the unknown optimum. -
Achieve finite-time exact output differentiation by utilizing the
super-twisting differentiator
within the state–parameter tube which provides the necessary regularity for exact differentiation, ensuring thatby(t) = y(t), w(t) = y˙(t)
after a sufficient time TD. -
Develop an AI system capable of performing dither-free extremum seeking on stabilized nonlinear dynamic systems with unknown steady-state performance maps by using only the
measured performance, the applied parameter, and internal states.
Sources
Related papers
- Industrial Load Modeling and Optimization for Market-Based Interaction with Power Systems
- Exact and Approximate Convex Reformulation of Linear Stochastic Optimal Control with Chance Constraints
- Certified Set Convergence for Piecewise Affine Systems
- Symbolic Control for Stochastic Systems via Finite Parity Games
- Multiobjective optimization-based design and dispatch of islanded, hybrid microgrids for remote, off-grid communities in sub-Saharan Africa
- Physiology-informed layered sensing for intelligent human-exoskeleton interaction