Effective Thermodynamics of a Volume-Dependent Qubit
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Effective Thermodynamics of a Volume-Dependent Qubit".
Mira: Here's the gist of the paper. Effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, ∆(V) = ∆0/V, is derived from the canonical Gibbs state to establish a complete thermodynamic structure The resulting effective Carnot cycle attains the Carnot efficiency, ηCarnot = 1 − TC/TH whereas the Otto cycle yields ηOtto = 1 − Vmin/Vmax and remains strictly sub-Carnot at finite work output Thermodynamic Framework Construction The study develops an effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, ∆(V) = ∆0/V Starting from the canonical Gibbs state, the authors derive a complete thermodynamic structure from the Helmholtz potential and its Legendre and stability properties, including the fundamental relation S(U, V), a generalized pressure conjugate to V, the equation of state U = PV, the first law, and associated Maxwell relations The effective adiabatic exponent is found to be γ = 2 for reversible adiabats satisfying TV = const.
Kai: and PV2 = const., corresponding to an effective exponent γ = 2 Response Functions and Geometry The response functions probe the system's response along the thermal direction and the Hamiltonian control direction V The heat capacity at fixed volume is found to be CV = kBx squared sech2 x The isothermal compressibility κT is controlled by the curvature of F along V, given by κT = V 2∆ϕ(x) The sign change in the generalized isothermal stiffness occurs at a crossover scale xκ ≃ 1.10886 Cycle Analysis and Irreversibility The Carnot cycle attains the Carnot efficiency, ηCarnot = 1 − TC/TH The Otto cycle is strictly sub-Carnot, with an efficiency deficit that equals the sum of two quantum relative entropies quantifying the population mismatch between the state delivered by each reversible adiabat and the Gibbs state subsequently imposed by the corresponding reservoir The total thermalization mismatch MOtto is given by x1 − x3 (r1 − r3) Unitary-Generated Nonpassivity The unitary-generated nonpassivity can act as a nonequilibrium battery, producing an apparent efficiency above Carnot when its preparation cost is omitted The auxiliary cycle closure condition ensures that the assisted and unassisted cycles reach the next thermal stroke with identical boundary state and Hamiltonian The apparent thermal efficiency exceeds the Carnot value whenever βCWmax > MOtto The work output of an Otto engine is WOtto = ∆0/2 (r1 − r3) 1/(Vmin − Vmax) This result coincides with the classical ideal-gas Otto efficiency 1 − R 1−γ, where γ = 2 originates from the Hamiltonian control law rather than from a classical heat-capacity ratio The information displaced during thermalization is not destroyed but redistributed between the reservoir and system–reservoir correlations References
1: R.
Mira: Alicki.
Kai: The quantum open system as a model of the heat engine
2: Ronnie Kosloff.
Title and authors: Kai: So, we're looking at this paper "Effective Thermodynamics of a Volume-Dependent Qubit." It deals with how to build a complete thermodynamic picture for a qubit where its energy gap changes depending on some volume-like control parameter V, which they define as delta zero over V.
Mira: Yeah, it's about taking the standard Gibbs state and deriving everything from there—the entropy, internal energy, the generalized pressure conjugate to that volume parameter V, and even the equation of state U equals P times V.
Lev: From an engineering standpoint, that means they are setting up a whole thermodynamic structure based on a potential function and its stability properties.
Kai: They found that for reversible adiabats—those where the thermal populations stay the same—the effective adiabatic exponent is two, which is really interesting because it's not what you might expect from a simple harmonic system.
Mira: That effective exponent of two comes from those reversible adiabats satisfying both T times V equals a constant and P times V squared equals a constant.
Lev: So, it’s saying that for these specific paths, the dynamics simplify in terms of the effective exponent being two, which is useful for figuring out how much work you can extract.
Kai: Then they go on to look at response functions like heat capacity and isothermal compressibility, and they found that the heat capacity at fixed volume looks like k B x squared minus sech squared x.
Mira: And the isothermal compressibility is controlled by the curvature of that potential function along the volume parameter V, specifically it equals V squared times delta phi of x.
Lev: That sign change in that generalized isothermal stiffness happens around a crossover scale where x kappa is about one point one zero eight eight six.
Kai: Moving on to cycle analysis, they show that the Carnot cycle still achieves the standard Carnot efficiency of one minus the temperature ratio times charge divided by heat capacity times temperature.
Title and authors: Mira: But they also analyze the Otto cycle and find it’s strictly sub-Carnot, with an efficiency loss that equals the sum of two quantum relative entropies, which basically measures how much information is mismatched between what the adiabatic path delivers and what the reservoir demands.
Lev: That mismatch quantity, MOtto, is calculated as x one minus x three times r one minus r three.
Kai: And they introduce this concept of unitary-generated nonpassivity, which they suggest can act like a nonequilibrium battery, potentially producing an apparent efficiency above Carnot if you ignore the cost of preparing that state.
Mira: The auxiliary cycle closure condition is key here; it ensures that both the assisted and unassisted cycles reach the next thermal stroke with identical boundary states and Hamiltonian.
Lev: That means if you're looking at real hardware, this nonpassivity could be a way to get apparent efficiency above Carnot whenever beta c w max is greater than MOtto.
Kai: So, to wrap up this paper "Effective Thermodynamics of a Volume-Dependent Qubit," they show how the Otto cycle efficiency is actually equal to one minus V min over V max, which matches the classical ideal gas Otto efficiency if you use that effective exponent of two.
Mira: But the crucial point they make is that this result comes from the Hamiltonian control law itself, not just a classical heat capacity ratio.
Lev: And they conclude that the information displaced during thermalization isn't lost; it gets redistributed between the reservoir and those system-reservoir correlations.
Kai: It sounds like this framework is really about connecting quantum information theory to how we actually design and analyze heat engines, even when the energy gap is tunable.
Mira: Exactly, it’s about showing that you can describe standard cycles using the same effective state variables as the information-theoretic structure of the system.
Lev: For real hardware, this suggests that analyzing those quantum relative entropies gives us a way to predict exactly how far we are from ideal performance when we run these engines out of a thermal bath.
Title and authors: Kai: It’s definitely a piece that connects the abstract thermodynamics with the actual control parameters like V you're setting in your lab.
Mira: And they point out that this construction is adaptable, meaning it can handle other spectral control laws where the energy gap scales as delta zero over V to some power alpha less than zero, which lets you modify those effective adiabatic exponents.
Lev: That’s important because it means we could potentially apply this kind of analysis to systems with different scaling behaviors in the Hamiltonian.
Kai: I wonder what happens when we try to extend this framework to many-body systems, incorporating correlation-dependent contributions into the generalized pressure and response functions.
Mira: That would be a big step because it would explore how those classical and quantum correlations modify the effective equation of state for something more complex than a single qubit.
Lev: If we can figure out how those correlations change things, that’s where the real overhead starts hitting when you try to map this onto actual superconducting circuits or trapped ion arrays.
Kai: So, to summarize the "Effective Thermodynamics of a Volume-Dependent Qubit," they give us a complete structure starting from the canonical Gibbs state and show that while Carnot is still the limit, we can precisely quantify the efficiency deficit in Otto cycles using quantum relative entropies.
Mira: It’s a solid framework that connects thermal cycles to information theory by showing how mismatches between transported states and reservoir states dictate performance.
Lev: And for anyone building real systems, this gives us concrete tools to calculate exactly how much work you’re missing due to the quantum friction inherent in the process.
Kai: It’s a good piece for understanding the limits of what we can extract from these tunable quantum devices.
Mira: We'll be looking at other papers soon that deal with similar control mechanisms and see if this framework holds up under different physical conditions.
Lev: We need to keep thinking about how those response functions scale when we move beyond the single qubit model to something more entangled.
The paper's summary: Kai: So, we're looking at the "Effective Thermodynamics of a Volume-Dependent Qubit" paper today to see how they built this whole thermodynamic picture from scratch using just the canonical Gibbs state.
Mira: Exactly. It starts by taking that energy gap you mentioned, delta zero over V, and deriving everything—entropy, internal energy, even that generalized pressure conjugate to the volume parameter V—without assuming those variables are already known.
Lev: From a hardware standpoint, we need to know how this translates to actual operation on superconducting circuits. Does this structure survive the noise we introduce?
Kai: The main thing they find is that for reversible paths where the temperature and volume stay constant, there's an effective adiabatic exponent of two, which is actually quite different from what you might expect in a simple system.
Mira: That exponent comes from those specific reversible paths where both T times V stays constant and P times V squared stays constant. It’s a bit counter-intuitive because it ties the dynamics directly to the control law itself.
Lev: If we're designing an engine, knowing that the scaling is tied to our Hamiltonian control law rather than just some fixed heat capacity ratio is important for setting up our error budgets.
Kai: Then they look at how fast things respond, like heat capacity and isothermal compressibility, finding a specific shape for those response functions based on the potential curve along the volume parameter V.
Mira: That means the way you compress or expand your qubit isn't just a simple geometric thing; it’s tied to this specific curvature function with that sign change happening at a crossover scale of one point one zero eight eight six.
Lev: For error correction, that crossover scale tells us exactly where the system’s response behavior fundamentally changes, which is useful for finding stable operating regions.
Kai: Moving into cycles, they confirm the Carnot efficiency still holds true for the standard cycle, but they show that any Otto cycle you run will be strictly less efficient than Carnot.
Mira: And that inefficiency isn't just some small correction; it equals the sum of two quantum relative entropies, which is essentially quantifying how mismatched the state you deliver adiabatically is compared to what the reservoir actually wants.
Lev: That mismatch term, they call MOtto, is calculated using terms like x one minus x three times r one minus r three—it’s a direct informational measure of the cycle's irreversibility.
Kai: The paper also looks at unitary-generated nonpassivity, which they suggest could act like a nonequilibrium battery if you ignore the cost of preparing that specific state.
Mira: That apparent efficiency above Carnot only works if you account for the auxiliary cycle closure condition, which makes sure both the assisted and unassisted cycles end up in the same boundary state and with the same Hamiltonian.
Lev: So, for real hardware, this means we can calculate exactly when that apparent efficiency starts exceeding Carnot based on whether beta c w max is bigger than that MOtto term.
Kai: The big implication here is they show how you can quantify the work output of an Otto engine as something like delta zero over two times the difference between r one and r three, which matches a classical ideal gas efficiency if you use that effective exponent of two.
Mira: But remember, that result comes from the Hamiltonian control law structure itself, not just assuming a classical heat capacity ratio is what dictates the scaling.
Lev: The authors flag that information displaced during this thermalization process isn't destroyed; it gets redistributed between the system and its reservoir correlations, which is a key concept for understanding dissipation in these systems.
Kai: They also noted that this framework can be adapted to other control laws where the energy gap scales as delta zero over V to some power alpha less than zero, letting you adjust those effective adiabatic exponents.
Mira: And they even suggest extending this structure to multipartite systems by adding correlation-dependent terms into the generalized pressure and response functions, exploring how classical and quantum correlations modify that equation of state.
Lev: That extension is where things get really messy for us; figuring out how those correlations change the effective equation of state when you move past a single qubit becomes a major overhead challenge.
The paper's improvements: Tom: So, we're looking at where these authors suggest they can take this thermodynamic structure for their volume-dependent qubit framework next.
Kai: They’re pushing to generalize this from a single qubit model to much larger, multipartite systems that have many interacting components.
Mira: That’s where the real theoretical meat is; they want to incorporate correlation-dependent contributions into those generalized pressure and response functions.
Lev: For real hardware, that means we have to deal with classical and quantum correlations modifying the effective equation of state, which adds a whole layer of complexity to the simulation.
Kai: They’re trying to figure out how these correlations actually change the thermodynamic behavior when you move from one qubit to a bunch of qubits all interacting.
Mira: It’s about seeing how those classical and quantum correlations fundamentally alter the scaling of the pressure and heat capacity, which is something we haven't fully mapped out before.
Lev: If that framework can actually handle those complex correlation effects, it means our error correction overhead calculations will have to account for these new interaction terms.
Kai: It’s a big step because it moves us away from the idealized single-particle picture into something closer to real condensed matter physics where things get entangled.
Mira: They are essentially trying to see if the thermodynamic structure we built for one qubit can be scaled up while still respecting all those underlying physical interactions.
Lev: That’s a lot of work because simulating those many-body correlation effects on actual hardware is going to be computationally intensive, and that’s where our current error correction methods might struggle.
Kai: So, the paper suggests this path opens up new avenues for understanding how entanglement itself influences the fundamental thermodynamic limits of quantum devices.
Conclusion: Kai: So we’re wrapping up this look at the "Effective Thermodynamics of a Volume-Dependent Qubit" paper by summarizing what we found about this framework for tunable qubits and what it means for us.
Mira: Essentially, they proved that you can build a complete thermodynamic structure starting from the canonical Gibbs state and derive all the key variables without needing to assume those things are already defined externally.
Lev: For us on the hardware side, this means we have a solid mathematical foundation to check against when we measure fidelity and thermal noise in our actual superconducting chips.
Kai: The main result is that they show how you can quantify the efficiency deficit in Otto cycles using quantum relative entropies, which gives us a precise number for how much mismatch happens between the adiabatic path and what the reservoir demands.
Mira: And they also laid out this concept of unitary-generated nonpassivity, suggesting it could act like a battery that lets us get an apparent efficiency above Carnot if we ignore the preparation cost of that state.
Lev: That’s interesting because if you can calculate when beta c w max is bigger than that mismatch term, you have a way to predict when we might actually see those efficiencies in practice.
Kai: They also confirmed that the Otto cycle efficiency equals one minus V min over V max, which matches the classical ideal gas result if you use their effective exponent of two derived from the Hamiltonian control law.
Mira: But they made it clear that this scaling comes from how the Hamiltonian is controlled, not just some standard heat capacity ratio we see in textbook examples.
Lev: And finally, they point out that information isn't lost during thermalization; it just gets redistributed between the system and the reservoir correlations.
Kai: It’s a neat piece of work because it connects the abstract thermodynamics of cycles to concrete information theory measures like relative entropy, all within this volume-dependent setting.
Mira: The limitation they state is that while they can handle standard control laws where delta zero over V scales with V to some power alpha less than zero, they haven't fully explored how those correlations affect systems with many interacting components yet.
Lev: That’s the next big hurdle for us; scaling this up to multipartite systems requires figuring out how those correlation terms actually land in the equation of state.
Kai: We definitely have a lot more ground to cover as we look at these implications for designing real, tunable quantum heat engines.
Instituto de Físia, Universidade Federal Fluminense · Departamento de Físia, Universidade Federal de Pernambuco · Departamento de Físia and Centre for Bioinformatics and Photonics--CIBioFi, Universidad del Valle
quant-ph
Submitted: 2026-11-05
Updated: 2026-11-05
Comments: 11+10 pages, 5 figures. Comments are welcome
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 79/100
The gist: Effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, ∆(V) = ∆0/V…
Key concepts
- Effective Adiabatic Exponent (\gamma)
- This exponent describes how the system's energy gap changes during a reversible adiabatic process. For this specific qubit, the effective exponent is found to be $\gamma = 2$ for reversible adiabats satisfying $TV = \text{const}$ and $PV^2 = \text{const}$. This value originates from the Hamiltonian control law rather than classical heat capacity ratios.
- Response Functions (Heat Capacity and Compressibility)
- These functions probe how the qubit responds to changes in temperature and its volume. The heat capacity at fixed volume is $C_V = kBx^2 \text{sech}^2 x$, where $x$ is a control parameter. The isothermal compressibility $\kappa_T$ is related to the curvature of the potential along the control direction $V$, specifically $\kappa_T = V^2\Delta\phi(x)$. A crossover scale exists where the sign of this stiffness changes.
- Unitary-Generated Nonpassivity
- This concept models a system that can act as a nonequilibrium battery. By analyzing the auxiliary cycle closure condition, it is shown that preparation costs can be omitted to achieve apparent thermal efficiencies exceeding the Carnot limit when $\beta C_{Wmax} > MO_{tto}$. This suggests non-equilibrium free energy storage in unitary operations.
- Thermalization Mismatch ($MO_{tto}$)
- This term quantifies the irreversibility of the Otto cycle by measuring the population mismatch between states delivered by reversible adiabats and those imposed by reservoir Gibbs states. It is given by $x_1 - x_3 (r_1 - r_3)$, representing the information displaced during thermalization that is redistributed between system-reservoir correlations.
Terminology
Summary
Effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, ∆(V) = ∆0/V, is derived from the canonical Gibbs state to establish a complete thermodynamic structure The resulting effective Carnot cycle attains the Carnot efficiency, ηCarnot = 1 − TC/TH whereas the Otto cycle yields ηOtto = 1 − Vmin/Vmax and remains strictly sub-Carnot at finite work output
Thermodynamic Framework Construction
The study develops an effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, ∆(V) = ∆0/V Starting from the canonical Gibbs state, the authors derive a complete thermodynamic structure from the Helmholtz potential and its Legendre and stability properties, including the fundamental relation S(U, V), a generalized pressure conjugate to V, the equation of state U = PV, the first law, and associated Maxwell relations The effective adiabatic exponent is found to be γ = 2 for reversible adiabats satisfying TV = const. and PV2 = const. p. 0 Reversible adiabats preserve the Gibbs populations and satisfy TV = const. and PV2 = const.Where the paper says it
Response Functions and Geometry
The response functions probe the system's response along the thermal direction and the Hamiltonian control direction V The heat capacity at fixed volume is found to be CV = kBx squared sech2 x The isothermal compressibility κT is controlled by the curvature of F along V, given by κT = V 2∆ϕ(x) The sign change in the generalized isothermal stiffness occurs at a crossover scale xκ ≃ 1.10886
Cycle Analysis and Irreversibility
The Carnot cycle attains the Carnot efficiency, ηCarnot = 1 − TC/TH The Otto cycle is strictly sub-Carnot, with an efficiency deficit that equals the sum of two quantum relative entropies quantifying the population mismatch between the state delivered by each reversible adiabat and the Gibbs state subsequently imposed by the corresponding reservoir The total thermalization mismatch MOtto is given by x1 − x3 (r1 − r3)
Unitary-Generated Nonpassivity
The unitary-generated nonpassivity can act as a nonequilibrium battery, producing an apparent efficiency above Carnot when its preparation cost is omitted The auxiliary cycle closure condition ensures that the assisted and unassisted cycles reach the next thermal stroke with identical boundary state and Hamiltonian The apparent thermal efficiency exceeds the Carnot value whenever βCWmax > MOtto
Conclusion
The work output of an Otto engine is WOtto = ∆0/2 (r1 − r3) 1/(Vmin − Vmax) This result coincides with the classical ideal-gas Otto efficiency 1 − R 1−γ, where γ = 2 originates from the Hamiltonian control law rather than from a classical heat-capacity ratio The information displaced during thermalization is not destroyed but redistributed between the reservoir and system–reservoir correlations
References
[1] R. Alicki. The quantum open system as a model of the heat engine
[2] Ronnie Kosloff. Quantum thermodynamics: A dynamical viewpoint
[3] John Goold, Marcus Huber, Arnau Riera, Lidia del Rio, and Paul Skrzypczyk. The role of quantum information in thermodynamics–a topical review
[4] Sai Vinjanampathy and Janet Anders. Quantum thermodynamics
[5] H. E. D. Scovil and E. O. Schulz-DuBois. Three-level masers as heat engines
[6] T. D. Kieu. The second law, maxwell’s demon, and work derivable from quantum heat engines
[7] H. T. Quan, Yu-xi Liu, C. P. Sun, and Franco Nori. Quantum thermodynamic cycles and quantum heat engines
[8] Raam Uzdin, Amikam Levy, and Ronnie Kosloff. Equivalence of quantum heat machines, and quantumthermodynamic signatures
[9] John P. S. Peterson, Tiago B. Batalhão, Marcela Herrera, Alexandre M. p. 0 Effective Thermodynamics of a Volume-Dependent Qubit
André T. Cesário 1, 2, ∗ and Marcela Herrera 3, †
1
Instituto de Física, Universidade Federal Fluminense, Niterói, RJ, 24210-346, Brazil
2Departamento de Física, Universidade Federal de Pernambuco, Recife, PE, 50670-901, Brazil
3Departamento de Física and Centre for Bioinformatics and Photonics—CIBioFi, Universidad del Valle, 760032 Cali, Colombia
We develop an effective thermodynamics for a qubit whose energy gap depends inversely on a
volume-like control parameter, ∆(V) = ∆0/V, where V is a spectral-control coordinate rather than a
literal mechanical volume.Where the paper says it
[10] Nathan M. Myers, Obinna Abah, and Sebastian Deffner. Quantum thermodynamic devices: From theoretical proposals to experimental reality
[11] Christiane P. Koch, Ugo Boscain, Tommaso Calarco, Gunther Dirr, Stefan Filipp, Steffen J. Glaser, Ronnie Kosloff, Simone Montangero, Thomas Schulte-Herbrüggen, Dominique Sugny, and Frank K. Wilhelm. Quantum optimal control in quantum technologies
[12] G. Oelsner, U. Hübner, and E. Il’ichev. Controlling the energy gap of a tunable two-level system by ac drive
[13] Kaue Micadei, John P. S. Peterson, Alexandre M. Souza, Roberto S. Sarthour, Ivan S. Oliveira, Gabriel T. Landi, Tiago B. Batalhão, Roberto M. Serra, and Eric Lutz. Reversing the direction of heat flow using quantum correlations
[14] Marcela Herrera, John H. Reina, Irene D’Amico, and Roberto M. Serra. Correlation-boosted quantum engine: A proof-of-principle demonstration
[15] Andrés Vallejo, Catty Lissardy, Santiago Silva-Gallo, Alejandro Romanelli, and Raúl Donangelo. Entropy-based analysis of single-qubit otto and carnot heat engines
[16] Sumiyoshi Abe. General formula for the efficiency of quantum-mechanical analog of the carnot engine
[17] X. L. Huang, D. Y. Guo, S. L. Wu, and X. X. Yi. Multilevel quantum otto heat engines with identical particles
[18] Michael J. Moran, Howard N. Shapiro, Daisie D. Boettner, and Margaret B. Bailey. Fundamentals of Engineering Thermodynamics
[19] Yunus A. Çengel and Michael A. Boles. Thermodynamics: An Engineering Approach
[20] D. Petz and G. Tóth. The bogoliubov inner product in quantum statistics
[21] D. Petz. Monotone metrics on matrix spaces
[22] Andrew Lesniewski and Mary Beth Ruskai. Monotone riemannian metrics and relative entropy on noncommutative probability spaces
[23] Lars Onsager. Reciprocal relations in irreversible processes
[24] Lars Onsager. Reciprocal relations in irreversible processes. p. 0 This observation has led to the development of quantum thermodynamics, where thermodynamic transformations are generated by changes in the
Hamiltonian, by thermalization with reservoirs, or by a
combination of both [1–4]. Quantum heat engines provide a natural framework for investigating these processes because they require a consistent separation between energy changes caused by external control and
energy changes caused by the redistribution of thermal
populations [5–8].Where the paper says it
[25] S. R. de Groot and P. Mazur. Non-Equilibrium Thermodynamics
[26] Ryoichi Kawai, Juan M. R. Parrondo, and Christian Van den Broeck. Dissipation: The phase-space perspective
[27] Massimiliano Esposito and Christian Van den Broeck. Three detailed fluctuation theorems
[28] Udo Seifert. Stochastic thermodynamics, fluctuation theorems and molecular machines
[29] Juan M. R. Parrondo, Jordan M. Horowitz, and Takahiro Sagawa. Thermodynamics of information
[30] Göran Lindblad. Completely positive maps and entropy inequalities
[31] Herbert Spohn. Entropy production for quantum dynamical semigroups
[32] Sebastian Deffner and Eric Lutz. Generalized clausius inequality for nonequilibrium quantum processes
[33] Armen E. Allahverdyan, Roger Balian, and Theo M. Nieuwenhuizen. Maximal work extraction from finite quantum systems
[34] David Reeb and Michael M. Wolf. An improved landauer principle with finite-size corrections
Appendices
Appendix A details the Gibbs state, Bloch radius, and the volume-dependent qubit Hamiltonian Appendix B constructs the Helmholtz potential, effective thermodynamic variables, and shows U = PV Appendix C derives the first law and fundamental relation S(U, V) for the volume-dependent qubit Appendix D analyzes response functions like heat capacity and isothermal compressibility Appendix E derives reversible adiabats showing PVγ = const., γ = 2 Appendix F provides the detailed Carnot-cycle calculation, yielding ηCarnot = 1 − βH/βC Appendix G details the Otto-cycle calculation, showing ηOtto = 1 − Vmin/Vmax Appendix H provides the information-theoretic interpretation of Otto irreversibility, showing MOtto = (x1 − x3)(r1 − r3) Appendix I derives the resource stored in unitary-generated nonpassivity, Wmax = ∆np squared tanh(βnp∆np 2/2)
Acknowledgments
ATC acknowledges CNPq through process No. 150643/2026-8, and also RAU No. p. 0 The same construction reproduces the reversible first law from the microscopic energy balance of
the qubit, connecting the thermodynamic and quantumarXiv:2611. 08040v1 [quant-ph] 5 Nov 2026 The same construction reproduces the reversible first law from the microscopic energy balance of
the qubit, connecting the thermodynamic and quantumarXiv:2611. 08040v1 [quant-ph] 5 Nov 2026Where the paper says it
Where the paper says it
ATC acknowledges CNPq through process No. 150643/2026-8, and also RAU No.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Effective Thermodynamic Structure Derivation: An AI system can derive a complete thermodynamic structure from a volume-dependent qubit Hamiltonian starting from the canonical Gibbs state, deriving entropy, internal energy, generalized pressure, and an equation of state without assuming these variables externally.
-
Irreversibility Quantification: The system can quantify the irreversibility of quantum engines by calculating the cycle entropy production using
the sum of the corresponding quantum relative entropies,
which precisely measuresthe informational mismatch between the adiabatically transported states and the reservoir-selected Gibbs states.
-
Nonequilibrium Battery Modeling: The AI can model a unitary-generated nonpassivity as a nonequilibrium battery, allowing it to calculate
apparent efficiency above Carnot when its preparation cost is omitted
by analyzing the relationship between stored nonequilibrium free energy and subsequent thermalization mismatch. -
Engine Efficiency Prediction: The system can predict the efficiency of both Carnot and Otto cycles based on the derived effective equation of state and response functions, showing that
the Otto cycle yields etaOtto = 1 − Vmin/Vmax
while confirming that "etaOtto < ηCarnot." -
Control Law Generalization: The framework is adaptable to other spectral control laws where the Hamiltonian scales as Delta(V) proportional to V to a power alpha less than zero, allowing for the modification of the effective adiabatic exponent and details of response functions.
-
Many-Body Extension Analysis: For multipartite systems, the AI can extend this framework by incorporating correlation-dependent contributions into generalized pressure and response functions, exploring how
classical and quantum correlations modify the effective equation of state.
Abstract
We develop an effective thermodynamics for a qubit whose energy gap depends inversely on a volume-like control parameter, Δ(V)=Δ 0/V, where V is a spectral-control coordinate rather than a literal mechanical volume. Starting from the canonical Gibbs state, we derive a complete thermodynamic structure from the Helmholtz potential and its Legendre and stability properties, including the fundamental relation S(U,V), a generalized pressure conjugate to V, the equation of state U=PV, the first law, and the associated Maxwell relations. Reversible adiabats preserve the Gibbs populations and satisfy TV= const. and PV 2= const., corresponding to an effective exponent γ=2. The resulting effective Carnot cycle attains the Carnot efficiency, η Carnot=1-T C/T H, whereas the Otto cycle yields η Otto=1-V/V and remains strictly sub-Carnot at finite work output. We identify the source of Otto irreversibility exactly: entropy is produced entirely during the isochoric thermalizations, and the cycle entropy production quantifies the informational mismatch between the adiabatically transported states and the reservoir-selected Gibbs states through the sum of the corresponding quantum relative entropies. Finally, we show that unitary-generated nonpassivity can act as a nonequilibrium battery, producing an apparent efficiency above Carnot when its preparation cost is omitted. At the same time, complete work accounting restores the thermodynamic bound.
Related papers
- Fulqrum: a generalized framework for quantum subspace diagonalization
- Flux-Activated Resonant Control of a Bosonic Quantum Memory
- Machine learning the effects of many quantum measurements
- Barriers to dequantization of near-term molecular electronic structure methods
- BRIDGE: Lazy-Move Compilation for Dual-Species Neutral-Atom Quantum Computers
- Non-Hermiticity of an anomalous superradiant phase