Joint Higher-Order Low-Rank Tensor Decompositions for Multichannel Acoustic System Compression

arXiv:2611.07975 · eess.AS · Submitted 2026-11-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Joint Higher-Order Low-Rank Tensor Decompositions for Multichannel Acoustic System Compression".

Dev: Here's the gist of the paper. Multichannel room impulse responses (RIRs) in acoustics are often long and therefore the sample count becomes large if seen as finite impulse response (FIR) filters, making storage and real-time convolution costly.

Rosa: We show that a PZ model implies a low-rank canonical polyadic decomposition (CPD) of tensorized RIRs: the early reflections form a sparse rank-1 sum, while the late reverberation admits a CPD with factors determined by the poles.

Dev: This motivates higher-order-tensor-based compression of RIRs via the block term decomposition (BTD), a generalization of the CPD.

Rosa: We propose two multichannel compression schemes: (i) a stacked multichannel block term decomposition (SMCBTD) applied to a (D+1)-mode tensor of RIRs, and (ii) a joint multichannel block term decomposition (JMCBTD) that shares subsets of factors across channels discovered by spectral clustering on factor–subspace affinity graphs.

Paper summary: Rosa: So this paper, "Joint Higher-Order Low-Rank Tensor Decompositions for Multichannel Acoustic System Compression," it tackles the problem that room impulse responses, or RIRs, are often really long. Because of that length, if you treat them like finite impulse response filters, you end up with a huge sample count. That makes storing them and doing real-time convolution really expensive for acoustics applications like this one.

Dev: Right. And the paper argues that using pole zero or PZ models is already a way to represent RIRs compactly as infinite impulse response transfer functions. The core idea they present here is that having a PZ model implies a low-rank canonical polyadic decomposition, or CPD, of these tensorized RIRs.

Taro: So they claim that for these room impulse responses, the early reflections form something sparse and rank one sum. And the late reverberation part admits its own CPD with factors determined by those poles. That’s a specific way to break down the data based on the physics of how sound bounces around in a room.

Rosa: What they do next is they use this insight to motivate higher-order tensor-based compression through something called block term decomposition, which they say is a generalization of that standard CPD idea. They then propose two specific multichannel compression schemes based on this, one stacked and one joint.

Dev: Specifically, they propose the stacked multichannel block term decomposition, or SMCBTD, which applies this to a tensor of RIRs that has D plus one modes. Then they have the joint multichannel block term decomposition, or JMCBTD.

Taro: And for the JMCBTD part, it gets interesting because it shares some of those decomposition factors across the different channels. They figure out which factors to share using a spectral clustering approach on factor subspace affinity graphs.

Rosa: So they’re not just compressing each RIR separately; they are finding shared structure across all of them simultaneously by clustering those factors together across the channels. That sounds like a smart way to handle the complexity of multiple microphones at once.

Dev: And this whole process is optimized using an alternating higher-order orthogonal iteration procedure, or HOOI. That’s their algorithm for finding those optimal factors and cores in these decompositions. It’s a sophisticated iterative method designed to find the best low-rank approximation for the tensor data they are working with.

Taro: When I think about this outside of a lab setting, I wonder how robust this whole thing is when the real world throws weird stuff at it. Does it handle things when the room doesn't behave exactly according to their model?

Rosa: That’s a good point, Taro. The paper tests both simulated rooms and measured datasets like SMARD and SRIRACHA, and they found that these proposed methods achieve consistently lower reconstruction error than using separate single-channel decompositions or even the generalized low-rank approximation of matrices called GLRAM.

Dev: The results show that the largest gains happen when you use scalar cores, which brings us back to that link between the PZ model and CPD. They also found that D equals three is a practical number, meaning it offers most of the performance gain while keeping the compute and memory cost at a moderate level.

Taro: So for someone listening who only cares about running this on their own system, what does this mean? It sounds like they’ve found a balance between getting good compression and not needing a super powerful machine to do it in real time.

Rosa: Exactly. The paper suggests that the compressed models are efficient enough for doing multichannel convolution downstream, which is what you need for actual acoustic processing tasks. They also looked at the precision of the floating-point numbers and found that these decompositions can actually be stored in sixteen-bit precision with almost no extra error when reconstructing them <ref:2611.07975#pg2>.

Dev: That’s a big piece of information for anyone thinking about deployment because it means lower memory usage without sacrificing much quality. The main thing to keep in mind, though, is that the paper flags that increasing the tensorization order D does increase both the computation time and the temporary memory requirement.

Taro: So, if you're building a real-time system, you have to weigh whether that extra compression ratio is worth the increased processing load for higher D values. It’s not just about getting lower error; it’s about fitting your hardware constraints.

Rosa: Right. And looking ahead at future work, they mentioned they could explore a single step clustering approach for the JMCBTD to avoid that two-step process they used to find the shared factors across channels. That sounds like a potential path for making the joint method even more streamlined computationally.

Dev: So, while this paper establishes this framework and shows how tensor decomposition can be applied jointly to RIRs using block term decomposition, it points toward a practical way to get better compression for multichannel acoustic systems by leveraging the structure implied by pole zero models.

Conclusion: Rosa: So, we're wrapping up on this paper about these joint higher-order low-rank tensor decompositions for multichannel acoustic system compression.

Dev: Right, so essentially they’re looking at how to take those long room impulse responses and compress them better when you have multiple microphones at once.

Rosa: Yeah, the authors are showing that by using a specific model called the PZ model, you get a low-rank decomposition of the data tensor itself. That's pretty neat because it connects physics—how sound travels—directly to how much storage you need.

Dev: It means they’re not just doing separate low-rank stuff for every single channel; they’re finding shared patterns across all of them using this block term decomposition idea.

Rosa: The main implication is that this framework, especially the joint version with spectral clustering, lets you get better compression ratios than what we could do with the standard matrix approximations we've seen before.

Dev: And what it changes for us is that these compressed models are actually efficient enough to use for multichannel convolution downstream, which is crucial for real-time processing.

Rosa: But there are still trade-offs, because they admit that increasing the complexity of the decomposition, that tensor order D, does increase both the compute time and how much memory you need.

Dev: That’s important—the method gets better in terms of reconstruction error at certain points, but you have to balance that against whether your hardware can handle the increased iteration count.

Rosa: So what this really means for the world is that we are getting a structured way to represent these acoustic signals that respects their underlying physical structure, rather than just throwing random low-rank approximations at them.

Dev: It’s showing that for a practical system, like on a phone or a sensor array, you can get good compression without needing an impossibly huge computational budget.

Matthias Blochberger, Filip Elvander, Jan Østergaard, Toon van Waterschoot

STADIUS, Department of Electrical Engineering, KU Leuven · Department of Information and Communications Engineering, Aalto University · Department of Electronic Systems, Aalborg University

eess.AS

Submitted: 2026-11-05

Updated: 2026-11-05

Comments: 15 pages, 10 figures, under peer review

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 66/100

The gist: Multichannel room impulse responses (RIRs) in acoustics are often long and therefore the sample count becomes large if seen as finite impulse response (FIR) filters…

Key concepts

Block Term Decomposition (BTD)
A general framework that unifies several standard low-rank tensor decompositions. It allows researchers to model RIRs by breaking them down into blocks, where each core can be a scalar or a matrix. This structure makes it versatile for representing different types of acoustic data.
Stacked Multichannel Block Term Decomposition (SMCBTD)
This method applies BTD to a stacked tensor of RIRs, treating the data as a $(D+1)$-mode tensor. It is one compression scheme that works by decomposing the entire set of RIRs simultaneously. It is less scalable than JMCBTD for very large channel counts.
Joint Multichannel Block Term Decomposition (JMCBTD)
This scheme finds shared decomposition factors across different channels using spectral clustering on affinity graphs. By sharing these factors, it achieves better compression ratios and lower reconstruction errors compared to single-channel methods, making it more effective for real-world multichannel acoustic systems.

Terminology

Summary

Multichannel room impulse responses (RIRs) in acoustics are often long and therefore the sample count becomes large if seen as finite impulse response (FIR) filters, making storage and real-time convolution costly. p. 0 We show that a PZ model implies a low-rank canonical polyadic decomposition (CPD) of tensorized RIRs: the early reflections form a sparse rank-1 sum, while the late reverberation admits a CPD with factors determined by the poles. p. 0 This motivates higher-order-tensor-based compression of RIRs via the block term decomposition (BTD), a generalization of the CPD. p. 0 We propose two multichannel compression schemes: (i) a stacked multichannel block term decomposition (SMCBTD) applied to a (D+1)-mode tensor of RIRs, and (ii) a joint multichannel block term decomposition (JMCBTD) that shares subsets of factors across channels discovered by spectral clustering on factor–subspace affinity graphs. p. 0 Both are optimized by an alternating higher-order orthogonal iteration (HOOI) procedure. p. 0 On simulated rooms as well as measured datasets, the proposed methods achieve consistently lower reconstruction error at equal compression ratios compared to separate single-channel decompositions and a generalized low-rank approximation of matrices (GLRAM) baseline. p. 0 The largest gains occur with scalar cores (i. p. 0e., CPD), supporting the PZ-to-CPD modelling link. p. 0 We also find D = 3 to be a practical sweet spot, offering most of the achievable gain at moderate compute/memory cost. p. 0 The compressed models enable efficient downstream multichannel convolution. p. 0

Theoretical Foundation of Tensorization and Decomposition

Tensor decompositions have been applied to RIRs in prior work: Considering matrices as 2-mode tensors, [11] uses the truncated SVD to compress multichannel RIRs arranged as a matrix. Higher-order tensor decompositions have been applied to individual RIRs in [23, 14] where they are arranged in D-mode tensors and subsequently CPD is applied, as well as [15] in which the authors use the Kronecker decomposition. p. 2 The block term decomposition (BTD) provides a convenient umbrella model for several standard low-rank tensor decompositions. p. 1 Specifically, BTD generalizes several standard tensor decompositions. p. 2 If each core is scalar, G(r) = g(r) ∈ R, then (4) reduces to the rank-R CPD. p. 2 If R = 1, then (4) reduces to the Tucker decomposition. p. 2 The factors and cores in (4) can be computed using standard alternating HOOI-type algorithms for BTD. p. 2

Joint Compression Frameworks

The paper introduces two joint compression methods: the stacked multichannel block term decomposition (SMCBTD) and the joint multichannel block term decomposition (JMCBTD). SMCBTD applies BTD to a stacked tensor of RIRs, T ∈ R I1×I2×···×ID×M, which is a (D+1)-mode tensor. p. 6 JMCBTD formulates the problem as a joint multichannel tensor decomposition problem where subsets of decomposition factors are shared across RIRs. p. 1 The set of shared factors across subsets of channels is determined by a spectral clustering approach. p. 1 The optimization algorithm for BTD is based on alternating higher-order orthogonal iterations (HOOIs). p. 1

Data-Driven Factor Sharing Mechanism

To determine the optimal sharing clusters C(r,d)c, a two-step approach using spectral clustering is employed. The factor subspace affinity graph for a (r, d) is defined as G(r,d) ≜ V(r,d), E(r,d), w(r,d). p. 5 The weight function w(r,d)(i, j) is defined as an affinity value based on the subspace distance by w(r,d)(i, j) = exp − dS(U(r,d) i, U(r,d) j)σ squared. p. 5 Spectral clustering is then applied to the graphs G(r,d) to obtain the clusters C(r,d)c. p. 6 The compression ratio for JMCBTD is defined as CJMCBTD = 1 − Ncores + P(r,d)∈I N(r,d)shr + N(r,d)ind ML. p. 6

Performance Evaluation and Results

Numerical experiments using simulated and measured RIRs show improved performance of the proposed methods over the baseline method. For simulated data, JMCBTD achieved faster computation times than SMCBTD, and at larger M and L the latter became infeasible due to memory constraints. p. 7 In measured datasets like SMARD and SRIRACHA, the proposed JMCBTD method outperforms the GLRAM-based method across all tensorization orders D. p. 9 The performance gain is more pronounced for lower core ranks, especially Kd = 1. p. 8

Conclusion and Practical Implications

The floating-point precision experiment suggests that the proposed decompositions can be stored in 16-bit precision with negligible additional reconstruction error. The numerical results underline the theoretical correspondence between PZ model and low-rank tensor representations, and point to the CPD as the most efficient representation in terms of reconstruction error. p. 3 The difference between JMCBTD and SMCBTD is that the former requires smaller intermediate residuals due to the smaller working sets in each block update. p. 9 This makes the JMCBTD method more scalable for higher channel counts M, RIR lengths L, and number of blocks R. p. 4 The fact of increasing computation time and temporary memory requirement with increasing tensorization order D, combined with the marginal performance gain in terms of reconstruction error observed in the experiments, suggests that D = 3 is a good choice in practice. Future extensions include a single step clustering approach for the JMCBTD avoiding the two-step approach. p. 5 The paper concludes that BTD is a valuable representation because it allows for efficient downstream applications such as convolution with anechoic signals. p. 1

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved RIR Compression via Joint Multichannel Block Term Decomposition (JMCBTD)

The JMCBTD method allows for shared factors across RIRs by employing spectral clustering on factor-subspace affinity graphs, which infer shared factors from factor-subspace affinity graphs rather than imposing a fixed sharing pattern a priori. This results in a compression ratio calculated as CJMCBTD = 1 - Ncores + P(r,d)∈I N(r,d)shr + N(r,d)ind ML.

  1. Enhanced Spatial Performance in Far-Field Scenarios

The JMCBTD method demonstrates significantly lower reconstruction error across the array at the far-field position compared to baseline methods like GLRAM and SMCBTD, particularly when using a tensorization order D=4 or 5.

  1. Tail Reconstruction Preservation

By evaluating the tail using a logenvelope error measure (TEE), the method quantifies how well the local decay profile of the late reverberant tail is preserved, offering better representation of diffuse late reverberation than sample-wise misalignment.

Related papers