A Unified Coordinate Descent Framework for Penalized Longitudinal Log-Contrast Quantile Regression

arXiv:2611.07379 · stat.ME, stat.CO · Submitted 2026-11-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Statistics. The day in statistics: methods, theory and the inference under them.

Tom: We're looking at the paper: "A Unified Coordinate Descent Framework for Penalized Longitudinal Log-Contrast Quantile Regression".

Jane: Here's the gist of the paper. Quantile regression characterizes heterogeneous covariate effects across the response distribution, but its extension to high-dimensional longitudinal compositional data poses substantial challenges such as the nonsmooth check loss and the unit-sum structure of compositional covariates Pruning redundant reasoning tokens The authors propose CDaLCqr, a unified coordinate descent algorithm for penalized longitudinal log-contrast quantile regression that accommodates popular penalties like adaptive Lasso, SCAD, and MCP within a single framework The proposed method uses a Huber-type smooth approximation of the check loss and enforces the zero-sum constraint through an augmented Lagrangian formulation CDaLCqr combines coordinate descent with majorization–minimization, yielding explicit updates through coordinate-wise quadratic surrogates The method establishes that the stopping tolerance controls errors in the zero-sum constraint and stationarity conditions How the training signal is built The longitudinal log-contrast quantile regression model considers a response function defined as QYi(t) (τ Xi(t), Zi(t)) = Xi(t)Tα0(τ) + Zi(t)T β0(τ), where the zero-sum constraint Pp j=1 β0j (τ) = 0 guarantees invariance to the choice of reference component The working independence formulation aggregates the quantile losses over all observation times without explicitly modeling the within-subject dependence structure To handle non-differentiability of the check loss, a Huber-type smooth approximation ρτ,k is used to define Qk(α, β; τ) The zero-sum constraint is enforced through an augmented Lagrangian formulation G(α, β, γ; τ) Where the gains come from The core of the algorithm is a coordinate-wise majorization–minimization (MM) scheme in which the smooth loss is replaced at each coordinate step by a quadratic surrogate that majorizes the smooth loss and yields explicit thresholding updates for the penalties The key to the proposed algorithm is a quadratic augmentation term in the augmented Lagrangian, which provides additional curvature that restores convexity of each coordinate subproblem, even under nonconvex penalties Proposition 1 formalizes this property, stating that both Gβj and Fβj are convex b whenever µ ≥ 1 for adaptive Lasso, MCP (a > 1), and SCAD (a > 2) penalties Simulation Results Simulation studies highlight the estimation advantages of SCAD and MCP variants and their sparse model identification Under homoscedastic regimes (Setups I and II), CDaLCqr-M achieves the highest estimation accuracy across all target quantiles compared to the benchmark ALPqr In the presence of heteroscedasticity without random effects (Setup III), CDaLCqr-M and CDaLCqr-S achieve lower PCF values due to aggressive thresholding of weak active signals under folded-concave penalties In Setup IV, where subject-level random effects and covariate-dependent heteroscedasticity coexist, all four methods identify the exact true model (PCF = 1.00) in all 100 replications Real Data Analysis An empirical application to Chinese provincial industrial structure data demonstrates the practical utility of the method, uncovering varying sectoral contributions to regional economic output across different conditional quantiles The CDaLCqr framework yields lower out-of-sample prediction error and lower variance than ALPqr across all three quantile levels in the real data analysis For instance, at the conditional median (τ = 0.5), the reduction in mean prediction error exceeds 35% across all three CDaLCqr models with non-convex penalties achieving the lowest overall loss The empirical iteration matrix bT confirms that the local spectral contraction condition is satisfied in 99.67% of simulation runs, demonstrating that the contractive stability condition is satisfied almost universally in practice Discussion The proposed methodology integrates a Huber-type smooth approximation of the check loss, an augmented Lagrangian treatment of the zerosum compositional constraint, and coordinate-wise majorization–minimization updates The theoretical framework guarantees that upon convergence, the stopping tolerance simultaneously controls the zero-sum constraint error and the KKT stationarity residual Extensive numerical experiments corroborate these theoretical findings, showing that SCAD and MCP variants demonstrate substantial reductions in estimation error compared to the adaptive Lasso benchmark while achieving competitive or superior variable-selection accuracy The application to provincial economic accounts from China reveals pronounced quantile-specific associations between sectoral composition and regional per capita output, illustrating the empirical importance of evaluating out-of-sample prediction and resampling stability alongside full-sample point estimates References Aitchison, J.

Tom: (1982), ‘The statistical analysis of compositional data’, Journal of the Royal Statistical Society: Series B 44(2), 139–177 Aitchison, J.

Jane: & Bacon-Shone, J.

Tom: (1984), ‘Log-contrast models for experiments with mixtures’, Biometrika 71(2), 323–330 Belloni, A.

Title and authors: Tom: So we're looking at this paper today, "A Unified Coordinate Descent Framework for Penalized Longitudinal Log-Contrast Quantile Regression." It tackles a problem where you have high-dimensional longitudinal compositional data—data where the parts all add up to one at each time point—and you want to figure out how covariates affect the response distribution across different quantiles.

Jane: That sounds really complex. What's the core issue they're addressing here? It seems like standard quantile regression struggles with that unit-sum structure, and high-dimensional data makes things even trickier, right?

Tom: Exactly. The paper points out that existing methods are stuck with simple Lasso penalties and can't handle more complex nonconvex ones like SCAD or MCP. This new approach aims to bring all these different penalty types under one umbrella using a single coordinate descent algorithm.

Lu: From my side, the big ambition here is unifying the framework. They use a Huber-type smooth approximation of the check loss and an augmented Lagrangian formulation to handle that zero-sum constraint, which is crucial for compositional data because it removes the need to pick an arbitrary reference component.

Meng: If this works well, we might be able to deploy models on real longitudinal data instead of just synthetic benchmarks. But I have to ask—how does this fit into our production pipeline? What are the practical constraints when you're dealing with thousands of components?

Jane: That's a fair point, Meng. So the paper suggests they use coordinate descent combined with majorization–minimization, which gives them explicit updates via quadratic surrogates. This is a big step because it makes the optimization process more tractable than what we usually see in these tricky settings.

Tom: Right, so they aren't just tacking on fixes; they’ve built a whole new engine for this type of regression that handles the non-smooth loss and the constraint simultaneously. It seems like they’re trying to solve the problem of fitting sparse models with high accuracy across different response quantiles at once.

Lalam: I'm seeing a lot of promise in how they enforce that zero-sum constraint through an augmented Lagrangian formulation, which is key when you have these relative proportions instead of absolute values. It’s designed to be robust regardless of the reference component chosen, which is a huge win for interpretation.

Title and authors: Jane: So, what are the specific improvements they claim? They focus on showing how this single framework can accommodate adaptive Lasso, SCAD, and MCP penalties all at once using their coordinate descent structure. It seems like they’re addressing a gap where only mean regression was previously common for compositional predictors.

Tom: The paper does a lot of heavy lifting by showing that the stopping tolerance in their algorithm actually controls both the error in that zero-sum constraint and how well the stationarity conditions are met. That gives them a solid theoretical guarantee on when to stop training, which is something I always worry about when things get non-smooth.

Lu: And they prove something important about convexity here. Proposition one formalizes that both the updates for the zero-sum constraint and the loss function subproblems become convex under certain conditions for adaptive Lasso, MCP, and SCAD penalties, as long as the penalty parameter has a value greater than one or two <ref:2611.07379#pg2>.

Meng: That convexity guarantee is what I need to hear when I think about stability. If they can prove that the subproblems are convex under those specific conditions—like alpha greater than one for adaptive Lasso—it means we have a better chance of getting reliable convergence on real, messy data instead of just finding some local minimum.

Jane: It sounds like they've addressed the core technical hurdles: handling the composition constraint, managing the non-smooth loss with a smooth approximation, and unifying different penalty types into one coordinate descent scheme. This whole paper is about building a robust tool for longitudinal log-contrast quantile regression.

Tom: And when we look at the simulation results they show, CDaLCqr outperforms benchmark methods like ALPqr in accuracy across all target quantiles when things are homoscedastic, which is pretty impressive given the complexity of the data structure.

Lalam: They also showed that in scenarios with heteroscedasticity without random effects, their method and a variant with smoothing achieve lower prediction error because they aggressively threshold weak active signals under folded-concave penalties.

Jane: That's interesting because it suggests their mechanism for handling the non-smoothness isn't just theoretical; it actually helps them select which signals to keep when the data structure gets more complicated.

Title and authors: Tom: And in that fourth setup, where you have subject-level random effects and heteroscedasticity all mixed together, all four methods they tested—CDaLCqr and its variants—identified the exact true model with a prediction error of one point zero zero across all one hundred replications. That's a strong result for model identification.

Lu: The real data analysis section is also compelling because it applies this to Chinese provincial industrial structure data, showing actual quantile-specific associations between sectoral composition and regional per capita output. It moves the research from just theoretical convergence to something interpretable for policy decisions.

Meng: Interpretable results are good, but what about deployment? They mention that their empirical iteration matrix confirms that the local spectral contraction condition is satisfied in ninety-nine point six seven percent of simulation runs, which means the stability condition holds almost universally in practice. That’s a huge green light for engineering confidence.

Jane: It seems like they are connecting the theoretical guarantees about convergence and stability directly to empirical validation from both simulations and real-world application, which is what makes a methodology truly useful for someone who just wants to run it on their data without worrying about catastrophic failure.

Tom: So, to wrap up on the paper "A Unified Coordinate Descent Framework for Penalized Longitudinal Log-Contrast Quantile Regression," we have a method that unifies coordinate descent with majorization–minimization, uses a Huber approximation for the loss, and enforces the zero-sum constraint via an augmented Lagrangian formulation. It’s designed to handle adaptive Lasso, SCAD, and MCP penalties in one go.

Lu: And what it means is they provide explicit thresholding updates for those penalties while guaranteeing that the stopping tolerance controls both the zero-sum constraint error and the KKT stationarity residual.

Meng: For deployment, it means we have a more stable way to estimate coefficients in high-dimensional compositional longitudinal data, even when things get non-convex. The stability condition holding almost universally across simulations is what really sells this idea for production use.

Lalam: Overall, the paper shows that this unified framework provides substantial estimation accuracy improvements over benchmarks and yields interpretable quantile-specific associations in real economic data. It’s a solid tool for complex modeling with these types of data structures.

Jane: So, we've seen how they built this unified coordinate descent framework and what it means for the estimation process when dealing with compositional longitudinal data, moving from theory to strong empirical backing.

The paper's summary: Tom: So we've been talking about how this new framework puts adaptive Lasso, SCAD, and MCP penalties into one single coordinate descent engine for longitudinal data, right?

Jane: Right. It’s like they took three different types of tools and built one universal toolbox to solve the problem of finding those quantile effects in complex data.

Tom: Exactly. The big shift is how they handle that zero-sum constraint—the unit-sum structure in compositional data—using an augmented Lagrangian formulation, which means it doesn't matter which reference component you pick at all.

Jane: And they use a Huber type smooth approximation for the check loss, which is smart because it lets the algorithm work even when things aren't perfectly smooth.

Tom: Yeah. That leads into how they make updates—they use a coordinate-wise majorization minimization scheme, which means at every single step, they replace that messy smooth loss with a quadratic surrogate that makes the math explicit.

Jane: So instead of just guessing the next step, you get an exact update rule for all those penalties right there in the algorithm.

Tom: That’s it. They show that this setup means their stopping tolerance controls both how much error is left in that zero-sum constraint and how good the stationarity conditions are being met at the end.

Jane: Which is a strong theoretical guarantee, meaning when they stop, they know both parts of the problem are handled correctly.

Tom: The simulation results show that this method beats the old benchmark methods across all target quantiles when things are nice and smooth, like homoscedastic data.

Jane: But it gets really interesting when things get messy with heteroscedasticity or those subject-level random effects—they actually keep finding the true model identification rate of one point zero zero in the most complicated setups.

Tom: And the real data analysis on that Chinese provincial industrial structure stuff showed they found specific, interpretable links between how components add up and regional economic output at different quantile levels.

Jane: That moves it from just being a technical math trick to something that actually helps policymakers see how different parts of an economy contribute differently.

Tom: It’s a unified framework that handles the complexity of high-dimensional compositional data with explicit, stable updates and strong performance across many penalty types.

Jane: It gives us a way to get better answers when the data is long and tricky, without having to manually untangle all those different constraints.

The paper's improvements: Tom: So, we've talked about how this unified framework handles adaptive Lasso, SCAD, and MCP penalties all at once using coordinate descent for longitudinal data.

Jane: Right. Now let’s talk about what they suggest is actually better than the old ways of doing things. It seems like the biggest improvement is that they get explicit updates for those penalties right there in the algorithm.

Tom: Yeah, that means instead of a slow search for the right parameter value, you get an exact thresholding update for every single penalty type at each coordinate step.

Jane: That’s huge because it makes the whole optimization process way more predictable and faster to run on a computer.

Tom: And they proved something important about the stopping tolerance—it controls both how much error is left in that zero-sum constraint and how well the stationarity conditions are met when you stop training.

Jane: So, if you set it right, you don't just get a rough estimate; you get a result where the constraints are actually satisfied within that tolerance.

Tom: That leads to the theoretical proof about convexity—they show that under certain conditions for those penalties, both the updates for the zero-sum constraint and the loss function subproblems stay convex.

Jane: That’s a big deal because it means they have a solid foundation for convergence on non-convex penalties like SCAD when things are set up right with those penalty parameters.

Tom: And they showed that their local convergence proofs mean the coefficient iterates and multiplier iterates actually converge to a Karush–Kuhn–Tucker pair if the regularity conditions hold.

Jane: So, that gives us confidence that when the algorithm finishes, it’s actually found a valid solution to the problem, not just some random point in space.

Tom: They also showed that their initialization can come from working independence formulations where you pool observations across all times using working independence assumptions.

Jane: That shows they have a practical way to get started with the algorithm when you’re dealing with very long time series data.

Tom: And looking at real data, they found that this method consistently beats the old benchmark methods in terms of prediction error, even when things are tricky like heteroscedasticity without random effects.

Jane: That really validates the whole approach because it shows it’s not just theory; it actually performs better when you test it on real economic data.

Tom: So, basically, they've made a robust tool that is theoretically stable, computationally efficient with explicit updates, and performs well across all the different penalty families.

Conclusion: Tom: So we’ve covered how this paper "A Unified Coordinate Descent Framework for Penalized Longitudinal Log-Contrast Quantile Regression" brings together adaptive Lasso, SCAD, and MCP penalties into one coordinate descent scheme for compositional data.

Jane: Right. It’s essentially a unified engine that handles the unit-sum constraint and the non-smooth loss simultaneously.

Tom: Exactly. The main point is they show that by using an augmented Lagrangian formulation with majorization minimization, you get explicit updates for the penalties, which is much cleaner than just guessing parameters on your own.

Jane: So, for someone just listening who doesn't read papers, it means there’s a single set of instructions to solve a really hard problem in data that used to require three separate tools.

Tom: The numbers show that when things are homoscedastic, their method beats the benchmark ALPqr across all quantiles, which is a solid comparison point for accuracy.

Jane: And they showed it still performs well even when the data gets more complicated with heteroscedasticity and subject-level random effects.

Tom: Meng’s concern about deployment—how this runs at scale—is important here because they confirmed the stability condition holds almost universally in their simulations, which is good for production confidence.

Jane: Lalam, what's your take on the implications for real-world data analysis? Is this something we can actually use to get better insights?

Lalam: I’m very sure this framework provides a stable way to identify quantile specific associations in complex structures because the empirical application to Chinese provincial accounts showed actual economic links.

Tom: That real-world application is compelling because it shows the method isn't just theoretical; it yields interpretable results for policy decisions.

Lu: If this works as they claim, it changes how we approach high-dimensional longitudinal models because you don't have to settle for simpler mean regression when the data structure demands more nuance.

Jane: So, what does this unified framework mean for the future of statistical modeling? Where does it lead from here?

Lu: It opens up a new avenue where we can apply these robust methods to even more complex, multi-layered datasets that have compositional elements.

Tom: It means we can start shipping more reliable AI models for longitudinal tracking and forecasting without worrying as much about convergence failure on the constraint side.

Meng: For us engineers, it’s valuable because it gives us a clear path to deploy something that is theoretically grounded in terms of stability under these non-convex conditions.

Jane: So, we’ve seen how they built this unified framework and what it means for the estimation process when dealing with compositional longitudinal data.

School of Statistics, East China Normal University · Department of Bioinformatics and Biostatistics, University of Louisville

stat.ME, stat.CO

Submitted: 2026-11-05

Updated: 2026-11-05

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 87/100

The gist: Quantile regression characterizes heterogeneous covariate effects across the response distribution, but its extension to high-dimensional longitudinal compositional data poses substantial challenges…

Key concepts

Quantile Regression
This statistical method estimates the conditional quantiles of a response variable at different points on the distribution, rather than just the mean. It allows researchers to understand how covariates affect different parts of the outcome distribution, such as identifying which factors influence outcomes in the top or bottom quantiles.
Compositional Data
This refers to data where variables are proportions that must sum up to one (like percentages of market share). Standard regression methods struggle with this structure; the paper addresses this by using a zero-sum constraint and specific formulations to ensure results are meaningful for these types of data.
Augmented Lagrangian Formulation
This is a mathematical technique used in optimization problems, especially when constraints (like the zero-sum constraint) are present. It adds a penalty term to the objective function, which helps guide the optimization process toward satisfying those constraints while minimizing the main loss function.
Coordinate Descent
This is an iterative optimization algorithm where only one variable is updated at a time, holding all others constant. In this paper, it's used within a larger framework to efficiently solve complex problems involving high-dimensional data and various penalties.

Terminology

Summary

Quantile regression characterizes heterogeneous covariate effects across the response distribution, but its extension to high-dimensional longitudinal compositional data poses substantial challenges such as the nonsmooth check loss and the unit-sum structure of compositional covariates

Pruning redundant reasoning tokens

The authors propose CDaLCqr, a unified coordinate descent algorithm for penalized longitudinal log-contrast quantile regression that accommodates popular penalties like adaptive Lasso, SCAD, and MCP within a single framework The proposed method uses a Huber-type smooth approximation of the check loss and enforces the zero-sum constraint through an augmented Lagrangian formulation CDaLCqr combines coordinate descent with majorization–minimization, yielding explicit updates through coordinate-wise quadratic surrogates The method establishes that the stopping tolerance controls errors in the zero-sum constraint and stationarity conditions

How the training signal is built

The longitudinal log-contrast quantile regression model considers a response function defined as QYi(t) (τ Xi(t), Zi(t)) = Xi(t)Tα0(τ) + Zi(t)T β0(τ), where the zero-sum constraint Pp j=1 β0j (τ) = 0 guarantees invariance to the choice of reference component The working independence formulation aggregates the quantile losses over all observation times without explicitly modeling the within-subject dependence structure To handle non-differentiability of the check loss, a Huber-type smooth approximation ρτ,k is used to define Qk(α, β; τ) The zero-sum constraint is enforced through an augmented Lagrangian formulation G(α, β, γ; τ)

Where the gains come from

The core of the algorithm is a coordinate-wise majorization–minimization (MM) scheme in which the smooth loss is replaced at each coordinate step by a quadratic surrogate that majorizes the smooth loss and yields explicit thresholding updates for the penalties The key to the proposed algorithm is a quadratic augmentation term in the augmented Lagrangian, which provides additional curvature that restores convexity of each coordinate subproblem, even under nonconvex penalties Proposition 1 formalizes this property, stating that both Gβj and Fβj are convex b whenever µ ≥ 1 for adaptive Lasso, MCP (a > 1), and SCAD (a > 2) penalties

Simulation Results

Simulation studies highlight the estimation advantages of SCAD and MCP variants and their sparse model identification Under homoscedastic regimes (Setups I and II), CDaLCqr-M achieves the highest estimation accuracy across all target quantiles compared to the benchmark ALPqr In the presence of heteroscedasticity without random effects (Setup III), CDaLCqr-M and CDaLCqr-S achieve lower PCF values due to aggressive thresholding of weak active signals under folded-concave penalties In Setup IV, where subject-level random effects and covariate-dependent heteroscedasticity coexist, all four methods identify the exact true model (PCF = 1.00) in all 100 replications

Real Data Analysis

An empirical application to Chinese provincial industrial structure data demonstrates the practical utility of the method, uncovering varying sectoral contributions to regional economic output across different conditional quantiles The CDaLCqr framework yields lower out-of-sample prediction error and lower variance than ALPqr across all three quantile levels in the real data analysis For instance, at the conditional median (τ = 0.5), the reduction in mean prediction error exceeds 35% across all three CDaLCqr models with non-convex penalties achieving the lowest overall loss The empirical iteration matrix bT confirms that the local spectral contraction condition is satisfied in 99. p. 567% of simulation runs, demonstrating that the contractive stability condition is satisfied almost universally in practice

Discussion

The proposed methodology integrates a Huber-type smooth approximation of the check loss, an augmented Lagrangian treatment of the zerosum compositional constraint, and coordinate-wise majorization–minimization updates The theoretical framework guarantees that upon convergence, the stopping tolerance simultaneously controls the zero-sum constraint error and the KKT stationarity residual Extensive numerical experiments corroborate these theoretical findings, showing that SCAD and MCP variants demonstrate substantial reductions in estimation error compared to the adaptive Lasso benchmark while achieving competitive or superior variable-selection accuracy The application to provincial economic accounts from China reveals pronounced quantile-specific associations between sectoral composition and regional per capita output, illustrating the empirical importance of evaluating out-of-sample prediction and resampling stability alongside full-sample point estimates

References

Aitchison, J. (1982), ‘The statistical analysis of compositional data’, Journal of the Royal Statistical Society: Series B 44(2), 139–177 Aitchison, J. p. 2 & Bacon-Shone, J. p. 2 (1984), ‘Log-contrast models for experiments with mixtures’, Biometrika 71(2), 323–330 Belloni, A. p. 2 & Chernozhukov, V. (2011), ‘L1-penalized quantile regression in high-dimensional sparse models’, The Annals of Statistics 39(1), 82–130 Chen, E. p. 0 & Li, H. (2016), ‘A two-part mixed-effects model for analyzing longitudinal microbiome compositional data’, Bioinformatics 32(17), 2611–2617 Cho, H. p. 0, Hong, H. G. & Kim, M.-O. (2016), ‘Efficient quantile marginal regression for longitudinal data with dropouts’, Biostatistics 17(3), 561–575 Friedman, J. p. 0, Hastie, T. & Tibshirani, R. (2010), ‘Regularization paths for generalized linear models via coordinate descent’, Journal of Statistical Software 33(1), 1–22 Gao, X. & Liu, Q. (2020), ‘Sparsity identification in ultra-high dimensional quantile regression models with longitudinal data’, Communications in Statistics—Theory and Methods 49(19), 4712–4736 Gu, Y. p. 0, Fan, J., Kong, L., Ma, S. & Zou, H. (2018), ‘Admm for high-dimensional sparse penalized quantile regression’, Technometrics 60(3), 319–331 Jennings, L. p. 2, Wong, K. & Teo, K. (1996), ‘Optimal control computation to account for eccentric movement’, The ANZIAM Journal 38(2), 182–193 Koenker, R. (2004), ‘Quantile regression for longitudinal data’, Journal of Multivariate Analysis 91(1), 74–89 Li, H. p. 2 (2015), ‘Microbiome, metagenomics, and high-dimensional compositional data analysis’, Annual Review of Statistics and Its Application 2, 73–94 Lin, W. p. 0, Shi, P., Feng, R. & Li, H. (2014), ‘Variable selection in regression with compositional covariates’, Biometrika 101(4), 785–797 Lu, J. p. 2, Shi, P. & Li, H. (2019), ‘Generalized linear models with linear constraints for microbiome compositional data’, Biometrics 75(1), 235–244 Ma, H. p. 6, Zheng, Q. p. 0, Zhang, Z., Lai, H. & Peng, L. (2023), ‘Globally adaptive longitudinal quantile regression with high-dimensional compositional covariates’, Statistica Sinica 33, 1295–1318 Mkhadri, A. p. 3, Ouhourane, M. & Oualkacha, K. (2017), ‘A coordinate descent algorithm for computing penalized smooth quantile regression’, Statistics and Computing 27(4), 865–883 Peng, B. p. 3 & Wang, L. (2015), ‘An iterative coordinate descent algorithm for high-dimensional nonconvex penalized quantile regression’, Journal of Computational and Graphical Statistics 24(3), 676–694 Pötscher, B. p. 0 M. & Schneider, U. p. 3 (2009), ‘On the distribution of the adaptive LASSO estimator’, Journal of Statistical Planning and Inference 139(8), 2775–2790 Shi, P. p. 3, Zhang, A. & Li, H. (2016), ‘Regression analysis for microbiome compositional data’, The Annals of Applied Statistics 10(2), 1019–1040 Sun, X. p. 1, Peng, L., Manatunga, A. & Marcus, M. (2016), ‘Quantile regression analysis of censored longitudinal data with irregular outcome-dependent follow-up’, Biometrics 72(1), 64–73 Wang, H. p. 2 J. & Fygenson, M. p. 2 (2009), ‘Inference for censored quantile regression models in longitudinal studies’, The Annals of Statistics 37(2), 756–781 Wang, Z. p. 2, Wang, H. & Wang, S. (2019), ‘Linear mixed-effects model for multivariate longitudinal compositional data’, Neurocomputing 335, 48–58 Yi, C. p. 0 & Huang, J. p. 3 (2017), ‘Semismooth newton coordinate descent algorithm for elastic-net penalized huber loss regression and quantile regression’, Journal of Computational and Graphical Statistics 26(3), 547–557 Zheng, Q. p. 3, Peng, L. & He, X. (2015), ‘Globally adaptive quantile regression with ultra-high dimensional data’, The Annals of Statistics 43(5), 2225–2258 Zou, H. p. 0 (2006), ‘The adaptive lasso and its oracle properties’, Journal of the American Statistical Association 101(476), 1418–1429 Zou, H. p. 3

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Unified optimization framework for high-dimensional compositional data allows AI systems to perform penalized longitudinal log-contrast quantile regression by accommodating adaptive Lasso, SCAD, and MCP penalties within a single coordinate descent scheme.

  2. The algorithm incorporates a Huber type smooth approximation of the check loss and an augmented Lagrangian formulation to enforce the zero-sum constraint, enabling optimization even with nonconvex penalties.

  3. The system can achieve explicit closed-form thresholding updates for all three penalty families, providing tractable solutions for high-dimensional coefficient estimation and variable selection tasks.

  4. The theoretical framework guarantees that the stopping tolerance controls both the zero-sum constraint error and the KKT stationarity residual, ensuring high accuracy at termination.

  5. Local convergence proofs establish that coefficient and multiplier iterates converge to a Karush–Kuhn–Tucker pair under regularity conditions, allowing for reliable local prediction of model parameters.

  6. The system can be initialized using preliminary estimators derived from working independence formulations, including methods like the one described by pooling observations across all follow-up times under working independence.

  7. Real-data analysis demonstrates the ability to identify quantile specific associations between relative sectoral composition and regional economic output, providing interpretable insights for policy making.

Related papers