Getting the picture - Subtractive color mixing with an inkjet printer

arXiv:2611.06943 · physics.ed-ph · Submitted 2026-11-02 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Getting the picture - Subtractive color mixing with an inkjet printer".

Mira: Here's the gist of the paper. Getting the picture - Subtractive color mixing with an inkjet printer describes a method for physics instructors to demonstrate subtractive color mixing using imaging software and an inkjet printer.

Kai: The paper details how to decompose an image into CMYK layers in GIMP, convert the color space, and then print each layer on a transparency stacked on white paper to achieve a simulated color photograph.

Mira: Subtractive Color Decomposition Process The process begins by opening the image in GIMP and separating it into four layers corresponding to CMYK.

Kai: The user must then change the color space from RGB to CMYK and click OK, which creates four layers expressed in black and white intensity information.

Paper summary: Kai: So we've been talking about how this paper shows a way to demonstrate subtractive color mixing using GIMP and an inkjet printer. The main thesis is that you can decompose an image into CMYK layers, invert them to simulate ink deposition, and then stack those transparencies to achieve a simulated color photograph.

Mira: It claims that this procedure effectively shows the physical process of how cyan magenta yellow and black inks mix when applied in print, even though it’s not aiming for a true-color match with the screen.

Lev: The paper is showing that you can create a visual model where white regions deposit no ink and black regions deposit more ink based on those inverted layers. That's the key physical concept they are trying to illustrate.

Kai: It matters because it gives physics instructors a hands-on way to move beyond just talking about additive color mixing, which is what we see with light, and into the subtractive primaries of pigments.

Mira: And it touches on the historical context too, referencing how this relates back to early experiments with primary colors by pioneers like Maxwell. It frames the modern printing process within that older understanding of color science.

Lev: If you were to build a demonstration for a physics class, you wouldn't be showing them light mixing; you'd be showing them pigment mixing via ink layers, which is a different physical system entirely.

Kai: It’s about making the abstract concept of subtractive color mixing concrete by using tangible printing materials. We’re moving from theoretical light addition to practical ink subtraction.

Mira: The paper points out that while this is a good demonstration, it also highlights the inherent difficulty in translating colors perfectly from a digital screen representation into physical ink deposition on paper.

Lev: That translation problem is real; the authors themselves admit that exact color matching when translating from screen to print is often problematic, which means their simulation might not be perfectly accurate in terms of final hue.

Kai: So, the point isn't flawless reproduction; it’s demonstrating the *process* of how ink layers build up a final perceived color photograph. It’s about showing the mechanism.

Mira: And that mechanism is based on those specific CMYK layer manipulations, like inverting them to represent ink density rather than just RGB values. That inversion is crucial for simulating subtraction.

Lev: For someone building error correction hardware, this decomposition process would be a major source of potential noise or error if you tried to map those digital values directly onto physical ink volumes.

Kai: It’s about showing the difference between how light adds up and how physical pigments subtract from the white background. That distinction is what this demonstration is trying to highlight.

Conclusion: Kai: So looking at this whole piece, "Getting the picture - Subtractive color mixing with an inkjet printer," it’s really about using a print setup to teach the physics of subtractive color mixing instead of just additive light mixing.

Mira: The authors are David Marasco and they use the CMYK process as a practical way to model how pigments actually work when you layer them up, from lightest ink to darkest.

Lev: The implication for someone interested in hardware is that this setup is more about showing the principle than building a perfect color reproduction engine; it’s a conceptual tool.

Kai: It suggests that for teaching physics concepts involving light, we should embrace both additive and subtractive systems, using the print demonstration to bridge that gap between theory and tangible physical reality.

Mira: And it reminds us that even simple tools like an inkjet printer can be used to explore complex physical phenomena if you approach them with the right mathematical framing, like decomposing the image into those four distinct ink layers.

Lev: The limitations they mention are important; they state that exact color matching between the screen and print is often problematic, which means you have to be careful when using this as a direct measurement tool for absolute color fidelity.

Kai: So in short, it’s a teaching tool that uses ink layering to illustrate subtractive color mixing, acknowledging that perfect screen-to-print translation isn't always achievable with this method.

Mira: And the historical reference to Maxwell shows how these fundamental concepts of primary colors have been around for a long time, even if we use different technologies now to explore them.

Lev: It’s an interesting exercise in analogy; you take a complex digital problem and map it onto a physical ink problem, which is something we deal with constantly when trying to model real-world systems.

physics.ed-ph

Submitted: 2026-11-02

Updated: 2026-11-02

Comments: 3 pages, one figure

Journal ref: David Marasco; Getting the picture - Subtractive color mixing with an inkjet printer. Phys. Teach. 1 November 2026; 64 (8): 766-767

DOI: 10.1119/5.0349953

License: http://creativecommons.org/licenses/by-nc-sa/4.0/

Importance score: 62/100

The gist: Getting the picture - Subtractive color mixing with an inkjet printer describes a method for physics instructors to demonstrate subtractive color mixing using imaging software and an inkjet printer.

Key concepts

CMYK Decomposition
This involves taking a digital image and separating it into four distinct layers representing Cyan, Magenta, Yellow, and Key (black) inks. This process changes the color space from the standard RGB used on screens to a subtractive model where colors are created by mixing physical pigments.
Color Space Conversion
The software must change the image's color space from RGB to CMYK. This step translates the digital light information into instructions for printing. After conversion, the layers are adjusted using inversion to represent how much ink should be deposited in each area.
Subtractive Color Mixing
This is a physical process where inks absorb certain wavelengths of light. When you layer Cyan, Magenta, and Yellow inks on a transparent surface, they physically mix to create new colors. The paper uses this method to show the underlying physics of how print color is formed.
Transparency Stacking
The final image is built by printing each CMYK layer separately onto a transparent sheet. These sheets are then carefully stacked on top of white paper in a specific order—from light ink to dark ink—to simulate the final, mixed photograph.

Terminology

Summary

Getting the picture - Subtractive color mixing with an inkjet printer describes a method for physics instructors to demonstrate subtractive color mixing using imaging software and an inkjet printer. p. 0

Where the paper says it

Black is used as an additional layer due to mixing issues concerning the imperfections of the CMY pigments. 6 With imaging software, an inkjet printer, and some transparencies, physics instructors are just a few keystrokes away from being able to demonstrate subtractive color mixing.

The paper details how to decompose an image into CMYK layers in GIMP, convert the color space, and then print each layer on a transparency stacked on white paper to achieve a simulated color photograph. p. 1
Where the paper says it

have found this unnecessary for this exercise. The transparencies are stacked on top of a piece of white paper from lightest ink to darkest (YMCK) to get a color photograph.

Subtractive Color Decomposition Process

The process begins by opening the image in GIMP and separating it into four layers corresponding to CMYK. The user must then change the color space from RGB to CMYK and click OK, which creates four layers expressed in black and white intensity information. p. 0

Where the paper says it

Click Colors>Components>Decompose to open the appropriate dialog box and change the color space from RGB to CMYK, and click OK. This creates four layers, each corresponding to a channel with the desired color information.

To force a subtractive scheme, the values in these layers need to be inverted using Colors>Invert for each layer. p. 0
Where the paper says it

Note that while these layers are labelled with the different colors, as they give intensity information they are expressed in black and white. While GIMP is assuming additive colors, we are forcing a subtractive color scheme, therefore we need to invert the values in these layers, using Colors>Invert for each layer (for those familiar with film photography, the layers should resemble negatives).

These resulting layers provide instructions on ink deposition, where white regions deposit no ink and black regions lay down more ink. p. 0
Where the paper says it

The resulting layers give information about how the printer should deposit ink. In white regions it will deposit no ink, and in black regions it will lay down more ink.

Color Reconstruction Steps

The final color image is constructed by converting the document back to color by selecting Image>Mode>RGB. For the cyan layer, the foreground color should be set to (00FFFF, or 0% red, 100% green, 100% blue) and the background color should be white (FFFFFF). p. 0

Where the paper says it

As the eventual product will consist of actual layers of cyan, magenta, yellow, and black, the document must be converted back into color by selecting Image>Mode>RGB. In the cyan layer the foreground color should be set to (00FFFF, or 0% red, 100% green, 100% blue) and the background color should be white (FFFFFF).

The magenta and yellow layers are converted using (FF00FF) and (FFFF00) as the foreground colors, respectively. p. 0
Where the paper says it

Once that is done choose Colors>Map>Gradient Map to convert the layer to cyan. Do the same for the magenta and yellow layers using (FF00FF) and (FFFF00) as the foreground colors.

The black layer is left as it is because it is already in black and white. p. 0
Where the paper says it

Do the same for the magenta and yellow layers using (FF00FF) and (FFFF00) as the foreground colors. The black layer is fine, as it is already in black and white.

Physical Printing Assembly

To construct the final product, each layer must be printed individually on a transparency. It is recommended to use aligning marks in each layer to aid in lining up the four transparencies. p. 0

Where the paper says it

To construct the resulting color image, print each layer individually on a transparency. While it is best practice to put aligning marks in each layer to aid in lining up the four transparencies, I

The transparencies are then stacked on top of a piece of white paper from lightest ink to darkest (YMCK) to obtain the color photograph. p. 1
Where the paper says it

have found this unnecessary for this exercise. The transparencies are stacked on top of a piece of white paper from lightest ink to darkest (YMCK) to get a color photograph.

Classic overhead projectors can also be utilized if available. p. 1
Where the paper says it

The transparencies are stacked on top of a piece of white paper from lightest ink to darkest (YMCK) to get a color photograph. If your school still has classic overhead projectors available they can also be used.

Demonstration and Limitations

The demonstration aims to show subtractive color mixing rather than creating a true-color image. The paper notes that exact color matching when translating from screen to print is often problematic. p. 1

Where the paper says it

As a print of the original picture results in the proper blue, the color shift is most likely due to issues in the initial decomposition into the CMYK layers. While exact color matching when translating from screen to print is often problematic, the point of this demonstration is to show subtractive color mixing rather than create a true-color image.

A sample shows the blue shirt shifting to a purple hue, suggesting issues in the initial CMYK layer decomposition. p. 1
Where the paper says it

The blue shirt in the original photo has shifted to a purple hue. As a print of the original picture results in the proper blue, the color shift is most likely due to issues in the initial decomposition into the CMYK layers.

The tartan scarf is mentioned as an homage to the very first color photo created by Thomas Sutton at James Clerk Maxwell's behest.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Subtractive Color Mixing Demonstration in Digital Environments: The system can allow physics instructors to demonstrate subtractive color mixing using imaging software like GIMP by forcing an additive RGB space into a subtractive CMYK scheme, enabling students to visualize how pigments work when printing ink onto paper.

  2. CMYK Layer Decomposition and Inversion: The AI system can automatically separate an image into four layers corresponding to cyan, magenta, yellow, and black channels after switching the color space from RGB to CMYK, and invert these values "using Colors>Invert for each layer" to simulate how ink deposition occurs on a substrate.

  3. Color Mapping for Print Simulation: The system can convert the resulting CMYK layers back into an RGB mode and apply specific foreground colors like (00FFFF, or 0% red, 100% green, 100% blue) to the cyan layer using "Colors>Map>Gradient Map to convert the layer to cyan," thereby simulating how specific inks mix in a physical print.

  4. Physical Print Construction Simulation: The AI system can guide users through constructing a color image by instructing them to print each layer individually on a transparency and stacking them on paper from lightest ink to darkest (YMCK) to get a color photograph, providing a step-by-step workflow for physical reproduction.

Abstract

When teaching colors, physics teachers ask their students to ignore what is taught in art classes and embrace a primary color system of red, green, and blue. This scheme is additive and all colors can be generated by combining light of these three colors with varying intensities. There have been a number of demonstrations and tools to help students understand additive color mixing, using LEDs, color monitors, or similar technologies. However, the subtractive primaries of cyan, magenta, and yellow have received far less attention, if students have previous knowledge it is from printer ink cartridges. This gap may exist because as pigments it can be harder to vary their intensities in real time. Fortunately, our colleagues in the art department are well-versed in subtractive color mixing, and have taught this topic for many years through the lens of color printing. We steal a page from their book and describe how to create a color image using cyan, magenta, yellow, and black layers (CMYK). Black is used as an additional layer due to mixing issues concerning the imperfections of the CMY pigments. With imaging software, an inkjet printer, and some transparencies, physics instructors are just a few keystrokes away from being able to demonstrate subtractive color mixing.

Related papers