Ground-State Heavy-Baryon Mass Spectrum in the Relativistic Independent Quark Model
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Ground-State Heavy-Baryon Mass Spectrum in the Relativistic Independent Quark Model".
Mira: Here's the gist of the paper. Ground-state heavy-baryon mass spectrum in the relativistic independent quark model extends work to compute ground-state baryon mass spectra containing charm and bottom quarks in the relativistic independent quark (RIQ) model with an average flavor–independent confining potential in equally mixed scalar–vector harmonic form The resulting core mass is then corrected perturbatively, accounting for the pion selfenergy, pion exchange, and pairwise color–electric and color–magnetic one-gluon exchange Model Framework The model treats the baryon throughout as a three-quark state by projecting the full localized product of three ground-state Dirac orbitals onto zero total momentum using the numerical Peierls–Yoccoz (PY) projection method.
Kai: The steps involved are: 1.
Mira: solve the Dirac equation for each quark flavor 2.
Kai: build the color–singlet three-quark state with the appropriate spin-pair coefficients 3.
Paper summary: Lev: So where does this paper sit in terms of what we can actually use for real calculations right now? Is this a tool that gives us immediate answers, or is it more about guiding future simulations?
Kai: The paper shows that by optimizing those six input parameters—the potential strengths and the quark masses—they can predict sixteen calibration baryon masses as close as possible to experimental values. They state that the signed differences, which are the difference between their model mass and the experimental mass, stay below about one point one percent for every state.
Mira: That level of agreement with experiment is pretty strong given that this is a model built on independent quark dynamics. They also note that across the full light-to-bottom mass range, the RIQ predictions track experimental masses within about one point one percent, which is comparable to what we see from lattice QCD and quark-diquark models.
Lev: So, if you're looking at this for real hardware design or error correction research, what does this tell you about the difficulty of running these kinds of calculations on actual computational resources?
Kai: The paper mentions that they did a six-parameter optimization, and they compared their results against those other theoretical models. They found consistency with lattice QCD predictions and experimental measurements where data exists.
Mira: The paper does acknowledge its limitations, though, which is that the residual interactions are treated perturbatively on top of the projected core mass. This means the relative importance of these corrections changes depending on which flavor sector you're looking at, so it's not a universal fix for every single splitting in a baryon spectrum.
Lev: So it’s not perfect across the board, but it provides a consistent framework that is well-grounded against existing high-level theories. It seems like this model offers a good way to predict those unobserved states, which is useful for guiding where to look next in experimental searches or theory development.
Kai: Exactly. The projected core mass is the dominant contribution to the total baryon mass, and the residual interactions are what generate those fine and hyperfine splittings that make them distinct from each other. The paper shows this model works well for predicting both known states and for suggesting where new physics might be hiding in unobserved states.
Conclusion: Kai: So, basically, this paper looks at how to calculate the mass spectrum for heavy baryons—those made of charm or bottom quarks—using this relativistic independent quark model.
Mira: Right, so they're extending work that already did this for ground-state baryons without heavy quarks to include those heavier flavors.
Kai: They use a method called the relativistic independent quark model, and they build the entire baryon from three individual quarks.
Mira: The key thing here is how they handle the math; they project the full product of those three quark orbitals onto zero total momentum to get that core mass.
Kai: It's clever because you can't just use a simple calculation for the total momentum of those three quarks, so this projection step fixes that unwanted center of mass motion exactly.
Mira: And on top of that projected core mass, they add corrections—things like pion self-energy and one-gluon exchange—which are treated as small perturbations.
Kai: They found that when they optimize the six input parameters used in the model, their predictions for sixteen calibration baryon masses match experimental values within about one point one percent.
Mira: That's a pretty tight fit, especially when you look at the whole range from light quarks all the way up to bottom quarks.
Kai: It's interesting because they compared their results against lattice QCD and quark-diquark models, and they ended up being consistent with those other high-level theories.
Mira: So it suggests this specific framework is a solid tool for understanding how these heavy baryons behave before we even look at the most complex lattice simulations.
Kai: And that’s where it gets interesting; they also looked at states that haven't been measured yet, and their predictions are still within about one point zero percent of what we expect.
Mira: It opens up a way to test those models against future experimental searches for heavier baryons that we haven't seen before.
Divyajyoti Pandeya, Kalpalata Dash, Sanjay Kumar Swain
National Institute of Science Education and Research · Homi Bhabha National Institute
hep-ph
Submitted: 2026-11-04
Updated: 2026-11-04
Comments: 11 pages, 2 figures, 4 tables
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 76/100
The gist: Ground-state heavy-baryon mass spectrum in the relativistic independent quark model extends work to compute ground-state baryon mass spectra containing charm and bottom quarks in the relativistic…
Key concepts
- Relativistic Independent Quark (RIQ) Model
- This model treats each quark as an independent particle moving within a mean field created by the other quarks. It uses a Dirac equation to describe the quark's wave function, incorporating relativistic effects crucial for accurately predicting baryon properties like mass.
- Peierls–Yoccoz (PY) Projection Method
- This numerical method is used to project the product of three individual quark wave functions onto a state with zero total momentum. This step is necessary because the simple product state does not have the correct total momentum, ensuring translational invariance for calculating the true baryon core mass.
- Residual Interactions
- These are small corrections to the main mass calculated from confinement. They include effects like one-gluon exchange, which causes spin splittings, and pion cloud corrections arising from chiral symmetry. These are added perturbatively to refine the core mass prediction.
Terminology
Summary
Ground-state heavy-baryon mass spectrum in the relativistic independent quark model extends work to compute ground-state baryon mass spectra containing charm and bottom quarks in the relativistic independent quark (RIQ) model with an average flavor–independent confining potential in equally mixed scalar–vector harmonic form The resulting core mass is then corrected perturbatively, accounting for the pion selfenergy, pion exchange, and pairwise color–electric and color–magnetic one-gluon exchange
Model Framework
The model treats the baryon throughout as a three-quark state by projecting the full localized product of three ground-state Dirac orbitals onto zero total momentum using the numerical Peierls–Yoccoz (PY) projection method. The steps involved are:
-
solve the Dirac equation for each quark flavor
-
build the color–singlet three-quark state with the appropriate spin-pair coefficients
-
project onto zero momentum to obtain the baryon core mass
-
calculate the pionic and gluonic corrections
-
sum the contributions
The single-quark Dirac equation describes each constituent quark of mass mq moving in a mean-field Hamiltonian of the form Hq = α·p+βmq +U(r), U(r) = 1/2 (1+β)ar2 +V0. The resulting eigenvalue equation Hqψ = Eqψ gives the solutions for the quark wave function. p. 1 The potential is an equal admixture
of a Lorentz-scalar confinement S(r) = 1
2
(ar2 +V0), added
to the mass term through β, and a time-like Lorentz-vector
confinement V(r) = 1
2
(ar2 +V0) of the same strength. With
the substitution of
E
′
q = Eq −
V0
2
, m
′
q = mq +
V0
2
, λq = E
′
q +m
′
q
(2)
the eigenvalue equation Hqψ = Eqψ gives the solutions for
the quark wave function
ψnκm(r) =
i
gnκ (r)
r
Ωκm(rˆ)
−
fnκ (r)
r
Ω−κm(rˆ)
(3)
Here gnκ (r) and fnκ (r) are, respectively, the large (upper)
and small (lower) radial wave functions, n is the radial quantum number, Ωκm are the usual spherical spinors, m the
magnetic quantum number, and κ is the relativistic (Dirac)
quantum number that fixes both the total angular momentum
j = |κ| − 1
2
and the orbital angular momenta of the upper
and lower components.Where the paper says it
Kinematics and Core Mass Calculation
The center-of-mass correction is necessary because the product wave function is not an eigenstate of the total momentum operator Pˆ = ∑i pˆi. The mean-square momentum of a confined quark can be written in terms of two radial integrals. p. 2 To remove the CM contribution, we first need to estimate
the momentum carried by each quark. For a Dirac radial
wave function with upper component g(r), corresponding
to orbital angular momentum l, and lower component f(r),
with l
′ = l + 1, the mean-square momentum of a confined
quark can be written in terms of two radial integrals. To correct this unwanted CM contribution in the baryon
mass calculation, we use the PY projection method. The
method restores translational invariance exactly, at the level
of the wave function itself, by explicitly projecting the product state Φ onto zero total momentum. A single relativistic particle of mass M carrying momentum
P has energy √
M2 +P2
. Averaging this over the distribution ρ(P) and demanding that the result reproduce the total
independent-quark energy E0 fixes the projected mass Mcore
self-consistently,
Z ∞
0
ρ(P)
q
M2
core +P2 dP = E0 = ∑
i
Ei (16)
which is solved numerically to obtain the baryon core mass,
Mcore.Where the paper says it
Where the paper says it
Where the paper says it
Residual Interactions
The confined three-quark core gives the gross mass scale, and fine and hyperfine splittings arise from residual QCD interactions not included in the mean confining field. Two types of contributions are included:
-
One-gluon exchange, which produces both a spin-independent energy shift and a spin-dependent hyperfine contribution at short interquark distances
-
Pion cloud corrections, which follow from the approximate chiral symmetry of QCD for light u,d quarks. p. 5
Where the paper says it
2 Pion cloud and the quark–pion coupling The second residual effect is present only for the light u,d quarks, with no counterpart for s,c,b. It follows from the approximate chiral symmetry of QCD.
These residual contributions are treated perturbatively on top of the PY-projected core mass Mcore. p. 3 Both types of interactions are treated perturbatively on top
of the PY-projected core mass Mcore of Sec. Importantly,
all residual contributions are evaluated using the same Dirac
orbitals gq(r), fq(r), that were obtained from the confining
Hamiltonian and used in determining Mcore.Where the paper says it
Results and Comparison
The confinement and constituent-mass input parameters are optimized to predict sixteen calibration baryon masses as close as possible to experimental values, with signed differences ∆M = MRIQ − Mexp remaining below about 1.1% for every state. p. 3 Importantly,
all residual contributions are evaluated using the same Dirac
orbitals gq(r), fq(r), that were obtained from the confining
Hamiltonian and used in determining Mcore. The final physical baryon mass is then the sum of the projected core and the
four residual contributions,
MB = Mcore +∆E
E
g +∆E
M
g +∆E
self
π +∆E
exch
π
(17)
Treating these four terms perturbatively is only justified if
they are actually small compared to the core, and it is monitored explicitly through the residual-to-core ratio
R =
|∆E
self
π
|+|∆E
exch
π
|+|∆E
E
g
|+|∆E
M
g
|
|Mcore|
(18)
which is evaluated for every predicted state. The percentage deviation, defined as
(Mtheory −Mexp)/Mexp ×100, where Mtheory is the predicted
mass, is shown for each baryon. The RIQ predictions (filled
circles) track the experimental masses [41] closely across the
full light-to-bottom mass range, with deviations comparable
in size to, and for several states smaller than, those of the
lattice-QCD and quark-diquark-model calculations. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. Our results are consistent with the predictions from
these two theoretical models as well as experimentally measured values.Where the paper says it
Where the paper says it
Where the paper says it
Summary and Conclusions
The paper presents a heavy–flavor extension of the Barik–Dash relativistic independent-quark model, retaining the confining Dirac dynamics and perturbative residual-interaction philosophy. The explicit momentum projection, infrared-regulated running coupling, one-gluon exchange, and pion-cloud corrections are added perturbatively to the projected core mass. p. 6 The confining Dirac dynamics
and the perturbative residual-interaction philosophy of the
original RIQ model are retained at the single-quark level. The explicit momentum projection, the infrared-regulated
running coupling, one-gluon exchange and the pion-cloud The corrections
from pion self-energy, pion-exchange, and pairwise colorelectric/magnetic one-gluon-exchange corrections are added
perturbatively to the projected core mass. A six-parameter optimization is performed to predict the masses for the full doubly heavy, mixed-bc, and triply heavy ground-state spectra. The corrections
from pion self-energy, pion-exchange, and pairwise colorelectric/magnetic one-gluon-exchange corrections are added
perturbatively to the projected core mass. A six-parameter optimization is performed to predict the masses for the full doubly heavy, mixed-bc, and triply heavy ground-state spectra. A six-parameter optimization is performed to predict the masses for the full doubly heavy, mixed-bc, and triply heavy ground-state spectra. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. A six-parameter optimization is performed to predict the masses for the full doubly heavy, mixed-bc, and triply heavy ground-state spectra. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. Our results are consistent with the predictions from
these two theoretical models as well as experimentally measured values. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. Our results are consistent with the predictions from
these two theoretical models as well as experimentally measured values. The results
are accordingly best regarded as predictions of an extended,
RIQ-inspired model rather than a direct reproduction of the
original construction. The spurious translational motion is
removed by a self-consistent numerical Peierls–Yoccoz projection of the full three-orbital overlap kernel. The spurious translational motion is
removed by a self-consistent numerical Peierls–Yoccoz projection of the full three-orbital overlap kernel. The corrections
from pion self-energy, pion-exchange, and pairwise colorelectric/magnetic one-gluon-exchange corrections are added
perturbatively to the projected core mass. Figure 2
shows the same comparison for the eighteen measured states
of Table 3, confirming our model agreement holds beyond
the calibrated baryons themselves. The projected core mass, Mcore, provides the dominant
contribution to the total baryon mass, while the residual interactions generate spectroscopic splittings. The projected core mass, Mcore, provides the dominant
contribution to the total baryon mass, while the residual interactions generate spectroscopic splittings. The relative importance of these corrections varies across the different flavor
sectors.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Table 3 States that were not used for optimizing the input parameters, but have an experimentally measured mass
Table 3 lists states that have an experimentally measured mass and serve as a genuine test of our optimized model parameters.
Table 4 States predicted by theoretical models but not yet observed experimentally
Table 4 extends the study to additional ground-state baryons whose masses have not yet been measured experimentally, including unobserved states from the same flavor sectors as well as mixed-bc and triply heavy baryons. The RIQ predictions are within about ±1. p. 0 The available data from
experiments on charmed and bottom baryons [4] have made
it possible to study light and heavy quarks within a single relativistic framework. Several non-relativistic and relativistic
quark potential models have attempted to study the meson
spectrum, both light and heavy-light [5–8], and heavy quarkonia system [9–15], along with the increasingly precise latticeQCD predictions of the meson spectrum [16]. The available data from
experiments on charmed and bottom baryons [4] have made
it possible to study light and heavy quarks within a single relativistic framework. Several non-relativistic and relativistic
quark potential models have attempted to study the meson
spectrum, both light and heavy-light [5–8], and heavy quarkonia system [9–15], along with the increasingly precise latticeQCD predictions of the meson spectrum [16]. The available data from
experiments on charmed and bottom baryons [4] have made
it possible to study light and heavy quarks within a single relativistic framework. Several non-relativistic and relativistic
quark potential models have attempted to study the meson
spectrum, both light and heavy-light [5–8], and heavy quarkonia system [9–15], along with the increasingly precise latticeQCD predictions of the meson spectrum [16]. The available data from
experiments on charmed and bottom baryons [4] have made
it possible to study light and heavy quarks within a single relativistic framework. Several non-relativistic and relativistic
quark potential models have attempted to study the meson
spectrum, both light and heavy-light [5–8], and heavy quarkonia system [9–15], along with the increasingly precise latticeQCD predictions of the meson spectrum [16]. RIQ deviations remain within about ±1. 0% for the fifteen singly-heavy states, and rise to +2. The resulting core mass
is then corrected perturbatively, accounting for the pion selfenergy, pion exchange, and pairwise color–electric and color–
magnetic one-gluon exchange. Six input parameters common to every baryon: the potential parameters (confinement
strength, the potential offset) and the u(= d), s, c, and b
constituent quark masses are optimized using a few experimentally measured baryon states. The resulting core mass
is then corrected perturbatively, accounting for the pion selfenergy, pion exchange, and pairwise color–electric and color–
magnetic one-gluon exchange. Six input parameters common to every baryon: the potential parameters (confinement
strength, the potential offset) and the u(= d), s, c, and b
constituent quark masses are optimized using a few experimentally measured baryon states. The resulting core mass
is then corrected perturbatively, accounting for the pion selfenergy, pion exchange, and pairwise color–electric and color–
magnetic one-gluon exchange. Six input parameters common to every baryon: the potential parameters (confinement
strength, the potential offset) and the u(= d), s, c, and b
constituent quark masses are optimized using a few experimentally measured baryon states.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Table 2 Comparison with Theoretical Models
Table 2 shows a comparison between different theoretical model predictions and the experimentally measured ground-state baryon masses (all in GeV unless noted). The RIQ predictions are within about ±1.1% of the experimental values. p. 1 2 provides detailed information on
the RIQ model framework and the general kinematics, including the single-quark Dirac equation, the center-of-mass
correction and residual interactions used for the calculation. 3 presents the results and discussion on the baryon mass
predictions and comparison with experimental values, along
with predictions from other theoretical models. The resulting spectrum has been compared with LQCD and
RQM predictions, and experimental measurements where
available. Our results are consistent with the predictions from
these two theoretical models as well as experimentally measured values.Where the paper says it
Where the paper says it
Table 4 Predictions for Unobserved States
Table 4 lists states predicted by theoretical models but not yet observed experimentally, including unobserved states from the same flavor sectors as well as mixed-bc and triply heavy baryons. The RIQ predictions are within about ±1.0% for the fifteen singly-heavy states, and rise to +2. p. 8 RIQ deviations remain within about ±1. 0% for the fifteen singly-heavy states, and rise to +2. RIQ deviations remain within about ±1. 0% for the fifteen singly-heavy states, and rise to +2. 2 Percentage deviation (Mtheory −Mexp)/Mexp ×100 of the RIQ (this work), lattice-QCD, and relativistic quark-diquark model masses from
the experimentally measured values, for the eighteen states of Table 3 that have a measured mass but were not used for optimizing input parameters. RIQ deviations remain within about ±1. The percentage deviation, defined as
(Mtheory −Mexp)/Mexp ×100, where Mtheory is the predicted
mass, is shown for each baryon. The RIQ predictions (filled
circles) track the experimental masses [41] closely across the
full light-to-bottom mass range, with deviations comparable
in size to, and for several states smaller than, those of the
lattice-QCD and quark-diquark-model calculations.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can perform self-consistent numerical Peierls–Yoccoz projection to remove spurious translational motion from independent-quark core mass calculations by explicitly projecting localized three-quark states onto zero total momentum.
-
The improved system can utilize a six-parameter optimization scheme, as described in the paper, to predict baryon masses across a wide range of heavy quark systems including doubly heavy, mixed bc, and triply heavy configurations.
-
The AI can incorporate an infrared finite version of the running coupling constant for one-gluon exchange by using the formula alpha s(mu i j) = 4 pi beta0 ln(mu i j + mu2IR)/Lambda2QCDi to avoid the Landau pole divergence.
-
The system can calculate residual interactions perturbatively by summing contributions from one-gluon exchange, pion self-energy, and pion exchange to determine the final physical baryon mass MB = Mcore + deltaE g + deltaE M g + deltaE self pi + deltaE exch pi.
-
The improved AI can assess the relative importance of core versus residual corrections by explicitly calculating the residual-to-core ratio R = delta E self pi + delta E exch pi + delta E g + delta E M g / Mcore.
Abstract
We extend our work to compute the ground-state baryon mass spectrum containing charm and bottom quarks in the relativistic independent quark (RIQ) model with an average flavor--independent confining potential in equally mixed scalar--vector harmonic form. Each quark moves as a Dirac particle inside the potential. The resulting core mass is then corrected perturbatively, accounting for the pion self-energy, pion exchange, and pairwise color--electric and color--magnetic one-gluon exchange. Six input parameters common to every baryon: the potential parameters (confinement strength, the potential offset) and the u(=d), s, c, and b constituent quark masses are optimized using a few experimentally measured baryon states. The model then uses these optimized parameters to predict the mass spectra of doubly heavy, mixed- bc, and triply heavy baryons. We compare our predictions with lattice QCD, relativistic quark model results, and available experimental measurements. Our results are consistent with these model predictions and experimental results.
Related papers
- MadNIS at NLO
- The NANOGrav 15-year data set: A Limit on Continuous Spin Gravitons
- DIS-secting the universe with high-energy neutrinos
- Crowdsourcing Gravitational Waves from Superradiant Axions
- Classification of g-modes for neutron stars with a strong transition: Novel universal relation including slow stable hybrid stars
- Scalar axion field of toroidal electromagnetic pulses