Conflict-Aware Impedance-Sensitivity-Based Tuning for Multi-Mode Damping Enhancement

arXiv:2611.05935 · eess.SY, cs.SY · Submitted 2026-11-04 · Read on arXiv

eess.SY, cs.SY

Submitted: 2026-11-04

Updated: 2026-11-04

Comments: Manuscript is submitted to PESGM2027

License: http://creativecommons.org/publicdomain/zero/1.0/

The gist: Impedance-based eigenvalue sensitivity provides a practical way to relate converter parameters to poorly damped system modes…

Abstract

Impedance-based eigenvalue sensitivity provides a practical way to relate converter parameters to poorly damped system modes, but tuning becomes nontrivial when one parameter improves one target mode while degrading another. This paper introduces a conflict-aware tuning strategy for simultaneous damping enhancement of multiple modes. The method converts impedance-derived eigenvalue sensitivities into normalized damping-ratio sensitivities, diagnoses opposing modal tuning directions, and selects either one parameter or a coordinated pair at each iteration. A low-dimensional max--min problem maximizes the predicted damping of the worst target mode subject to parameter limits, protected-mode constraints, and implementation-specific feasibility requirements. Each accepted update is verified on the full system model and the sensitivities are recomputed. Studies on a four-bus system and a modified IEEE 14-bus system demonstrate the value of pairwise coordination, including a case in which single-parameter tuning stops before the predefined damping target is reached.

Related papers