When light travels with infinite speed: the electromagnetic loop circuits

arXiv:2611.05606 · math-ph, math.MP · Submitted 2026-11-03 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Mathematical Physics. The day in mathematical physics: rigorous models of physical systems.

Kai: We're looking at the paper: "When light travels with infinite speed".

Mira: Here's the gist of the paper. Considering the ideal limit where the speed of light is infinite, or more precisely where the permittivity and permeability of the vaccuum are both zero, we construct a new type of electromagnetic circuit that we name an EM-loop circuit The response is governed by a new class of function pairs - dual Herglotz functions Superpositions of a special class of EM-loop circuits, termed fundamental, allow us to realize any pair of dual Herglotz functions Thus, we have obtained a complete characterization of the response functions of EM-loop circuits.

Kai: The Theoretical Framework The paper introduces EM-loop circuits consisting of E-wires with very high permittivity (E-wires) and M-wires with very high permeability (M-wires) These are threaded together by coils, the E-wire loops and M-wire loops The response is calculated as the net flux of displacement field through a cross section of each E-wire terminal loop and the net magnetic flux through a cross section of each terminal M-wire loop.

Mira: The response is governed by dual Herglotz functions These are symmetric rational block matrix valued functions of the form W(ω) = W11(ω) W12(ω) T W22(ω).

Kai: The duality transformation is given by a specific relation involving the function and its dual.

Paper summary: Mira: To recap what we just touched on, they are focusing on the paper "When light travels with infinite speed: the electromagnetic loop circuits". The core thesis is building this new EM-loop circuit concept in a limit where vacuum permittivity and permeability vanish.

Kai: They define E-wires with very high permittivity and M-wires with very high permeability, threaded by coils and their respective loops. The response is calculated as the net flux of displacement field through an E-wire terminal loop, or magnetic flux through an M-wire terminal loop.

Lev: And they establish that this entire response is characterized by dual Herglotz functions, which are symmetric rational block matrix valued functions defined by W of omega equals W one one W one two T W two two.

Mira: What makes it important is the realization theorem: any pair of these dual Herglotz functions can be achieved through a superposition of fundamental EM-loop circuits. This gives a complete characterization of what kind of responses these circuits can actually produce.

Kai: They use ideal fundamental circuits with no internal nodes for one part, and they use ideal ones that have internal nodes for the other parts in the sum, which is how they build up any desired response function.

Lev: From an engineering standpoint, this means if you want to simulate a specific dynamic response using these loop structures, you just need to stack and tune these fundamental building blocks. It's about realizing complex functions from simple ones.

Mira: And physically, the paper gives an interpretation for omega delta over two as the total time averaged energy flowing into the circuit, which they derive by summing up contributions from terminal E-nodes and M-nodes.

Kai: So it’s a way to look at these circuits not just as abstract mathematical objects, but as systems that have a measurable energy flow associated with them in this extreme limit. This sets up the next part about what the title and authors actually mean for us.

Conclusion: Kai: Thinking about the title "When light travels with infinite speed: the electromagnetic loop circuits", it really frames this whole work as exploring a non-traditional physical regime. It’s not just about high frequencies or materials near resonances, which are what we usually look at in metamaterials research.

Mira: Exactly. The paper is taking us into a limit where the vacuum itself becomes practically inert—permittivity and permeability both zero. This forces you to look at how information transmits instantaneously, even though the math doesn't support traditional waves anymore.

Lev: And what this means for real hardware is that it gives us a complete blueprint for synthesizing dynamic responses from these specific circuit topologies. We know exactly which mathematical functions are possible and how to construct them by superposing the fundamental circuits they defined.

Kai: So, instead of just testing one circuit, we can now theoretically design any response we want by combining these EM-loop circuits. The authors have completely characterized the possible responses of this specific circuit class through this superposition method.

Mira: And it extends previous programs by characterizing all possible dynamic responses for mass-spring networks and electrical networks, focusing specifically on terminal nodes after eliminating the response at internal nodes. That's a big piece of context for where this sits in the broader field.

Lev: The paper flags a limitation, though: they mention that the analysis of taking the limit of epsilon zero and mu zero is left to other investigators because they run into technical issues like leakage of fields, even though the properties of dual Herglotz functions and their duals are established as rational functions of omega squared.

Kai: So, while the mathematical framework is solid—the response functions being rational functions of omega squared—the practical application in taking that zero limit for real-world measurements is something they defer to other groups.

Mira: It means the paper's main contribution isn't necessarily a direct physical prediction at absolute zero vacuum properties, but rather providing the complete mathematical characterization and the construction method for these responses.

Lev: For someone listening to this, it means you have a toolbox of fundamental building blocks that lets you synthesize any desired response function using these EM-loop circuits. That’s the practical application here.

Graeme W. Milton, Pierre Seppecher

University of Utah · Institut de Mathématiques de Toulon, Universitéte de Toulon et du Var

math-ph, math.MP

Submitted: 2026-11-03

Updated: 2026-11-03

Comments: 19 pages, 6 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 78/100

The gist: Considering the ideal limit where the speed of light is infinite, or more precisely where the permittivity and permeability of the vaccuum are both zero…

Key concepts

EM-loop circuit
These are specialized circuits made with E-wires (high permittivity, magnetically invisible) and M-wires (high permeability, electrically invisible) connected by coils. They model electromagnetic behavior in the limit where vacuum properties approach zero.
Dual Herglotz functions
These are symmetric rational block matrix functions that describe the response of EM-loop circuits. They possess a duality transformation, and their properties (like being rational functions of $\omega^2$) establish their positive semi-definiteness, which is crucial for realizing physical responses.
Fundamental EM-loop circuits
These are the basic building blocks of the theory. They serve as fundamental components that can be used in a superposition to construct any complex pair of dual Herglotz functions, thereby allowing for the realization of any desired circuit response.

Terminology

Summary

Considering the ideal limit where the speed of light is infinite, or more precisely where the permittivity and permeability of the vaccuum are both zero, we construct a new type of electromagnetic circuit that we name an EM-loop circuit The response is governed by a new class of function pairs - dual Herglotz functions Superpositions of a special class of EM-loop circuits, termed fundamental, allow us to realize any pair of dual Herglotz functions Thus, we have obtained a complete characterization of the response functions of EM-loop circuits. p. 0

Where the paper says it

It turns out that the response is governed by a new class of function pairs - dual Herglotz functions. Superpositions of a special class of EM-loop circuits, termed fundamental, allow us to realize any pair of dual Herglotz functions.

The Theoretical Framework

The paper introduces EM-loop circuits consisting of E-wires with very high permittivity (E-wires) and M-wires with very high permeability (M-wires) These are threaded together by coils, the E-wire loops and M-wire loops The response is calculated as the net flux of displacement field through a cross section of each E-wire terminal loop and the net magnetic flux through a cross section of each terminal M-wire loop. The response is governed by dual Herglotz functions These are symmetric rational block matrix valued functions of the form W(ω) = W11(ω) W12(ω) T W22(ω). p. 3

Where the paper says it

Like such systems, our loop circuits are associated with net fluxes of energy going into the system, not out of it, but now due to an exponential increase of energy with time t of the form e −iωt with a frequency ω having positive imaginary part. The dual Herglotz functions are symmetric rational block matrix valued functions of the form W(ω) = W11(ω) W12(ω) W12(ω) T W22(ω) , W(ω) = W11(ω) W12(ω) W12(ω) T W22(ω) (2.

The duality transformation is given by a specific relation involving the function and its dual. p. 3
Where the paper says it

2 Dual Herglotz Functions Here we introduce a new class of rational ,matrix valued Herglotz functions that will play an essential role in the subsequent analysis. We will call them dual Herglotz functions as each can be paired with another dual Herglotz function through a duality transformation.

Circuit Elements and Field Definitions

The basic EM-loop circuit elements come in two types: E-wires and M-wires An E-wire consists of a single closed loop dielectric wire wound around a series of circles, C E1, CE2,... CEp called E-nodes The E-wire has permeability µ = 0 so that it is magnetically invisible. p. 5

Where the paper says it

The E-wire has permeability µ = 0 so that it is magnetically invisible. Any segment of the E-wire between a pair of nodes comes paired with a parallel segment of the E-wire between the same set of nodes and having opposite orientation and separated from it by a small distance: we call this pair of segments an E-transmission line.

An M-wire is the magnetic analog of an E-wire, consisting of an oriented single closed loop magnetic wire wound around a series of oriented circles, C M1, CM2,. p. 6
Where the paper says it

An M-wire is the magnetic analog of an E-wire. It consists of an oriented single closed loop magnetic wire wound around a series of oriented circles, C M 1 , CM 2 , .

.. CMp The M-wire has permittivity ε = 0 so that it is electrically invisible. p. 6
Where the paper says it

The total length of all M-transmission lines in the M-wire is ℓ T M. The M-wire has permittivity ε = 0 so that it is electrically invisible.

Characterization of Responses

The response of a fundamental EM-loop circuit is governed by the relation in equation (7.1) This relationship can be expressed in matrix form as equation (4. p. 3

Where the paper says it

Like such systems, our loop circuits are associated with net fluxes of energy going into the system, not out of it, but now due to an exponential increase of energy with time t of the form e −iωt with a frequency ω having positive imaginary part. The dual Herglotz functions are symmetric rational block matrix valued functions of the form W(ω) = W11(ω) W12(ω) W12(ω) T W22(ω) , W(ω) = W11(ω) W12(ω) W12(ω) T W22(ω) (2.

5). The response function W 0(ω) is then given by the block matrix W 0(ω) = W 011 W 012 W 021 W 022. p. 2
Where the paper says it

Our interest is in analyzing the response at the terminal nodes, once the response at the internal nodes is eliminated from the equations. The properties of the matrix valued functions governing this response are given in section 6, implying that the functions are dual Herglotz functions.

This matrix is symmetric, which implies the Herglotz property, meaning ImW ≥ 0 whenever Im(ω 2) ≥ 0 The positive semi-definiteness of W(ω) and its dual is established through these properties. p. 3
Where the paper says it

Also, the duality relation (2. 4) coupled with the positive semi-definiteness of W(0) and W(0) forces W11(0) ≥ 0, W12(0) = 0, W22(0) = 0, W11(0) = 0, W12(0) = 0, W22(0) ≥ 0.

p. 3
Where the paper says it

4) coupled with the positive semi-definiteness of W(0) and W(0) forces W11(0) ≥ 0, W12(0) = 0, W22(0) = 0, W11(0) = 0, W12(0) = 0, W22(0) ≥ 0. The Herglotz property implies that these functions have the representations W(z) = Mω 2 + A + Xn i=1 Di di − ω2 , W(z) = Mω 2 + A + Xn i=1 D i di − ω2 .

Realization of Functions

Any pair of dual Herglotz functions can be realized as a superposition of the fundamental EM-loop circuits This is achieved by using ideal fundamental EM-loop circuits with no internal nodes to realize the first term in (2.15) Similarly, using ideal fundamental EM-loop circuits with an internal node allows for the realization of each term in the sum in (2. p. 2

Where the paper says it

In section 7 we introduce and analyze the fundamental EM-loops circuits. The superposition of these allows us to realize any pair of dual Herglotz functions, thus providing the complete characterization of the possible responses of EM-loop circuits.

15).

Physical Interpretation

The quantity ω∆/2 has the interpretation as the total time-averaged energy flowing into the EM-loop circuit This is derived by summing the energy contributions from terminal E-nodes and terminal M-nodes. The time averaged net flux of energy through a surface S is related to the fields by equation (6. p. 3

Where the paper says it

e with systems that absorb energy). Like such systems, our loop circuits are associated with net fluxes of energy going into the system, not out of it, but now due to an exponential increase of energy with time t of the form e −iωt with a frequency ω having positive imaginary part.

10) This leads to the final expression for the total energy flow in terms of E alpha and E beta. p. 3
Where the paper says it

Herglotz functions are typically associated with passive systems (i. e with systems that absorb energy).

Where the gains come from

The complete characterization of possible electromagnetic responses, including nonlocal responses, of metamaterials in the ε0 = µ0 = 0 limit is important This work extends previous programs by characterizing all possible dynamic responses of mass-spring networks and electrical networks. The analysis focuses on terminal nodes after eliminating the response at internal nodes The study provides a complete characterization of the possible responses of EM-loop circuits through the superposition of fundamental circuits. p. 2

Where the paper says it

In section 7 we introduce and analyze the fundamental EM-loops circuits. The superposition of these allows us to realize any pair of dual Herglotz functions, thus providing the complete characterization of the possible responses of EM-loop circuits.

p. 2
Where the paper says it

In section 7 we introduce and analyze the fundamental EM-loops circuits. The superposition of these allows us to realize any pair of dual Herglotz functions, thus providing the complete characterization of the possible responses of EM-loop circuits.

Pruning redundant reasoning tokens

The indeterminacy of the fields in vacuum with ε0 = µ0 = 0 is similar to that in a rigid body or superconducting body While these equations do not support waves in the traditional sense, some information is transmitted instantaneously. The analysis of the limit ε0 → 0 and µ0 → 0 is left to other investigators due to technicalities like leakage of fields Nonetheless, the work has merit even without taking this limit. p. 2

Where the paper says it

Accounting for all these technicalities would clearly be a very challenging task and so we leave the treatment of this limit to other investigators. Nonetheless, we believe that our work has merit even without taking this limit.

p. 2
Where the paper says it

Accounting for all these technicalities would clearly be a very challenging task and so we leave the treatment of this limit to other investigators. Nonetheless, we believe that our work has merit even without taking this limit.

The properties of W(ω) and its dual are established by showing that they are rational functions of ω squared. p. 3
Where the paper says it

2 Dual Herglotz Functions Here we introduce a new class of rational ,matrix valued Herglotz functions that will play an essential role in the subsequent analysis. We will call them dual Herglotz functions as each can be paired with another dual Herglotz function through a duality transformation.

How the training signal is built

The representation of W(ω) is given by equations (2.15) and (2.16) The quantities ∆ and ∆ have a physical meaning when ω is real and positive The quantities A0 E and A0 M are symmetric real frequency-independent matrices. p. 9

Where the paper says it

involving the symmetric real frequency-independent matrices A0 E = X N j=1 g j En j (n j ) T , A0 M = X M k=1 g k Mmk (mk ) T . 6) A simple EM-loop circuit is shown in Figure 3.

The fundamental EM-loop circuits serve as building blocks for synthesizing the response of any EM-loop circuit The construction allows for realizing any pair of dual Herglotz functions through superposition The final result is that the response of any EM-loop circuit can be mimicked by a superposition of the fundamental ones. p. 2

Where the paper says it

In section 7 we introduce and analyze the fundamental EM-loops circuits. The superposition of these allows us to realize any pair of dual Herglotz functions, thus providing the complete characterization of the possible responses of EM-loop circuits.

The properties of W(ω) and its dual are established by showing that they are rational functions of ω squared. The positive semi-definiteness of W(ω) and its dual is established through these properties. The final result is that the response of any EM-loop circuit can be mimicked by a superposition of the fundamental ones.

The construction allows for realizing any pair of dual Herglotz functions through superposition The final result is that the response of any EM-loop circuit can be mimicked by a superposition of the fundamental ones.

The complete characterization of possible electromagnetic responses, including nonlocal responses, of metamaterials in the ε0 = µ0 = 0 limit is important This work extends previous programs by characterizing all possible dynamic responses of mass-spring networks and electrical networks. The analysis focuses on terminal nodes after eliminating the response at internal nodes. p. 2

Where the paper says it

The remaining nodes are terminal nodes. Our interest is in analyzing the response at the terminal nodes, once the response at the internal nodes is eliminated from the equations.

The study provides a complete characterization of the possible responses of EM-loop circuits through the superposition of fundamental circuits.

The indeterminacy of the fields in vacuum with ε0 = µ0 = 0 is similar to that in a rigid body or superconducting body While these equations do not support waves in the traditional sense, some information is transmitted instantaneously. The analysis of the limit ε0 → 0 and µ0 → 0 is left to other investigators due to technicalities like leakage of fields Nonetheless, the work has merit even without taking this limit.

The complete characterization of possible electromagnetic responses, including nonlocal responses, of metamaterials in the ε0 = µ0 = 0 limit is important This work extends previous programs by characterizing all possible dynamic responses of mass-spring networks and electrical networks The analysis focuses on terminal nodes after eliminating the response at internal nodes The study provides a complete characterization of the possible responses of EM-loop circuits through the superposition of fundamental circuits.

The indeterminacy of the fields in vacuum with ε0 = µ0 = 0 is similar to that in a rigid body or superconducting body While these equations do not support waves in the traditional sense, some information is transmitted instantaneously The analysis of the limit ε0 → 0 and µ0 → 0 is left to other investigators due to technicalities like leakage of fields Nonetheless, the work has merit even without taking this limit.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. New AI systems can model and characterize nonlocal responses of metamaterials in vacuum by constructing EM-loop circuits using E-wires (ENI material with mu = 0) and M-wires (MNI material with epsilon = 0).

  2. AI systems can determine the response functions of these EM-loop circuits by utilizing dual Herglotz functions, which are symmetric rational block matrix valued functions characterized by specific duality transformations.

  3. AI systems can realize any pair of dual Herglotz functions by performing superpositions of fundamental EM-loop circuits, providing a complete characterization of possible responses.

  4. AI systems can analyze the dynamic behavior of mass-spring networks and electrical networks at fixed frequencies using the framework established by EM-loop circuits and their response matrices.

  5. AI systems can design novel electromagnetic structures by synthesizing metamaterial behaviors that mimic any pair of dual Herglotz functions, ensuring the realization of desired frequency responses.

Abstract

Considering the ideal limit where the speed of light is infinite, or more precisely where the permittivity and permeability of the vaccuum are both zero, we construct a new type of electromagnetic circuit that we name an EM-loop circuit. These consist of wires having very high permittivity (E-wires) and wires having very high permeability (M-wires). These are threaded together by coils, the E-wire loops and M-wire loops. Some of the loops are terminal loops, pierced by an applied magnetic flux (for E-wire loops) or an applied displacement field (for M-wire loops) that are outside the vacuum since it does not support these fields. The response is the net flux of displacement field through a cross section of each E-wire terminal loop and the net magnetic flux through a cross section of each terminal M-wire loop. To calculate this response, the fields at the internal loops (those that are not terminal loops) are eliminated from the equations.It turns out that the response is governed by a new class of function pairs - dual Herglotz functions. Superpositions of a special class of EM-loop circuits, termed fundamental, allow us to realize any pair of dual Herglotz functions. Thus, we have obtained a complete characterization of the response functions of EM-loop circuits.

Related papers