Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials

arXiv:2611.05554 · math-ph, math.MP, physics.flu-dyn · Submitted 2026-11-03 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Mathematical Physics. The day in mathematical physics: rigorous models of physical systems.

Kai: We're looking at the paper: "Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials".

Mira: Here's the gist of the paper. The Stroh sextic formalism extends its application to Biot’s poroelasticity by introducing a novel Hamiltonian-based approach to analyze systems where the solid material is incompressible and there is no fluid pressure gradient, offering deeper insights into reversible poroelastic behavior Framework Foundation The Stroh formalism provides a coherent framework for analyzing wave propagation and stress fields in materials with complex, directionally dependent properties It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material The work extends this approach to Biot’s poroelasticity, focusing on scenarios where the solid material is incompressible and there is no fluid pressure gradient A key novelty lies in the derivation of canonical equations under these constraints, enabling clearer interpretations of reversible poroelastic behavior Poroelastic Constraints The study considers a two-dimensional linear, steady poroelastic material with the seepage displacement defined as w = f(U − u) The additional condition for an incompressible solid material is ui,i = div u = e = 0 Furthermore, a relation is established where-ζ = (U − u) · grad f + f ϵ In the case of uniform porosity along with the condition of incompressible solid material, the result is given by ϵ = -f-1 ζ The total stress tensor T is defined as T = σ − αpf1 − p1 Hamiltonian Derivation The Lagrangian density is derived by considering the stored elastic potential energy minus the work carried out by applied external forces over the body B The resulting Lagrangian density is L = 1/2 (T · grad u + pf ζ) or L = 1/2 (σ · E + mζ 2) The canonical equations are derived from the Hamiltonian density H = t2 · u˙ + p2 · w˙ − L The second group of canonical equations yields the equilibrium equation t˙ 2 = -RˆTˆ−1 (t2 − RˆTu,1 + rpf/m e2 + pe2) + Qˆu,1 − pe1 − rpf/m e1,1 Conservation and Structure The Hamiltonian density H is conservative because it satisfies the first condition for energy conservation as none of the terms explicitly depend on x2 The canonical equations derived from H reproduce the equilibrium equations of the system, confirming energy conservation The integral representation shows that the total energy E is conserved because it is independent of the “time-like” variable x2 This conservation law can be derived from the canonical equations of motion and the symmetry of the fundamental matrix Nˆ The study demonstrates the effectiveness of the Stroh–Hamiltonian formalism in analyzing wave propagation, stress distributions, and dynamic responses in incompressible poroelastic materials The framework provides a robust structure for analyzing poroelasticity under perfectly drained conditions where dissipation is neglected The findings highlight the utility of the Hamiltonian formalism in theoretical studies and in designing experiments for systems where incompressibility constraints are relevant While this work focuses on reversible poroelasticity under specific conditions, the application of these principles to more complex, real-world engineering problems remains an area for future exploration Author Contributions Conceptualization and methodology were contributed by K.A.

Kai: and V.T.; formal analysis was done by K.A.

Mira: and V.T.; investigation was performed by K.A., and writing—original draft preparation was done by K.A.; writing—review and editing was done by K.A., and supervision was provided by V.T.

Kai: Funding This research was funded by NextGenerationEU project Transport phonema in low-dimensional structures: models, simulations, and theoretical aspects (CUP D53D23006000006) and NextGenerationEU project Non-linear models for magma transport and volcanoes generation (project code P20222B5P9) Data Availability Statement No new data were created or analyzed in this study.

Title and authors: Kai: We started with the title of this paper, "Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials." It tells us right away that this isn't just applying some old elasticity theory; it’s a new way of looking at it.

Mira: It suggests they are taking the Stroh sextic formalism, which is already good for anisotropic elasticity, and grafting that onto Biot's poroelasticity using a Hamiltonian structure.

Lev: From my side, I see this as an attempt to use the existing mathematical machinery of the Stroh formalism—which handles constraints well—to explicitly model how incompressibility affects the fluid-solid coupling.

Kai: Right, so instead of just treating it as a set of equations, they are treating it like a dynamic system where energy conservation is built into the fundamental structure from the start.

Mira: It means they are deriving canonical equations directly from a Hamiltonian density H, which should give them access to those reversible poroelastic behaviors that are hard to see in simpler formulations.

Lev: I’m interested because if you can build the equations this way, you gain control over the structure of the dynamics and where any error will land when we try to implement it on real hardware.

Kai: That sounds like a big deal for experimental setup, because if we can use this framework, we have a better theoretical map to guide our measurements in these complex poroelastic materials.

Mira: It’s about providing a more interpretable way to see the interplay between the solid being incompressible and how the fluid moves within it, which is what makes this specific model interesting.

Lev: And for me, it means if we can manage those constraints in the derivation, we might be able to simplify the necessary error-correction terms when translating this to a real simulation or hardware.

The paper's summary: Kai: So what’s the actual substance of this paper? They are looking at two dimensions, linear, steady poroelastic materials with seepage displacement defined as w equals f of U minus u.

Mira: They are defining their key variables, and they establish the incompressibility condition for the solid material by setting the volume increment in solid e equals zero and defining zeta as the fluid phase volume increment.

Lev: And they build a relation connecting these variables, which is-zeta equals U minus u dot grad f plus f epsilon, which is important because it links everything together structurally.

Kai: That specific relation is what allows them to then derive the result for uniform porosity when you combine the incompressibility of the solid material.

Mira: When that condition holds, they get a very clean result where epsilon equals minus f inverse zeta, which simplifies things considerably by removing some complexity from the model.

Lev: That simplification is good because it shows that under ideal conditions, you can get an epsilon directly related to the porosity f and the fluid increment zeta.

Kai: It’s a nice way to show that when you impose those constraints, the resulting equations are more manageable than what you'd expect from a general poroelastic problem.

Mira: And they use this entire setup to define the total stress tensor T as sigma minus alpha p f one minus p1, which is the stress definition they are working with throughout.

Lev: That total stress definition is the final output of their derivation, and it’s what you use to calculate all those physical fields like stresses and deformations in this model.

Kai: So they’re showing that even with these strict constraints, you can still get a full description of the system's behavior using this formalism.

Mira: It demonstrates that the Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials is effective for characterizing these systems under perfectly drained conditions where dissipation is neglected.

Lev: The paper confirms that they have successfully built a complete, if highly constrained, model of stress and deformation fields using their method.

The paper's improvements: Kai: Now for the suggested improvements in the paper, they point toward using the canonical equations derived from H to evolve the system. They show that t dot two equals partial H over u is what drives those evolution equations for the generalized coordinates and fluid phase increment.

Mira: That’s a nice move because it shows that you can use that driving force to get the evolution equations for things like the generalized coordinates u dot, which are directly related to partial H over t two.

Lev: On hardware, this is where I have my concerns; translating those equations into real hardware means dealing with those terms in the round brackets in a way that ensures stability and doesn't introduce runaway errors.

Kai: That’s fair, because if we can get the evolution of the generalized coordinates right, it suggests a clearer path to stable numerical solutions for wave propagation.

Mira: And from a theoretical standpoint, it means these equations reproduce the equilibrium equations of the system when you take t dot two equals partial H over u.

Lev: That reproduction is good for checking our theory, but we have to remember that this is only true in the context where dissipation is neglected; so any real-world noise from dissipation will break that exact relationship.

Kai: So they are showing that the Hamiltonian formalism gives us a direct link to the equilibrium equations, which should be useful for verifying numerical solutions against known physical behavior.

Mira: And they are highlighting how this method helps in designing experiments where incompressibility constraints are relevant, which is a practical application of the theory.

Lev: That's a good point for experimental design—you need to know what kind of input you need to feed into the system to test these specific properties derived from this paper.

Conclusion: Kai: So wrapping up, the main implication is that this Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials gives us a powerful way to analyze wave propagation and stress distributions in these constrained systems without dissipation.

Mira: It’s really about using the Hamiltonian structure to get a clearer picture of the reversible behavior under these specific, restrictive conditions imposed by incompressibility.

Lev: For me, it means we have a robust mathematical framework for analyzing these materials even if we can't perfectly model everything they assume about those perfectly drained conditions and neglected dissipation.

Kai: It’s a strong tool for theoretical studies and designing experiments where incompressibility constraints are relevant, ensuring an accurate assessment of mechanical properties and their coupling with fluid effects.

Mira: Ultimately, this paper shows the utility of the Stroh--Hamiltonian Framework for Modeling Incompressible Poroelastic Materials in providing a clear structure to study reversible poroelasticity under these very specific conditions.

Lev: And for me, it means we have a solid mathematical foundation to work with when we design experiments where these constraints matter.

Kinza Arshad, Vincenzo Tibullo

University of Salerno

math-ph, math.MP, physics.flu-dyn

Submitted: 2026-11-03

Updated: 2026-11-03

Journal ref: Mathematics, 2025, 13 (9), 143

DOI: 10.3390/math13091436

License: http://creativecommons.org/licenses/by-nc-nd/4.0/

Importance score: 78/100

The gist: The Stroh sextic formalism extends its application to Biot’s poroelasticity by introducing a novel Hamiltonian-based approach to analyze systems where the solid material is incompressible and there…

Key concepts

Stroh Formalism
A mathematical framework used to analyze wave propagation and stress fields in materials with complex, directionally dependent properties. It is extended here to incorporate constraints from poroelasticity, offering a structured way to describe how waves move through the material.
Incompressible Solid Material
This constraint means the solid part of the material does not change its volume under stress. Mathematically, this is expressed as ui,i = div u = e = 0. This condition simplifies the equations by restricting how the displacement field relates to fluid flow.
Hamiltonian Density (H)
A function derived from the Lagrangian density that is central to the analysis. Because it satisfies conditions for energy conservation, its canonical equations yield equilibrium equations, proving that total energy remains constant in this reversible poroelastic system.

Terminology

Summary

The Stroh sextic formalism extends its application to Biot’s poroelasticity by introducing a novel Hamiltonian-based approach to analyze systems where the solid material is incompressible and there is no fluid pressure gradient, offering deeper insights into reversible poroelastic behavior

Framework Foundation

The Stroh formalism provides a coherent framework for analyzing wave propagation and stress fields in materials with complex, directionally dependent properties It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material The work extends this approach to Biot’s poroelasticity, focusing on scenarios where the solid material is incompressible and there is no fluid pressure gradient A key novelty lies in the derivation of canonical equations under these constraints, enabling clearer interpretations of reversible poroelastic behavior

Poroelastic Constraints

The study considers a two-dimensional linear, steady poroelastic material with the seepage displacement defined as w = f(U − u) The additional condition for an incompressible solid material is ui,i = div u = e = 0 Furthermore, a relation is established where-ζ = (U − u) · grad f + f ϵ In the case of uniform porosity along with the condition of incompressible solid material, the result is given by ϵ = -f-1 ζ The total stress tensor T is defined as T = σ − αpf1 − p1

Hamiltonian Derivation

The Lagrangian density is derived by considering the stored elastic potential energy minus the work carried out by applied external forces over the body B The resulting Lagrangian density is L = 1/2 (T · grad u + pf ζ) or L = 1/2 (σ · E + mζ 2) The canonical equations are derived from the Hamiltonian density H = t2 · u˙ + p2 · w˙ − L The second group of canonical equations yields the equilibrium equation t˙ 2 = -RˆTˆ−1 (t2 − RˆTu,1 + rpf/m e2 + pe2) + Qˆu,1 − pe1 − rpf/m e1,1

Conservation and Structure

The Hamiltonian density H is conservative because it satisfies the first condition for energy conservation as none of the terms explicitly depend on x2 The canonical equations derived from H reproduce the equilibrium equations of the system, confirming energy conservation The integral representation shows that the total energy E is conserved because it is independent of the “time-like” variable x2 This conservation law can be derived from the canonical equations of motion and the symmetry of the fundamental matrix Nˆ

Conclusion

The study demonstrates the effectiveness of the Stroh–Hamiltonian formalism in analyzing wave propagation, stress distributions, and dynamic responses in incompressible poroelastic materials The framework provides a robust structure for analyzing poroelasticity under perfectly drained conditions where dissipation is neglected The findings highlight the utility of the Hamiltonian formalism in theoretical studies and in designing experiments for systems where incompressibility constraints are relevant While this work focuses on reversible poroelasticity under specific conditions, the application of these principles to more complex, real-world engineering problems remains an area for future exploration

Author Contributions

Conceptualization and methodology were contributed by K.A. and V.T.; formal analysis was done by K. p. 0

Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

A. and V.T.; investigation was performed by K. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

A., and writing—original draft preparation was done by K. p. 1
Where the paper says it

In this context, ref. [21] studied Biot’s original formulation of poroelasticity, which included the solid and fluid components of geomaterials, and presented a complete formulation of an indirect boundary element method for poroelastic rocks.

A.; writing—review and editing was done by K. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

A., and supervision was provided by V. p. 4
Where the paper says it

, u,1 = ∂u/∂x1. In particular, Q and T are symmetric and positive definite, provided the strain energy is a positive function.

T.

Funding

This research was funded by NextGenerationEU project Transport phonema in low-dimensional structures: models, simulations, and theoretical aspects (CUP D53D23006000006) and NextGenerationEU project Non-linear models for magma transport and volcanoes generation (project code P20222B5P9)

Data Availability Statement

No new data were created or analyzed in this study. Data sharing is not applicable to this article

Acknowledgments

The authors would like to thank the Gruppo Nazionale per la Fisica Matematica of the Istituto Nazionale di Alta Matematica “Francesco Severi”

Conflicts of Interest

The authors declare no conflicts of interest

References

[1] Stroh, A.N. Steady State Problems in Anisotropic Elasticity [2] Hwu, C. p. 0

Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

; Becker, W. Stroh formalism for various types of materials and deformations [3] Edmondson, R. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

; Fu, Y. Stroh formulation for a generally constrained and pre-stressed elastic material [4] Chadwick, P. p. 0
Where the paper says it

It establishes a coherent framework for analyzing wave propagation and stress fields in materials with complex, directionally dependent properties [2]. It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material [3, 4].

The application of the Stroh formalism to prestressed elastic media [5] Wang, X. p. 0
Where the paper says it

This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis. By recognizing that the Stroh formalism aligns with the canonical Hamiltonian structure, this work extends its application to Biot’s poroelasticity, focusing on scenarios where the solid material is incompressible and there is no fluid pressure gradient.

; Zhou, J.; Chen, Q.; Huang, K.; Xue, Y. Study on the attributes of transverse surface waves in a layered piezoelectric semi-space with surface elasticity theory and Extended Stroh formalism [6] Qu, Y. p. 0
Where the paper says it

It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material [3, 4]. Its utility stems from its ability to not only handle the complexities of anisotropic elasticity but also integrate physical constraints seamlessly into the analysis, making it a foundational tool for researchers and engineers working in material science, mechanics, and wave propagation studies [5, 6, 7, 8, 9].

; Zhu, F.; Pan, E. Defects and waves in anisotropic and layered media: Stroh formalism in terms of the Cartesian system of vector functions [7] Wu, K. p. 4
Where the paper says it

where r represents the cross coupling term between volume changes in the solid and in the fluid. Putting Equations (5) and (6) into the total stress (4) and simplifying, we obtain T = C˜E − rζ1 − p1 (8) We now define a fundamental force vector owing to the fact that we have an incompressible anisotropic solid, following [25, 23] t1 = Te1 = Qu,1 + Ru,2 − rζe1 − pe1 t2 = Te2 = R Tu,1 + Tu,2 − rζe2 − pe2 (9) where Qij = ci1j1, Rij = ci1j2, and Tij = ci2j2 are the usual Stroh matrices and a subscript comma denotes differentiation, e.

C. Extension of Stroh’s formalism to self-similar problems in two-dimensional elastodynamics [8] Houyouk, J. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

; Manyo Manyo, J.A.; Ntamack, G.E.; Azrar, L. Transmission and Reflection and Coefficients of the Periodic Thermoelastic Multilayer Structures with Effect of Interface Using the Pseudo-Stroh Formalism [9] Pan, E. p. 5
Where the paper says it

By the divergence theorem, we can rewrite the total energy L = − Z B LdV (16) where L is the Lagrange density given by L(u,1, u,2, w,1, w,2) = 1 2 T · grad u + 1 2 pf ζ − (rζ + 1 2 p)ui,i (17) the last term counterbalances the effect of the solid’s incompressibility, given that the fluid phase is compressible in poroelastic material. Using (6) along with the definition of fundamental force vectors in (9), we obtain L = 1 2 u,1 · Qu,1 + u,1 · Ru,2 + 1 2 u,2 · Tu,2 + 1 2 mζ2 − pui,i − rζui,i (18) Since the formulation admits the Stroh formalism, the Lagrangian density becomes L = 1 2 (u,1 · Qu,1 + u,1 · Ru,2 + 1 2 u,2 · Tu,2) + 1 2 m(e1 · w,1 + e2 · w,2) 2 − pui,i − rζui,i (19) As the Euler–Lagrange equation is defined as d dx1 ∂L ∂u,1 + d dx2 ∂L ∂u,2 = 0, (20a) d dx1 ∂L ∂w,1 + d dx2 ∂L ∂w,2 = 0 (20b) This takes the form of a Stroh formalism once we identify either coordinate, say x2, as the time-like variable, e.

; Zhu, F.; Li, N.; Qu, Y. Lamb waves in piezoelectric and flexoelectric plates: A new Stroh formalism for gradient electro-mechanics [10] Färm, A. p. 0
Where the paper says it

This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis. By recognizing that the Stroh formalism aligns with the canonical Hamiltonian structure, this work extends its application to Biot’s poroelasticity, focusing on scenarios where the solid material is incompressible and there is no fluid pressure gradient.

; Boij, S.; Glav, R.; Dazel, O. Absorption of sound at a surface exposed to flow and temperature gradients [11] Wang, L. p. 1
Where the paper says it

These features are crucial in many challenges faced in rock mechanics, petroleum engineering, geophysics, and other fields, where the presence of cracks and discontinuities in rock formations affects material behavior. As such, it is essential to consider the effects of the porous medium in these problems, as they significantly influence fluid flow, stress distribution, and overall rock performance.

; Yin, Z.Y.; Chen, W. Characteristics of poroelastic deformation and dissipation of heat and pore pressure in fluid-saturated porous strata [12] Yang, M. p. 4
Where the paper says it

This is referred to as the perfectly drained condition, which ensures that the fluid pressure does not change during mechanical deformation. This uniform pressure distribution holds during the steady-state motion of the solid, assuming dissipation is not considered.

; Sheng, P. Sound absorption structures: From porous media to acoustic metamaterials [13] Benjamin, G. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

; Neil, R.; Daniel, B.; Hamid, K. Impacts of poroelastic spheres [14] Corapcioglu, M. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

Y.; Tuncay, K. Propagation of waves in porous media [15] Berryman, J. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

G.; Wang, H.F. Elastic wave propagation and attenuation in a double-porosity dual-permeability medium [16] Pramanik, D. p. 7
Where the paper says it

For instance, this can be used to analyze wave propagation in an incompressible poroelastic material under perfectly drained conditions for the dispersion relation of compressional and shear waves using the canonical equations. The framework may reproduce the known behavior of wave speeds and attenuation in incompressible materials while highlighting the role of fluid–solid coupling.

; Manna, S.; Nobili, A. p. 1
Where the paper says it

This approach addresses a significant gap in the literature and offers a structured method to study constrained poroelastic systems and highlight the distinctive behavior of the solid phase under incompressibility conditions, where fluid–solid interactions significantly influence stress distribution and deformation. Nobili’s earlier work [25] primarily developed a Stroh-like formulation for reversible poroelasticity under perfectly drained conditions, which also applied in a similar manner to thermoelasticity in perfect conductors [26].

Theory of elastic wave propagation in a fluid-saturated multi-porous medium with multi-permeability [17] Sharma, M. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

Piezoelectric effect on the velocities of waves in an anisotropic piezo-poroelastic medium [18] Chen, H. p. 0
Where the paper says it

It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material [3, 4]. Its utility stems from its ability to not only handle the complexities of anisotropic elasticity but also integrate physical constraints seamlessly into the analysis, making it a foundational tool for researchers and engineers working in material science, mechanics, and wave propagation studies [5, 6, 7, 8, 9].

; Gilbert, R.P.; Guyenne, P. A biot model for the determination of material parameters of cancellous bone from acoustic measurements [19] Shao, J. p. 1
Where the paper says it

Recently, ref. [18] proposed a Biot’s model for deriving material properties of cancellous bone from acoustic measurements.

Poroelastic behaviour of brittle rock materials with anisotropic damage [20] Yang, C. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

; Wang, Y.; Stovas, A.; Wang, L. Modified Biot elastic coefficients in poroelastic solid [21] Abdollahipour, A. p. 1
Where the paper says it

He modified Biot’s equations for cancellous bone and coupled them with a boundary integral equation for water pressure. Biot’s poroelasticity also has widespread application when it comes to poroelastic rocks [19, 20].

; Marji, M.F.; Bafghi, A.Y.; Gholamnejad, J. A complete formulation of an indirect boundary element method for poroelastic rocks [22] Barnett, D. p. 1
Where the paper says it

In this context, ref. [21] studied Biot’s original formulation of poroelasticity, which included the solid and fluid components of geomaterials, and presented a complete formulation of an indirect boundary element method for poroelastic rocks.

M. Bulk, surface, and interfacial waves in anisotropic linear elastic solids [23] Fu, Y. p. 0
Where the paper says it

It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material [3, 4]. Its utility stems from its ability to not only handle the complexities of anisotropic elasticity but also integrate physical constraints seamlessly into the analysis, making it a foundational tool for researchers and engineers working in material science, mechanics, and wave propagation studies [5, 6, 7, 8, 9].

Hamiltonian interpretation of the Stroh formalism in anisotropic elasticity [24] Nobili, A. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

; Radi, E. Hamiltonian/Stroh formalism for anisotropic media with microstructure [25] Nobili, A. p. 0
Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

Hamiltonian/Stroh formalism for reversible poroelasticity (and thermoelasticity) [26] Nobili, A. p. 1
Where the paper says it

This approach addresses a significant gap in the literature and offers a structured method to study constrained poroelastic systems and highlight the distinctive behavior of the solid phase under incompressibility conditions, where fluid–solid interactions significantly influence stress distribution and deformation. Nobili’s earlier work [25] primarily developed a Stroh-like formulation for reversible poroelasticity under perfectly drained conditions, which also applied in a similar manner to thermoelasticity in perfect conductors [26].

; Pichugin, A. Quasi-adiabatic approximation for thermoelastic surface waves in orthorhombic solids [27] Biot, M. p. 0
Where the paper says it

It establishes a coherent framework for analyzing wave propagation and stress fields in materials with complex, directionally dependent properties [2]. It is also a foundational method for studying elastic materials with general constraints and has been used to examine the effect of pre-stress on surface waves in an inextensible material [3, 4].

Mechanics of deformation and acoustic propagation in porous media [28] Berger, L. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

; Bordas, R.; Kay, D.; Tavener, S. A stabilized finite element method for nonlinear poroelasticity [29] Abousleiman, Y. p. 1
Where the paper says it

In this context, ref. [21] studied Biot’s original formulation of poroelasticity, which included the solid and fluid components of geomaterials, and presented a complete formulation of an indirect boundary element method for poroelastic rocks.

; Ekbote, S. Porothermoelasticity in transversely isotropic porous materials [30] Schanz, M. p. 4
Where the paper says it

Strong ellipticity stipulates that Q and T must be positive definite, and m > 0. For convenience, we adopt an isotropic approximation for the cross-coupling term; for a comprehensive treatment of transverse anisotropy, see [32].

Poroelastodynamics: Linear models, analytical solutions, and numerical methods [31] Biot, M.A.; Willis, D.G. The elastic coefficients of the theory of consolidation [32] Biot, M. p. 0
Where the paper says it

Poroelastic materials are extensively utilized across various fields of physics due to their exceptional dissipative properties [10, 11, 12, 13]. Particularly, Biot’s theory of poroelasticity has established itself as a remarkably effective phenomenological model, with wide-ranging applications across numerous scientific and engineering fields.

Theory of elasticity and consolidation for a porous anisotropic solid [33] Ting, T. p. 0
Where the paper says it

Keywords: Stroh formalism; Biot’s poroelasticity; Hamiltonian formalism; solid incompressibility MSC 2020: 74A05; 74A10; 74A60 1 Introduction The Stroh formalism, introduced by A. Stroh [1], is a key concept in the study of anisotropic elasticity.

C. Anisotropic Elasticity: Theory and Applications; Oxford University Press: Oxford, UK, 1996; Volume 45

Pruning redundant reasoning tokens

The framework assumes perfectly drained conditions and neglects dissipative effects, which limits its applicability to fully realistic scenarios in involving energy loss or complex fluid dynamics This limitation provides a foundational step toward understanding constrained poroelastic systems and paves the way for future extensions to more general cases including dissipative and nonlinear regimes

How the training signal is built

The canonical equations derived from H are evolution equations for the generalized coordinates u˙ = ∂H/∂t2 and w˙ · e2 = −∂H/∂pf These correspond to Equations (36) and (37), which describe the evolution of the system The second group yields the equilibrium equation t˙ 2 = ∂H/∂u that accounts for (28), whereby Tˆ−1 times the term in round brackets gives u˙, and in light of first of (9), amounts to (14a)

Where the gains come from

The conservation of H reflects the reversible nature of the process, where no dissipation occurs It has many interpretations in physics, such as waves traveling forward or backward without attenuation The integral representation highlights the symplectic nature of the system and implies that the total energy E is conserved because it is independent of the “time-like” variable x2 This conservation law can be derived from the canonical equations of motion and the symmetry of the fundamental matrix Nˆ

Integral Representation and Symplectic Structure

The integral representation provides a global perspective on energy conservation and reveals important properties of the system, such as its symplectic structure The fundamental matrix Nˆ plays a central role in this representation since Nˆ is symmetric The Hamiltonian density can be rewritten as a quadratic form associated with Nˆ H = 1/2 ζ · ˆINζ This representation highlights the symplectic nature of the system and implies that the total energy E is conserved

Connection to the Stroh Formalism

The Stroh formalism arises naturally in this framework as described by ∂/∂x2 ζ = Nˆ ∂/∂x1 ζ The evolution of the system is described by this relationship where Nˆ is the fundamental elasticity block matrix This framework may reproduce the known behavior of wave speeds and attenuation in incompressible materials while highlighting the role of fluid–solid coupling The work demonstrates the utility of the Hamiltonian formalism in theoretical studies and in designing experiments for systems where incompressibility constraints are relevant

Conclusions

The incorporation of the incompressibility condition into Biot’s poroelasticity allowed for the selection of appropriate energy–conjugate variable pairs leading to a clearer description of the system The Stroh-like formulation, grounded in Hamiltonian mechanics, provided a robust framework for analyzing poroelasticity under perfectly drained conditions where dissipation is neglected The absence of a fluid pressure gradient imposed constraints on the conjugate variables reducing the degrees of freedom and offering a deeper insight into reversible behavior Our findings demonstrate the utility of the Hamiltonian formalism in theoretical studies and in designing experiments for systems where incompressibility constraints are relevant ensuring an accurate assessment of mechanical properties and their coupling with fluid effects

Conceptualization, K.A. and V.T.; methodology, K.A. and V.T.; formal analysis, K. p. 0

Where the paper says it

Stroh–Hamiltonian Framework for Modeling Incompressible Poroelastic Materials∗ Kinza Arshad† Vincenzo Tibullo‡ Department of Mathematics, University of Salerno, 84084 Fisciano, Italy Abstract The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis.

A. and V.T.; investigation, K. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

A.; writing—original draft preparation, K. p. 1
Where the paper says it

In this context, ref. [21] studied Biot’s original formulation of poroelasticity, which included the solid and fluid components of geomaterials, and presented a complete formulation of an indirect boundary element method for poroelastic rocks.

A.; writing—review and editing, K. p. 1
Where the paper says it

One prominent area of investigation has been the behavior of wave propagation in porous media, a subject comprehensively examined in the review by [14]. The theory itself has undergone significant extensions to address more complex phenomena and broaden its applicability.

A., and V.T.; and supervision was provided by V. p. 4
Where the paper says it

, u,1 = ∂u/∂x1. In particular, Q and T are symmetric and positive definite, provided the strain energy is a positive function.

T.

No new data were created or analyzed in this study.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI system can accurately model wave propagation in incompressible poroelastic materials under perfectly drained conditions for the dispersion relation of compressional and shear waves using canonical equations.

  2. The improved system can reproduce known behavior of wave speeds and attenuation in incompressible materials while highlighting the role of fluid solid coupling by utilizing the Hamiltonian density H derived from the Stroh-Hamiltonian framework.

  3. The system can model stress distribution in multilayered structures with incompressible solid phases subject to external loading and analyze the stress and deformation fields within each layer, leveraging the framework's capability to handle complex geometries and material configurations.

Abstract

The Stroh sextic formalism, developed by Stroh, offers a compelling framework for representing the equilibrium equations in anisotropic elasticity. This approach has proven particularly effective for studying multilayered structures and time-harmonic problems, owing to its ability to seamlessly integrate physical constraints into the analysis. By recognizing that the Stroh formalism aligns with the canonical Hamiltonian structure, this work extends its application to Biot's poroelasticity, focusing on scenarios where the solid material is incompressible and there is no fluid pressure gradient. The study introduces a novel Hamiltonian-based approach to analyze such systems, offering deeper insights into the interplay between solid incompressibility and fluid-solid coupling. A key novelty lies in the derivation of canonical equations under these constraints, enabling clearer interpretations of reversible poroelastic behavior. However, the framework assumes perfectly drained conditions and neglects dissipative effects, which limits its applicability to fully realistic scenarios involving energy loss or complex fluid dynamics. Despite this limitation, the work provides a foundational step toward understanding constrained poroelastic systems and paves the way for future extensions to more general cases, including dissipative and nonlinear regimes.

Sources

Related papers