Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein--Gauss--Bonnet gravity

arXiv:2611.03970 · hep-th · Submitted 2026-11-02 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Theory. The day in high-energy theory: gravity, strings, fields and the questions left open.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein--Gauss--Bonnet gravity".

Mira: Here's the gist of the paper. Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein–Gauss–Bonnet gravity studies whether any local entropy with the correct stationary value can be nondecreasing between every ordered pair of cuts in five-dimensional Einstein–Gauss–Bonnet gravity The Core Problem No covariant local entropy can both reproduce the stationary black-hole entropy and be nondecreasing between every ordered pair of cuts, provided its density is smooth on an invariant open set of off-shell metric and cut jets containing a flat planar cut and every cut used in the argument The difficulty with arbitrary sections was already raised by Bhattacharyya et al.

9: : they could not construct a covariant entropy form for arbitrary Lovelock horizon sections, but did not formally rule out a covariant local entropy that is nondecreasing between every ordered pair of cuts The Mathematical Setup The study considers five-dimensional Einstein–Gauss–Bonnet (EGB) gravity with zero cosmological constant and an action involving the Ricci scalar and the Gauss–Bonnet term The Jacobson–Myers entropy is defined as SJM = Z C (1 + 2α(2)Rq)dµq This stationary value on a round cut of radius L is Sstat = 2π/2 (L cubed + 12α(2)L) The Obstruction Mechanism The obstruction appears at second order in wave amplitude on a smooth horizon, without a merger or topology change Shear makes the intrinsic curvature of a cut depend on its bending The stationary entropy fixes the coefficient of this curvature term, and local corrections cannot cancel its response to cut bending This obstruction is tested by examining the Euler–Lagrange density E

S: = E(x, ψ) ≥ 0 at every point of every graph The Failure of Corrections The two corrections fail for different reasons, as the term coupling the two null second fundamental forms is excluded at first order, while the expansion term cannot cancel a tracefree response at second order The surviving term is set by the first-order shear alone This leads to a contradiction when considering a nonzero tracefree symmetric 3 × 3 matrix, proving that the bending-dependent entropy rate is not nondecreasing The perturbative calculation disproves an identity that an exact law would require, leading to the conclusion that for some finite L and epsilon, E

S: must be negative on some graph The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law

3: The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy This obstruction persists in weakly curved regions with a well-posed local evolution problem Where the gains come from The large-radius limit isolates the leading curvature contribution of any entropy in the stated class The stationary normalization therefore determines one coefficient while leaving the two extrinsic-curvature coefficients unrestricted The argument compares solutions of one EGB theory using their smooth Ricci-flat limit to test an identity that would have to hold at every sufficiently large finite radius Pruning redundant reasoning tokens The paper proves that no local entropy in the class specified below can both reproduce the stationary entropy and be nondecreasing between every ordered pair of cuts of smooth, fixed-topology vacuum horizons The argument relies on a finite Taylor expansion where analyticity is not assumed The freedom to choose arbitrarily bent cuts enters through the exact identity (6), not through a uniform expansion over all cuts How the training signal is built The monotonicity condition leads to the inequality S

ψ: − S

c: ≤ Z Z ψ+δ c e(x, s) ds d3x Keeping c, d fixed and differentiating along ψ + tf proves E

S: = e(x, ψ(x)) ≥ 0 This implies that the local rate of entropy change must be independent of the slope and bending of the cut Pruning redundant reasoning tokens The calculation shows that for some finite L and epsilon, E

S: must depend on graph derivatives and must be negative on some graph The perturbative calculation disproves an identity that an exact law would require The all-cuts argument then produces the decreasing pair for the exact entropy, without extending a perturbative error estimate to arbitrarily large bending Where the gains come from The paper establishes that higher-order terms cannot cancel this identity because their scaling with L is different Only a finite Taylor expansion is needed, and the required jets lie in the fixed planar neighborhood at sufficiently large L The comparison of order-L terms fixes a1 = 2α(2) How the training signal is built The vacuum construction involves solving constraints on a final slice and developing its data backward through a finite interval The linear tensor master field Z, a smooth nonzero radial multiple of β1 = ∂ϵβ0, obeys in these coordinates Zτ τ − Zxx + Veλ(τ, x)Z = 0 This leads to Ze(t, t) = 0 for 0 ≤ t < w/4 Pruning redundant reasoning tokens The final result is that the resulting nonzero bending response is enough for the contradiction, and the sign alone is not yet a calculation of the entropy change between two cuts The obstruction persists in weakly curved regions with a well-posed local evolution problem The large-radius scaling suggests an extension to higher-dimensional Lovelock theories with an Einstein term and a positive Gauss–Bonnet coupling suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions Where the gains come from The study demonstrates that for some finite L and epsilon, E

S: must be negative on some graph The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law

3: suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

9: Pruning redundant reasoning tokens The paper concludes that for some finite L and epsilon, E

S: must be negative on some graph The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law

3: The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

9: Where the gains come from The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy The obstruction persists in weakly curved regions with a well-posed local evolution problem The large-radius scaling suggests an extension to higher-dimensional Lovelock theories with an Einstein term and a positive Gauss–Bonnet coupling suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

9: Pruning redundant reasoning tokens The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law

3: The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

9: Where the gains come from The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law

3: The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

9: Pruning redundant reasoning tokens

Paper summary: Kai: So, wrapping up this paper "Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein--Gauss--Bonnet gravity", the authors find that a covariant local entropy cannot both reproduce the stationary black hole entropy and be nondecreasing between every ordered pair of cuts.

Mira: The title points directly at what they're showing: that the structure of gravity in this five-dimensional setup creates a fundamental obstruction to imposing a simple monotonicity condition on local entropy measures defined on arbitrary horizon sections.

Lev: What this means for us is that if we want to use these kinds of entropy laws—for instance, in trying to define black hole thermodynamics for real physical systems—we have to be very careful about how we define the cuts and what data we assume about them.

Kai: They establish that this obstruction is quadratic in the wave amplitude, but they note it's compatible with the linearized second law three <ref:2611.03970#pg1>. This suggests that while a simple monotonic local law fails, you can still have some form of evolution governed by a second law at the linear level.

Mira: The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid only to effective-field-theory accuracy. It also persists in weakly curved regions where you still have a well-posed local evolution problem.

Lev: That persistence is important for me because it means we don't just dismiss the idea of a second law entirely; it just means the exact form has some restrictions we haven't fully accounted for yet.

Kai: The large radius scaling they used helps isolate the leading curvature contribution, and that stationary normalization fixes one coefficient while leaving the two extrinsic curvature coefficients completely unrestricted.

Mira: It’s a powerful result because it shows that even in these complex gravitational theories, there are built-in limitations on how local entropy can behave when you consider arbitrary cuts.

Conclusion: Kai: So, basically, this paper is about proving that you can't have a local entropy law that works everywhere between any two cuts on these specific black holes in five-dimensional Einstein--Gauss--Bonnet gravity if it also has to match the actual stationary entropy value.

Mira: It’s really focused on how the structure of spacetime in this gravity theory creates this roadblock for those kinds of laws.

Lev: From an error correction standpoint, that means we can't just assume a simple way to track entropy change across different regions without it breaking down somewhere.

Kai: And the authors show that they found this obstruction is actually quadratic in the wave amplitude, which is okay because it still fits with the linearized version of the second law.

Mira: That’s important because it means we don't have to throw out all ideas about a second law entirely; there are just specific conditions on how those cuts behave that we need to respect.

Lev: But they also point out that this problem stays in place even in regions that aren't super curved, which means the issue is more fundamental than just extreme gravity.

Kai: The authors suggest these limitations mean we might be looking at effective field theory accuracy rather than a perfect exact law.

Mira: Exactly, so it tells us how much freedom we actually have when building these thermodynamic descriptions for black holes in this kind of space.

Lev: This leads right into whether we can still make progress on those non-local or data-rich laws that the paper mentions.

Cendikiawan Suryaatmadja, Robert B. Mann

Department of Physics and Astronomy, University of Waterloo · Perimeter Institute

hep-th

Submitted: 2026-11-02

Updated: 2026-11-02

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 71/100

The gist: Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein–Gauss–Bonnet gravity studies whether any local entropy with the correct stationary value can be…

Key concepts

Jacobson–Myers Entropy (SJM)
This is a specific definition of entropy used in the study, calculated as SJM = Z C (1 + 2α(2)Rq)dµq. It represents a stationary value for black holes on round cuts of radius L, which is compared against the actual stationary entropy value (Sstat).
Obstruction Mechanism
The obstruction occurs at the second order in wave amplitude on a smooth horizon without topology change. This means that the intrinsic curvature of a cut depends on its bending, and while the stationary entropy fixes one part of this curvature response, local corrections cannot cancel its effect when the cut bends.
Second Law Failure
The perturbative calculation shows that two potential corrections fail to maintain monotonicity because they either exclude a term coupling the two null second fundamental forms at first order or they cannot cancel a tracefree response at second order. This contradiction proves that the bending-dependent entropy rate is not nondecreasing.
Large-Radius Limit
Analyzing the large-radius limit isolates the leading curvature contribution of any entropy in this class. This comparison tests an identity that must hold for all sufficiently large finite radii, helping to fix a coefficient (a1 = 2α(2)) by comparing solutions from different EGB theories.

Terminology

Summary

Obstruction to local entropy laws on arbitrary black-hole cuts in five-dimensional Einstein–Gauss–Bonnet gravity studies whether any local entropy with the correct stationary value can be nondecreasing between every ordered pair of cuts in five-dimensional Einstein–Gauss–Bonnet gravity

The Core Problem

No covariant local entropy can both reproduce the stationary black-hole entropy and be nondecreasing between every ordered pair of cuts, provided its density is smooth on an invariant open set of off-shell metric and cut jets containing a flat planar cut and every cut used in the argument The difficulty with arbitrary sections was already raised by Bhattacharyya et al. [9]: they could not construct a covariant entropy form for arbitrary Lovelock horizon sections, but did not formally rule out a covariant local entropy that is nondecreasing between every ordered pair of cuts

The Mathematical Setup

The study considers five-dimensional Einstein–Gauss–Bonnet (EGB) gravity with zero cosmological constant and an action involving the Ricci scalar and the Gauss–Bonnet term The Jacobson–Myers entropy is defined as SJM = Z C (1 + 2α(2)Rq)dµq This stationary value on a round cut of radius L is Sstat = 2π/2 (L cubed + 12α(2)L)

The Obstruction Mechanism

The obstruction appears at second order in wave amplitude on a smooth horizon, without a merger or topology change Shear makes the intrinsic curvature of a cut depend on its bending The stationary entropy fixes the coefficient of this curvature term, and local corrections cannot cancel its response to cut bending This obstruction is tested by examining the Euler–Lagrange density E[S] = E(x, ψ) ≥ 0 at every point of every graph

The Failure of Corrections

The two corrections fail for different reasons, as the term coupling the two null second fundamental forms is excluded at first order, while the expansion term cannot cancel a tracefree response at second order The surviving term is set by the first-order shear alone This leads to a contradiction when considering a nonzero tracefree symmetric 3 × 3 matrix, proving that the bending-dependent entropy rate is not nondecreasing

Conclusion and Implications

The perturbative calculation disproves an identity that an exact law would require, leading to the conclusion that for some finite L and epsilon, E[S] must be negative on some graph The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law [3] The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy This obstruction persists in weakly curved regions with a well-posed local evolution problem

Where the gains come from

The large-radius limit isolates the leading curvature contribution of any entropy in the stated class The stationary normalization therefore determines one coefficient while leaving the two extrinsic-curvature coefficients unrestricted The argument compares solutions of one EGB theory using their smooth Ricci-flat limit to test an identity that would have to hold at every sufficiently large finite radius

Pruning redundant reasoning tokens

The paper proves that no local entropy in the class specified below can both reproduce the stationary entropy and be nondecreasing between every ordered pair of cuts of smooth, fixed-topology vacuum horizons The argument relies on a finite Taylor expansion where analyticity is not assumed The freedom to choose arbitrarily bent cuts enters through the exact identity (6), not through a uniform expansion over all cuts

How the training signal is built

The monotonicity condition leads to the inequality S[ψ] − S[c] ≤ Z Z ψ+δ c e(x, s) ds d3x Keeping c, d fixed and differentiating along ψ + tf proves E[S] = e(x, ψ(x)) ≥ 0 This implies that the local rate of entropy change must be independent of the slope and bending of the cut

The calculation shows that for some finite L and epsilon, E[S] must depend on graph derivatives and must be negative on some graph The perturbative calculation disproves an identity that an exact law would require The all-cuts argument then produces the decreasing pair for the exact entropy, without extending a perturbative error estimate to arbitrarily large bending

The paper establishes that higher-order terms cannot cancel this identity because their scaling with L is different Only a finite Taylor expansion is needed, and the required jets lie in the fixed planar neighborhood at sufficiently large L The comparison of order-L terms fixes a1 = 2α(2)

The vacuum construction involves solving constraints on a final slice and developing its data backward through a finite interval The linear tensor master field Z, a smooth nonzero radial multiple of β1 = ∂ϵβ0, obeys in these coordinates Zτ τ − Zxx + Veλ(τ, x)Z = 0 This leads to Ze(t, t) = 0 for 0 ≤ t < w/4

The final result is that the resulting nonzero bending response is enough for the contradiction, and the sign alone is not yet a calculation of the entropy change between two cuts The obstruction persists in weakly curved regions with a well-posed local evolution problem The large-radius scaling suggests an extension to higher-dimensional Lovelock theories with an Einstein term and a positive Gauss–Bonnet coupling suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions

The study demonstrates that for some finite L and epsilon, E[S] must be negative on some graph The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law [3] suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions [9]

The paper concludes that for some finite L and epsilon, E[S] must be negative on some graph The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law [3] The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions [9]

The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy The obstruction persists in weakly curved regions with a well-posed local evolution problem The large-radius scaling suggests an extension to higher-dimensional Lovelock theories with an Einstein term and a positive Gauss–Bonnet coupling suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions [9]

The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law [3] The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions [9]

The obstruction is quadratic in the wave amplitude and is compatible with the linearized second law [3] The result leaves open laws with restricted cut derivatives, entropies using additional or nonlocal data, and laws valid to effective-field-theory accuracy suitable f(R) theories admit a nonlinear second law when f′(R) > 0, under the null energy condition and suitable future boundary conditions [9]

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Precision in entropy calculation for arbitrary cuts can be improved by using an exact law that reproduces stationary black-hole entropy and is nondecreasing between every ordered pair of cuts, provided its density is smooth on an invariant open set of off-shell metric and cut jets containing a flat planar cut and every cut used in the argument. This allows the AI to rigorously test for second law violations under arbitrary spatial slicing.

  2. The AI system can be enhanced to detect entropy decrease in higher-curvature gravity, specifically by analyzing terms beyond the area law such as those involving curvature terms, horizon expansion, or shear, which are known to affect the second law in Einstein-Gauss-Bonnet gravity.

  3. The system can be equipped to distinguish between first and second order obstructions to local entropy laws on smooth event horizon cuts by analyzing the scaling of terms with respect to wave amplitude. This allows for a more refined understanding of where the obstruction manifests, noting that The obstruction appears at second order in wave amplitude on a smooth horizon.

  4. The AI can be used to verify constraints on exact entropy laws by checking the identity derived from the large-radius limit: "If the proposed law held, E AB[S − A] = 0 for every finite L, epsilon. Apply this graph operator to Eq. (28). Each degree-two integral on its right is L times its dimensionless counterpart. Divide by L, take one or two amplitude derivatives at epsilon = 0, and then let L → ∞."

  5. The system can be trained to recognize the shear obstruction by evaluating the expression for the bending-dependent entropy rate: The resulting nonzero bending response is enough for the contradiction. This enables detection of violations arising from how intrinsic curvature depends on cut bending.

Sources

Related papers