Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion

arXiv:2610.24961 · cond-mat.stat-mech, cond-mat.soft · Submitted 2026-10-18 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Run-and-tumble particles in a harmonic external field".

Mira: Here's the gist of the paper. Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion is a method for integrating Langevin equations to compute joint distributions, enabling demonstrations of their equivalence to exact solutions of Fokker–Planck equations The paper introduces a method for integrating the Langevin equations of motion for run-and-tumble particles to compute the joint distribution of their position and active velocity, with and without a harmonic external force field The key step involves constructing the moments of the distribution and correlation functions, conditional on the particles being in a specific state at the final time.

Kai: This approach builds upon Kac's method but aims to provide a general theoretical framework for joint distributions, extending Kac's original idea.

Mira: The work focuses on the red route in Fig.

Kai: 1, where moments are computed conditional on the active velocity at the final time.

Paper summary: Mira: So, looking at the full paper, we have this construction from the equations of motion to solve the Fokker-Planck equation for run-and-tumble particles in a harmonic external field. It's about linking those specific equations of motion to the joint distribution of position and active velocity.

Kai: The authors focus on constructing those moments conditional on being in a specific state at the final time, which they claim is equivalent to the exact solutions of the corresponding Fokker-Planck equations in the steady-state limit.

Lev: It means you can derive these distributions analytically without having to solve the full PDE system directly, but we need to know how this method translates when you move from a simple 1D case to something more complex <ref:2610.24961#pg1>.

Mira: The title suggests they are constructing the solution from the equations of motion, which is a general theoretical framework for integrating those Langevin equations. It applies whether there is or not an external force field present.

Kai: In simpler terms, they’re showing that by looking at the dynamics of how the particle moves—how it tumbles and runs—you can derive the probability distribution for where it ends up, which satisfies the Fokker-Planck equation for its position and velocity.

Lev: So what this means for us in building real quantum hardware is that we have a tool to check if our underlying noise models are leading us to the right steady-state behavior, provided we can handle the complexity of those state transitions correctly.

Mira: The paper establishes the significance of these conditional moments and distributions as a method for calculating them and relating them back to that joint distribution in the Fokker-Planck equation. It’s a new way to approach that relationship.

Conclusion: Kai: So, we’ve been looking at how run-and-tumble particles move in a harmonic field and how they connect that movement to the Fokker-Planck equation, and now we’re coming to the end of this piece on "Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion."

Mira: Yeah, this paper is really focused on taking those basic equations of motion and building a way to get to the actual joint distribution, position and velocity.

Kai: It’s about using these conditional moments—the moments you calculate based on where the particle is at a certain time—to link it directly back to that exact solution of the Fokker-Planck equation in steady state.

Lev: From an error correction standpoint, what this means is we get a way to check if our noisy models, like those for active particles, are actually leading us toward the right steady state behavior.

Mira: Exactly. The authors show how this method works for these run-and-tumble particles with finite tumble time in a harmonic potential and they verify it against the known Fokker-Planck solutions.

Kai: It establishes a solid framework for calculating those conditional moments, which is a big step because we usually just deal with the full distribution, not these specific conditional pieces.

Lev: The paper does mention that while this method works well for linear external force fields, promoting position and velocity into true vectors can be technically tricky when you try to apply it in higher dimensions.

Mira: Right, so the limitation is that it’s analytic results thrive on those linear force fields; if you have really complicated nonlinear forces there, this specific construction gets harder.

Kai: So the big picture here is that we now have a more direct way to get from microscopic dynamics to macroscopic probability distributions for these active systems.

Lev: It sets up a nice comparison point for how we might approach calculating these distributions on real hardware, where we're always fighting those kinds of noise terms.

Mira: And the next thing I want to touch on is how this framework might apply when we move away from steady state and look at transient behavior in these systems.

Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences · Zhejiang Key Laboratory of Soft Matter Biomedical Materials, Wenzhou Institute, University of Chinese Academy of Sciences · Department of Physics and Astronomy, University of Waterloo

cond-mat.stat-mech, cond-mat.soft

Submitted: 2026-10-18

Updated: 2026-11-04

Comments: 13 pages, 2 figures. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in The Journal of Chemical Physics and may be found at https://doi.org/10.1063/5.0350332

Journal ref: A. Sun, F. Ye, and J. Z. Y. Chen, The Journal of Chemical Physics 165, (2026)

DOI: 10.1063/5.0350332

License: http://creativecommons.org/licenses/by-nc-sa/4.0/

Importance score: 79/100

The gist: Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion is a method for integrating Langevin equations to compute…

Key concepts

Langevin Dynamics
This describes how a particle moves under random forces and deterministic forces, such as those from a harmonic potential. The motion is modeled by a generalized Langevin equation that accounts for both thermal noise and external influences, allowing researchers to track the particle's trajectory over time.
Fokker-Planck Equation
This is a partial differential equation used to describe how the probability distribution of particles changes over time due to random motion. The paper uses this equation as a benchmark; their derived conditional distributions are proven to satisfy this exact mathematical description in the steady state.
Conditional Distribution
This refers to the probability distribution of a particle's position given specific conditions on its internal states, such as its active velocity or tumble state. Finding these conditional distributions is key because they relate directly to the overall joint distribution of position and velocity.
Run-and-Tumble Particles (RTPs)
These are particles that alternate between a 'run' phase where they move continuously and a 'tumble' phase where their direction changes randomly. The model incorporates these two distinct behaviors, often in the presence of an external harmonic force field.

Terminology

Summary

Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion is a method for integrating Langevin equations to compute joint distributions, enabling demonstrations of their equivalence to exact solutions of Fokker–Planck equations

Methodology and Framework

The paper introduces a method for integrating the Langevin equations of motion for run-and-tumble particles to compute the joint distribution of their position and active velocity, with and without a harmonic external force field The key step involves constructing the moments of the distribution and correlation functions, conditional on the particles being in a specific state at the final time. This approach builds upon Kac's method but aims to provide a general theoretical framework for joint distributions, extending Kac's original idea. The work focuses on the red route in Fig. p. 1

Where the paper says it

In contrast, we extend Kac’s original idea to deal with active particles based on a stochastic treatment of the Langevin equations. These are two distinct starting points: ours follows the red path in Fig.

1, where moments are computed conditional on the active velocity at the final time. p. 1
Where the paper says it

The main contribution of the present study is the red route. The moments, conditional on the active velocity at the final time, is computed directly from the Langevin equation.

Langevin Dynamics and Moments Calculation

The basic assumption is that the motion of an RTP, possibly in a harmonic potential, is governed by the generalized Langevin equation. The projected Langevin equation for one coordinate component is given by x˙(t) = −bx(t) +F(t,K(t)). p. 2

Where the paper says it

Regardless of the actual dimension of the model, only one coordinate component is considered. The projected Langevin equation for this coordinate component is written as: x˙(t) = −bx(t) +F t,K(t) (2) where b is the strength of the harmonic potential, and can be set to zero for a seamless transition to RTP in free space.

Moments of the time-dependent positional distribution are calculated using the formula derived from Eq. p. 1
Where the paper says it

Alternatively, one may follow the left-hand route by considering individual trajectories following the Langevin equations. Previously, following the idea of Kac, the Langevin equations were used to compute the moments of position, which ultimately lead to the time-dependent positional distribution; in such an approach, information on the active velocity is not retained.

(5), which involves taking an expectation over all realizations of F. p. 2
Where the paper says it

The expectation ⟨. ⟩ is taken over all realizations of F.

To proceed, a case-by-case approach is adopted, applying the law of total expectation to find the correlation function. p. 2
Where the paper says it

To proceed with the general calculation, finding the correlation function ⟨∏k F(tk)⟩ becomes essential. For the RTP model, we adopt a case-by-case approach, evaluating the contribution from each case and then summing over all cases.

Conditional Distributions and Equivalence

Of central interest is the conditional positional distribution p(x,t,A,vt), given the conditions that K(t) = A and F (t) = vt. The results obtained are shown to be equivalent to the exact solutions of the corresponding Fokker–Planck equations in the steady-state limit. p. 1

Where the paper says it

II, the conditional probability distribution functions for RTPs in an external harmonic force field are explicitly calculated and expressed. In the steady-state limit, these results are shown to be equivalent to the exact solutions of the corre-

For 1D RTPs with zero tumble time, the conditional steady-state distributions p±(x) are obtained and verified against coupled Fokker–Planck equations. p. 0
Where the paper says it

For one-dimensional run-and-tumble particles in a harmonic external potential, the exact steady-state distributions for the tumble state, as well as for the run state conditional on a specified velocity direction, are obtained. This enables us to demonstrate their equivalence to the exact solutions of the corresponding Fokker–Planck equations.

Steady-State Results for Finite Tumble Time

For the two-state run-and-tumble model with finite tumble time, exact conditional distributions for all states, R, T, and ± are derived. The exact characteristic function L e(iqx) can be evaluated in two cases based on the potential strength b. p. 5

Where the paper says it

Then, L l (ξ ) = v 2L l−1 (ξ ) γR + (2l −1)b+ξ gl−1 + 1 γR + (2l −2)b+ξ (27) where gl = g RR l . The exact characteristic function L e iqx can be evaluated in two cases.

The steady-state distribution p(x) is related to pR(x) and pT(x) by the relation p(x) = P(R)pR (x)+P(T)pT (x), which is consistent with the law of total probability. p. 5
Where the paper says it

From the exact solution, it is clear that pR (x) = 1 2 (p+ (x) + p− (x)) (30) Furthermore, although not straightforward to verify, the relation p(x) = P(R) pR (x) +P(T) pT (x) (31) holds, where P(R) and P(T) denote P(K(t) = R) and P(K(t) = T), respectively, for any t > 0. These relations are consistent with the law of total probability.

Significance and Scope

The work establishes the significance of conditional moments and distributions to find a method for calculating them and relating them to the joint distribution in the Fokker–Planck equation. The general method developed here is applicable to higher spatial dimensions, although technical hurdles exist when promoting position and active velocity into vectors. p. 6

Where the paper says it

In principle, the general method developed here is applicable to higher spatial dimensions, where the moments of the conditional distribution functions are systematically deduced. There are, on the other hand, additional technical hurdles that need to be overcome in the diagram expansion, when the position and active velocity are promoted into vectors, which ultimately requires the construction of a vector-and-tensor theory for an equation for equations such as (5).

The method's reliance on the linearity of external force fields provides the strength for yielding analytic results.

Appendix Details

Appendix A details the calculation of the correlation function, where contributions from individual segments are calculated using factors like v 2 A M k/d M k/d. Appendix B provides a detailed derivation of conditional moments, including recursive relations and diagrammatic rules for computing the conditional l-th order moments. p. 4

Where the paper says it

The left-hand side can be obtained. The derivation, along with the resulting diagrammatic rules and recursive relations, is presented in Appendix B 2.

Appendix C presents the exact steady-state direction-dependent conditional positional distributions for 1D RTP with finite tumble time in a harmonic potential. p. 0
Where the paper says it

The key step is the construction of the moments of the distribution and the correlation functions, conditional on the particles being in a specific state at the final time. For one-dimensional run-and-tumble particles in a harmonic external potential, the exact steady-state distributions for the tumble state, as well as for the run state conditional on a specified velocity direction, are obtained.

The final results are shown to be equivalent to the solution of the Fokker–Planck equation. p. 6
Where the paper says it

The resulting conditional positional distributions are shown to be equivalent to the joint distribution of position and velocity, that satisfies the Fokker-Planck equation. With this improvement in methodology, we not only rigorously confirm our previous results in46 agrees with the FokkerPlanck equation, but also obtain more insights of this problem.

Summary and Discussion

The paper analytically obtains conditional moments of positional distribution of RTPs with time dependence. The resulting conditional positional distributions are shown to be equivalent to the joint distribution of position and velocity, that satisfies the Fokker-Planck equation. p. 6

Where the paper says it

The starting point is solving the Langevin dynamics, following some of the basic ideas developed by Kac long ago. The resulting conditional positional distributions are shown to be equivalent to the joint distribution of position and velocity, that satisfies the Fokker-Planck equation.

For the steady state of the 1D RTP model with finite tumble time, singular peaks in the distribution function at x = −1,0,1 results from particles in −, T, + states, respectively. p. 6
Where the paper says it

With this improvement in methodology, we not only rigorously confirm our previous results in46 agrees with the FokkerPlanck equation, but also obtain more insights of this problem. For the steady state of the 1D RTP model with finite tumble time, as intuitively expected, the singular peaks in the distribution function at x = −1,0,1, results from the particles in −, T, + states, respectively.

The derivative of the conditional distribution p± diverges at x = 0 for γT < 1 causing a dramatic change of conditional distribution density at the center. p. 6
Where the paper says it

For the steady state of the 1D RTP model with finite tumble time, as intuitively expected, the singular peaks in the distribution function at x = −1,0,1, results from the particles in −, T, + states, respectively. The derivative of the conditional distribution p± diverges at x = 0 for γT < 1, causing a dramatic change of conditional distribution density at the center.

While the physical model is the focus, it also establishes a probabilistic solution to a PDE system by finding a probability distribution that satisfies an unsolved Fokker-Planck equation. p. 6
Where the paper says it

While the physical model of active particles is the focus here, we may also take out all the physical context, and view our treatment from a purely mathematical angle. By finding a probability distribution that satisfies a previously unsolved Fokker-Planck equation, we in fact establish a probabilistic solution to a PDE system.

The importance of the conditional distribution is demonstrated for the first time. p. 6
Where the paper says it

While it is common to study stochastic processes by solving the corresponding FokkerPlanck equation, this opposite direction is much less studied beyond Monte Carlo sampling. Furthermore, for the first time, the importance of the conditional distribution is demonstrated.

Acknowledgments and Data

The authors are indebted to Dr. Rudolf Podgornik for his earlier participation in the project. p. 7

Where the paper says it

ACKNOWLEDGMENTS We are indebted to Dr. Rudolf Podgornik for his earlier participation in the project.

This work was financially supported by the National Key Research and Development Program of China (2022YFA1405002), the National Natural Science Foundation of China (Grant No. p. 7
Where the paper says it

He will be sorely missed. This work was financially supported by the National Key Research and Development Program of China (2022YFA1405002), the National Natural Science Foundation of China (Grant No.

12325405 & T2221001), and the Zhejiang Key Laboratory of Soft Matter Biomedical Materials (2025ZY01036 and 2025E10072). p. 7
Where the paper says it

This work was financially supported by the National Key Research and Development Program of China (2022YFA1405002), the National Natural Science Foundation of China (Grant No. 12325405 & T2221001), and the Zhejiang Key Laboratory of Soft Matter Biomedical Materials (2025ZY01036 and 2025E10072).

Data sharing is not applicable to this article as no new data were created or analyzed in this study. p. 7
Where the paper says it

12325405 & T2221001), and the Zhejiang Key Laboratory of Soft Matter Biomedical Materials (2025ZY01036 and 2025E10072). DATA AVAILABILITY STATEMENT Data sharing is not applicable to this article as no new data were created or analyzed in this study.

The authors have no conflicts to disclose. p. 7
Where the paper says it

DATA AVAILABILITY STATEMENT Data sharing is not applicable to this article as no new data were created or analyzed in this study. AUTHOR DECLARATIONS Conflict of Interest The authors have no conflicts to disclose.

References

The paper cites numerous works related to active matter, including studies on molecular motors, active gels, and run-and-tumble particles. Key references include those by Sun et al. p. 0

Where the paper says it

Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion Aoran Sun,1, 2 Fangfu Ye,1, 2 and Jeff Z. Chen2, 3 1)Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China 2)Zhejiang Key Laboratory of Soft Matter Biomedical Materials, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang 325000, China 3)Department of Physics and Astronomy, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada (*Electronic mail: Corresponding author.

p. 0
Where the paper says it

Run-and-tumble particles in a harmonic external field: constructing the solution of the Fokker-Planck equation from the equations of motion Aoran Sun,1, 2 Fangfu Ye,1, 2 and Jeff Z. Chen2, 3 1)Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China 2)Zhejiang Key Laboratory of Soft Matter Biomedical Materials, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang 325000, China 3)Department of Physics and Astronomy, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada (*Electronic mail: Corresponding author.

, Frydel, and others concerning exact stationary states in harmonic potentials. p. 6
Where the paper says it

We therefore restrict ourselves to a complete 1D theory in this paper, avoiding a discussion of 2D and 3D cases that would end inconclusively. The method itself, which has the same mathematical starting point as the Kac method for solving the Langevin equation, depends on the linearity of the external force fields (harmonic potentials), which has the strength of yielding analytic

p. 6
Where the paper says it

We therefore restrict ourselves to a complete 1D theory in this paper, avoiding a discussion of 2D and 3D cases that would end inconclusively. The method itself, which has the same mathematical starting point as the Kac method for solving the Langevin equation, depends on the linearity of the external force fields (harmonic potentials), which has the strength of yielding analytic

The references also cover the theoretical frameworks of Fokker–Planck equations and Langevin equations used in active particle dynamics. p. 0
Where the paper says it

The steady-state distribution function of an ABP in an external field is harder to find and is only expressed in terms of series expansions43,44; the moments of this function have been expressed recursively as well39 . Two commonly used theoretical frameworks for understanding the dynamics are the Fokker-Planck equations and arXiv:2610.

p. 0
Where the paper says it

The steady-state distribution function of an ABP in an external field is harder to find and is only expressed in terms of series expansions43,44; the moments of this function have been expressed recursively as well39 . Two commonly used theoretical frameworks for understanding the dynamics are the Fokker-Planck equations and arXiv:2610.

The paper includes specific citations for various models like the active Brownian particle and run-and-tumble particles. p. 0
Where the paper says it

The behavior of a single active particle in free space can be non-trivial or even counterintuitive. Two types of minimal models are often used: the active Brownian particle (ABP) and the run-and-tumble particle (RTP).

Key references are listed in the bibliography at the end of the document. p. 5
Where the paper says it

The characteristic function e iqx is then obtained, in units where v = 1, to be: L e iqx|±(ξ ) = (γR +γT +ξ )(γR ±iq+ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (28) L e iqx|T (ξ ) = ξ 2 + (γR +ξ )(γR +γT +ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (29) Another case where the exact characteristic function can be obtained is the steady state, where only L(0) is needed. After performing the inverse Fourier transform, the distribution can be obtained; the explicit expressions are listed in Appendix C, in which the appearance of the singular peaks in the positional distribution is carefully dissected.

p. 5
Where the paper says it

The characteristic function e iqx is then obtained, in units where v = 1, to be: L e iqx|±(ξ ) = (γR +γT +ξ )(γR ±iq+ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (28) L e iqx|T (ξ ) = ξ 2 + (γR +ξ )(γR +γT +ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (29) Another case where the exact characteristic function can be obtained is the steady state, where only L(0) is needed. After performing the inverse Fourier transform, the distribution can be obtained; the explicit expressions are listed in Appendix C, in which the appearance of the singular peaks in the positional distribution is carefully dissected.

Appendix A Details

Appendix A details how to calculate the correlation function, where contributions from individual segments are calculated using factors like v 2 A M k/d M k/d. For odd number of vertices, the contribution is zero due to left-right symmetry. p. 7

Where the paper says it

(A1) the Γ is the gamma function. Segments passing through an odd number of vertices contribute a factor of zero to the contribution of the diagram, due to the left-right symmetry of the projected problem in the choice of F at the beginning of the R state.

p. 7
Where the paper says it

(A1) the Γ is the gamma function. Segments passing through an odd number of vertices contribute a factor of zero to the contribution of the diagram, due to the left-right symmetry of the projected problem in the choice of F at the beginning of the R state.

The probability P(diag) is calculated by applying the Markov property to individual events. p. 7
Where the paper says it

Each event accounts the presence or absence of state changes between tk and tk+1 for all k. Afterward the Markov property is applied, to multiply the probabilities of all these individual events together, obtaining the probability of this case P(diag).

p. 7
Where the paper says it

Each event accounts the presence or absence of state changes between tk and tk+1 for all k. Afterward the Markov property is applied, to multiply the probabilities of all these individual events together, obtaining the probability of this case P(diag).

p. 7
Where the paper says it

Each event accounts the presence or absence of state changes between tk and tk+1 for all k. Afterward the Markov property is applied, to multiply the probabilities of all these individual events together, obtaining the probability of this case P(diag).

Appendix B Details

Appendix B provides a detailed derivation of conditional moments, including recursive relations and diagrammatic rules for computing the conditional l-th order moments. It shows how the additional condition F(t) = vt modifies the contribution from the leftmost segment. p. 9

Where the paper says it

For the conditional expectation, ⟨∏k F (tk)|dB,A,vt⟩, if t is not connected to tℓ (i. , if the leftmost segment does not pass through t), then the additional condition F(t) = vt has no effect on events prior to tℓ .

p. 9
Where the paper says it

For the conditional expectation, ⟨∏k F (tk)|dB,A,vt⟩, if t is not connected to tℓ (i. , if the leftmost segment does not pass through t), then the additional condition F(t) = vt has no effect on events prior to tℓ .

Appendix C Details

Appendix C presents the exact steady-state direction-dependent conditional positional distributions for 1D RTP with finite tumble time in a harmonic potential. The explicit expressions for the R state distribution are given in Eq. p. 5

Where the paper says it

The characteristic function e iqx is then obtained, in units where v = 1, to be: L e iqx|±(ξ ) = (γR +γT +ξ )(γR ±iq+ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (28) L e iqx|T (ξ ) = ξ 2 + (γR +ξ )(γR +γT +ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (29) Another case where the exact characteristic function can be obtained is the steady state, where only L(0) is needed. After performing the inverse Fourier transform, the distribution can be obtained; the explicit expressions are listed in Appendix C, in which the appearance of the singular peaks in the positional distribution is carefully dissected.

(C2) and p(x) is given by Eq. p. 0
Where the paper says it

For a free single RTP in the absence of an external field, the time evolution of the probability density function of position has been analytically studied using Laplace transformation in time and Fourier transformation in space24. A key property for the RTP is the first-passage time, the time an RTP takes to reach a target position for the first time, given its first position.

(C3). The functions exhibit mathematical singularities, consistent with physical intuition regarding the tumble state at the origin. p. 6
Where the paper says it

This interesting features could not been studied with only the positional distribution. While the physical model of active particles is the focus here, we may also take out all the physical context, and view our treatment from a purely mathematical angle.

Appendix B Details (Conditional Moments)

The calculation of conditional moments involves two steps: first, conditional on K(t) = A without specifying F(t), and then specializing to F(t) = vt. The final recursive relation for even moments is given in Eq. p. 3

Where the paper says it

The following recursive relation is concluded, L l B (ξ ) = l−1 ∑ k=0 2l−1 ∏m=2k+1 v 2(l−k) B Ml−k d γB +mb+ξ ∑ B g BA k L k A (ξ ), (11) where the initial condition is g BA 0 = δBA and L 0 B = P(B). The factor Ml d , with d denoting the spatial dimension, arises from the moments of the active velocity and is given by Mk d = Γ(1/2+k)Γ(d/2) √ πΓ(d/2+k) (12) where Γ is the gamma function.

(B9) and for odd moments in Eq. p. 4
Where the paper says it

As a result, x(t) l | A, vt becomes non-trivial for both even and odd l. The main purpose of this work is to establish the significance of the conditional moments and distributions, to find a method for calculating, and to relate the results to the joint distribution in the Fokker–Planck equation.

(B10).

Appendix B Details (Conditional Moments with F(t)=vt)

For the conditional expectation, if t is not connected to tl, the additional condition F(t) = vt has no effect on events prior to tl. The calculation proceeds similarly unless the leftmost segment passes through t and an odd number of additional vertices. p. 9

Where the paper says it

Otherwise, the calculation proceeds in a manner very similar to the unconditional case. The only difference arises with the leftmost segment: if it passes through the vertex at time t and additional k vertices: it contributes a factor v k t instead of M k/2 d , since the active velocity is now fixed by condition, rather than randomly sampled.

Appendix C Details (Steady-State Distributions)

The exact steady-state directional conditional distributions are obtained in Section IV. The parameters γT and γR are the transition rates of the tumble and run states, respectively. p. 5

Where the paper says it

6 steady state where the lifetimes of the states R and T are exponentially distributed with rates γR and γT , respectively. The positional distribution was the focus of study in Ref.

The functions pR (x) and p is given by Eq. p. 1
Where the paper says it

, run or tumble) and having its active velocity pointing in a given direction—directly from the Langevin equation. This is done by computing the conditional correlation functions, integrating them to obtain the conditional moments, and finally reconstructing the conditional distributions from these moments.

(C5) and Eq. (C3). The singular behavior at the origin for γT < 1 is consistent with physical intuition regarding the tumble state. p. 6
Where the paper says it

The velocity-dependent distributions p+ and p− appearing in (30) are shown in purple and green. For γT < 1, a singular peak at the center arises from the tumble state, accompanied by a pronounced change in p± near the center.

Appendix C Details (Boundary Behavior)

At the boundary x = 1, a sufficient condition for finiteness of 2F1 (a,b;c;1) is c > a+b. For pR, p±, and p, it becomes γR > 1. p. 5

Where the paper says it

First, when b = 0, the ratio L l (ξ )/L l−1 (ξ ) becomes independent of l, and therefore L l (ξ ) can be obtained explicitly. The characteristic function e iqx is then obtained, in units where v = 1, to be: L e iqx|±(ξ ) = (γR +γT +ξ )(γR ±iq+ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (28) L e iqx|T (ξ ) = ξ 2 + (γR +ξ )(γR +γT +ξ ) γT (ξ (γR +ξ ) +q 2) +ξ ((γR +ξ ) 2 +q 2) (29) Another case where the exact characteristic function can be obtained is the steady state, where only L(0) is needed.

In this case, all densities vanish at the boundary x = 1 (C6). p. 5
Where the paper says it

An interesting observation is when γT is large and γR is small, a particle in the T state is more likely to be found midway between 0 < x < 1 and −1 < x < 0. The explanation is that, for small γR, the preceding R phase is typically long, so that the particle is likely to be located near a boundary when the tumble begins.

The singular behavior near the boundary for γR < 1 arises entirely from the run state, where p+(1) diverges and provides the leading contribution to the singularity at x = 1. p. 6
Where the paper says it

For γT < 1, a singular peak at the center arises from the tumble state, accompanied by a pronounced change in p± near the center. When γR < 1, the peaks at the boundaries originate from particles in the corresponding run states.

Appendix C Details (Fokker-Planck Verification)

The analytic solutions of p±(x) and pT(x) are related to the steady state solutions of the Fokker-Planck equation. These relations are verified by direct substitution showing that f± = P(±)p+ for the R state satisfies the three above Fokker–Planck equations. p. 5

Where the paper says it

The factors P(±) and P(T) are now vital for constructing the solution, as P(±) are generally not the same as P(T). It can be rigorously verified by direct substitution that f± = P(±)p+ for the R state, fT = P(T)pT for the T state satisfy the three above Fokker–Planck equations exact

The solutions are obtained without assuming a priori that a steady state exists, instead taking the limit t → ∞. p. 4
Where the paper says it

Furthermore, this solution is obtained without assuming a priori that a steady state exists. Instead, the steady state is obtained by taking the limit t → ∞.

Appendix C Details (Final Note)

The construction of the solution can be replaced by f± = Cp± where C is a constant determined by normalization. The total distribution is f = (p+ + p−)/2. p. 1

Where the paper says it

The second term in the square brackets is the velocity-averaged f over the velocity domain Ω. In continuous active velocity distribution, Ω is the complete solid angle, and in discontinuous distribution where the integral itself is rewritten as a sum, Ω is the total number of directions.

This result, f = P(+)p+ + P(−)p−, can be recomposited as the left and right overall probabilities in the R state are equivalent. p. 4
Where the paper says it

This constant C should be determined by the normalization of the total probability distribution function f = f+ + f−, R ∞ −∞ f (x)dx = 1; hence, C = 1/2, as each of p± itself is already normalized. This result, f = (p+ + p−)/2, can be recomposited as f = P(+)p+ + P(−)p−, as the left and right overall probabilities in the R state are equivalent, P(±) = 1/2.

Appendix A Details (Correlation Function)

The conditional expectation is broken down to the product of expectation on each segments, on which F is the same. Segments passing through an odd number of vertices contribute a factor of zero due to left-right symmetry. p. 7

Where the paper says it

(A1) the Γ is the gamma function. Segments passing through an odd number of vertices contribute a factor of zero to the contribution of the diagram, due to the left-right symmetry of the projected problem in the choice of F at the beginning of the R state.

The probability P(diag) is calculated by applying the Markov property to individual events.

The paper cites numerous works related to active matter, including studies on molecular motors, active gels, and run-and-tumble particles. Key references include those by Sun et al., Frydel, and others concerning exact stationary states in harmonic potentials. The references also cover the theoretical frameworks of Fokker–Planck equations and Langevin equations used in active particle dynamics. Key references are listed in the bibliography at the end of the document.

Appendix A details how to calculate the correlation function, where contributions from individual segments are calculated using factors like v 2 A M k/d M k/d. For odd number of vertices, the contribution is zero due to left-right symmetry. The probability P(diag) is calculated by applying the Markov property to individual events.

Appendix B provides a detailed derivation of conditional moments, including recursive relations and diagrammatic rules for computing the conditional l-th order moments. It shows how the additional condition F(t) = vt modifies the contribution from the leftmost segment.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Vectorized Langevin Integration for Active Matter Simulation: The system can simulate run-and-tumble particles in harmonic external fields by directly integrating their Langevin equations using a method that computes conditional correlation functions from the red route described in Section II. This allows for the computation of joint distributions of position and active velocity, which is crucial for modeling complex active matter dynamics.

  2. Exact Steady State Prediction for Trapping Systems: The improved system can analytically determine the exact steady-state positional distribution function p(x) for a one-dimensional run-and-tumble particle in a harmonic potential, as shown in Appendix C. This allows researchers to predict the final configuration of particles trapped by optical or acoustic tweezers without relying on time evolution simulations.

  3. Conditional Distribution Analysis for State Identification: The system can calculate conditional positional distributions like p(x, t, A, vt), which represent the distribution of particles in a specific state A with a given active velocity vt at time t. This capability allows AI to infer the internal state (run or tumble) of an active particle based on its spatial position and velocity information.

  4. Verification Against Fokker-Planck Models: The system can verify that its derived conditional distributions are equivalent to the exact solutions of corresponding Fokker-Planck equations, a key goal stated in Section V. This provides a rigorous mathematical justification that the Langevin treatment correctly models the underlying non-equilibrium statistics of active particles.

Abstract

A method for integrating the Langevin equations of motion for run-and-tumble particles is introduced to compute the joint distribution of their position and active velocity, with and without a harmonic external force field. The key step is the construction of the moments of the distribution and the correlation functions, conditional on the particles being in a specific state at the final time. For one-dimensional run-and-tumble particles in a harmonic external potential, the exact steady-state distributions for the tumble state, as well as for the run state conditional on a specified velocity direction, are obtained. This enables us to demonstrate their equivalence to the exact solutions of the corresponding Fokker-Planck equations.

Sources

Related papers