Quotients of Calabi-Yau Generalized Fermat manifolds and Log Enriques varieties

arXiv:2610.21752 · math.AG · Submitted 2026-10-15 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Mathematics. The day in mathematics: new theorems, new proofs, and what they open.

Ada: I'm Ada.

Emmy: And I'm Emmy, here with Kolya.

Ada: We're looking at the paper: "Quotients of Calabi-Yau Generalized Fermat manifolds and Log Enriques varieties".

Emmy: Here's the gist of the paper. Enriques manifolds and Log Enriques varieties have attracted a lot of interest in the last years This paper studies Enriques manifolds and Log Enriques varieties that are respectively etale ´ and quasi-etale quotients of Calabi–Yau manifolds The paper investigates Enriques manifolds and Log Enriques varieties by studying their construction as etale or quasi-etale quotients of Calabi–Yau manifolds, specifically by examining quotients of generalized Fermat manifolds (GFM) The main result provides a complete description of these quotients under certain assumptions, categorized into five cases based on the dimension and degree parameters Classification of Quotient Types The main theorem classifies the quotients based on the dimension d and automorphism order k ((i) If d = 2 and k = 4, then n = 3 and M43/⟨φ⟩ is a Log Enriques surface of index two with canonical singularities, whose minimal resolution is an Enriques surface ((ii) If d is even and k = 2, then M2n/⟨φ⟩ is an Enriques manifold of index two, that is a special member in the family described in Example 4.10 ((iii) If d ≥ 4 is even and k ≠ 2, then Mk n/⟨φ⟩ is a Log Enriques variety of index two with terminal singularities ((iv) If d is odd and k is a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau manifold ((v) If d is odd and k is not a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau variety with terminal singularities Analysis of Automorphisms and Singularities The paper details the properties of automorphisms with empty fixed locus, showing that for Calabi–Yau GFM of type (d; k, n), the automorphism has order k (i) If d is even and k = 2, then M/⟨φ⟩ is an Enriques manifold of index two (ii) If d is odd and k is a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau manifold The classification of quotient singularities relies on the set S of divisors of k, and shows that for non-prime k, the quotients have terminal singularities unless (d, k) = (2, 4) Comparison of Enriques Families The paper proves that two families of Enriques manifolds constructed in

OS11, Theorem 3.1: and

BCS26, 6.1.5: are not deformation equivalent by computing their second Betti numbers This is established by showing that the Betti numbers are different and equal to 1 and 11 respectively Deformation Space Dimensions The deformation spaces of the examples of Enriques manifolds are computed, yielding dimensions of 10 for E

n: and (2n − 1)(2n + 1)2 + 1 for X' This shows that the dimension of the moduli space is independent on n in the first case and dependent in the second case The smoothness of the quotients M/⟨φ⟩ is determined by whether k is prime or not, concluding that if k is prime, the morphism is etale, and if k is not prime, it is quasi-etale Furthermore, for odd dimension d, M/⟨φ⟩ is smooth if and only if k is a prime number Final Classification The final result states that for every 1 ≤ s ≤ k − 1 we have ⟨φs⟩ = ⟨φgcd(s,k)⟩ with gcd(s, k) = 1 or gcd(s, k) ∈ S This implies that M/⟨φs⟩ equals either M/⟨φ⟩ or M/⟨φγ⟩ for some γ ∈ S The singularity of M/⟨φs⟩ at π(q) coincides with that of A d−vγ /⟨φγ⟩ at the origin, which is terminal by the above computations and by Theorem 5.

Title and authors: Ada: So let's talk about the title and who wrote this. The paper is "Quotients of Calabi-Yau Generalized Fermat manifolds and Log Enriques varieties," written by Simone Billi, Ana Julisa Palomino, and Alessandra Sartri. It immediately tells us the focus is on these specific quotients connecting Calabi-Yau manifolds to Enriques or Log Enriques varieties.

Emmy: The authors are bringing together ideas from different areas because they're looking at how the Beauville–Bogomolov decomposition theorem, which breaks down complex manifolds, extends into the singular setting with things like Horing and Peternell’s work.

Kolya: From my perspective as someone who looks at probabilistic bounds, I see this as a way to create specific geometric families—like Enriques manifolds—that can be studied more rigorously than just looking at the smooth versions.

The paper's summary: Ada: In the summary, they explain that they produce several examples by studying quotients of GFM that are Calabi-Yau type. They describe all these quotients using a fixed point free automorphism and find that most of them end up being Log Enriques varieties or Calabi-Yau varieties with terminal singularities.

Emmy: They give us a classification based on the dimension d and the automorphism order k, which is pretty structured—they break it down into five distinct cases depending on those parameters.

Kolya: This classification tells us exactly what kind of geometry we can expect when we take these quotients, like knowing if it's going to be an Enriques manifold or something else entirely.

The paper's improvements: Ada: The paper points out several ways they’ve improved the understanding of these quotients. They mention using a specific set S of divisors related to k to classify the quotient singularities, which helps determine if they are terminal or canonical, even when k isn't prime.

Emmy: They also use Theorem five and Theorem ten to predict the nature of the quotient variety based on d and k. For example, you can predict if it's a Log Enriques variety or a Calabi-Yau manifold just by looking at those initial parameters.

Kolya: And they’ve gotten better at distinguishing different families of Enriques manifolds by comparing their Betti numbers, which shows they aren't deformation equivalent if the numbers are different, like comparing one and eleven in one case.

Conclusion: Ada: So wrapping up, the main point is that we get a complete description of these quotients based on the dimension and automorphism order. They show that for odd dimension d, smoothness really depends on whether k is prime or not, concluding that if k is prime, the quotient morphism is etale.

Emmy: They also showed that two families of Enriques manifolds they constructed are not deformation equivalent because their second Betti numbers are different and equal to one and eleven respectively. This gives us a solid tool for distinguishing between complex families.

Kolya: I think the part about how the singularity at a point relates to another structure, specifically at the origin of an A d over k gamma, helps pin down exactly what kind of singularity we have when we look at things like M over the subgroup sigma.

Ada: To sum up on "Quotients of Calabi-Yau Generalized Fermat manifolds and Log Enriques varieties," this paper gives us a complete classification for these quotients, detailing the five cases based on dimension and order. It shows how these constructions connect different families of geometric spaces.

Emmy: We see that the structure of these spaces is deeply tied to the properties of the underlying Calabi-Yau manifold and how it gets quotiented. This paper provides a framework for studying singular versions of Enriques manifolds, which are really important because they are often more complex than their smooth counterparts.

Kolya: It’s interesting how the work builds on previous results by using those theorems to make predictions about the singularities and the topology of these resulting spaces.

Ada: That's what we have for this paper today. We'll be looking at how these quotients fit into the broader landscape of algebraic geometry next time.

University of Temuco · University of Poitiers

math.AG

Submitted: 2026-10-15

Updated: 2026-11-05

Comments: 28 pages. Minor changes. Comments are welcome!

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 66/100

The gist: Enriques manifolds and Log Enriques varieties have attracted a lot of interest in the last years This paper studies Enriques manifolds and Log Enriques varieties that are respectively etale ´ and…

Key concepts

Enriques Manifolds
These are specific complex surfaces that arise as quotients of higher-dimensional Calabi–Yau manifolds. The paper focuses on classifying these surfaces based on how they are formed from generalized Fermat manifolds under certain conditions related to dimension and automorphism order.
Log Enriques Varieties
These are a class of varieties that arise as quasi-etale quotients of Calabi–Yau manifolds. The study characterizes them, showing that their nature (e.g., index two) depends heavily on the dimension and the order of the automorphism used to create them.
Quotient Singularities
This refers to the singularities that appear when a manifold is divided by an automorphism group ($\langle\phi\rangle$). The paper analyzes these singularities, determining if they are terminal or canonical based on properties like the age alpha j, which helps precisely describe the local geometry near singular points.
Deformation Space Dimension
This measures how many independent ways a geometric object can be slightly deformed while remaining within its family. The paper computes these dimensions for Enriques manifolds, showing that this dimension depends on whether the construction involves an even or odd dimension.

Terminology

Summary

Enriques manifolds and Log Enriques varieties have attracted a lot of interest in the last years This paper studies Enriques manifolds and Log Enriques varieties that are respectively etale ´ and quasi-etale quotients of Calabi–Yau manifolds

Introduction to the Study

The paper investigates Enriques manifolds and Log Enriques varieties by studying their construction as etale or quasi-etale quotients of Calabi–Yau manifolds, specifically by examining quotients of generalized Fermat manifolds (GFM) The main result provides a complete description of these quotients under certain assumptions, categorized into five cases based on the dimension and degree parameters

Classification of Quotient Types

The main theorem classifies the quotients based on the dimension d and automorphism order k

**((i) If d = 2 and k = 4, then n = 3 and M43/⟨φ⟩ is a Log Enriques surface of index two with canonical singularities, whose minimal resolution is an Enriques surface **

**((ii) If d is even and k = 2, then M2n/⟨φ⟩ is an Enriques manifold of index two, that is a special member in the family described in Example 4.10 **

**((iii) If d ≥ 4 is even and k ≠ 2, then Mk n/⟨φ⟩ is a Log Enriques variety of index two with terminal singularities **

**((iv) If d is odd and k is a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau manifold **

**((v) If d is odd and k is not a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau variety with terminal singularities **

Analysis of Automorphisms and Singularities

The paper details the properties of automorphisms with empty fixed locus, showing that for Calabi–Yau GFM of type (d; k, n), the automorphism has order k

**(i) If d is even and k = 2, then M/⟨φ⟩ is an Enriques manifold of index two **

**(ii) If d is odd and k is a prime number, then Mk n/⟨φ⟩ is a Calabi–Yau manifold **

The classification of quotient singularities relies on the set S of divisors of k, and shows that for non-prime k, the quotients have terminal singularities unless (d, k) = (2, 4)

Comparison of Enriques Families

The paper proves that two families of Enriques manifolds constructed in [OS11, Theorem 3.1] and [BCS26, 6. p. 0

Where the paper says it

Moreover, by [Nik79], a K3 surface with a non-symplectic involution is projective so that all Enriques surfaces are projective. The notion of Enriques surface was generalized in higher dimension independently by [OS11] and [BNWS11], we will follow the more recent and more general definition of [BCS26]: an Enriques manifold is a complex projective manifold E with torsion but non-trivial canonical divisor and zero irregularity.

1.5] are not deformation equivalent by computing their second Betti numbers This is established by showing that the Betti numbers are different and equal to 1 and 11 respectively

Deformation Space Dimensions

The deformation spaces of the examples of Enriques manifolds are computed, yielding dimensions of 10 for E[n] and (2n − 1)(2n + 1)2 + 1 for X' This shows that the dimension of the moduli space is independent on n in the first case and dependent in the second case

Conclusion on Smoothness

The smoothness of the quotients M/⟨φ⟩ is determined by whether k is prime or not, concluding that if k is prime, the morphism is etale, and if k is not prime, it is quasi-etale Furthermore, for odd dimension d, M/⟨φ⟩ is smooth if and only if k is a prime number

Final Classification

The final result states that for every 1 ≤ s ≤ k − 1 we have ⟨φs⟩ = ⟨φgcd(s,k)⟩ with gcd(s, k) = 1 or gcd(s, k) ∈ S This implies that M/⟨φs⟩ equals either M/⟨φ⟩ or M/⟨φγ⟩ for some γ ∈ S The singularity of M/⟨φs⟩ at π(q) coincides with that of A d−vγ /⟨φγ⟩ at the origin, which is terminal by the above computations and by Theorem 5.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved ability to classify quotient singularities by using Theorem 5.7 to determine if a normal quotient singularity is terminal or canonical based on a computation involving age alpha j. This allows for precise characterization of the singularities of M/phi and M/phi s in terms of their type, even when k is not prime.

  2. Enhanced capability to predict the nature of the quotient variety M/phi based on the dimension d and automorphism order k using Theorem 5.10, which explicitly states conditions for Log Enriques varieties or Calabi-Yau manifolds for specific cases like d=2, k=4 or d is odd and k is prime.

  3. Stronger ability to distinguish between different families of Enriques manifolds by comparing their Betti numbers as shown in Corollary 6.7, allowing the system to confirm if two constructed examples are deformation equivalent or not based on topological invariants.

  4. Increased precision in determining the dimension of deformation spaces by using Lemma 6.13, which provides explicit dimensions for the moduli spaces of E[n] and X', allowing for accurate calculation of complex parameters in geometric deformation theory.

  5. Improved capacity to analyze the structure of fixed point loci F(H) using Proposition 3.5, enabling the system to calculate the number of connected components c l based on whether the order s divides n minus d plus one and whether it equals n minus d plus one.

  6. Enhanced capability in analyzing local geometry near singular points by using Lemma 5.4, which states that M/⟨φ⟩ is locally isomorphic near pi(q) to A d/⟨φs⟩ at the origin, allowing for the application of local singularity models for detailed analysis of quotient structures.

Abstract

Enriques manifolds and Log Enriques varieties have attracted a lot of interest in the last years. In this paper we study Enriques manifolds and Log Enriques varieties that are respectively étale and quasi-étale quotients of Calabi-Yau manifolds. We produce several examples by studying quotients of generalized Fermat manifolds of Calabi-Yau type. These are complete intersections of Fermat type manifolds all of the same degree and were described recently by Hidalgo, Hughes and Leyton-Álvarez. We describe all their quotients by a fixed-point-free automorphism. Most of the quotients are Log Enriques varieties or Calabi-Yau varieties with terminal singularities. In one case we get a family of Enriques manifolds which is a subfamily of a family described previously by Boissière, Camere and the third author, which is one of the two so far known families of Enriques manifolds of Calabi-Yau type. This family is obtained as an étale quotient of order two of a Calabi-Yau manifold complete intersection of quadrics, the other family is the Hilbert scheme of n points on an Enriques surface. In the last part of the paper we show that these two families are different by computing their second Betti numbers, which are equal to one and eleven respectively.

Sources

Related papers