Evolution Toward Sensing-Enabled RAN: Practical Bistatic Sensing via Uplink

arXiv:2610.20923 · eess.SP · Submitted 2026-10-14 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Evolution Toward Sensing-Enabled RAN".

Dev: Here's the gist of the paper. This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks.

Rosa: The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components.

Dev: Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas.

Rosa: Uplink CSI-Based Sensing Fundamentals The paper explores uplink channel state information (CSI)-based sensing as a practical near-term route to enabling sensingenabled networks by reusing known pilot signals.

Paper summary: Rosa: Looking at the whole paper, the authors are essentially showing that uplink CSI estimates can enable bistatic sensing in evolved 5G FR1 networks by only making minimum required modifications to the infrastructure <ref:2610.20923#pg1,minimum required modifications to the infrastructure>. This isn't some futuristic concept; it's something they have validated through simulation and real measurements using an NVIDIA Aerial open-source gNB implementation.

Dev: The key is that they manage to use the 5G UE positioning function alongside the gNB antenna array for both absolute range and angle of arrival estimation, which is what makes this bistatic sensing possible <ref:2610.20923#pg1>. It moves the sensing capability from just detecting things to actually localizing them over local areas.

Taro: So, for someone just listening in, what's the big picture here? Does this mean we can start seeing movement detected by cell towers without installing entirely new radar equipment everywhere?

Rosa: It suggests that because of how the 5G system is already set up with these uplink signals, we can start enabling sensing applications simply by processing those channel estimates in a specific way <ref:2610.20923#pg1>. It opens up possibilities for things like security or environmental monitoring where knowing what's moving nearby is important.

Dev: The implication is that the effort needed to get this kind of sensing capability isn't as high as you might think, because they are showing how to do it with existing components and just a few processing tweaks. The feasibility was confirmed by detecting moving targets walking towards the radio unit within about zero point five to one meter distance in their experiments.

Taro: So it's a way to add a sensing dimension onto cellular communication without needing huge new hardware deployments right away, just by exploiting the channel information they already collect.

Rosa: Exactly, and that's what the paper about "Evolution Toward Sensing-Enabled RAN: Practical Bistatic Sensing via Uplink" is about—it shows how to make this happen in a practical way for modern 5G networks <ref:2610.20923#pg1,Evolution Toward Sensing-Enabled RAN: Practical Bistatic Sensing via Uplink>.

Conclusion: Rosa: So this paper is talking about how we can actually get sensing working in 5G networks by using the information they already collect from the uplink channel, which is what this "Evolution Toward Sensing-Enabled RAN" is all about <ref:2610.20923#pg1,Evolution Toward Sensing-Enabled RAN>.

Dev: Yeah, it's not about building some giant new radar system; it's leveraging what you already have on the airwaves to detect things. The authors are focusing on making bistatic sensing practical right now.

Taro: So, if I understand this right, they aren't proposing a total overhaul of the network architecture to add sensing capabilities; they’re looking at how to add it with just a few changes.

Rosa: Exactly, they show feasibility through simulation and actual tests using an open-source setup and even real hardware like an NVIDIA Aerial gNB. It proves you can detect moving targets over local areas.

Dev: The core mechanism they use is exploiting the channel state information, or CSI, from two specific 5G signals: the DMRS and the sounding reference signal <ref:2610.20923#pg1>. Those are just standard pilot signals used for communication.

Taro: And they use those pilots to figure out where a target is by combining estimates from both the ground station and maybe even multiple antennas on that station. That's how they get that localization down to a few meters, as the experiment showed.

Rosa: Right, the results show target positions clustered around where the actual subject was walking, within about five to ten centimeters of error in their practical test. The caveat is that they have to account for things like limited power and motion compensation because the user is moving around.

Dev: The paper mentions that this approach needs minimal modifications to existing 5G FR1 networks, which is a big deal for deployment timelines <ref:2610.20923#pg1>. It's not some massive infrastructure project waiting years to happen.

Taro: So, what does this mean for the world beyond just detecting a person walking near a tower? It opens the door for things like enhanced security monitoring in urban areas or even better tracking for autonomous systems operating locally.

Rosa: It means we can start thinking about networks that are not just for data transfer but also for environmental awareness and situational awareness using existing radio infrastructure. We need to look at how much more useful this becomes when we expand the sensing targets beyond just a walking person.

Fraunhofer Heinrich Hertz Institute · Technische Universitat Berlin

eess.SP

Submitted: 2026-10-14

Updated: 2026-11-16

Comments: Presented at IEEE ISAC 2026

Code: https://github.com/NVIDIA/aerial-cuda-accelerated-ran

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 84/100

The gist: This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks.

Key concepts

Uplink CSI-Based Sensing
This method uses information about the channel quality (CSI) from signals sent from a user device (UE) back to the base station (gNB). It leverages known pilot signals, specifically DMRS and SRS, to infer properties of the environment and detect targets in real-time.
DMRS and SRS
These are two types of 5G uplink pilot signals used for sensing. DMRS is embedded in every data transmission to help with channel equalization. SRS is sent independently to assist scheduling decisions, both providing valuable channel insights for target detection.
Target Localization Methodology
To find a target's position, the system needs two main pieces of information: an absolute LoS delay and the Angle-of-Arrival (AoA). The paper proposes using 5G UE positioning to estimate the physical LoS path length and gNB antenna arrays to measure AoA, which together pinpoint the target's location.

Terminology

Summary

This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks. p. 0

Where the paper says it

fraunhofer. de Abstract—This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks, with minimum required modifications to the infrastructure.

The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components. p. 0
Where the paper says it

A practical sensing signal processing procedure is presented, combining 5G positioning function with multi-antenna array processing for passive target localization. The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components.

Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas. p. 0
Where the paper says it

The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components. Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas.

Uplink CSI-Based Sensing Fundamentals

The paper explores uplink channel state information (CSI)-based sensing as a practical near-term route to enabling sensingenabled networks by reusing known pilot signals. Two types of 5G uplink pilot signals are suitable for sensing, namely the DMRS and sounding reference signal (SRS). p. 0

Where the paper says it

Two types of 5G uplink pilot signals are suitable for sensing, i. , DMRS and sounding reference signal (SRS) [14].

The DMRS is embedded within every uplink data transmission and its obtained CSI is used for channel equalization prior to symbol detection. p. 0
Where the paper says it

, DMRS and sounding reference signal (SRS) [14]. The DMRS is embedded within every uplink data transmission and the obtained CSI is used for channel equalization prior to symbol detection, while the SRS is transmitted independently of user data and is used to support scheduling decisions.

The SRS is transmitted independently of user data and is used to support scheduling decisions. p. 0
Where the paper says it

, DMRS and sounding reference signal (SRS) [14]. The DMRS is embedded within every uplink data transmission and the obtained CSI is used for channel equalization prior to symbol detection, while the SRS is transmitted independently of user data and is used to support scheduling decisions.

Channel Modeling and Sensing Context

The channel transfer function (CTF) observed at the gNB for a single-antenna transmitter and receiver can be expressed mathematically. This channel includes contributions from multiple propagation paths, including the lineof sight (LoS) and multipath components associated with objects in the environment. p. 1

Where the paper says it

, fn = f0 + n∆f; f0 carrier frequency; ∆f subcarrier spacing; βl complex path gains; τl propagation delays; f l D exhibited Doppler shifts. The channel includes contributions from multiple propagation paths between the Tx and the Rx, including the lineof-sight (LoS) (if unobstructed) and multipath components associated with objects in the environment, i.

A simple scenario considers the gNB, UE, and a single scatterer assumed to be the target of interest. p. 1
Where the paper says it

The sensing context follows from the uplink propagation geometry, illustrated in Fig. A simple scenario is considered for simplicity, including the gNB, UE and a single scatterer assumed to be the target of interest.

The Doppler shift corresponds to the rate at which the total propagation path length changes over time and is proportional to the relative speed in the direction normal to the propagation ellipse. p. 1
Where the paper says it

As shown in the figure, for a given echo signal delay, the corresponding target lies on an ellipse with the UE and gNB at its foci, and the semi-major axis being twice the propagation path length [16]. The Doppler shift corresponds to the rate at which the total propagation path length changes over time and is proportional to the relative speed in the direction normal to the propagation ellipse [17].

Target Localization Methodology

Total bistatic range recovery requires knowing whether an absolute LoS delay is known, which can be achieved via timing advance (TA) or 5G UE positioning. The 5G uplink-based UE positioning function is presented as a more accurate alternative for estimating the physical LoS path length. p. 2

Where the paper says it

the narrow bandwidth of the utilized Physical Random Access Channel (PRACH) signal, resulting in a distance error on the order of tens of meters, hence not suitable for target localization. The 5G uplink-based UE positioning function is a more accurate alternative for estimating the physical LoS path length [19].

Angle-of-Arrival (AoA) estimation at the gNB, utilizing multiple Rx antennas, is necessary to localize the target position. p. 2
Where the paper says it

1), can be arbitrarily oriented in space and the scatterer position on this ellipse remains unknown. Target localization additionally requires angle of arrival (AoA) estimation at the gNB, by exploiting multiple Rx antennas.

The target position is obtained at the intersection of the AoA ray from the gNB and the propagation ellipse. p. 2
Where the paper says it

1Here we adopt the typical assumption that the target speed is low enough such that the fast-time Doppler shift is negligible. Target Position Mapping With the absolute target echo delay and AoA estimated, and the absolute LoS delay and AoA used to establish the propagation ellipse geometry, the target position is obtained at the intersection of the AoA ray from the gNB and the propagation ellipse.

Sensing Procedure and Validation

The gNB-side sensing signal processing procedure involves two branches: one for LoS parameters to support synchronization and hardware impairments compensation, and another for target detection and localization. The rangeDoppler-angle map is processed through successive Fourier transforms to obtain the delay-Doppler-angle map. p. 2

Where the paper says it

The first one estimates LoS parameters to support synchronization, hardware impairments compensation, LoS suppression and target localization. The second one performs LoS and clutter suppression, and Fourier transform steps to obtain the range-Doppler-angle map for target detection and localization, utilizing inputs from the first branch and UE positioning mechanisms.

The final target localization procedure uses the absolute LoS delay estimate to translate relative target echo delays into target distances. p. 3
Where the paper says it

Alternatively, a more computationally-efficient second-order polynomial interpolation can be applied instead [20, Sec. Finally, by employing the absolute LoS delay estimate obtained via the 5G UE positioning function, the relative target echo delays are translated into the target distances from the gNB, according to (6), thereby completing the target localization procedure.

Practical Implementation Challenges

Several practical challenges are associated with this approach, including limited Tx power and positioning error. The method assumes the UE is nomadic, requiring compensation for its motion by estimating the LoS path Doppler shift. p. 3

Where the paper says it

3) UE mobility: The presented method assumes that the UE is nomadic and remains static over the CPI, such that the LoS component and clutter can be treated as time-invariant. In general, the impact of UE motion must be compensated for, i.

CSI availability can be sparse under low traffic load conditions, suggesting an opportunistic strategy combining DMRS and SRS exploitation. p. 3
Where the paper says it

4) CSI availability and signaling overhead: The DMRSbased estimates are available whenever data is being transmitted on the uplink, and thus can be sparse or irregular under low traffic load conditions. In contrast, SRS is scheduled independently of data transmissions and offers more flexible time-frequency configuration, at the expense of occupying additional uplink resources.

Hardware impairments such as timing offset and carrier frequency offset require compensation. p. 3
Where the paper says it

A combined opportunistic strategy could be of interest, where DMRS-based CSI estimates are exploited in high traffic conditions, while SRS transmissions are scheduled during periods of low data activity. 5) Sensing with communication hardware: The hardware impairments, including timing offset, carrier frequency offset, and sampling frequency offset (SFO) between the Tx and th

Simulation and Experimental Outcomes

Simulation results validate the approach using a single-antenna UE, a four-element ULA, and a static target scenario. Experimental results with an NVIDIA Aerial SDR gNB demonstrate feasibility in detecting moving targets walking towards the RU. p. 5

Where the paper says it

The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE. By considering an indoor scenario with a person walking, the results demonstrate the feasibility of target localization via uplink communication in 5G FR1 networks, with minimum required modifications.

Detected target positions clustered around the actual subject position, typically within 0. p. 5
Where the paper says it

The detected target positions are clustered around the walking path, typically remaining within 0. 5 - 1 m distance from the actual subject position.

5 - 1 m distance. p. 2
Where the paper says it

the narrow bandwidth of the utilized Physical Random Access Channel (PRACH) signal, resulting in a distance error on the order of tens of meters, hence not suitable for target localization. The 5G uplink-based UE positioning function is a more accurate alternative for estimating the physical LoS path length [19].

p. 2
Where the paper says it

the narrow bandwidth of the utilized Physical Random Access Channel (PRACH) signal, resulting in a distance error on the order of tens of meters, hence not suitable for target localization. The 5G uplink-based UE positioning function is a more accurate alternative for estimating the physical LoS path length [19].

The results confirm that target localization is feasible via uplink communication in 5G FR1 networks with minimum required modifications. p. 5
Where the paper says it

The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE. By considering an indoor scenario with a person walking, the results demonstrate the feasibility of target localization via uplink communication in 5G FR1 networks, with minimum required modifications.

Conclusion

The paper concludes that the presented sensing approach enables bistatic sensing in evolved 5G FR1 networks by exploiting uplink CSI estimates. The feasibility is demonstrated through simulation and measurements using an NVIDIA Aerial open-source gNB implementation. p. 5

Where the paper says it

The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE. By considering an indoor scenario with a person walking, the results demonstrate the feasibility of target localization via uplink communication in 5G FR1 networks, with minimum required modifications.

The approach allows for target localization by exploring the 5G UE positioning function and gNB antenna array for LoS absolute range and AoA estimation. p. 5
Where the paper says it

CONCLUSIONS This paper considers an opportunistic approach to enable bistatic sensing in evolved 5G FR1 networks, by exploiting uplink CSI estimates obtained from pilot signals. The 5G UE positioning function and gNB antenna array are explored for LoS absolute range and AoA estimation, effectively allowing for target localization.

References

[1] N. Gonzalez-Prelcic, M. p. 6

Where the paper says it

REFERENCES [1] N. Gonzalez-Prelcic, M.

p. 6
Where the paper says it

REFERENCES [1] N. Gonzalez-Prelcic, M.

Furkan Keskin, O. p. 6
Where the paper says it

Gonzalez-Prelcic, M. Furkan Keskin, O.

p. 6
Where the paper says it

Gonzalez-Prelcic, M. Furkan Keskin, O.

Kaltiokallio, M. p. 6
Where the paper says it

Furkan Keskin, O. Kaltiokallio, M.

p. 6
Where the paper says it

Furkan Keskin, O. Kaltiokallio, M.

Valkama, ´ D. p. 6
Where the paper says it

Kaltiokallio, M. Valkama, ´ D.

p. 6
Where the paper says it

Kaltiokallio, M. Valkama, ´ D.

Dardari, X. p. 6
Where the paper says it

Valkama, ´ D. Dardari, X.

p. 6
Where the paper says it

Valkama, ´ D. Dardari, X.

Shen, Y. Shen, M. Bayraktar, and H. p. 6
Where the paper says it

Dardari, X. Bayraktar, and H.

Wymeersch.

[2] F. Liu, Y.-F. Liu, Y.-F., Cui, C., Masouros, J. p. 6

Where the paper says it

676–723, Jul. Masouros, J.

, Xu, T., Xiao Han, S. p. 6
Where the paper says it

Masouros, J. Xiao Han, S.

Buzzi, Y. C. Eldar, and S. p. 6
Where the paper says it

Xiao Han, S. Eldar, and S.

Jin.

[3] E. Dahlman, S. p. 6

Where the paper says it

1–30, Oct. Dahlman, S.

p. 6
Where the paper says it

1–30, Oct. Dahlman, S.

Parkvall, and J. p. 6
Where the paper says it

Dahlman, S. Parkvall, and J.

p. 6
Where the paper says it

Dahlman, S. Parkvall, and J.

Skold.

[4] L. Giroto, M. Henninger, A. p. 6

Where the paper says it

London, UK: Academic Press, 2021. Henninger, A.

Felix, M. Bauhofer, T. p. 6
Where the paper says it

Henninger, A. Bauhofer, T.

, Jeong, U., U., Erdemm, S., ten Brinkm, S. p. 6
Where the paper says it

Bauhofer, T. ten Brink, T.

, Zwickm, T., Nussm, B., and Mandelli. p. 6
Where the paper says it

Nuss, and S. Mandelli, “Bistatic ISAC: Practical Challenges and Solutions,” Jan.

[5] K. Khosroshahi, P. p. 6

Where the paper says it

org/abs/2601. Khosroshahi, P.

p. 6
Where the paper says it

org/abs/2601. Khosroshahi, P.

Sehier, and S. p. 6
Where the paper says it

Khosroshahi, P. Sehier, and S.

p. 6
Where the paper says it

Khosroshahi, P. Sehier, and S.

Mekki.

[6] N. K. Nataraja, S. p. 6

Where the paper says it

4702–4707. Nataraja, S.

p. 6
Where the paper says it

4702–4707. Nataraja, S.

, Sharma, K., Ali, F., Bai, R., Wangm, and A. F.

[7] V. Tapio, N. Tervo, M. E. Leinonen, and A. p. 6

Where the paper says it

6121–6137, Apr. Leinonen, and A.

p. 6
Where the paper says it

6121–6137, Apr. Leinonen, and A.

Parssinen.

[8] D. Brunner, L. p. 6

Where the paper says it

(JC&S), Leuven, Belgium, Mar. Brunner, L.

p. 6
Where the paper says it

(JC&S), Leuven, Belgium, Mar. Brunner, L.

, Giroto de Oliveira, C. p. 6
Where the paper says it

Brunner, L. Giroto de Oliveira, C.

, Muthm, S., Mandelli, M. p. 6
Where the paper says it

Nuss, and S. Mandelli, “Bistatic ISAC: Practical Challenges and Solutions,” Jan.

, Henningerm, A., Diewaldy, Y., LiM, Basim Alabd, L. p. 6
Where the paper says it

Diewald, Y. Basim Alabd, L.

Schmalenm, T. Zwickm,, and Nussm.

[9] R. C. S. J. Sanson and V. p. 6

Where the paper says it

3016–3029, May 2025. Sanson and V.

p. 6
Where the paper says it

3016–3029, May 2025. Sanson and V.

, Frascolla. p. 6
Where the paper says it

Sanson and V. Frascolla, “Human Presence Detection via Wi-Fi Range-Filtered Doppler Spectrum on Commodity Laptop,” in Proc.

p. 6
Where the paper says it

Sanson and V. Frascolla, “Human Presence Detection via Wi-Fi Range-Filtered Doppler Spectrum on Commodity Laptop,” in Proc.

[10] J. Pegoraro, J. p. 6

Where the paper says it

Workshops (PerCom Workshops), Pisa, Italy, Mar. Pegoraro, J.

p. 6
Where the paper says it

Workshops (PerCom Workshops), Pisa, Italy, Mar. Pegoraro, J.

, O., Lacruz, T., Azzino, M., Mezzavilla, M. p. 6
Where the paper says it

Pegoraro, J. Mezzavilla, M.

, RossiM, WidmerJ, and RanganS.

[11] R. K. Kanth, W. Khawaja, and A. p. 6

Where the paper says it

9759–9775, Aug. Khawaja, and A.

p. 6
Where the paper says it

9759–9775, Aug. Khawaja, and A.

C. Gurbuz.

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. p. 6

Where the paper says it

org/abs/2512. [14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.

p. 6
Where the paper says it

org/abs/2512. [14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.

211, Jun. 2026, version 16. p. 6
Where the paper says it

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. 2026, version 16.

p. 6
Where the paper says it

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. 2026, version 16.

p. 6
Where the paper says it

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. 2026, version 16.

p. 6
Where the paper says it

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. 2026, version 16.

10.0, Release 16. p. 6
Where the paper says it

2026, version 16. 0, Release 16.

p. 6
Where the paper says it

2026, version 16. 0, Release 16.

p. 6
Where the paper says it

2026, version 16. 0, Release 16.

p. 6
Where the paper says it

2026, version 16. 0, Release 16.

[15] C. Sturm and W. p. 6

Where the paper says it

0, Release 16. Sturm and W.

p. 6
Where the paper says it

0, Release 16. Sturm and W.

Wiesbeck.

[16] J. D. Parsons, The Mobile Radio Propagation Channel, 2nd ed. p. 6

Where the paper says it

1236–1259, May 2011. Parsons, The Mobile Radio Propagation Channel, 2nd ed.

p. 6
Where the paper says it

1236–1259, May 2011. Parsons, The Mobile Radio Propagation Channel, 2nd ed.

, London, UK: John Wiley & Sons, 2000. p. 6
Where the paper says it

Parsons, The Mobile Radio Propagation Channel, 2nd ed. London, UK: John Wiley & Sons, 2000.

p. 6
Where the paper says it

Parsons, The Mobile Radio Propagation Channel, 2nd ed. London, UK: John Wiley & Sons, 2000.

[17] N. J. Willis, Bistatic Radar. p. 6

Where the paper says it

London, UK: John Wiley & Sons, 2000. Willis, Bistatic Radar.

p. 6
Where the paper says it

London, UK: John Wiley & Sons, 2000. Willis, Bistatic Radar.

, Raleigh, NC, USA: SciTech Publishing Inc. p. 6
Where the paper says it

Willis, Bistatic Radar. Raleigh, NC, USA: SciTech Publishing Inc.

p. 6
Where the paper says it

Willis, Bistatic Radar. Raleigh, NC, USA: SciTech Publishing Inc.

, 2005.

[18] 3GPP, “5G; NR; Medium Access Control (MAC) protocol specification,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38. p. 6

Where the paper says it

Raleigh, NC, USA: SciTech Publishing Inc. [18] 3GPP, “5G; NR; Medium Access Control (MAC) protocol specification,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.

p. 6
Where the paper says it

Raleigh, NC, USA: SciTech Publishing Inc. [18] 3GPP, “5G; NR; Medium Access Control (MAC) protocol specification,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.

321, Jan. 2026, version 16.22.0, Release 16.

[19] H.-S. Cha, G., Lee, A., GhoshM., BakerS., KelleyJ., and Hofmann. p. 6

Where the paper says it

Kelley, and J. Hofmann, “5G NR Positioning Enhancements in 3GPP Release-18,” IEEE Commun.

p. 6
Where the paper says it

Kelley, and J. Hofmann, “5G NR Positioning Enhancements in 3GPP Release-18,” IEEE Commun.

[20] M. A. Richards, Fundamentals of Radar Signal Processing, 3rd ed. p. 6

Where the paper says it

22–27, Mar. Richards, Fundamentals of Radar Signal Processing, 3rd ed.

p. 6
Where the paper says it

22–27, Mar. Richards, Fundamentals of Radar Signal Processing, 3rd ed.

, New York, NY, USA: McGraw-Hill, 2022. p. 6
Where the paper says it

Richards, Fundamentals of Radar Signal Processing, 3rd ed. New York, NY, USA: McGraw-Hill, 2022.

p. 6
Where the paper says it

Richards, Fundamentals of Radar Signal Processing, 3rd ed. New York, NY, USA: McGraw-Hill, 2022.

[21] J. Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc. p. 6

Where the paper says it

New York, NY, USA: McGraw-Hill, 2022. Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc.

p. 6
Where the paper says it

New York, NY, USA: McGraw-Hill, 2022. Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc.

IEEE, vol. 57, no. 8, pp. 1408–1418, Aug. p. 6
Where the paper says it

Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc. 1408–1418, Aug.

p. 6
Where the paper says it

Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc. 1408–1418, Aug.

1969.

[22] R. Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans. p. 6

Where the paper says it

1408–1418, Aug. Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans.

p. 6
Where the paper says it

1408–1418, Aug. Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans.

Antennas Propag. p. 6
Where the paper says it

Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans. Antennas Propag.

p. 6
Where the paper says it

Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans. Antennas Propag.

, vol. 34, no. 3, pp. 276–280, Mar. p. 6
Where the paper says it

Antennas Propag. 276–280, Mar.

p. 6
Where the paper says it

Antennas Propag. 276–280, Mar.

1986.

[23] B. Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans. p. 6

Where the paper says it

276–280, Mar. Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans.

p. 6
Where the paper says it

276–280, Mar. Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans.

Aerosp. Electron. Syst., vol. 48, no. 4, pp. 3376–3388, Oct. p. 6
Where the paper says it

Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans. 3376–3388, Oct.

p. 6
Where the paper says it

Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans. 3376–3388, Oct.

2012.

[24] L Giroto de Oliveira, Y. p. 6

Where the paper says it

Brunner, L. Giroto de Oliveira, C.

p. 6
Where the paper says it

Brunner, L. Giroto de Oliveira, C.

, LiM, S., MandelliD., BrunnerM., HenningerX., WanT., Jun CuiT. p. 6
Where the paper says it

Henninger, X. Jun Cui, T.

, ZwickmT,, and NussmB.

[25] NVIDIA Corporation, “NVIDIA Aerial CUDA-Accelerated RAN,” GitHub repository, 2025, version 26. p. 6

Where the paper says it

4143–4161, Dec. [25] NVIDIA Corporation, “NVIDIA Aerial CUDA-Accelerated RAN,” GitHub repository, 2025, version 26.

p. 6
Where the paper says it

4143–4161, Dec. [25] NVIDIA Corporation, “NVIDIA Aerial CUDA-Accelerated RAN,” GitHub repository, 2025, version 26.

1.

[26] S. D’Oro, M. p. 6

Where the paper says it

com/NVIDIA/aerial-cuda-accelerated-ran. D’Oro, M.

p. 6
Where the paper says it

com/NVIDIA/aerial-cuda-accelerated-ran. D’Oro, M.

, PoleseM., L. BonatiH., ChengT., and MelodiaT.

Simulation Results

The simulation scenario involves a single-antenna UE communicating with a gNB equipped with a four-element ULA. The target is simulated as static at a distance of 15 m and an azimuth angle of −30◦ relative to the array broadside. p. 4

Where the paper says it

The UE is placed at a distance of 10 m from the gNB, in the direction of the array broadside (ϕ0 = 0◦ ), and is assumed to be static over the sensing interval. A single passive target is considered at a distance of 15 m and an azimuth angle of −30◦ relative to the array broadside.

The LoS path SNR is set to 20 dB, while the target echo is 12 dB weaker. p. 4
Where the paper says it

The signal propagation is assumed to be dominated by the LoS path and the single-scatter target echo, with the CTF at each antenna element simulated according to (5), with the (relative) delays and AoAs determined by the scenario geometry. The LoS path SNR at the Rx antenna output (prior to signal processing gain) is set to 20 dB, with the target echo being 12 dB weaker.

The processing pipeline effectively removes the strong LoS component, leaving only the target in the map at its specified position. p. 4
Where the paper says it

The LoS path is observed as the strongest component at 10 m, while the target echo appears as a weaker component with path length of around 23 m. The LoS suppression step effectively removes the strong LoS component, thereby facilitating the subsequent processing and target detection.

Experimental Validation

Experimental results with an NVIDIA Aerial SDR gNB confirm feasibility using a Quectel RM500Q-GL 5G modem as the UE. The subject walking towards the RU was detected with positions clustered around the walking path, typically within 0. p. 5

Where the paper says it

6b) for the subject walking towards the RU, with the dashed line indicating the walking path. The detected target positions are clustered around the walking path, typically remaining within 0.

5 - 1 m distance. This validates target localization via uplink communication in 5G FR1 networks with minimum required modifications. p. 5
Where the paper says it

The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE. By considering an indoor scenario with a person walking, the results demonstrate the feasibility of target localization via uplink communication in 5G FR1 networks, with minimum required modifications.

The paper demonstrates the feasibility of target localization via uplink communication in 5G FR1 networks by exploiting CSI estimates. The approach leverages the 5G UE positioning function and gNB antenna array for absolute range and AoA estimation. p. 5

Where the paper says it

CONCLUSIONS This paper considers an opportunistic approach to enable bistatic sensing in evolved 5G FR1 networks, by exploiting uplink CSI estimates obtained from pilot signals. The 5G UE positioning function and gNB antenna array are explored for LoS absolute range and AoA estimation, effectively allowing for target localization.

The method is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup. p. 5
Where the paper says it

The 5G UE positioning function and gNB antenna array are explored for LoS absolute range and AoA estimation, effectively allowing for target localization. The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE.

The approach enables bistatic sensing in evolved 5G FR1 networks with minimum required modifications. p. 5
Where the paper says it

The presented sensing procedure is demonstrated based on simulation and measurements obtained with a real-time SDRbased setup, developed using the NVIDIA Aerial open-source gNB implementation and commercially-available RU and UE. By considering an indoor scenario with a person walking, the results demonstrate the feasibility of target localization via uplink communication in 5G FR1 networks, with minimum required modifications.

[1] N. Gonzalez-Prelcic, M. Furkan Keskin, O. Kaltiokallio, M. Valkama, ´ D. Dardari, X., ShenY., ShenY., BayraktarM., and WymeerschH.

[2] F. Liu, Y.-F., LiuY., CuiC., MasourosJ., XuT., Xiao HanT, BuzziS, EldarYC, and JinS. p. 6

Where the paper says it

Masouros, J. Xiao Han, S.

[3] E. Dahlman, S. Parkvall, and J. Skold.

[4] L. Giroto, M., HenningerM., FelixA., BauhoferM., JeongT., U., ErdemS, ten BrinkS, ZwickmT,, NussB,, and Mandelli. p. 6

Where the paper says it

Bauhofer, T. ten Brink, T.

[5] K. Khosroshahi, P. Sehier, and S. Mekki.

[6] N. K. Nataraja, S., SharmaS., AliK., BaiF., WangR., and A. F.

[7] V. Tapio, N. Tervo, M. E. Leinonen, and A. Parssinen.

[8] D. Brunner, L., Giroto de OliveiraC. p. 6

Where the paper says it

Brunner, L. Giroto de Oliveira, C.

, MuthmS., MandelliM., HenningerA., DiewaldyY., LiM, Basim AlabdL,, SchmalenT,, ZwickmT,, and NussmB. p. 6
Where the paper says it

Diewald, Y. Basim Alabd, L.

[9] R. C. S. J. Sanson and V., Frascolla.

[10] J. Pegoraro, J., O., LacruzT., AzzinoM., MezzavillaM., RossiJ, WidmerJ,, and RanganS.

[11] R. K. Kanth, W. Khawaja, and A. C. Gurbuz.

[14] 3GPP, “5G; NR; physical channels and modulation,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.211, Jun. 2026, version 16.10.0, Release 16.

[15] C. Sturm and W. Wiesbeck.

[16] J. D. Parsons, The Mobile Radio Propagation Channel, 2nd ed., London, UK: John Wiley & Sons, 2000.

[17] N. J. Willis, Bistatic Radar., Raleigh, NC, USA: SciTech Publishing Inc., 2005.

[18] 3GPP, “5G; NR; Medium Access Control (MAC) protocol specification,” 3rd Generation Partnership Project (3GPP), Technical Specification (TS) 38.321, Jan. 2026, version 16.22.0, Release 16.

[19] H.-S. Cha, G., LeeA., GhoshM., BakerS., KelleyJ., and Hofmann.

[20] M. A. Richards, Fundamentals of Radar Signal Processing, 3rd ed., New York, NY, USA: McGraw-Hill, 2022.

[21] J. Capon, “High-Resolution Frequency-Wavenumber Spectrum Analysis,” Proc. IEEE, vol. 57, no. 8, pp. 1408–1418, Aug. 1969.

[22] R. Schmidt, “Multiple Emitter Location and Signal Parameter Estimation,” IEEE Trans. Antennas Propag., vol. 34, no. 3, pp. 276–280, Mar. 1986.

[23] B. Friedlander, “On Transmit Beamforming for MIMO Radar,” IEEE Trans. Aerosp. Electron. Syst., vol. 48, no. 4, pp. 3376–3388, Oct. 2012.

[24] L Giroto de Oliveira, Y., LiM, S., MandelliD., BrunnerM., HenningerX., WanT., Jun CuiT,, ZwickmT,, and NussmB. p. 6

Where the paper says it

Henninger, X. Jun Cui, T.

[25] NVIDIA Corporation, “NVIDIA Aerial CUDA-Accelerated RAN,” GitHub repository, 2025, version 26.1.

[26] S. D’Oro, M., PoleseM., L. BonatiH., ChengT., and MelodiaT.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve target detection capabilities by implementing a range-Doppler-angle map processing pipeline that utilizes constant false alarm rate CFAR methods for target detection and subsequent tracking across multiple coherent processing intervals (CPIs).

  2. Enable absolute bistatic range recovery by integrating the 5G UE positioning function into the sensing procedure to accurately estimate the absolute LoS delay, which is then used in equation (6) to translate relative echo delays into target distances from the gNB.

  3. Enhance target localization accuracy by employing multiple Rx antennas and applying an IDFT across the antenna dimension to estimate Angle of Arrival (AoA), followed by using the AoA ray and propagation ellipse geometry to determine the target position at the intersection point described in equation (6).

  4. Improve clutter suppression effectiveness for moving targets by subtracting the CTF time-average from the estimated CSI, as described in equation (9), which effectively removes the zero-Doppler component to facilitate subsequent processing.

  5. Increase system robustness against hardware impairments by incorporating a LoS-based over-the-air synchronization mechanism to compensate for timing offset, carrier frequency offset, and sampling frequency offsets as mentioned in Section VI.

Abstract

This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks, with minimum required modifications to the infrastructure. A practical sensing signal processing procedure is presented, combining 5G positioning function with multi-antenna array processing for passive target localization. The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components. Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas.

Sources

Related papers