Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.
Rosa: We're looking at the paper: "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems".
Dev: Here's the gist of the paper. Large-scale signal processing systems increasingly rely on tensor operations whose distributed execution is constrained by communication, memory, and latency bottlenecks <ref:2609.30567#pg2> In this paper, we propose a tensor-aware coded computation framework for distributed mode-1 tensor–matrix multiplication that operates directly on tensor subtensors, avoiding explicit unfolding and preserving multi-dimensional structure <ref:2609.30567#pg3> This approach achieves the same recovery threshold, communication cost, worker-side computation, and memory requirements as conventional matrixbased PolyDot schemes for a fixed partitioning configuration <ref:2609.30567#pg5> However, by leveraging multivariate encoding, it replaces high-degree univariate interpolation at the fusion node with structured low-dimensional decoding <ref:2609.30567#pg6> This leads to a substantial reduction in decoding complexity and latency without affecting any other system metric <ref:2609.30567#pg6> System Model and Problem Formulation The computation involves the mode-1 tensor–matrix product Y = A ×1 B, which produces a tensor Y ∈ R P ×I2×···×IN <ref:2609.30567#pg2> This operation corresponds to multiplying the tensor along its first mode <ref:2609.30567#pg2> The equivalence to matrix multiplication is given by Y(1) = BA(1) ∈ R P ×M, where A(1) is the mode-1 matrix unfolding of A <ref:2609.30567#pg3> In a distributed setting, the objective is to design a coded distributed computation scheme that minimizes the number of worker responses required for recovery (recovery threshold), balances computation and memory across workers, reduces communication overhead, and minimizes decoding complexity at the fusion node <ref:2609.30567#pg4> Coded Computation Strategies Two primary coding strategies are presented: a baseline matrix-based approach and a proposed tensor-aware scheme <ref:2609.30567#pg5> The matrix-based PolyDot relies on explicit tensor unfolding, which increases memory traffic and results in decoding procedures based on high-degree univariate polynomial interpolations <ref:2609.30567#pg5> In contrast, the Tensor-PolyDot scheme operates directly on tensor subtensors without unfolding <ref:2609.30567#pg5> This proposed scheme introduces a multivariate encoding and decoding strategy that replaces high-degree univariate interpolation with structured lowdimensional interpolation <ref:2609.30567#pg6> Performance Preservation and Gains The proposed tensor-based framework preserves all fundamental system metrics, including recovery threshold, communication cost, and worker-side computation and memory matching those of matrix-based PolyDot schemes <ref:2609.30567#pg5> Specifically, the recovery threshold is determined by the total number of distinct polynomial evaluations required to recover all coefficients, yielding K = (2s − 1)t for both approaches <ref:2609.30567#pg5> While computation and memory requirements are identical for both schemes because they depend only on partition sizes <ref:2609.30567#pg5>, the decoding complexity differs significantly <ref:2609.30567#pg5> Latency Reduction through Multivariate Decoding The key advantage of the tensor-based approach is in the decoding stage, where multivariate decoding decomposes into lowdimensional interpolation problems that can be performed in parallel <ref:2609.30567#pg5> The complexity of matrix-based decoding is Cmat ∼ PM(2s − 1)2t, whereas the proposed tensor-based decoding complexity is Cten ∼ PM(2s − 1)2 + XNn=2u n <ref:2609.30567#pg5> This results in a decoding speedup Sdecode ≈ t for balanced partitions <ref:2609.30567#pg5> The resulting reduction in decoding complexity directly translates into lower end-to-end latency, which is critical for distributed signal processing systems <ref:2609.30567#pg5> Practical Numerical Results Numerical evaluations demonstrate that the proposed tensor-PolyDot scheme achieves substantial decoding speedups, reaching up to an order-of-magnitude improvement in practical settings <ref:2609.30567#pg2> For a representative setting with t = 16, the decoding speedup reaches approximately 14×, close to the ideal linear scaling with t <ref:2609.30567#pg5> The estimated decoding runtime for tensor-PolyDot maintains significantly lower runtime compared to the matrix-based scheme as t grows <ref:2609.30567#pg5> This confirms that decoding constitutes a dominant component of end-to-end latency in coded distributed computation systems <ref:2609.30567#pg5> Overall, the proposed framework introduces a new design dimension enabling significant reductions in decoding complexity and latency without imposing additional worker-side or communication overhead <ref:2609.
Title and authors: Rosa: So, we've been looking at this paper about the "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems," and it basically shows a way to handle those heavy tensor operations across many workers without blowing up the communication or memory usage.
Dev: It focuses on keeping everything running at the same performance level as older matrix based PolyDot schemes, but getting a much better decoding speed by using multivariate encoding instead of those complicated univariate polynomial interpolations <ref:2609.30567#pg5>.
Taro: The core idea they are pushing is that you don't have to unfold the tensor into a giant matrix before you start calculating, which means better memory locality and less traffic across the network <ref:2609.30567#pg3>.
Rosa: That’s right, and this approach keeps all the metrics—the recovery threshold, how much memory each worker needs, even communication costs—exactly the same as those older matrix based schemes <ref:2609.30567#pg5>. So for someone who just runs a trial outside the lab, it means you can keep your setup consistent without worrying about the hardware changing things up <ref:2609.30567#pg1>.
Dev: Right, and that decoding complexity drops substantially because they turn those difficult math problems into structured low dimensional interpolation that actually runs in parallel <ref:2609.30567#pg5>. That parallelism is what drives the speedup we're talking about <ref:2609.30567#pg1>.
Taro: It means for a system researcher, this is interesting because you get to keep your established resource budget while still getting that significant reduction in end to end latency, which is huge for real time loops <ref:2609.30567#pg5>.
The paper's summary: Rosa: Now let’s get into the core idea from "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems." They are looking at large signal processing systems that use tensor operations, and they found that executing those operations across many workers is often choked by communication and memory.
Dev: The problem they address is that most existing coded computation frameworks are matrix centric; they force you to unfold the tensor data into matrices before you can even process it <ref:2609.30567#pg2>.
Taro: So, to put that in simpler terms, instead of treating a complex three dimensional or four dimensional tensor as a giant flattened matrix for calculation, they want us to work with it directly <ref:2609.30567#pg2>. Is that the main conceptual shift here?
Rosa: Exactly. They propose a tensor-aware coded computation framework that operates directly on tensor subtensors without needing that explicit unfolding step <ref:2609.30567#pg1>. The key idea is exploiting the inherent multi-dimensional structure of tensors to improve efficiency, which they call t <ref:2609.30567#pg2>.
Dev: And then they solve the bottleneck at the fusion node by using multivariate encoding and decoding instead of those high-degree univariate polynomial interpolations <ref:2609.30567#pg2>. That interpolation step is a major computational choke point when you have limited resources <ref:2609.30567#pg2>.
Taro: So, to summarize, the summary is that they tackle memory and communication issues by keeping the tensor structure intact, and they attack the latency issue by replacing that complicated interpolation with something more efficient <ref:2609.30567#pg1>.
Rosa: Right. They minimize four things: first, how many worker responses you need for recovery which is the recovery threshold <ref:2609.30567#pg3>, second, balancing computation and memory across workers <ref:2609.30567#pg3>, third, reducing communication overhead <ref:2609.30567#pg4>, and finally minimizing that decoding complexity at the fusion node <ref:2609.30567#pg4>.
Dev: And they claim that for a fixed partitioning configuration, all those metrics—threshold, cost per worker per communication round size—stay exactly the same as the conventional matrixbased PolyDot schemes <ref:2609.30567#pg5>.
Taro: So they kept the resource profile identical, but improved the internal mechanism of how things are calculated at that fusion node to get a speedup <ref:2609.30567#pg1>. I’m still wondering about how that structured decoding actually translates into real-world gains for someone who isn't just looking at theoretical complexity metrics.
The paper's improvements: Dev: Now let’s look at what they actually suggest as improvements over what was already out there, focusing on the practical gains they claim in "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems" <ref:2609.30567#pg1>. They focus heavily on replacing the existing interpolation method.
Taro: They replace high-degree univariate interpolation with structured low-dimensional decoding, which is a significant move because it suggests that the complexity bottleneck isn't just in the math, but in how we structure our calculation at that fusion node <ref:2609.30567#pg6>.
Rosa: That’s right. The improvement is replacing high-degree univariate interpolation with structured low-dimensional decoding, and they claim this leads to a substantial reduction in decoding complexity and latency without affecting any other system metrics <ref:2609.30567#pg1>.
Dev: This means the speedup comes from making the decoding decomposable into problems that can run in parallel instead of being one long, sequential calculation <ref:2609.30567#pg5>.
Taro: So if we think about what this means for actual deployment, it suggests you can get better performance without having to fundamentally redesign your entire partitioning scheme or drastically increase the memory you need <ref:2609.30567#pg1>.
Rosa: It’s just about making sure the computation and memory requirements stay identical based on the partition sizes, but the way they decode it at the fusion node gets much faster because it can be done in parallel <ref:2609.30567#pg5>.
Conclusion: Dev: So we’ve been looking at this paper about "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems," and basically, they figured out how to do these heavy tensor operations across many workers without blowing up the communication or memory usage <ref:2609.30567#pg1>.
Rosa: Yeah, it’s about keeping everything running at the same performance level as older matrix based PolyDot schemes, but getting a much better decoding speed by using multivariate encoding instead of those complicated univariate polynomial interpolations <ref:2609.30567#pg5>.
Taro: I mean, the core idea is that they don't have to unfold the tensor into a giant matrix before they start calculating, which means better memory locality and less traffic across the network <ref:2609.30567#pg3>.
Taro: Right, and that decoding complexity drops substantially because they turn those difficult math problems into structured low dimensional interpolation that actually runs in parallel <ref:2609.30567#pg5>. That parallelism is what drives the speedup we’re talking about <ref:2609.30567#pg1>.
Rosa: So in the end, "Low-Latency Coded Tensor--Matrix Multiplication for Distributed Signal Processing Systems" shows that you can design your computation to exploit the tensor structure directly to get much lower decoding latency without changing how much memory or communication you need <ref:2609.30567#pg1>.
Dev: Yeah, it’s a solid design dimension if you are working on these kinds of distributed signal processing tasks where every millisecond counts <ref:2609.30567#pg5>.
EURECOM University · IPSA and LINCS Lab
eess.SP, cs.IT, math.IT
Submitted: 2026-09-24
Updated: 2026-09-24
Comments: To appear in Proceedings, IEEE International Workshop on Signal Processing Systems (SiPS), November 2nd-4th, 2026, Bordeaux, France
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 88/100
The gist: Large-scale signal processing systems increasingly rely on tensor operations whose distributed execution is constrained by communication, memory…
Key concepts
- Mode-1 Tensor–Matrix Multiplication
- This is a specific type of computation where a tensor is multiplied along its first dimension. It's crucial in signal processing for tasks like filtering or transforming large datasets, and the paper focuses on making this operation efficient when distributed across many workers.
- Tensor Subtensors
- Instead of flattening the entire tensor into a matrix (unfolding), this method works directly with smaller pieces of the tensor. This avoids creating massive intermediate structures that consume significant memory and communication bandwidth, preserving the original multi-dimensional shape.
- Multivariate Encoding and Decoding
- The proposed scheme uses a multivariate encoding strategy to represent the computation. This encoding allows the complex decoding step at the fusion node to be broken down into simpler, structured low-dimensional interpolation problems that can be solved much faster in parallel.
Terminology
Summary
Large-scale signal processing systems increasingly rely on tensor operations whose distributed execution is constrained by communication, memory, and latency bottlenecks <ref:2609. p. 0 khalesi@ipsa. fr
Abstract—Large-scale signal processing systems, including
aeronautical and aerospace platforms, increasingly rely on
tensor operations, whose distributed execution is constrained
by communication, memory, and latency bottlenecks. fr
Abstract—Large-scale signal processing systems, including
aeronautical and aerospace platforms, increasingly rely on
tensor operations, whose distributed execution is constrained
by communication, memory, and latency bottlenecks. In this
paper, we propose a tensor-aware coded computation framework
for distributed mode-1 tensor–matrix multiplication that operates
directly on tensor subtensors, avoiding explicit unfolding and
preserving multi-dimensional structure. In this
paper, we propose a tensor-aware coded computation framework
for distributed mode-1 tensor–matrix multiplication that operates
directly on tensor subtensors, avoiding explicit unfolding and
preserving multi-dimensional structure. For a fixed partitioning
configuration, the proposed tensor-PolyDot scheme achieves
the same recovery threshold, communication cost, worker-side
computation, and memory requirements as conventional matrixbased PolyDot schemes. For a fixed partitioning
configuration, the proposed tensor-PolyDot scheme achieves
the same recovery threshold, communication cost, worker-side
computation, and memory requirements as conventional matrixbased PolyDot schemes. However, by leveraging multivariate
encoding, it replaces high-degree univariate interpolation at the
fusion node with structured low-dimensional decoding. However, by leveraging multivariate
encoding, it replaces high-degree univariate interpolation at the
fusion node with structured low-dimensional decoding. This leads
to a substantial reduction in decoding complexity and latency,
without affecting any other system metric.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
System Model and Problem Formulation
The computation involves the mode-1 tensor–matrix product Y = A ×1 B, which produces a tensor Y ∈ R P ×I2×···×IN <ref:2609.30567#pg2> This operation corresponds to multiplying the tensor along its first mode <ref:2609. p. 1 a) Element-wise interpretation. : The mode-1 product
corresponds to multiplying the tensor along its first mode. (3)
Then, the tensor–matrix product can be equivalently written
as a matrix multiplication of the form
Y(1) = BA(1) ∈ R
P ×M. (4)
While this equivalence is useful for analysis, explicitly
forming A(1) may incur significant memory overhead and
disrupt data locality. • Minimizes the number of worker responses required for
recovery (recovery threshold),
• Balances computation and memory across workers,
• Reduces communication overhead, and
• Minimizes decoding complexity at the fusion node. d) Partitioning along mode-1.Where the paper says it
Where the paper says it
Where the paper says it
Coded Computation Strategies
Two primary coding strategies are presented: a baseline matrix-based approach and a proposed tensor-aware scheme <ref:2609.30567#pg5> The matrix-based PolyDot relies on explicit tensor unfolding, which increases memory traffic and results in decoding procedures based on high-degree univariate polynomial interpolations <ref:2609. p. 1 This abstraction overlooks the inherent multi-dimensional
structure of tensors, often leading to increased memory traffic,
loss of data locality, and additional preprocessing overhead. More importantly, it results in decoding procedures based on
high-degree univariate polynomial interpolations, a significant
computational bottleneck at the fusion node, given the limited
computational resources. In this
paper, we propose a tensor-aware coded computation framework
for distributed mode-1 tensor–matrix multiplication that operates
directly on tensor subtensors, avoiding explicit unfolding and
preserving multi-dimensional structure. For a fixed partitioning
configuration, the proposed tensor-PolyDot scheme achieves
the same recovery threshold, communication cost, worker-side
computation, and memory requirements as conventional matrixbased PolyDot schemes. • Multivariate coding for efficient decoding: We introduce
a multivariate encoding and decoding strategy that replaces
high-degree univariate interpolation with structured lowdimensional interpolation, reducing decoding complexity
by a factor proportional to the tensor partitioning factor. • Preservation of system guarantees: We show that the
proposed scheme preserves all fundamental system metrics—including recovery threshold, communication cost,
and worker-side computation and memory—matching
those of matrix-based PolyDot schemes.Where the paper says it
Where the paper says it
Where the paper says it
Performance Preservation and Gains
The proposed tensor-based framework preserves all fundamental system metrics, including recovery threshold, communication cost, and worker-side computation and memory matching those of matrix-based PolyDot schemes <ref:2609.30567#pg5> Specifically, the recovery threshold is determined by the total number of distinct polynomial evaluations required to recover all coefficients, yielding K = (2s − 1)t for both approaches <ref:2609. p. 2 Recovery Threshold
For both schemes, the recovery threshold is determined by
the total number of distinct polynomial evaluations required
to recover all coefficients. This yields K = (2s − 1)t, which
means that both approaches achieve identical robustness to
stragglers. (9)
The peak memory requirement per worker, including input
and output blocks, is equivalent to
memory ∼ P
I1
s
+
I1
s
M
t
+ P
M
t
. (10)
These quantities are identical for both matrix- and tensorbased schemes, since they depend only on partition sizes. This
motivates the need for distributed computation strategies that
reduce decoding latency without compromising robustness. The
proposed tensor-aware coded computation framework addresses
this challenge by exploiting multi-dimensional structure to
significantly reduce decoding complexity while preserving
resilience to stragglers, making it particularly well-suited for
next-generation aeronautical and aerospace distributed signal
processing systems.Where the paper says it
Where the paper says it
Where the paper says it
Latency Reduction through Multivariate Decoding
The key advantage of the tensor-based approach is in the decoding stage, where multivariate decoding decomposes into lowdimensional interpolation problems that can be performed in parallel <ref:2609.30567#pg5> The complexity of matrix-based decoding is Cmat ∼ PM(2s − 1)2t, whereas the proposed tensor-based decoding complexity is Cten ∼ PM(2s − 1)2 + XNn=2u n <ref:2609. p. 3 a) Matrix-based decoding (univariate): After variable
folding, decoding requires interpolation of a univariate polynomial of degree (2s − 1)t − 1, leading to a complexity
Cmat ∼ PM(2s − 1)2
t. (12)
b) Tensor-based decoding (multivariate): In the proposed scheme, multivariate decoding decomposes into lowdimensional interpolations along the coding variables, with
total complexity
Cten ∼ PM
(2s − 1)2 +
X
N
n=2
u
2
n
. (12)
b) Tensor-based decoding (multivariate): In the proposed scheme, multivariate decoding decomposes into lowdimensional interpolations along the coding variables, with
total complexity
Cten ∼ PM
(2s − 1)2 +
X
N
n=2
u
2
n
. (13)
c) Decoding speedup: The resulting speedup is
Sdecode =
(2s − 1)2
t
(2s − 1)2 +
PN
n=2 u
2
n
≈ t (14)
for balanced partitions. Third,
this reduction directly translates into lower latency, making the
proposed approach particularly effective in systems where the
fusion node is the performance bottleneck. Overall, the proposed tensor-aware coding framework improves end-to-end efficiency without imposing additional
worker-side or communication overhead, highlighting the
benefit of exploiting tensor structure in distributed signal
processing systems.Where the paper says it
Where the paper says it
Where the paper says it
Practical Numerical Results
Numerical evaluations demonstrate that the proposed tensor-PolyDot scheme achieves substantial decoding speedups, reaching up to an order-of-magnitude improvement in practical settings <ref:2609.30567#pg2> For a representative setting with t = 16, the decoding speedup reaches approximately 14×, close to the ideal linear scaling with t <ref:2609. p. 4 2 illustrates the decoding
speedup in (14), which increases nearly linearly with t
for balanced partitions. For t = 16, the speedup reaches
approximately 14×, close to the ideal value t = 16. 3 shows the estimated decoding runtime as a function of t. The matrix-based scheme
exhibits rapidly increasing latency as t grows, whereas tensorPolyDot maintains significantly lower runtime due to its
multivariate decoding structure. The matrix-based scheme
exhibits rapidly increasing latency as t grows, whereas tensorPolyDot maintains significantly lower runtime due to its
multivariate decoding structure. b) Latency implications: The results confirm that decoding constitutes a dominant component of end-to-end latency in
coded distributed computation systems. In
addition, the tensor-based approach improves memory locality
and enables parallel decoding across tensor modes, making it
better aligned with modern hardware architectures. Overall, the proposed framework introduces a new design
dimension in coded distributed computing: it enables significant reductions in decoding complexity and latency without
incurring any penalty in recovery threshold, communication,
or worker-side resources.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI systems can perform distributed mode-1 tensor–matrix multiplication on large-scale signal processing data while achieving substantial latency reductions at the fusion node, with decoding speedups reaching up to an order-of-magnitude improvement in practical settings.
-
The system can maintain identical recovery threshold, communication cost, worker computation, and memory requirements as conventional matrixbased PolyDot schemes while significantly reducing decoding complexity by replacing high-degree univariate interpolation with structured lowdimensional interpolation.
-
These improved systems exhibit better memory locality and enable parallel decoding across tensor modes, making them well-suited for modern hardware architectures due to the tensorbased approach avoiding explicit unfolding.
Abstract
Large-scale signal processing systems, including aeronautical and aerospace platforms, increasingly rely on tensor operations, whose distributed execution is constrained by communication, memory, and latency bottlenecks. In this paper, we propose a tensor-aware coded computation framework for distributed mode-1 tensor--matrix multiplication that operates directly on tensor subtensors, avoiding explicit unfolding and preserving multi-dimensional structure. For a fixed partitioning configuration, the proposed tensor-PolyDot scheme achieves the same recovery threshold, communication cost, worker-side computation, and memory requirements as conventional matrix-based PolyDot schemes. However, by leveraging multivariate encoding, it replaces high-degree univariate interpolation at the fusion node with structured low-dimensional decoding. This leads to a substantial reduction in decoding complexity and latency, without affecting any other system metric. Additionally, the tensor-based approach improves memory locality and enables parallel decoding across tensor modes, making it well-suited to modern hardware architectures. Numerical results show decoding speedups proportional to the tensor partitioning factor, reaching up to an order-of-magnitude improvement in practical settings. These advantages make the proposed framework particularly relevant to latency-critical aeronautical and aerospace distributed signal processing systems.
Related papers
- Open-H-RF: A Large-Scale Ultrasound Raw Channel Dataset Initiative
- Scalable Attention for 5G NR Channel Estimation
- Low-Altitude Wireless Networks: A Comprehensive Survey
- Sensing-Assisted OFDM with Index Modulation: A Waveform for Optical Wireless Integrated Communication and Localisation
- Iteration-Free Candidate Pruning and an Index-Domain VLSI Architecture for Sort-Free MIMO Box Decoding up to 1024-QAM
- A Foundation Model for Large-Scale Wireless Network Planning, Operation and Optimization