Protocol-Flexible Custom NFC for Wire-Free Wearable Sensor Networks

arXiv:2609.23347 · cs.NI · Submitted 2026-09-20 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.

Tom: We're looking at the paper: "Protocol-Flexible Custom NFC for Wire-Free Wearable Sensor Networks".

Jane: Here's the gist of the paper. This study presents a custom near-field communication (NFC) system with software-defined protocol implementation for wearable sensors distributed across the body.

Tom: The proposed system combines a microcontroller unit with compact modulation and demodulation circuits, allowing medium access control and other communication protocols to be implemented in software.

Jane: Wearable sensors distributed over multiple body locations capture body-region-dependent information that single-point devices such as smartwatches cannot provide.

Tom: Conventional wired implementations can degrade wearability because of mechanical constraints, whereas radio-based wireless approaches such as Bluetooth are affected by body-induced signal attenuation and limited communication coverage.

Title and authors: Jane: The authors are Riku Maeda and Akihito Noda from Kochi University of Technology, and what's interesting about the title is that it really focuses on making something custom for wearable sensors distributed across the body. Tom Yeah, it sounds very specific to a problem where regular things like Bluetooth lose signal strength when you wear them, which this NFC approach tries to solve by using fabric-integrated meander coils.

Lu: What I find interesting is that they explicitly state their goal is protocol exploration rather than standard conformance with ISO/IEC fourteen thousand four hundred forty-three <ref:2609.23347#pg2>. That means they aren't just trying to make a standard NFC tag; they are building a platform where you can explore different communication protocols right there in the hardware design.

Meng: From an engineering standpoint, that flexibility is appealing because it means you can change things without needing new hardware every time you want to switch from one data format to another. But I wonder how much of that flexibility is actually practical when dealing with real-world signal noise on the body.

Lalam: Based on what I've processed, the paper sets up this custom system using a microcontroller unit and some modulation circuits, allowing medium access control and other communication protocols to be implemented in software rather than being hardwired into the silicon.

Jane: So, if I understand correctly, they are using the NFC physical layer but exposing it to an MCU so that you can implement anything from encoding schemes to MAC protocols in software? That's a big piece of information for someone who isn't deep in RF design.

The paper's summary: Tom: Well, they detail the hardware setup using an X-NUCLEO-NFC08A1 expansion board for the reader and an ATmega328P as the microcontroller for the tag. Jane That tells us exactly what kind of components they used to build this proof of concept.

Lu: The core communication mechanism involves a thirteen point five six megahertz carrier using amplitude-shift keying, which also supplies wireless power during reader-to-tag communication. Tom And for tag-to-reader, they use load modulation on a subcarrier to separate the weak tag response from that strong carrier generated by the reader.

Meng: The paper says this tag circuit uses a logical AND operation whose output drives an RF switch to toggle the antenna between an open and a terminated state, which is how they perform that load modulation. That sounds like it could be complex at scale when you have multiple sensors running at high rates.

Lalam: When we look at the performance, they verified continuous acquisition of three-axis acceleration data from three sensor tags distributed over the coil area using this setup. Jane So, they actually measured how fast this system could pull in motion data, and it's continuous acquisition for those three sensors.

Tom: They achieved a per-tag polling rate of two hundred twenty-two hertz and an effective throughput of about sixteen kilobytes per second across the whole system. Lu That means they got one hundred fifty-six valid samples per second from each tag, which is pretty high given the constraints of NFC.

The paper's improvements: Jane: One thing they highlight is the protocol flexibility—how exposing those baseband modulation and demodulation signals to an MCU lets you implement things like encoding schemes and MAC protocols in reconfigurable software instead of needing new hardware for every change. Tom That ability to swap out the MAC protocol just by changing a state machine in the MCU sounds like a huge win for adapting this system to different network needs.

Lu: They also show that they can explore different access methods, like "pre-assigned slotted access referenced to a synchronization beacon or random access with a software backoff counter," and that you don't need new hardware for those things too. Meng That level of software control over the communication strategy is what I'd look at if I were deploying this in production; it reduces the risk of needing physical firmware updates for every protocol tweak.

Tom: They also touch on how the polling interval, which they call Tslot, can be dynamically adjusted based on how many tags are active and what data throughput you actually need to achieve. Jane So, if you have more sensors or need faster data, the system can change its polling rate to optimize performance.

Lalam: They also analyze the link reliability by measuring the packet error rate against both the coupling distance and under static bending of the coil, which gives data that an AI could use to build predictive models for sensor network reliability under physical constraints like body movement.

Conclusion: Tom: So, to wrap up, this paper shows how you can extend NFC-based wearable sensing to high-rate motion monitoring applications that were previously difficult with fixed protocols. Jane It really proves that the flexibility of software definition in this custom NFC system lets you tailor the communication layer to your specific needs for body sensing.

Lu: What I think is that it moves us toward a system where the AI can dynamically adjust polling intervals or even predict communication failure points based on coupling and bending, which is a big step for robust sensor networks.

Meng: For deployment, the caveat they mention about the usable range shifting with tag position means an AI system would need to incorporate positional awareness to predict when communication might drop off due to body movement.

Lalam: I'm just going to say that this paper on "Protocol-Flexible Custom NFC for Wire-Free Wearable Sensor Networks" lays out a solid foundation by demonstrating how the physical layer principles can be leveraged for software-defined protocol implementation.

Riku Maeda, Akihito Noda

School of Systems Engineering, Kochi University of Technology

cs.NI

Submitted: 2026-09-20

Updated: 2026-09-20

Comments: 4 pages, 5 figures, 1 table. Accepted manuscript; accepted for publication in IEEE Sensors Letters

Journal ref: IEEE Sensors Letters, vol. 10, no. 11, Art. no. 5506104, Nov. 2026

DOI: 10.1109/LSENS.2026.3736589

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 67/100

The gist: This study presents a custom near-field communication (NFC) system with software-defined protocol implementation for wearable sensors distributed across the body.

Key concepts

Software-Defined Protocol Implementation
This means the rules for how data is sent and received (like encoding schemes or access methods) are written as software rather than being fixed in hardware. This flexibility allows the system to easily change communication strategies on the fly without needing new physical components.
NFC Physical Layer (ISO/IEC 14443)
This is the fundamental wireless technology used for communication, operating at 13.56 MHz. It handles the basic transmission and reception of data between a reader and a tag, which also provides wireless power to the tag.
Load Modulation
This is a specific technique used in tag-to-reader communication where the tag changes its electrical load on the carrier signal sent by the reader. This method allows for data transfer even when using simple modulation techniques.

Terminology

Summary

This study presents a custom near-field communication (NFC) system with software-defined protocol implementation for wearable sensors distributed across the body. p. 0 The proposed system combines a microcontroller unit with compact modulation and demodulation circuits, allowing medium access control and other communication protocols to be implemented in software. p. 0

Motivation for the System

Wearable sensors distributed over multiple body locations capture body-region-dependent information that single-point devices such as smartwatches cannot provide. Conventional wired implementations can degrade wearability because of mechanical constraints, whereas radio-based wireless approaches such as Bluetooth are affected by body-induced signal attenuation and limited communication coverage. p. 0 The proposed system is compatible with previously demonstrated fabric-integrated meander coils, which provides a feasible path toward garment-scale NFC communication areas. p. 0

Communication Mechanism

The proposed method is based on the NFC (ISO/IEC 14443) physical layer. Reader-to-tag communication uses a 13. p. 056 MHz carrier with amplitude-shift keying (ASK), which also supplies wireless power. p. 0 Tag-to-reader communication uses load modulation on a arXiv. p. 0 The subcarrier separates the weak tag response from the strong carrier generated by the reader. p. 1

Hardware Implementation Details

The hardware implementation involves an X-NUCLEO-NFC08A1 expansion board for the reader and an ATmega328P as the MCU for the tag. The tag circuit uses a logical AND operation whose output drives an RF switch, which toggles the antenna between an open and a terminated state to perform load modulation. p. 1 The UART hardware of the MCU generates and processes the modulation and demodulation waveforms. p. 1

Performance Metrics

Experimental results demonstrate continuous acquisition of three-axis acceleration data from three sensor tags, achieving a per-tag polling rate of 222 Hz and an effective throughput of approximately 16 kbps. The system delivers 156 valid samples per second per tag at a measured packet error rate of 30%. p. 0 The usable range depends on the number of tags as well as on the coupling. p. 2

Protocol Flexibility

The system allows for protocol exploration by exposing the baseband modulation and demodulation signals to an MCU so that the protocol can be implemented flexibly. Encoding schemes, MAC protocols, and error detection or correction can therefore be implemented in reconfigurable software. p. 1 A different MAC protocol requires only a change to the MCU state machine rather than new hardware. p. 1

Conclusion and Future Work

This work presented a protocol-flexible custom NFC system for wire-free wearable sensor networks. Future work includes improving link reliability, for which forward error correction and adapting the data rate to the coupling condition are the most direct options. p. 3 The present prototype is battery-powered on a rigid board, with the reader tethered to a host. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 The system supports polling six tags at 100 Hz or above in the limit where Tslot → Treply. p. 2 The study demonstrates that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications. p. 3 The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps. The result shows that NFC-based wearable sensing can be extended to high-rate motion-monitoring applications that have been difficult to address with conventional fixed-protocol NFC sensor tags. The present prototype is battery-powered on a rigid board, with the reader tethered to a host. The system delivers 156 valid samples per second per tag and approximately 11 kbps <ref:2609. p. 3

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Custom NFC system for wearable sensor networks allows for continuous acquisition of three-axis acceleration data from three tags at a polling rate of 222 Hz per sensor, delivering 156 valid samples per second per tag. This capability enables high-rate motion monitoring applications that were previously difficult to address with conventional fixed-protocol NFC sensor tags.

  2. Software-defined protocol implementation allows for reconfigurable encoding schemes and MAC protocols, including pre-assigned slotted access referenced to a synchronization beacon or random access with a software backoff counter, which can be implemented in software rather than requiring new hardware. This flexibility allows the AI system to adapt communication strategies based on real-time network conditions or required data rates.

  3. The system demonstrates that the per-tag polling rate for N tags is f = 1/(NTslot), and that the physical layer does not set this ceiling, suggesting that the AI can dynamically adjust the polling interval (Tslot) to optimize performance based on the number of active sensors and required data throughput.

  4. The link reliability analysis shows a dependency on coupling, stating the usable window also shifts with the tag position, implying that an AI system could incorporate positional awareness to predict communication failure points or autonomously reconfigure sensor placement for optimal signal reception.

  5. The system's ability to characterize the link by measuring the packet error rate against the coupling distance and under static bending of the coil provides data that can be fed into an AI model to build predictive models for sensor network reliability under varying physical constraints like body movement.

Sources

Related papers