Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities

arXiv:2609.13705 · eess.SP · Submitted 2026-09-12 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Channel Estimation for Movable Antenna Systems".

Dev: Here's the gist of the paper. Movable antenna (MA) systems are investigated as an efficient scheme to utilize degrees of freedom more efficiently in wireless networks by intelligently adjusting their positions to seek improved channel states.

Rosa: The paper systematically reviews tensor decomposition-based channel estimation for MA systems, which is motivated by the structured dependence of MA observations across space, time, and frequency.

Dev: Channel Model and Observation Structure The channel in MA systems is position-dependent because the antenna positions at the base station (BS) and mobile station (MS) can be adjusted within their local movement regions.

Rosa: The channel is characterized as Hk,m(r, t), where r and t denote the antenna position vectors.

Title and authors: Rosa: So we're looking at this paper called "Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities". It sounds pretty straightforward but it tackles a real problem in wireless networks where the antennas can actually move.

Dev: Yeah, it’s about how to figure out the channel when both the base station and the mobile station are moving around their local areas. The authors are looking at this because accurately figuring out that channel is hard when you're dealing with all those different degrees of freedom in space and time.

Taro: I wonder if they actually solve it for a whole system or just a small piece of it. I mean, when things are moving that much, the assumptions we make about the channel staying stable get pretty weak.

Rosa: That’s what they address by focusing on reconstructing the channel over those movement regions using only a limited number of measurements. It’s not about getting perfect data everywhere at once; it's about finding a way to use what you can measure to paint a picture of the whole moving channel structure.

Dev: Right, so the main idea is that because these antenna positions change, we have this structured dependence in our observations across space, time, and frequency that tensor decomposition methods are really well suited for.

Taro: I’m curious how they handle those different dimensions when they organize all the data into one big tensor. It sounds like a lot of moving parts to manage without it getting totally unmanageable.

The paper's summary: Rosa: Well, the core of the paper is that they set up a channel model that accounts for where both the base station and mobile station antennas are located because those positions can change within their local regions. They then organize all those received observations into a fourth-order tensor.

Dev: That’s right, so they take this movement-dependent channel model and turn the received signals into a tensor where each mode corresponds to something specific like the receive side after combining, the frequency dimension, time, and the transmit symbol.

Taro: So it's like taking all our measurements—which come from different antenna positions across space, different times in slots, and different frequencies—and stacking them up into this single high-dimensional structure. I can see how complex that data organization is going to be when you try to pull information out of it.

Rosa: Exactly, and under sparse multipath propagation conditions, this received tensor admits a low-rank canonical polyadic representation. This means they’re saying that even though the data looks complicated, it’s fundamentally low-rank and can be approximated by a sequence of factor matrices.

Dev: They use alternating least squares to estimate those factor matrices iteratively by breaking the problem down into a series of linear least squares subproblems. And they introduce something called structured canonical polyadic decomposition which specifically exploits the Vandermonde structure in the frequency and time dimensions to make that decomposition more accurate.

Taro: So they’re not just using standard tensor math; they are adding those specific structural constraints, like the Vandermonde structure, to guide how the iterative estimation happens. That sounds like a way to keep things from getting completely lost in noise during the calculation.

The paper's improvements: Rosa: The paper points out that tensor-based methods can actually get higher estimation accuracy than older methods like MUSIC and OMP because they preserve that multidimensional structure of the signals across space, time, and frequency.

Dev: That’s a big deal because conventional methods often flatten the received signal into a matrix form, which causes those important structural features to get aliased in those lower-dimensional matrices. Tensor decomposition keeps that structure intact.

Taro: I mean, if you only look at one antenna position or one time slot separately, you miss how all those things interact simultaneously when the system is actually moving. The tensor approach lets them see that coupling explicitly.

Rosa: And they show a direct comparison where the structured canonical polyadic decomposition performs better than alternating least squares when exploiting the intrinsic structure of this movable antenna signal model. It shows superior estimation accuracy and algorithmic stability in that specific context.

Dev: Now, looking at the computational side, they compare ALS and Structured Canonical Polyadic Decomposition. ALS has a complexity that scales linearly with the size of your signal data, which is pretty good for general problems.

Taro: But Structured Canonical Polyadic Decomposition has a complexity that scales cubically with the dimension of those factor matrices. That sounds like it could get really heavy when you have a lot of moving parts in the system.

Rosa: Right, but they also point out that the spatial smoothing step in SCPD can become a major computational bottleneck when those factor matrix dimensions get large because you're repeatedly applying selection matrices to unfolded observation matrices.

Conclusion: Dev: So to wrap up this paper on "Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities," the main conclusion is that the channel over the movement region can be reconstructed from finite measurements by exploiting that shared path structure among different movable antenna position pairs.

Rosa: Exactly. Tensor decomposition based algorithms show favorable accuracy and complexity characteristics compared to conventional estimation algorithms when dealing with this kind of structured dependence across space, time, and frequency. They organize the observations across antenna position, frequency, and time into a tensor form that supports factor matrix recovery followed by physical parameter extraction.

Taro: I just want to say that for future work, they suggest integrating SCPD with ALS by incorporating those Vandermonde structures directly into each iteration of ALS to reduce convergence time and mitigate noise perturbations. That would make the process much faster when you're trying to solve it in real time.

Dev: And looking ahead, they think expanding this framework could include joint channel and target parameter estimation for movable antenna systems so that you can extract communication multipath parameters at the same time as target distance, angle, and velocity.

Rosa: They also suggest research into near-field tensor models that incorporate spherical wavefronts because antennas are evolving toward higher frequency bands. It’s a lot of thinking about what's next for this technology.

Taro: I just think it’s cool that they focused on the limitations, like how spatial smoothing becomes the main bottleneck at large dimensions, because knowing where the system will struggle is just as important as knowing how it succeeds.

Dev: Yeah, so that’s our take on "Channel Estimation for Movable Antenna Systems: Challenges, Solutions, and Opportunities." It shows that tensor decomposition is a strong tool here for handling the complexity of moving antenna systems compared to older estimation approaches.

School of Information and Communication Engineering, Xi’an Jiaotong University · School of Cyber Science and Engineering, Xi’an Jiaotong University · Department of Electrical and Computer Engineering, Stevens Institute of Technology · School of Electronic and Optical Engineering, Nanjing University of Science and Technology · School of Integrated Circuits, Shanghai Jiao Tong University

eess.SP

Submitted: 2026-09-12

Updated: 2026-11-14

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 84/100

The gist: Movable antenna (MA) systems are investigated as an efficient scheme to utilize degrees of freedom more efficiently in wireless networks by intelligently adjusting their positions to seek improved…

Key concepts

Movable Antenna (MA) Systems
These are wireless systems where the antennas at the base station or mobile station can be moved within specific local regions. This movement allows for intelligent adjustment to seek better signal channels, making them efficient for wireless networks.
Tensor Decomposition
This mathematical tool is used to organize complex data from MA systems into a high-dimensional tensor. By decomposing this tensor, researchers can extract the underlying structural patterns of the channel across space, time, and frequency simultaneously.
Canonical Polyadic (CP) Representation
This is a low-rank representation for sparse multipath propagation. It describes how the received data tensor can be broken down into a product of simpler factor matrices. This structure allows for efficient estimation of the channel parameters from limited measurements.
Structured Canonical Polyadic Decomposition (SCPD)
SCPD is an advanced tensor decomposition method that specifically exploits known structures, like Vandermonde structures in frequency and time dimensions. This exploitation improves the accuracy and stability of channel estimation compared to standard ALS.

Terminology

Summary

Movable antenna (MA) systems are investigated as an efficient scheme to utilize degrees of freedom more efficiently in wireless networks by intelligently adjusting their positions to seek improved channel states. p. 0 The paper systematically reviews tensor decomposition-based channel estimation for MA systems, which is motivated by the structured dependence of MA observations across space, time, and frequency. p. 0

Channel Model and Observation Structure

The channel in MA systems is position-dependent because the antenna positions at the base station (BS) and mobile station (MS) can be adjusted within their local movement regions. The channel is characterized as Hk,m(r, t), where r and t denote the antenna position vectors. p. 1 This channel is given by Hk,m(r, t) = F(r, Θ)Σk,mG(t, Φ)T. p. 1 The received signals can then be given as Yk,m = Q(Hk,m(r, t)X+Nk,m). p. 1 When these observations are processed only in vector or matrix representations, their multidimensional coupling is not explicitly retained. p. 0

Estimation Framework and Challenges

The objective of MA channel estimation is to obtain the channel over the Tx and Rx movement regions rather than only for one fixed Tx-Rx configuration. Practical MA channel estimation acquires measurements only at a limited number of selected MA positions because directly measuring all candidate TxRx position pairs would introduce prohibitively large pilot overhead. p. 1 A two-stage Tx-Rx successive antenna movement pattern is adopted to avoid exhaustive traversal of all TxRx position pairs while collecting finite channel observations along both the Tx and Rx movement dimensions. p. 2 The difficulty arises from observation modeling and parameter extraction, as conventional methods flatten the received signal into a matrix form, causing structural features to become aliased in low-dimensional matrices. p. 2

Tensor Decomposition Methodology

The MA channel estimation is treated as a structured high-dimensional inference problem where tensors are naturally suited for this scenario. The received data are arranged into a fourth-order tensor whose modes correspond to the receive-side dimension after RF combining, the frequency dimension, the time dimension, and the transmit symbol dimension. p. 2 Under sparse multipath propagation, the received tensor admits a low-rank canonical polyadic (CP) representation Y ≈ PRr=1 ar ◦ br ◦ cr ◦ dr. p. 2 Alternating Least Squares (ALS) estimates the factor matrices in an iterative manner by decomposing the tensor into a sequence of linear LS subproblems. p. 3 Structured Canonical Polyadic Decomposition (SCPD) explicitly exploits the Vandermonde structure in frequency and time dimensions to improve decomposition accuracy. p. 3

Performance Comparison and Advantages

Tensor-based methods can achieve higher accuracy than MUSIC and OMP by preserving the multidimensional structure of the received signals. SCPD demonstrates superior estimation accuracy and algorithmic stability compared to ALS when exploiting the intrinsic structure of the MA signal model. p. 4 The computational complexity of ALS varies linearly with the signal size, while SCPD's complexity scales cubically with the dimension of the factor matrices.

Future Research Directions

Future research should focus on integrating SCPD with ALS by incorporating Vandermonde structures into each iteration of ALS to reduce convergence time and mitigate noise perturbations. Expansion of application scenarios includes joint channel and target parameter estimation for MA systems to concurrently extract communication multipath parameters along with target distance, angle, and velocity. p. 7 Research into near-field tensor models incorporating spherical wavefronts is necessary as antennas evolve toward higher frequency bands. p. 7

Conclusion

The article concludes that the channel over the movement region can be reconstructed from finite measurements by exploiting the shared path structure among different MA position pairs. Tensor decomposition-based algorithms exhibit favorable accuracy and complexity characteristics in this setting compared to conventional estimation algorithms. p. 7 The received observations across antenna position, frequency, and time dimensions can be organized into a tensor form that supports factor matrix recovery followed by physical parameter extraction. p. 7

Table I

| Category | Algorithm | Accuracy | Complexity | Applicability |

|---|---|---|---|---|

Tensor-based ALS High estimation accuracy, but may suffer from iterative instability. Low computational complexity, but iterative convergence is not always guaranteed O(QMSNsKMR). p. 5 p. 5 ALS is more general, whereas SCPD is structure-dependent. p. 5 p. 5 SCPD High estimation accuracy and capable of achieving super-resolution solutions. p. 5 p. 5 The complexity increases rapidly as the scale of signals increases O(k1k2KMQ2 BSNSl1l2R). p. 5 p. 5

Subspacebased MUSIC Relatively high estimation accuracy, but affected by the channel model and SNR. p. 5 p. 5 Relatively high computational complexity O(K2QMSNsM + G2K + K3). p. 5 p. 5 Moderate generality. p. 5 p. 5 CS-based OMP Relatively low estimation accuracy, affected by the channel model, SNR, RIP conditions, and grid accuracy. p. 5 p. 5 High computational complexity O(RGQMSNsKM). p. 5 p. 5 Weak generality. p. 5 p. 5

| In contrast, SCPD forms a spatially smoothed matrix by repeatedly applying selection matrices to the unfolded observation matrix for multiple overlapping subarrays. p. 5 p. 5 As the factor matrix dimensions increase, both the number of such selection matrix multiplications and the sizes of the resulting submatrices increase. p. 5 p. 5 Spatial smoothing therefore becomes the main computational bottleneck at large dimensions. p. 5 p. 5 |

Fig. 4

NMSE of the rebuilt MA channel versus SNR for tensor-based and conventional estimation algorithms. It can be observed that as the signal-tonoise ratio (SNR) increases, the normalized mean squared error (NMSE) of the SCPD algorithm decreases, demonstrating the best estimation accuracy. p. 6 In contrast, OMP and MUSIC exhibit inferior performance. p. 6 This is because the successful channel reconstruction by OMP algorithm requires the system model to satisfy the RIP condition. p. 6

Fig. 5

Runtime versus the number of subcarriers for tensor-based and conventional estimation algorithms. It can be observed that the ALS algorithm exhibits the lowest runtime in most scenarios. p. 6 The runtimes of MUSIC and OMP algorithms increase slightly with the number of subcarriers, whereas the runtime of the SCPD algorithm increases rapidly. p. 6

Fig. 3

Tensor-based MA channel estimation framework that constructs a multidimensional tensor and recovers channel parameters for channel reconstruction. This representation characterizes the distinctive position-dependent behavior of MA channels. p. 1 The uniqueness condition requires that the Kruskal ranks of the factor matrices satisfy kA + kB + kC + kD ≥ 2R + 3. p. 5 ALS exhibits stronger applicability because it does not impose specific structural requirements on the factor matrices and can be applied to general CP decomposition problems. p. 5 The main differences among representative channel parameter estimation methods for MA systems are summarized in Table I. p. 5

REFERENCES

[1] X. Gao, L. Dai, and A. p. 7 M. Sayeed, “Low RF-complexity technologies to enable millimeter-wave MIMO with large antenna array for 5G wireless communications,” IEEE Commun. p. 7 Mag., vol. 56, no. 4, pp. 211–217, Feb. p. 7 2018 <ref:2609. p. 013705#pg6>

[2] W. Ma, L. Zhu, and R. p. 7 Zhang, “Compressed sensing based channel estimation for movable antenna communications,” IEEE Commun. p. 7 Lett., vol. 27, no. 10, pp. 2747–2751, Oct. p. 7 2023 <ref:2609. p. 013705#pg6>

[3] K.-K Wong, A. Shojaeifard, K. p. 7-F Tong, and Y. p. 0 Zhang, “Fluid antenna systems,” IEEE Trans. p. 7 Wireless Commun. p. 7 p. 7 p. 7 p. 7 p. 7, vol. 20, no. 3, pp. 1950–1962, Mar. p. 7 2021 <ref:2609. p. 013705#pg6>

[4] L Zhu, W Ma, and R Zhang, “Movable antennas for wireless communication: Opportunities and challenges,” IEEE Commun. Mag., vol. 62, no. 6, pp. 114–120, Jun. p. 7 2024 <ref:2609. p. 0 p. 013705#pg6>

[5] W Ma, L Zhu, and R Zhang, “Movable antenna enhanced wireless sensing via antenna position optimization,” IEEE Trans. Wireless Commun., vol. 23, no. 11, pp. 16 575–16 589, Nov. p. 7 2024 <ref:2609.13705#pg6>

[6] L Hu, Z Tan, Z Jing, C Huang, L Chen, S Yang, and L Li, “5-D bayesian tensor factorization for angle estimation in movable antenna communications,” IEEE Trans. Veh. Tech., vol. 74, no. 12, pp. 18 942–18 957, Dec. p. 7 2025 <ref:2609. p. 013705#pg6>

[7] R Zhang, L Cheng, S Wang, Y Lou, Y Gao, W Wu, and D W K Ng, “Integrated sensing and communication with massive MIMO: A unified tensor approach for channel and target parameter estimation,” IEEE Trans. Wireless Commun., vol. 23, no. 8, pp. 8571–8587 <ref:2609. p. 713705#pg6>

[8] L Chen, Z Li, Z Su, L Chen, R Zhang, G Chen, and W Chen, “Tensor-based dynamic channel estimation for mmwave movable antenna MIMO systems,” in ICC 2026 - IEEE International Conference on Communications <ref:2609.13705#pg6>

[9] R Zhang, L Cheng, W Zhang, X Guan, Y Cai, W Wu, and R Zhang, “Channel estimation for movable-antenna MIMO systems via tensor decomposition,” IEEE Wireless Commun. Lett., vol. 13, no. 11, pp. 3089–3093 <ref:2609. p. 713705#pg6>

[10] M Sørensen and L De Lathauwer, “Blind signal separation via tensor decomposition with vandermonde factor: Canonical polyadic decomposition,” IEEE Trans. Signal Process. p. 7, vol. 61, no. 22, pp. 5507–5519 <ref:2609. p. 713705#pg5>

[11] L Zhu, W Ma, W Mei, Y Zeng, Q Wu, B Ning, Z Xiao, X Shao, J Zhang, and R Zhang, “A tutorial on movable antennas for wireless networks,” IEEE Commun. Surv. & Tutorials <ref:2609. p. 013705#pg6>

[12] L Zhu, W Ma, and R Zhang, “Modeling and performance analysis for movable antenna enabled wireless communications,” IEEE Trans. Wireless Commun., vol. 23, no. 6, pp. 6234–6250 <ref:2609. p. 713705#pg6>

[13] Z Xiao, S Cao, L Zhu, Y Liu, B Ning, X.-G Xia, and R Zhang, “Channel estimation for movable antenna communication systems: A framework based on compressed sensing,” IEEE Trans. p. 7 Wireless Commun., vol. 23, no. 9, pp. 11 814–11 830 <ref:2609. p. 713705#pg6>

[14] Z Zhou, J Fang, L Yang, H Li, Z Chen, and R S Blum, “Lowrank tensor decomposition-aided channel estimation for millimeter wave MIMO-OFDM systems,” IEEE J. Sel. Areas Commun. p. 7, vol. 35, no. 7, pp. 1524–1538 <ref:2609. p. 713705#pg5>

| Category | Algorithm | Accuracy | Complexity | Applicability |

|---|---|---|---|---|

Tensor-based ALS High estimation accuracy, but may suffer from iterative instability. Low computational complexity, but iterative convergence is not always guaranteed O(QMSNsKMR). ALS is more general, whereas SCPD is structure-dependent. SCPD High estimation accuracy and capable of achieving super-resolution solutions. The complexity increases rapidly as the scale of signals increases O(k1k2KMQ2 BSNSl1l2R).

Subspacebased MUSIC Relatively high estimation accuracy, but affected by the channel model and SNR. Relatively high computational complexity O(K2QMSNsM + G2K + K3). Moderate generality. CS-based OMP Relatively low estimation accuracy, affected by the channel model, SNR, RIP conditions, and grid accuracy. High computational complexity O(RGQMSNsKM). Weak generality.

| In contrast, SCPD forms a spatially smoothed matrix by repeatedly applying selection matrices to the unfolded observation matrix for multiple overlapping subarrays. As the factor matrix dimensions increase, both the number of such selection matrix multiplications and the sizes of the resulting submatrices increase. Spatial smoothing therefore becomes the main computational bottleneck at large dimensions.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Structural exploitation of high-dimensional data allows for improved estimation accuracy because tensor decomposition-based method can achieve higher estimation accuracy than conventional parameter estimation approaches. This means the system can more accurately determine channel parameters by preserving the high-dimensional structure of received signals across spatial, time, and frequency domains.

  2. Enhanced computational efficiency is achieved by structuring the problem to avoid complex iterative searches; for instance, tensor decomposition-based algorithms avoid the repeated multiplication between the sparse dictionary matrix and the received signal matrix during iterative atom selection. This allows for faster processing compared to conventional methods like OMP which require constructing an overcomplete dictionary and performing iterative atom selection.

  3. Integration of structural constraints improves convergence speed; by incorporating Vandermonde structures into ALS iterations, the feasible solution space is reduced, guiding the iterations toward the true parameter values more rapidly and thereby significantly decreasing the number of iterations needed for convergence. This leads to faster channel acquisition in real-time movable antenna systems.

  4. The system can perform joint channel and target parameter estimation by constructing a unified received tensor that simultaneously incorporates communication signals and sensing echoes. This enables concurrent extraction of communication multipath parameters along with target distance, angle, and velocity for integrated sensing and communication applications.

  5. The framework supports the design of joint waveform and movement design to optimize pilot waveforms and antenna trajectories to enhance both sensing and communication performance in a trade-off manner. This allows for optimized system operation based on the specific requirements of the application.

Related papers