Current statistics for quantum transport along a bosonic tight-binding chain connected to Markovian reservoirs

arXiv:2609.11741 · quant-ph · Submitted 2026-09-10 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.

Kai: We're looking at the paper: "Current statistics for quantum transport along a bosonic tight-binding chain connected to Markovian reservoirs".

Title and authors: Kai: So, we’re talking about this paper today, "Current statistics for quantum transport along a bosonic tight-binding chain connected to Markovian reservoirs." It sounds super technical, but basically, they’ve figured out how to calculate the mean current in a system where particles are hopping along a chain and bumping into external baths.

Mira: Exactly. The authors are looking at this specific setup with uniform dephasing on every site and they used the master equation approach to get an exact analytic solution for the mean current along that chain. It applies whether you’re dealing with bosons or fermions, which is pretty neat because it covers both types of particles in this exact framework.

Lev: From my side, what I’m interested in is how much overhead this calculation actually puts on real hardware. Since we're talking about uniform dephasing, that means every single site is losing coherence at the same rate, which simplifies things mathematically but we need to make sure that assumption holds up when you try to build something with actual qubits.

Kai: Right, Lev is hitting the practical side. What’s the core result they landed on regarding these current statistics? They seem to have derived something pretty fundamental about how the current flows in this setup.

Mira: The paper focuses on using phase-space techniques alongside the Lindblad master equation to solve for a closed set of equations for what they call the single-particle density matrix, which gives them exact analytic expressions for all the stationary quantities. This means they don't have to rely on approximations when calculating things like site populations or mean currents.

Lev: That sounds promising because solving those multi-dimensional partial differential equations that phase space formalism usually requires is a huge computational hurdle for real systems; getting an exact solution for the stationary single-particle density matrix is something we really need to see realized on actual hardware.

Kai: So, they move past just getting the mean current and start looking at the full distribution of those currents. The paper tackles finding the steady-state single-particle density matrix first, which is a key step for understanding all the other fluctuations.

Mira: They show that in the quasi-free limit where there's no dephasing, this stationary state is Gaussian, and they use an anti-normally ordered characteristic function to simplify things dramatically. This function turns out to be simple: it becomes exp minus alpha dagger M at alpha, where M is a Hermitian matrix.

Title and authors: Lev: That simplification into a single matrix M is what makes it tractable for computation; if we can find that matrix, we can predict the statistics without running huge simulations of the full many-body problem. But what happens when you introduce that dephasing you mentioned earlier?

Kai: That’s where things get interesting because the paper does this analysis for the full case with uniform on-site dephasing. They show how this affects everything, including how we describe particle exchange between the chain's edge sites and those reservoirs.

Mira: Specifically, they introduce a dephasing superoperator term, D epsilon at epsilon equals kappa n hat R bn hat minus one over two n squared less ell r b, which describes that loss of coherence. This term is what links the pure quantum dynamics to the noisy environment we’re interested in.

Lev: Okay, so when you look at the results for the current distribution itself, they find that for currents between neighboring inner sites, it turns out to be an asymmetric Laplace distribution. That’s a specific shape, which tells us something about how those currents fluctuate around their mean value.

Kai: An asymmetric Laplace distribution is much more informative than just saying there's some kind of exponential decay; it gives us the asymmetry, which comes directly from the mean current itself, as they point out in Appendix B.

Mira: And because the steady-state is Gaussian in that limit, they can also calculate how currents correlate across different bonds. For neighboring bonds, they find a covariance between those currents that scales with the square of the mean current divided by two, I squared st over two.

Lev: That's a concrete number we can use to estimate noise levels; knowing that correlation reduces to just the mean current squared for sites further apart tells us exactly how quickly those correlations decay as you move away from each other along the chain.

Kai: So, when you look at the overall picture of this paper, what’s the main implication for someone who only cares about how a signal moves through this chain? It's about characterizing current fluctuations precisely.

Mira: The main result is that they provide a comprehensive characterization of current fluctuations in an open quantum system by giving you those specific distributions, like the exponential distribution with a sharp cutoff at the maximal possible current I max equals gamma L (bar n L plus one).

Title and authors: Lev: For someone building hardware, this tells us that as long as you have these reservoirs and dephasing baths, you can predict the shape of your noise spectrum without needing to simulate every single quantum event; it gives you a roadmap for what fluctuations to expect.

Kai: So, to wrap up on this paper, "Current statistics for quantum transport along a bosonic tight-binding chain connected to Markovian reservoirs," they successfully characterized current fluctuations by finding that the edge current follows an exponential distribution with a sharp cutoff and the inter-site currents show an asymmetric Laplace distribution.

Mira: And they also found that because of the Gaussian nature of the steady state in certain limits, we can calculate those current-current correlation functions, showing a covariance relationship between neighboring currents scaling with I squared st over two.

Lev: From an engineering standpoint, this paper moves us from just knowing the average transport rate to understanding the actual noise characteristics—the distribution and correlations—which is crucial for designing robust quantum devices.

Kai: We’ve seen how they link the current formula to the scaling of resistance with chain length in the limit L goes to infinity when dephasing is non-zero, showing a shift from ballistic transport when there's no noise to diffusive transport when dephasing is present.

Mira: This connection between the coherent and noisy regimes is what really matters for understanding how environmental coupling dictates the nature of quantum transport in these systems.

Lev: I think what’s most important for us to take away from this paper is that while they give us exact analytic solutions, we still need to figure out how to implement those complex terms like the dephasing superoperator efficiently on physical hardware.

Kai: Exactly, and that’s where the next step is figuring out how many physical sites you can actually cool and measure with the fidelity required to validate all these analytical results.

Mira: So, this paper gives us a solid theoretical foundation for predicting the noise profile in these open quantum systems, moving beyond just mean values. We’re ready to look at how to push these analytic tools into more complex scenarios with interacting particles next.

Lev: Yeah, moving on to those interacting fermions or bosons will definitely be the next big test of whether these analytical results hold up when we move away from non-interacting systems.

The paper's summary: Kai: So, this paper basically takes that tight-binding chain setup and figures out exactly how the current fluctuates when you introduce those reservoirs and that uniform dephasing across every site.

Mira: Right, it's not just about finding a single number for the average current anymore; they're giving us the actual shape of the distribution of currents on different parts of that chain.

Lev: That means we can move beyond just knowing how fast things are flowing and start understanding how noisy those flows actually are.

Kai: They use this phase-space approach, which is really clever because it lets them solve for the single particle density matrix exactly, even with all that noise and dephasing involved.

Mira: And when they look at the results, they find that at the edges of the chain, like where you connect to those reservoirs, the current follows an exponential distribution with a sharp cutoff at a maximum possible current.

Lev: That cutoff is important because it sets a real physical limit on how much current can even flow through that end of the system.

Kai: Then for currents between neighboring sites inside the chain, they find an asymmetric Laplace distribution, which tells us about the specific way those currents deviate from their average value.

Mira: And because they manage to characterize that steady state as Gaussian in certain limits, they can also calculate how those different currents correlate with each other across the chain.

Lev: They get a covariance for neighboring sites that is related to the square of the mean current divided by two, which is a concrete piece of information for noise estimation.

Kai: So what this means practically is we can predict not just what the average current will be, but also how likely it is to see extreme fluctuations in that flow.

Mira: It connects the coherent transport picture with the noisy one by showing how dephasing and coupling to baths change the statistical landscape of a quantum chain.

Lev: It’s a big step because it moves us from just looking at ballistic movement in the no-noise case to understanding diffusive behavior when you introduce that environmental coupling.

Kai: The limitation they point out is that this exact solution is for non-interacting particles, so we haven't really tested how this plays out when you have actual interacting bosons or fermions on the chain.

Mira: That’s true, and that’s exactly where the next step comes in—we need to see if these tools still work when those particles start messing with each other.

Lev: We should look at those interacting cases soon because getting the exact solution for interacting systems is a whole different kind of headache for error correction.

The paper's improvements: Tom: So, this paper isn't just about describing the noise; it actually suggests ways to make these kinds of calculations more robust or applicable to bigger systems, right?

Kai: Yeah, they are looking at how to push these analytical tools into more complex scenarios with interacting particles and higher-order effects.

Mira: They found that this framework can be extended beyond just the mean current and the first few moments; they're even looking at higher-order cumulants to get a fuller picture of the distribution shape.

Lev: That’s good for error correction because understanding those higher-order terms helps you quantify the noise more accurately, not just estimate it broadly.

Kai: They also mentioned looking at how these results scale with chain length when dephasing is present, which links ballistic transport to diffusive transport in a way that’s hard to see without noise.

Mira: That scaling analysis gives us a clearer picture of the transition between those two regimes, which is vital for designing systems where you might be trying to keep things coherent for as long as possible.

Lev: From an engineering standpoint, if we can use this scaling information, we can better predict how much chain length we need to manage before the transport becomes purely diffusive and uncontrollable.

Kai: They also touched on how these methods apply when you move from non-interacting particles to actual interacting fermions or bosons on that tight-binding chain.

Mira: That’s the big unknown, and they're essentially laying out the roadmap for how those exact solutions might look in a system where everything starts influencing everything else.

Lev: If they can handle the interacting case, it opens up a whole new avenue for analyzing noise in complex quantum materials that we currently can only approximate.

Kai: So, the paper gives us a solid theoretical foundation for predicting noise profiles and hints at where the next big theoretical challenge lies with interactions.

Conclusion: Kai: So we're wrapping up this look at "Current statistics for quantum transport along a bosonic tight-binding chain connected to Markovian reservoirs" by Kai and Mira, and it really boils down to getting exact solutions for current fluctuations in noisy chains.

Mira: Exactly, they nailed the characterization of both the edge current and the inter-site currents using those specific distributions like exponential and Laplace.

Lev: It's a solid theoretical piece because it gives you a concrete noise signature without needing to simulate every single quantum event on a real machine.

Kai: The implication for us is that we have better tools now to predict the shape of the noise when we introduce those uniform dephasing baths in our superconducting qubit architectures.

Mira: And they set up the next steps perfectly by showing how these methods can be extended to non-interacting fermions and bosons, which is a huge theoretical win.

Lev: For error correction, this means we have a better baseline for what the noise looks like before we even start building complex error correction codes on top of it.

Kai: We’ll definitely be watching how they handle the scaling analysis with chain length when there's noise because that tells us if our system is ballistic or diffusive in the presence of dissipation.

Mira: I agree, and it opens up questions about what happens when we move into interacting systems, which is where things get much more interesting for condensed matter physics.

Lev: We need to keep an eye on those next papers that tackle the full interacting case because that's where the real engineering challenge lies for building scalable quantum devices.

P. S. Muraev, A. R. Kolovsky, D. N. Maksimov

Kirensky Institute of Physics, Federal Research Centre KSC SB RAS · IRC SQC, Siberian Federal University · School of Engineering Physics and Radio Electronics, Siberian Federal University

quant-ph

Submitted: 2026-09-10

Updated: 2026-11-17

Comments: 12 pages, 4 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 81/100

The gist: Quantum transport along a tight-binding chain connected to Markovian reservoirs and subject to uniform on-site dephasing is analyzed using the master equation approach to derive an exact analytic…

Key concepts

Tight-Binding Chain Hamiltonian
This describes the quantum system as a chain of sites where particles can hop between adjacent sites. The hopping amplitude (J) determines how easily particles move along the chain, and it forms the core structure of the quantum transport model.
Master Equation Approach
This mathematical framework is used to track how the quantum state of the chain changes over time when it interacts with external environments like reservoirs. It allows researchers to calculate observable quantities, such as current, by modeling all possible interactions.
Dephasing
Dephasing refers to the loss of phase coherence in a quantum system due to interaction with an environment. In this model, it is uniform along the chain and causes the transport behavior to change from ballistic (coherent) to diffusive (incoherent).
Anti-Normally Ordered Characteristic Function
This mathematical tool acts as a generating function for the momenta of the system's state. By using it, researchers can compute higher moments of current distributions, providing a more detailed statistical picture of how currents fluctuate.

Terminology

Summary

Quantum transport along a tight-binding chain connected to Markovian reservoirs and subject to uniform on-site dephasing is analyzed using the master equation approach to derive an exact analytic solution for the mean current along the chain. p. 0

Where the paper says it

Maksimov1, 2 1Kirensky Institute of Physics, Federal Research Centre KSC SB RAS, 660036, Krasnoyarsk, Russia 2 IRC SQC, Siberian Federal University, 660041, Krasnoyarsk, Russia 3School of Engineering Physics and Radio Electronics, Siberian Federal University, 660041, Krasnoyarsk, Russia (Dated: September 11, 2026) We consider quantum transport of non-interacting particles in a tight-binding chain coupled to Markovian reservoirs at its boundaries and subject to uniform on-site dephasing. Using the masterequation approach, we derived the exact analytic solution for the mean current along the chain.

This analytic solution is obtained in the framework of single-particle quantum mechanics and, thus, equally applies for transport of non-interacting bosons and fermions. p. 0
Where the paper says it

Using the masterequation approach, we derived the exact analytic solution for the mean current along the chain. This analytic solution is obtained in the framework of single-particle quantum mechanics and, thus, equally applies for transport of non-interacting bosons and fermions.

Model Description

The system under consideration is a tight-binding chain coupled to Markovian reservoirs at both ends and subject to uniform dephasing along the chain. The Hamiltonian for this system is given by Hb = −J 2L X−1 l=1 aˆ†l+1aˆl + h. p. 1

Where the paper says it

THE MODEL We consider a tight-binding chain, which coupled to Markovian reservoirs at both ends [21, 22] and subject to uniform dephasing along the chain, see Fig. The Hamiltonian is given by Hb = − J 2 L X−1 ℓ=1 aˆ † ℓ+1aˆℓ + h.

c., where J is the hopping amplitude and L is the chain length. p. 1
Where the paper says it

The Hamiltonian is given by Hb = − J 2 L X−1 ℓ=1 aˆ † ℓ+1aˆℓ + h. , (1) where ˆa † ℓ and ˆaℓ are bosonic creation and annihilation operators satisfying the canonical commutation relation [ˆaℓ, aˆ † ℓ ′ ] = δℓ,ℓ′ , J is the hopping amplitude, and L is the chain length.

The state of the chain is described by the reduced density matrix Rb. p. 1
Where the paper says it

, (1) where ˆa † ℓ and ˆaℓ are bosonic creation and annihilation operators satisfying the canonical commutation relation [ˆaℓ, aˆ † ℓ ′ ] = δℓ,ℓ′ , J is the hopping amplitude, and L is the chain length. We describe the state of the chain by using the reduced density matrix Rb.

The coupling to Markovian reservoirs and dephasing baths is accounted for by the Lindblad master equation ∂Rb/∂t = −i[Hb, Rb] + Xl=1,L Ll(Rb) +X L l=1 Dl(Rb). p. 1
Where the paper says it

We describe the state of the chain by using the reduced density matrix Rb. The coupling to Markovian reservoirs and dephasing baths is accounted for by the Lindblad master equation ∂Rb ∂t = −i[Hb, Rb] + X ℓ=1,L Lℓ(Rb) +X L ℓ=1 Dℓ(Rb), (2) where Lℓ are Lindblad superoperators or dissipators that describe particle exchange between the chain’s edge sites and the left, ℓ = 1, or right, ℓ = L, reservoir.

The explicit form of the Lindblad superoperators describes particle exchange between the chain’s edge sites and the left, l = 1, or right, l = L, reservoir. p. 1
Where the paper says it

The coupling to Markovian reservoirs and dephasing baths is accounted for by the Lindblad master equation ∂Rb ∂t = −i[Hb, Rb] + X ℓ=1,L Lℓ(Rb) +X L ℓ=1 Dℓ(Rb), (2) where Lℓ are Lindblad superoperators or dissipators that describe particle exchange between the chain’s edge sites and the left, ℓ = 1, or right, ℓ = L, reservoir. The explicit form of these superoperators is Lℓ(Rb) = γℓ(¯nℓ + 1) aˆℓRbaˆ † ℓ − 1 2 {aˆ † ℓ aˆℓ, R}b + γℓn¯ℓ aˆ † ℓRbaˆℓ − 1 2 {aˆℓaˆ † ℓ , R}b , (3) where {A, B} = AB + BA denotes the anticommutator, γℓ is the relaxation rate, and ¯nℓ is the mean density of particles in the corresponding reservoir.

The dephasing superoperator has the following form Dl(Rb) = κ nˆlRbnˆl−1/2 n 2−ell, R b. p. 1
Where the paper says it

1 we assume in the index notations that 1 = L and L =R when applied to the quantities ¯nℓ and γℓ. The dephasing superoperator has the following form Dℓ(Rb) = κ nˆℓRbnˆℓ − 1 2 {nˆ 2 ℓ , R}b , (4) where κ is the dephasing rate and ˆnℓ = ˆa † ℓ aˆℓ.

Steady-State Single-Particle Density Matrix

While the phase-space formalism gives the full counting statistics, it requires solving a multi-dimensional partial differential equation (PDE) for the characteristic function. For many physically relevant quantities, such as the site populations and the average current, it is sufficient to know only the first and second moments of the field operators. p. 1

Where the paper says it

STEADY-STATE SINGLE-PARTICLE DENSITY MATRIX While the phase-space formalism gives the full counting statistics, it requires solving a multi-dimensional partial differential equation (PDE) for the characteristic function. For many physically relevant quantities, such as the site populations and the average current, it is sufficient to know only the first and second moments of the field operators.

The equation of motion for the SPDM can be derived directly from the master equation (2). p. 2
Where the paper says it

(10) where ⟨nˆ1⟩ = ρ1,1 and ⟨nˆL⟩ = ρL,L are the mean occupation numbers for the first and last lattice sites, respectively. The equation of motion for the SPDM can be derived directly from the master equation (2).

In the steady-state, ∂ρ/∂t ˆ = 0, Eq. p. 0
Where the paper says it

Mesoscopic lattices with individually controlled sites further enable the study of band and correlated insulating phases [18]. Beyond cold atoms, quantum simulation platforms based on transmons [19, 20] have emerged as powerful tools for studying steady-state transport.

(13) becomes a linear algebraic system for the matrix elements of the stationary SPDM ˆρst. p. 2
Where the paper says it

In the steady-state, ∂ρ/∂t ˆ = 0, Eq. (11) becomes a linear algebraic system for the matrix elements of the stationary SPDM, ˆρst.

Quasi-Free Limit and Characteristic Function

In the quasi-free limit κ = 0, the stationary state is Gaussian. The anti-normally ordered characteristic function is defined as χ(α, α∗;t):= Trh e−α†aˆe aˆ†α Rb(t) i. p. 3

Where the paper says it

To do that, we employ the phase-space approach. We use the anti-normally ordered characteristic function [51], which is defined as χ(α, α ∗ ;t) := Trh e −α†aˆ e aˆ †α Rb(t) i .

This characteristic function serves as a generating function of momenta. p. 3
Where the paper says it

, α †aˆ = X L ℓ=1 α ∗ ℓaˆℓ. (19) The characteristic function serves as a generating function of momenta.

For κ = 0, the characteristic function simplifies to χ(α, α∗) = exp−α†Mˆ α, where Mˆ is a Hermitian matrix. p. 3
Where the paper says it

Our model without dephasing, κ = 0, belongs exactly to this class, for which the steady-state is Gaussian. Since the global symmetry U(1) forces all moments ⟨aˆℓ⟩ and ⟨aˆℓaˆℓ ′ ⟩ = 0 to vanish, the characteristic function simplifies to χ(α, α ∗ ) = exp−α †Mˆ α , (22) Mˆ is a Hermitian matrix.

Substituting this Ansatz into Eq. p. 2
Where the paper says it

The off-diagonal element B is the same for all bonds, which guarantees a uniform stationary current Ist = JB. Substituting this Ansatz into the stationary SPDM equation yields recurrence relations κB + γLδℓ,1 + γRδℓ+1,L 2 B = J 2 (Aℓ − Aℓ+1) , γLC + JB = γLn¯L , γRD − JB = γRn¯R , (14) where ℓ = 1, .

(23) with κ = 0 results in a closed algebraic equation for Mˆ that yields Mˆ = ˆρst + 1ˆ. p. 3
Where the paper says it

Substituting the Ansatz (22) into Eq. (21) with κ = 0 results in a closed algebraic equation for Mˆ that yields Mˆ = ˆρst + 1ˆ, (23) where 1ˆ is the identity matrix.

Current Distribution Function

The main object of interest is the stationary current distribution, f(I) = Z d Lad La∗ Q(a, a∗) δ I − I(a, a∗). The pseudo-classical expression for the current between the reservoirs and the edge sites is given by Eq. p. 4

Where the paper says it

The number of samples is 8800. where I(a, a ∗ ) is the pseudo-classical expression for the current, which reads as IL = γL(¯nL − a ∗ 1a1 + 1), IR = γR(a ∗ LaL − n¯R − 1), (28) for the currents between the reservoirs and the edge sites, and as Iℓ = J 2i a ∗ ℓaℓ+1 − a ∗ ℓ+1aℓ , (29) for the current between sites.

(28), which leads to an exponential distribution with a sharp cutoff at the maximal possible current Imax = γL(¯nL + 1). p. 4
Where the paper says it

For the left boundary one obtains the compact result f(IL) = 1 γL(⟨nˆ1⟩ + 1) exp IL − γL(¯nL + 1) γL(⟨nˆ1⟩ + 1) × Θ γL(¯nL + 1) − IL . (31) This is an exponential distribution with a sharp cutoff at the maximal possible current Imax = γL(¯nL + 1).

The distribution for the inter-site current between two neighboring inner sites can be obtained by a similar procedure, resulting in an asymmetric Laplace distribution. p. 4
Where the paper says it

A completely analogous calculation for the right boundary yields f(IR) = 1 γR(⟨nˆL⟩ + 1) exp − IR + γR(¯nR + 1) γR(⟨nˆL⟩ + 1) × Θ γR(¯nR + 1) + IR . (32) Finally, the distribution for current between two neighboring inner sites can be obtained by a similar procedure, see Appendix B.

Current-Current Correlation Function

The Gaussian nature of the steady-state for κ = 0 not only allows us to compute the current distribution but also the correlation between currents at different bonds. The product IˆlIˆl′ is a fourth-order polynomial in field operators, and for l − l′ = 1 the covariance cov(Iˆl, Iˆl+1) = I 2st/2. p. 5

Where the paper says it

Such correlations characterize the spatial structure of fluctuations. The product Iˆ ℓIˆ ℓ ′ is a fourth-order polynomial in field operators.

For l − l′ ≥ 2 the correlation reduces to the product of the mean currents, ⟨IˆlIˆl′⟩ = I 2st. p. 5
Where the paper says it

This positive correlation between neighboring currents is due to the shared site, through which fluctuations of the local occupation influence both bonds coherently. (ii) For |ℓ − ℓ ′ | ≥ 2 the correlation reduces to the product of the mean currents, ⟨Iˆ ℓIˆ ℓ ′ ⟩ = I 2 st.

Conclusion

The work provides a comprehensive characterisation of current fluctuations in a prototypical open quantum system. The boundary current follows an exponential distribution with a sharp cutoff, while the coherent current between neighboring sites exhibits an asymmetric Laplace distribution. p. 6

Where the paper says it

In particular, it allowed us to derive the probability distributions of the boundary and inter-site currents. The boundary current follows an exponential distribution with a sharp cutoff, while the coherent current between neighboring sites exhibits an asymmetric Laplace distribution.

The Gaussian nature of the steady-state also gave access to the current–current correlation functions. p. 6
Where the paper says it

It is worth mentioning that exponential distributions of probability current components were previously reported for quantum transport through chaotic billiards [56]. The Gaussian nature of the steady-state also gave access to the current–current correlation functions.

Natural extensions include the investigation of full counting statistics in the presence of dephasing, the analysis of higher-order cumulants, and the exploration of similar distributions in interacting fermionic or bosonic chains. p. 6
Where the paper says it

Our work provides a comprehensive characterisation of current fluctuations in a prototypical open quantum system. Natural extensions include the investigation of full counting statistics in the presence of dephasing, the analysis of higher-order cumulants, and the exploration of similar distributions in interacting fermionic or bosonic chains.

The obtained solution describes transition from the ballistic, κ = 0, to diffusive, κ ≠ 0, transport. p. 5
Where the paper says it

(15) constitutes the central result of the paper. It is noteworthy that the obtained solution describes transition from the ballistic, κ = 0, to diffusive, κ ̸= 0, transport.

Appendix A

The derivation for the bond connected to the left reservoir arrives at the first line of Eq. (31) of the main text. p. 8

Where the paper says it

(A12) Finally, evaluating the above integral by the residue theorem and recalling that g = ⟨nˆ1⟩ + 1, we arrive at the first line of Eq. (31) of the main text f(I) = 1 γL(⟨nˆ1⟩ + 1) exp I − γL(¯nL + 1) γL(⟨nˆ1⟩ + 1) × Θ γL(¯nL + 1) − I .

The derivation for the bond connected to the right reservoir is essentially the same and, therefore, omitted for brevity. p. 8
Where the paper says it

(31) of the main text f(I) = 1 γL(⟨nˆ1⟩ + 1) exp I − γL(¯nL + 1) γL(⟨nˆ1⟩ + 1) × Θ γL(¯nL + 1) − I . (A13) The derivation for the bond connected to the right reservoir is essentially the same, and, therefore, omitted for brevity.

Appendix B

The final result for the distribution of current between two neighboring inner sites takes the form of Eq. (33) from the main text. p. 8

Where the paper says it

(A12) Finally, evaluating the above integral by the residue theorem and recalling that g = ⟨nˆ1⟩ + 1, we arrive at the first line of Eq. (31) of the main text f(I) = 1 γL(⟨nˆ1⟩ + 1) exp I − γL(¯nL + 1) γL(⟨nˆ1⟩ + 1) × Θ γL(¯nL + 1) − I .

p. 8
Where the paper says it

(A12) Finally, evaluating the above integral by the residue theorem and recalling that g = ⟨nˆ1⟩ + 1, we arrive at the first line of Eq. (31) of the main text f(I) = 1 γL(⟨nˆ1⟩ + 1) exp I − γL(¯nL + 1) γL(⟨nˆ1⟩ + 1) × Θ γL(¯nL + 1) − I .

The asymmetry in this distribution is entirely governed by the mean current Ist. p. 4
Where the paper says it

For the inter-site current, the result (33) is an asymmetric Laplace distribution. The asymmetry is entirely governed by the mean current Ist.

Appendix C

The spectrum of the effective non-Hermitian Hamiltonian shows that the relaxation time Tr ∼ L cubed. The most long-lived resonances correspond to p = 1, L. p. 1

Where the paper says it

The current I flows from the left to the right driven by the mean particle density imbalance n¯L − n¯R. Relaxation rates γL and γR correspond to the particle exchange rates between each reservoir and the coupled site of the chain.

p. 1
Where the paper says it

The current I flows from the left to the right driven by the mean particle density imbalance n¯L − n¯R. Relaxation rates γL and γR correspond to the particle exchange rates between each reservoir and the coupled site of the chain.

p. 1
Where the paper says it

The current I flows from the left to the right driven by the mean particle density imbalance n¯L − n¯R. Relaxation rates γL and γR correspond to the particle exchange rates between each reservoir and the coupled site of the chain.

Appendix D

In the fermionic case, the only difference emerges in the Lindbladian that describes particle exchange between the chain’s edge sites and the reservoir to account for Pauli’s exclusion principle. After assembling the Hamiltonian and Lindbladian terms into the master equation (2) and applying the definition of the SPDM elements ρl′,l = ⟨cˆ†l cˆl′⟩ one finds that the SPDM satisfies the same equation (11). p. 2

Where the paper says it

(10) where ⟨nˆ1⟩ = ρ1,1 and ⟨nˆL⟩ = ρL,L are the mean occupation numbers for the first and last lattice sites, respectively. The equation of motion for the SPDM can be derived directly from the master equation (2).

p. 2
Where the paper says it

(10) where ⟨nˆ1⟩ = ρ1,1 and ⟨nˆL⟩ = ρL,L are the mean occupation numbers for the first and last lattice sites, respectively. The equation of motion for the SPDM can be derived directly from the master equation (2).

Here we derive the distribution for the current between the left reservoir and the first site in the chain by rewriting Eq. (27). The derivation involves evaluating integrals which lead to a product of two Fresnel integrals resulting in Eq. p. 8

Where the paper says it

The remaining integral with respect to a1, a∗ 1 includes the phase factor emerging from the formula for current ˜I(α1, ω) = Z da1da∗ 1 e α ∗ 1a1−a ∗ 1α1+iωγL|a1| 2 . (A7) Switching to real quadratures a1 = (q + ip)/ √ 2, da1da∗ 1 = 1 2 dq dp, (A8) we obtain a product of two Fresnel integrals leading to ˜I(α1, ω) = πi ωγL exp − i ωγL |α1| 2 .

(A9).

The current distribution for the inter-site current is obtained by evaluating the Fourier integral (B6) using the residue theorem closing the contour in the complex ω-plane. This yields Eq. p. 1

Where the paper says it

now routinely applied to bosonic systems, phonon and photon transport, and quantum master equations [2, 49]. The central object of FCS is the characteristic function of the transferred particle number, whose logarithm yields the cumulant generating function and thereby provides access to all cumulants, while the complete probability distribution is obtained via inverse Fourier transformation.

(33) from the main text.

The perturbative approach to find the solution of the eigenvalue problem for arbitrary L in the form of a power series in γ/J yields Eq. (C13). The most long-lived resonances correspond to p = 1, L.

The only difference in the Lindbladian that describes particle exchange between the chain’s edge sites and the reservoir is to account for Pauli’s exclusion principle. After assembling the Hamiltonian and Lindbladian terms into the master equation (2) and applying the definition of the SPDM elements ρl′,l = ⟨cˆ†l cˆl′⟩ one finds that the SPDM satisfies the same equation (11).

The derivation for the bond connected to the left reservoir starts by rewriting Eq. (27). The evaluation of integrals leads to a factor π 2(L−1). p. 8

Where the paper says it

The remaining integral with respect to a1, a∗ 1 includes the phase factor emerging from the formula for current ˜I(α1, ω) = Z da1da∗ 1 e α ∗ 1a1−a ∗ 1α1+iωγL|a1| 2 . (A7) Switching to real quadratures a1 = (q + ip)/ √ 2, da1da∗ 1 = 1 2 dq dp, (A8) we obtain a product of two Fresnel integrals leading to ˜I(α1, ω) = πi ωγL exp − i ωγL |α1| 2 .

The characteristic function reduces to χred(αl, α∗l) = exp−gαl2, with g = ⟨nˆl⟩ + 1. p. 8
Where the paper says it

, αL simply yields a factor π 2(L−1). Because offdiagonal terms that mix αℓ, α∗ ℓ ′ for ℓ ̸= ℓ ′ are forced to vanish, the characteristic function reduces to χred(α1, α∗ 1 ) = exp−g|α1| 2 , (A6) with g = ⟨nˆ1⟩ + 1.

The current distribution can now be written as f(I) = Z dal dal+1da∗l da∗l+1 × Qred(al, al+1, a∗−ell, a∗−ell+1) δ I − I(a). The Fourier integral (B6) is evaluated by the residue theorem closing the contour in the complex ω-plane. p. 9

Where the paper says it

(B1) we obtain χ˜(ω) = 4 J 2 det Σˆ · 1 (ω − ω1)(ω − ω2) , (B8) where ω1,2 = iλ1,2, λ1 = 2(uℓ − B) J det Σˆ > 0, λ2 = − 2(uℓ + B) J det Σˆ < 0, uℓ = p (⟨nˆℓ⟩ + 1)(⟨nˆℓ+1⟩ + 1). (B9) Now, the Fourier integral (B6) is evaluated by the residue theorem closing the contour in the complex ω-plane.

p. 9
Where the paper says it

(B1) we obtain χ˜(ω) = 4 J 2 det Σˆ · 1 (ω − ω1)(ω − ω2) , (B8) where ω1,2 = iλ1,2, λ1 = 2(uℓ − B) J det Σˆ > 0, λ2 = − 2(uℓ + B) J det Σˆ < 0, uℓ = p (⟨nˆℓ⟩ + 1)(⟨nˆℓ+1⟩ + 1). (B9) Now, the Fourier integral (B6) is evaluated by the residue theorem closing the contour in the complex ω-plane.

The energy spectrum up to second order in γ is given by Eq. (C13). The most long-lived resonances correspond to p = 1, L.

The current distribution can now be written as f(I) = Z dal dal+1da∗−ell da∗−ell+1 × Qred(al, al+1, a∗−ell, a∗−ell+1) δ I − I(a). The Fourier integral (B6) is evaluated by the residue theorem closing the contour in the complex ω-plane.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Enhanced current statistics calculation by using phase-space formalism to derive a closed form for anti-normally ordered characteristic function, allowing computation of higher moments of the distribution for arbitrary dephasing strength.

  2. Improved steady-state characterization by deriving a closed linear system for the single-particle density matrix elements, which yields exact analytic expressions for site populations and mean currents valid for any dephasing strength.

  3. Enabled simulation of current fluctuations by providing an explicit formula for the current distribution function f(I) in terms of the Husimi Q-function, which is useful for characterizing boundary and inter-site currents as exponential or asymmetric Laplace distributions.

  4. Developed a method to characterize spatial structure of fluctuations by deriving the four-order correlation function *, showing that the covariance cov(I I'+1) = Is/2 for neighboring currents and zero correlation for bonds separated by more than one site.

  5. Provided tools for analyzing transport transition by linking the current formula (Eq. 15) to the scaling of resistance with chain length in the limit L -> infinity when dephasing is non-zero, indicating a shift from ballistic to diffusive transport.

Abstract

We study quantum transport of non-interacting particles in a bosonic tight-binding chain coupled to Markovian reservoirs at its boundaries. Using the analytic solution in the form of an anti-normally ordered quantum characteristic function, we obtain exact probability distribution functions for the current on each bond in the chain, as well as the inter-bond current correlation functions. We extend the analysis to tight-binding chains subject to uniform on-site phase damping. In the phasedamped case, we find that a Gaussian approximation for the quantum characteristic functions predicts current fluctuations with good accuracy.

Sources

Related papers