Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System

arXiv:2609.09906 · math.PR · Submitted 2026-09-09 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Mathematics. The day in mathematics: new theorems, new proofs, and what they open.

Ada: We're looking at the paper: "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System".

Emmy: Here's the gist of the paper. Stable and Gaussian Fluctuation Limit of a Lévy-Driven Slow-Fast System with Polynomial Dissipation studies the fluctuation limit of a slow-fast system driven by α-stable Lévy noise with 1 < α < 2, determining whether the limit is either a stable process or a Brownian motion based on parameters p and α, with the critical line being q + 1 − p = α/2.

Ada: The solution to the frozen equation (1.1) admits a unique strong solution and an invariant measure µ.

Emmy: Characterization of Fluctuation Limits The main result, Theorem 1.1, establishes the nature of the fluctuation limit based on the relationship between p and q+1-α.

Ada: (i) If q + 1 − α < p < q + 1 − α/2, and under certain conditions when q = 1, then there exists an αq+1−p-stable process S such that ε−(1−q+1−pα) (Xε − X) → S in f.d.d.

Title and authors: Ada: So, looking at the summary of "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System", they are essentially showing how to determine the precise nature of the limiting process by looking at where p and alpha sit relative to that critical line we talked about.

Emmy: They break it down into three main cases based on the relationship between p and q plus one minus alpha. First, if p is in a certain range, specifically between q plus one minus alpha and q plus one minus alpha over two, then the limit is an alpha-stable process.

Kolya: And they have a second case where p is larger than that critical line, meaning it's outside that stable process range for the first case; in this situation, the limit turns out to be a Brownian motion with a specific variance defined by some term involving R and Z.

Ada: The third case happens when p exactly hits that critical line, q plus one minus alpha over two; here, the result is a standard Brownian motion B scaled in a particular way related to log of epsilon. This precise point is where you get the most interesting scaling behavior.

Emmy: They also show how they use scaling properties of the Lévy process L to relate the system's trajectory difference, which we call X t minus X t zero, to some new process Z t over T and R d r dr, which helps them prove these limits.

Kolya: I wonder what this means practically? If you're modeling something with heavy tails—like financial data or turbulence—this paper tells you exactly what kind of tail behavior you should expect based on the parameters of your system.

The paper's summary: Ada: Now, the authors suggest some refinements to their initial approach, which they call improvements in "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System". They focus on making the results more robust by tightening the conditions under which these limits hold.

Emmy: They point out that while they set up concrete functions for f and g, some of the existing literature assumes things like Lipschitz continuity and boundedness of the drift, which are not always true for these types of systems. This paper is an improvement because it handles those situations where those classical assumptions don't hold.

Kolya: So what's the practical implication there? It means this result isn't just for idealized setups; it applies to more general systems that you might actually encounter in physical or financial modeling, even if they aren't perfectly smooth.

Ada: Exactly. They show that their approach is valid even when the fast component of the system exhibits polynomial mixing instead of exponential mixing, which was a weakness in some previous studies. This makes the results applicable to a broader class of problems where things are more complex than textbook examples.

Emmy: They also refine how they handle the scaling factors and how they define these limits in terms of convergence in finite-dimensional distributions, or f.d.d., which is a standard way to say that the processes behave like each other when you look at a finite set of points.

The paper's improvements: Ada: So to wrap up this discussion on "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System", the authors confirm that depending on p and alpha, you get either an alpha stable process or a Brownian motion, with the critical line being q plus one minus p equals alpha over two.

Emmy: This tells us that for these slow fast systems driven by stable Lévy noise, if you are in the right parameter regime, the long term behavior is predictable in terms of whether you see heavy tails or a Gaussian limit.

Kolya: And for me, what's important is that they clearly state the limitations they have; they admit that their method relies on specific concrete functions and doesn't apply to every conceivable system without some extra assumptions.

Ada: Right, so the overall picture is that this paper gives us a very precise tool to predict the fluctuation limit based on parameter choices, which is really useful for designing more accurate stochastic models in various fields.

Emmy: This work on "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System" gives us a clear way to distinguish between the stable process and Brownian motion limits depending on the parameters p and alpha.

Kolya: And that distinction is crucial because it tells us whether we're dealing with heavy tails or something more Gaussian.

Conclusion: Ada: So we looked at that paper titled "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System", and it basically lays out how to tell if the long term behavior of these slow fast systems will be a stable process or just standard Brownian motion.

Emmy: That's right, Ada. They show that the limit depends entirely on how you set the parameters p and alpha relative to that one critical line we talked about, q plus one minus alpha over two.

Kolya: And from my side, what I found interesting is how they connect those scaling limits—the stable process and the Brownian motion—to concrete mathematical objects like the variance of a Brownian motion or an alpha stable process.

Ada: Exactly. They show that if p is in one range, you get an alpha stable process, and if p is larger than that critical line, it becomes a standard Brownian motion with a specific variance defined by some term involving R and Z.

Emmy: And when p hits that exact critical line, q plus one minus alpha over two, they get this really interesting logarithmic scaling result where you see something like the r minus three over two B time t over log t in finite dimensional distribution.

Kolya: That logarithmic scaling case is where the math gets a bit trickier because it involves that log of epsilon term, and seeing how that relates to the noise structure is key for understanding heavy tails.

Ada: So what this means for us on the radio, it’s a very precise roadmap for anyone modeling systems with Lévy noise. It moves us past just guessing whether we get stable or Gaussian to actually calculating which one we are going to see.

Emmy: It gives you the structure behind the computation, showing that even when things look messy with polynomial mixing, there's an underlying algebraic connection determining the final form of the limit.

Kolya: For someone just listening, it tells you that if your system has heavy tails—that alpha noise—you need to check your parameters against that critical line to predict whether you’re looking at something that behaves like a stable process or a normal Gaussian distribution.

Ada: Exactly. It’s about getting the right scaling factor so we can see what actually happens over long periods, not just in a short snapshot.

Emmy: So, taking this paper on "Stable and Gaussian Fluctuation Limit of a L'evy-Driven Slow-Fast System" as an example of how structure dictates behavior, it makes you think about how these same scaling arguments apply to other areas.

Kolya: Thinking about the next thing is good. Next week we’re looking at some work on optimal control problems with measurable coefficients, which is a bit different but deals with finding the best path through uncertainty.

School of Mathematics, Nanjing University · School of Mathematical Sciences, Dalian University of Technology

math.PR

Submitted: 2026-09-09

Updated: 2026-11-05

Comments: 46 pages, 1 figure

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 83/100

The gist: Stable and Gaussian Fluctuation Limit of a Lévy-Driven Slow-Fast System with Polynomial Dissipation studies the fluctuation limit of a slow-fast system driven by α-stable Lévy noise with 1 < α <…

Key concepts

Stable and Gaussian Fluctuation Limit
This refers to the long-term statistical behavior of the system's fluctuations. The paper tests whether these fluctuations settle into a predictable stable process (like a Lévy process) or a standard Brownian motion (Gaussian limit) as time scales change.
$p$ and $\alpha$
$p$ and $\alpha$ are key parameters defining the noise and system dynamics. $\alpha$ governs the heavy-tailed nature of the Lévy noise, while $p$ relates to the structure of the slow-fast system. Their relationship dictates which type of fluctuation limit is reached.
Critical Line ($q + 1 - p = \alpha/2$)
This specific mathematical condition separates two fundamentally different long-term behaviors. If the parameters fall on one side of this line, the system converges to a stable process; if they are on the other side, it converges to a Brownian motion. This line acts as the boundary between these two limiting behaviors.
Scaling Limits (f.d.d.)
Scaling limits describe how the system's behavior changes when time and space are scaled by factors like $T$ and $\epsilon$. The paper shows that under specific conditions, the process converges in distribution to a stable process or Brownian motion when these scaling procedures are applied.

Terminology

Summary

Stable and Gaussian Fluctuation Limit of a Lévy-Driven Slow-Fast System with Polynomial Dissipation studies the fluctuation limit of a slow-fast system driven by α-stable Lévy noise with 1 < α < 2, determining whether the limit is either a stable process or a Brownian motion based on parameters p and α, with the critical line being q + 1 − p = α/2. p. 0 The solution to the frozen equation (1. p. 11) admits a unique strong solution and an invariant measure µ. p. 1

Characterization of Fluctuation Limits

The main result, Theorem 1.1, establishes the nature of the fluctuation limit based on the relationship between p and q+1-α. p. 0

(i) If q + 1 − α < p < q + 1 − α/2, and under certain conditions when q = 1, then there exists an αq+1−p-stable process S such that ε−(1−q+1−pα) (Xε − X) → S in f. p. 1d.d.

(ii) If p > q + 1 − α/2, there exists a Brownian motion W with variance σ2 defined in (3. p. 119), such that ε−1/2 (Xε − X) → W in f. p. 0d.d.

(iii) If p = q + 1 − α/2, there exists a standard Brownian motion B such that Xε−Xpε log(1/ε) → (q + 1 − p)-3/2B in f. p. 2d.d.

Analysis of Scaling Limits

The analysis involves scaling the process using T:= 1/ε and At:= R t0 Yq s ds, leading to expressions like (1.5) for the scaled difference (ε−γ(Xεt − Xt))t≥0. p. 0

The proof proceeds by analyzing terms in (2. p. 43), separating them into I1, I2, I3, and I4. The vanishing limit of I1 and I2 is shown using the tightness of Law(Yt) ≡ µ. p. 5

The stable limit (I3) is shown to be an α/r-stable process S, where r:= q + 1−p. p. 0 The Gaussian limit (I4) vanishes if EI4(t, T)2 = O(T), which is established by showing E[R(Ys)ds2] = O(T). p. 0

Brownian and Logarithmic Scaling Results

In the Brownian Limit section, assuming p ≥ q+1−α/2 implies r ≤ α/2. The normal scaling (3. p. 21) leads to the identification of a continuous Gaussian martingale MΘ = IΘ. p. 0 By ergodic theorem, the quadratic variation of MT· is shown to be σ2t with σ2:= Z R Z R−-1 Θ(y + x) − Θ(y)2 ν(dx)µ(dy). p. 0 This implies Law(M) = Law(W), where W is a Brownian motion with variance σ2. p. 0 The logarithmic scaling case (3. p. 42) for r = α/2 leads to the identification of the limit as (r−3/2Bt)t≥0 in f. p. 3d.d.

Technical Bounds and Properties

The proof relies heavily on Lemma A.3, which provides bounds for h(y, x), such as h(y, x) ≤ C + Cr min(xr, yr). p. 8 The boundedness of R is established in Lemma A. p. 14. Furthermore, the Poisson equation LΨ = -R, ZΨdµ = 0 yields a solution Ψ(y) = Z ∞ 0 PtR(y)dt. p. 1 The final result is obtained by combining the limiting behaviors of MΘ and HTt with the scaling factors, resulting in (1.8).

Conclusion and Final Limit

The combination of results leads to the conclusion that MT t√T log T → (r−3/2Bt)t≥0 in f.d.d. This implies that for each t ≥ 0, lim T→∞ 1/√T AT t → (Wt)t≥0 in f. p. 4d.d. The final statement is that MT t√T log T → (r−3/2Bt)t≥0 in f. p. 3d.d. This is combined with the previous results to prove (1. p. 48).

Appendix Details

Lemma A.1 confirms that equation (1. p. 11) admits a unique strong solution for each p > 0 and α ∈ (1, 2). p. 1 Lemma A.2 establishes the existence of an invariant measure µ with finite moments up to order α + p − 1. p. 1 Lemma A.4 proves that R is bounded when r ∈ (−∞, 0) ∪ (0, α). p. 5 Lemma A.5 shows that Ψ(y):= Z ∞ 0 PtR(y)ds satisfies the Poisson equation LΨ = -R, RΨdµ = 0. p. 1 The final result is obtained by combining (3. p. 123), (3.24), (3.27) and (3.30).

References

[App09] David Applebaum, Lévy Processes and Stochastic Calculus, volume 2, Cambridge University Press, 2009

[BLP15] Mátyás Barczy, Zenghu Li, and Gyula Pap. Yamada-Watanabe results for stochastic differential equations with jumps. p. 4 International Journal of Stochastic Analysis, 2015(1):460472, 2015

[Bre92] Leo Breiman. Probability. p. 5 SIAM, 1992

[CFKM20] Ilya Chevyrev, Peter K Friz, Alexey Korepanov, and Ian Melbourne. Superdiffusive limits for deterministic fast–slow dynamical systems. p. 0 Probability Theory and Related Fields, 178(3):735–770, 2020

[DW14] Jinqiao Duan and Wei Wang. Effective Dynamics of Stochastic Partial Differential Equations. Elsevier, 2014

[Fou13] Nicolas Fournier. On pathwise uniqueness for stochastic differential equations driven by stable lévy processes. p. 0 Annales de l’Institut Henri Poincaré, Probabilités et Statistiques, 49(1):138–159, 2013

[JS03] Jean Jacod and Albert N. Shiryaev. Limit Theorems for Stochastic Processes, volume 288 of Grundlehren der mathematischen Wissenschaften. p. 0 Springer, Berlin, Heidelberg, 2 edition, 2003

[Kal02] Olav Kallenberg. Foundations of Modern Probability. p. 5 Probability and Its Applications. p. 5 Springer, New York, 2 edition, 2002

[KP19] Alexei Kulik and Ilya Pavlyukevich. Non-Gaussian limit theorem for non-linear Langevin equations driven by Lévy noise. p. 0 Annales de l’Institut Henri Poincaré, Probabilités et Statistiques, 55(3):1278–1315, 2019

[KP21] Alexei Kulik and Ilya Pavlyukevich. Moment bounds for dissipative semimartingales with heavy jumps. Stochastic Processes and their Applications, 141:274–308, 2021

[Kun04] Hiroshi Kunita. Stochastic differential equations based on Lévy processes and stochastic flows of diffeomorphisms. p. 0 In Real and Stochastic Analysis: New Perspectives, pages 305–373. Springer, 2004

[MZ15] Ian Melbourne and Roland Zweimüller. Weak convergence to stable Lévy processes for nonuniformly hyperbolic dynamical systems. p. 0 Annales de l’IHP Probabilités et statistiques, 51(2):545–556, 2015

[PZ07] Szymon Peszat and Jerzy Zabczyk. Stochastic Partial Differential Equations with Lévy Noise: An Evolution Equation Approach, volume 113. p. 0 Cambridge University Press, 2007

[SXX22] Xiaobin Sun, Longjie Xie, and Yingchao Xie. Strong and weak convergence rates for slow–fast stochastic differential equations driven by α-stable process. p. 0 Bernoulli, 28(1):343–369, 2022

[Wan13] Jian Wang. Exponential ergodicity and strong ergodicity for SDEs driven by symmetric α-stable processes. p. 0 Applied Mathematics Letters, 26(6):654–658, 2013

[YXWJ22] Xiaoyu Yang, Yong Xu, Ruifang Wang, and Zhe Jiao. The central limit theorem for slow–fast systems with Lévy noise. p. 0 Applied Mathematics Letters, 128:107897, 2022

[ZZ23] Xiaolong Zhang and Xicheng Zhang. Ergodicity of supercritical SDEs driven by α-stable processes and heavy-tailed sampling. p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved analysis of slow-fast system fluctuations by identifying specific critical lines for convergence to stable versus Brownian motion limits, defined as q + 1 - p = alpha/2. This allows for precise prediction of the limiting process based on parameters p and alpha, which is crucial for designing appropriate stochastic models.

  2. Development of a method to derive the fluctuation limit by using the averaged equation Xt = xi, where Xi is related to Yε through scaling properties derived from the Lévy process L. This provides a concrete framework for analyzing systems where classical averaging approaches fail due to polynomial mixing of the fast component.

  3. Application of refined estimates derived in Section 2 and 3 to rigorously prove convergence rates in specific regimes, such as showing that (T − r/alpha AT t)t≥0 → (St)t≥0 in f.d.d for the stable limit case, or (T - 1/2AT t)t≥0 → Wt in f.d.d for the Brownian limit case. This capability enables high-precision simulation and approximation of system behavior under heavy-tailed noise conditions.

  4. Implementation of a technique to determine the distribution of the limiting process ZT t / sqrt(T log T) as T approaches infinity, which converges to (r - 3/2Bt)t≥0 in distribution for the critical logarithmic scaling case (r = alpha/2). This allows an AI system to characterize the long-term statistical properties of slow-fast systems driven by α-stable noise with high accuracy.

Related papers