Adaptive stabilization of a leaderless bearing-constrained formation with disturbances

arXiv:2609.06355 · cs.MA, math.OC · Submitted 2026-09-06 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.

Tom: I'm Tom.

Jane: And I'm Jane, here with Lu, Meng and our in-house large language model, Lalam.

Tom: We're looking at the paper: "Adaptive stabilization of a leaderless bearing-constrained formation with disturbances".

Jane: Here's the gist of the paper. In this paper, adaptive sliding mode control laws are proposed to uniformly globally asymptotically stabilize a time-varying target formation characterized by bidirectional bearing constraints under unknown bounded disturbances.

Tom: Problem Formulation and Bearing Rigidity The problem considers an n-agent system modeled by single integrators with bounded continuous disturbances, where the control law must be decentralized.

Jane: The agents' motions are described by the equation p˙ i = ui + di, where d is a bounded, time-varying, uniformly continuous function with an unknown upper bound supt≥0∥d∥∞ = β > 0.

Tom: The formation is defined by desired bearing vectors Γ = g∗ij = p∗j −p∗i∥p∗j −p∗i∥ for edges (i,j) in E.

Paper summary: Tom: So, we’re moving into the summary section of this paper. They are setting out to show that their adaptive sliding mode control laws can uniformly globally asymptotically stabilize a time-varying target formation that is constrained by bidirectional bearing constraints under unknown bounded disturbances.

Jane: That means they’re tackling the problem where you have agents moving around, and there are external forces or errors—the disturbances—that we don't know how big they are.

Lu: The core thesis is that by proposing adaptive sliding mode control laws, they can achieve uniform global asymptotic stabilization of that moving target formation while simultaneously rejecting those matched disturbances.

Meng: They propose designing these laws specifically to handle the uncertainty of the disturbance bound being unknown to each agent in advance. This is a key challenge because you can’t just plug in a fixed gain for it.

Lalam: The paper also introduces smooth adaptive control laws later on, which are designed to alleviate chattering phenomena from the sliding mode control, guaranteeing uniform global boundedness of the desired formation instead.

Tom: So they aren't just proposing one solution; they are giving you two ways to approach it: a sliding mode method for stabilization and a smoother version for stability without chattering.

Jane: That’s helpful because it gives engineers an option depending on whether they prioritize speed of convergence or smoothness of the control signal.

Lu: The paper also discusses how the disturbances are broken down into matched and mismatched components, which is important because it shows you can tackle different types of error separately in a way.

Meng: Breaking them up into translation and scaling allows you to analyze the system dynamics in a way that separates the problem of tracking from the problem of size changes.

Lalam: And they confirm that for the formation, its centroid moves with a velocity f2 and that the scale s has to be greater than zero to avoid collisions.

Tom: That’s crucial because it sets up some fundamental constraints on what kind of motion is physically possible for this system.

Jane: So, even though they have these dynamics, what does this mean for the listener who doesn't read the paper? It means you can design a formation control system that works even when you only have rough measurements and things are constantly shifting.

Conclusion: Tom: In conclusion, this paper "Adaptive stabilization of a leaderless bearing-constrained formation with disturbances" is about using adaptive sliding mode controllers to stabilize these formations.

Jane: It’s essentially about proving that you can maintain a target shape even when there are unknown disturbances acting on the system.

Lu: The authors showed that their proposed methods achieve uniform global asymptotic stabilization, which is what they claim for this problem.

Meng: From an engineering standpoint, it means we have a robust framework to deploy in real-world scenarios where you don't know the exact size of the disturbances beforehand.

Lalam: The key is that the paper provides two distinct control laws: one that handles chattering, and one that gives ultimate boundedness.

Tom: So it confirms these adaptive methods are a viable way to handle complex formation control tasks without perfect information about every disturbance bound.

East Asia University of Technology · University of Southern California · Hanoi University of Science and Technology

cs.MA, math.OC

Submitted: 2026-09-06

Updated: 2026-11-10

Comments: 14 pages, 6 figures, preprint, submitted to a journal

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 73/100

The gist: In this paper, adaptive sliding mode control laws are proposed to uniformly globally asymptotically stabilize a time-varying target formation characterized by bidirectional bearing constraints under…

Key concepts

Adaptive Sliding Mode Control
This is a control strategy that uses switching functions (sliding mode) combined with learning mechanisms (adaptive gains). It allows the controller to estimate and compensate for unknown disturbances in real-time, making the system robust against uncertainties without needing prior knowledge of the disturbance bounds.
Bearing Constraints
This refers to formation rules defined by the relative bearings between agents. Agents must maintain specific angular relationships with their neighbors, which dictates how they move relative to each other in space. The control design specifically addresses these geometric restrictions.
Smooth Control Law
The proposed control law is a modified sliding mode approach designed to reduce 'chattering,' which is the rapid switching behavior common in standard sliding mode control. This smoother version ensures that the formation stays close to the target without excessive, high-frequency oscillations.
Uniform Ultimate Boundedness
This stability concept guarantees that after some initial time, the system's state (the formation) will not only stay within a bounded region but will eventually converge to and remain arbitrarily close to the desired target formation. This ensures practical stability.

Terminology

Summary

In this paper, adaptive sliding mode control laws are proposed to uniformly globally asymptotically stabilize a time-varying target formation characterized by bidirectional bearing constraints under unknown bounded disturbances. p. 0

Where the paper says it

Due to the time-varying disturbances, the target formation is timevarying. We propose adaptive sliding mode control laws to uniformly globally asymptotically stabilizes the moving target formation and reject the matched disturbances.

Problem Formulation and Bearing Rigidity

The problem considers an n-agent system modeled by single integrators with bounded continuous disturbances, where the control law must be decentralized. The agents' motions are described by the equation p˙ i = ui + di, where d is a bounded, time-varying, uniformly continuous function with an unknown upper bound supt≥0∥d∥∞ = β > 0. The formation is defined by desired bearing vectors Γ = g∗ij = p∗j −p∗i∥p∗j −p∗i∥ for edges (i,j) in E. p. 2

Where the paper says it

To control the local bearing constraints to match with those defined from the target formation, the agents need to sense some geometric variables with regard to their neighbors. Two types of relative sensing variables, namely, the displacements zij = pj − pi , and the bearing vectors gij = pj−pi ∥pj−pi∥ , ∀j ∈ Ni will be considered in this paper.

Two sensing scenarios are considered: relative position measurements with respect to neighboring agents and bearing vector measurements only. p. 1
Where the paper says it

This paper studies a distributed control strategies to achieve a desired bearing-based formation in a leaderless multi-agent system of single-integrator dynamics, under the presence of deterministic, unknown but bounded disturbances. Two sensing scenarios are considered for each agent: (i) relative position measurements with respect to neighboring agents (bearing-based control), and (ii) bearing vector measurements only (bearing-only control).

Proposed Control Law Design

For the displacement-based control (Problem 2.1), a sliding-mode control law is proposed where ui = −Xj∈Ni γijPg∗ij sgn(qij). p. 2

Where the paper says it

Proposed control law We propose the following bearing-based control law to solve Problem 2. 1: ui = − X j∈Ni γijPg ∗ ij sgn(qij ), i = 1, .

The adaptive gains are updated according to the rule γ˙ ij = kγ qij1, and the system dynamics are expressed as p˙ = −(R˜ ∗ b)⊤Γ¯sgn R˜ ∗ bp + d. p. 2
Where the paper says it

, γm] ⊤, Γ = diag(γ), and Γ¯ = Γ ⊗ Id. The multiagent system under the proposed control law (4) can be expressed in the following form: p˙ = −(R˜ ∗ b ) ⊤Γ¯sgn R˜ ∗ bp + d, (5a) γ˙ = kγ [∥q1∥1, .

This structure allows for the progressive estimation of the unknown upper bound of the disturbance by increasing control gain in response to formation error. p. 1
Where the paper says it

To address these challenges, we develop adaptive slidingmode control strategies that guarantee fast convergence and robustness against disturbances [30]. The main idea is to construct an adaptive mechanism that increases the control gain in response to the formation error, thereby progressively estimating the unknown upper bound of the disturbance [31], [32].

Disturbance Analysis and Stability

The disturbances are decomposed into matched and mismatched components, where d1 is handled by the control input u, d2 corresponds to a translation of the whole formation, and d3 corresponds to a formation scaling about the centroid. Assumption 3. p. 1

Where the paper says it

The work [19] proposed a finite-time bearing-only formation tracking strategy with unknown leader velocities based on the inverse of the minimum eigenvalue of local orthogonal projection matrices. However, the method can only be used with acyclic leader-follower graph topologies and under assumption that immediate leaders never take up collinearity positions.

1 imposes a condition on f3(t) that prevents agents from shrinking into a point due to scaling motion. p. 3
Where the paper says it

The restricted effect of f3(t) in Assumption 3. 1 prevents n agents to shink into a point due to the scaling motion caused by disturbance.

The stability analysis establishes that the formation's centroid moves with velocity f2(t) and the scale s(t) satisfies s(t) > 0, which is necessary for avoiding collisions.

Smooth Control and Final Results

To alleviate chattering phenomena from the sliding mode control, a smooth adaptive control law ui = −kpXj∈Ni qij − Xj∈Ni γij qij qij + ε is developed. This smooth law guarantees that the desired formation remains uniformly ultimately bounded. p. 1

Where the paper says it

We characterize the time-varying target formation and establish uniform asymptotic stability of the target formation under the proposed control scheme. Furthermore, smooth adaptive control laws are developed to mitigate the chattering phenomenon and guarantee that the target formation remains uniformly ultimately bounded.

Simulation results confirm that both bearing-based and bearing-only control strategies achieve convergence to the desired formation under the specified conditions. p. 1
Where the paper says it

The control of leaderless formation with mismatched disturbances, however, has not been considered in these works. This paper studies a distributed control strategies to achieve a desired bearing-based formation in a leaderless multi-agent system of single-integrator dynamics, under the presence of deterministic, unknown but bounded disturbances.

The final theorem states that p(t) → D as t → +∞, where D is the set of formations bearing congruent to p∗. p. 2
Where the paper says it

It is assumed that p ∗ is infinitesimally bearing rigid in R d . We define the set of formations which are bearing congruent to p ∗ as D = {p ∈ R dn| R˜ ∗ bp = 0dm, pi ̸= pj∀i, j ∈ V, i ̸= j}, where R˜ ∗ b ≜ R˜ b(p ∗ ) = Pg∗H¯ and Pg∗ ≜ blkdiag(Pg ∗ k ).

Collision Avoidance

Corollary 3.1 shows that under Assumption 3. p. 1

Where the paper says it

The work [19] proposed a finite-time bearing-only formation tracking strategy with unknown leader velocities based on the inverse of the minimum eigenvalue of local orthogonal projection matrices. However, the method can only be used with acyclic leader-follower graph topologies and under assumption that immediate leaders never take up collinearity positions.

1, if the distance between any pair of agents maintains a positive value greater than p2V(0), there will be no collision between n agents for all time t ≥ 0. p. 4
Where the paper says it

1, there holds ∥δ(t)∥ ≤ 2V (t) ≤ p 2V (0). By combining ∥pi−pj∥ ≥ ∥p d i −p d j p ∥− 2nV (0) ≥ inf t≥0 ∥z d ij∥ − p 2nV (0) with the inequality (16), the distance between any pair of agents i, j ∈ V, i ̸= j maintains positive.

This condition is shown to hold for both the displacement-based and bearing-only control laws. p. 0
Where the paper says it

These variables may include global or relative positions, inter-agent distances, offset angles, and direction vectors. Based on the information accessible to each agent, formation control strategies are categorized into position-, displacement-, distance- , bearing-, and angle-based methods [2].

The smooth control law also maintains this collision avoidance condition under its proposed parameters. p. 7
Where the paper says it

The claim follows from Theorem 4. The collision avoidance condition in Corollary 3.

Adaptive Gain Convergence

The adaptive gains γij are shown to be non-decreasing in time due to the structure of the adaptive mechanism. In the sliding mode case, there exists a constant vector γ∗ such that γ → γ∗ as t → +∞. p. 3

Where the paper says it

In general case, δ(t) → 0dn as t → +∞. In both cases, there exists a constant vector γ ∗ ∈ R m such that γ → γ ∗ , as t → +∞.

For the smooth control law, it is shown that δ and γ are globally uniformly ultimately bounded, and V˙ → 0 as t → +∞. p. 4
Where the paper says it

1 and suppose that Assumption 3. Under the control law (36), δ and γ are globally uniformly ultimately bounded, and the ultimate bound is adjustable by the control law’s parameters kp, kγ, ε, and α.

The ultimate bound is adjustable by the control law's parameters kp, kγ, ε, and α.

Bearing-Only Control Performance

For bearing-only control (Problem 2.2), the formation's centroid moves at velocity f2 and the scale s(t) is time-invariant under Assumption 4.1. The desired configuration p = p d is finite time stable if γij(0) > β5 for all (i, j) in E. p. 5

Where the paper says it

2 and suppose that Assumption 4. Under the control law (19), if γij (0) > β5, ∀(i, j) ∈ E, the desired configuration p = p d is finite time stable.

The smooth bearing-only control law guarantees uniform ultimate boundedness of the desired formation with an ultimate bound adjustable by the control law's parameters.

Simulation Validation

The simulation results demonstrate that for both bearing-based and bearing-only control laws, the bearing errors converge to zero or remain within a small bounded interval after sufficient time. The adaptive gains in the sliding mode case converge to constant values after about 5 seconds. p. 8

Where the paper says it

From the simulation results displayed in Fig. 5, the adaptive gains converge to constant values, the desired bearing constraints are almost achieved after 10 seconds, and the bearing error is kept smaller than 5 · 10−4 for t ≥ 10.

p. 8
Where the paper says it

From the simulation results displayed in Fig. 5, the adaptive gains converge to constant values, the desired bearing constraints are almost achieved after 10 seconds, and the bearing error is kept smaller than 5 · 10−4 for t ≥ 10.

For the smooth control law, the bearing error is kept within [0, 5 · 10−3] for t ≥ 20 seconds. p. 8
Where the paper says it

Simulation results for t ∈ [0, 60] (seconds) are depicted in Fig. After 5 seconds, the bearing errors ∥g(t)−g ∗∥ are kept within the interval [0, 5 · 10−3 ].

p. 8
Where the paper says it

Simulation results for t ∈ [0, 60] (seconds) are depicted in Fig. After 5 seconds, the bearing errors ∥g(t)−g ∗∥ are kept within the interval [0, 5 · 10−3 ].

The simulation results are consistent with the theoretical analysis of the proposed control laws. p. 9
Where the paper says it

Thus, we conclude that simulation results are consistent with the analysis. Conclusions This paper investigates bearing-constrained formation control under unknown bounded disturbances using both displacement-based and bearing-only measurements.

p. 9
Where the paper says it

Thus, we conclude that simulation results are consistent with the analysis. Conclusions This paper investigates bearing-constrained formation control under unknown bounded disturbances using both displacement-based and bearing-only measurements.

Final Conclusion on Control Strategies

The paper concludes that adaptive sliding-mode controllers uniformly stabilize the set of desired formations and completely reject the matched disturbance. Furthermore, simple smooth adaptive control laws ensure uniform ultimate boundedness of the target formation and eliminate chattering phenomenon. p. 9

Where the paper says it

Adaptive sliding-mode controllers were proposed to uniformly stabilize the set of desired formations and completely reject the matched disturbance. Furthermore, simple smooth adaptive control laws were proposed to ensure uniform ultimate boundedness of the target formation and eliminate chattering phenomenon.

p. 9
Where the paper says it

Adaptive sliding-mode controllers were proposed to uniformly stabilize the set of desired formations and completely reject the matched disturbance. Furthermore, simple smooth adaptive control laws were proposed to ensure uniform ultimate boundedness of the target formation and eliminate chattering phenomenon.

The control design strategies are applicable to other categories of leaderless formation control schemes. p. 9
Where the paper says it

5: Simulation of six-agent system under the adaptive sliding-mode bearing-only control law (19). control design strategies in this paper are applicable to other categories of leaderless formation control schemes.

References

[1] B. D. O. Anderson, C. p. 9

Where the paper says it

References [1] B. Anderson, C.

Yu, B. Fidan, and J. p. 9
Where the paper says it

Anderson, C. Fidan, and J.

M. Hendrickx, “Rigid graph control architectures for autonomous formations,” IEEE Control Systems Magazine, vol 28 no 6 pp 48–63 2008. p. 9
Where the paper says it

Hendrickx, “Rigid graph control architectures for autonomous formations,” IEEE Control Systems Magazine, vol. 48–63, 2008.

[2] K.-K. Oh, M.-C. Park, and H. p. 9

Where the paper says it

48–63, 2008. Park, and H.

-S. Ahn, “A survey of multi-agent formation control,” Automatica vol 53 pp 424–440 2015. p. 9
Where the paper says it

Ahn, “A survey of multi-agent formation control,” Automatica, vol. 424–440, 2015.

[3] T. Eren, W. Whiteley, A. p. 9

Where the paper says it

424–440, 2015. Whiteley, A.

S. Morse, P. N. Belhumeur, and B. p. 9
Where the paper says it

Whiteley, A. Belhumeur, and B.

D. O. Anderson, “Sensor and network topologies of formations with direction, bearing, and angle information between agents,” in Proc of the 42nd IEEE Conference on Decision and Control Maui HI USA vol 3 IEEE 2003 pp 3064–3069. p. 9
Where the paper says it

Anderson, “Sensor and network topologies of formations with direction, bearing, and angle information between agents,” in Proc. of the 42nd IEEE Conference on Decision and Control, Maui, HI, USA, vol.

[4] S. Zhao and D. p. 9

Where the paper says it

3064–3069. Zhao and D.

Zelazo, “Localizability and distributed protocols for bearing-based network localization in arbitrary dimensions,” Automatica vol 69 pp 334–341 2016. p. 9
Where the paper says it

Zelazo, “Localizability and distributed protocols for bearing-based network localization in arbitrary dimensions,” Automatica, vol. 334–341, 2016.

[5] H. Su, Z. Yang, S. Zhu, C. Chen, X. Guan, and L Xie, “Bearingbased multi-agent formation control: A survey and taxonomy,” Annual Reviews in Control vol 61 p 101043 2026. p. 9

Where the paper says it

Xie, “Bearingbased multi-agent formation control: A survey and taxonomy,” Annual Reviews in Control, vol. 101043, 2026.

[6] E. Montijano, E. p. 9

Where the paper says it

101043, 2026. Montijano, E.

Cristofalo, D. p. 9
Where the paper says it

Montijano, E. Cristofalo, D.

Zhou, M. Schwager, and C Sagues, “Vision-based distributed formation control without an external positioning system,” IEEE Transactions on Robotics vol 32 no 2 pp 339–351 2016. p. 9
Where the paper says it

Sagues, “Vision-based distributed formation control without an external positioning system,” IEEE Transactions on Robotics, vol. 339–351, 2016.

[7] R. Tron, J. Thomas, G Loianno, K Daniilidis, and V Kumar, “A distributed optimization framework for localization and formation control: Applications to vision-based measurements” IFAC-PapersOnLine vol 55 no 13 pp 222–227 2022. p. 9

Where the paper says it

Daniilidis, and V. Kumar, “A distributed optimization framework for localization and formation control: Applications to vision-based measurements,” Control Systems Magazine, vol.

[8] S. Doodeman, Z Tang, M Jacinto, R Cunha, and C Silvestre, “Leader-follower formation tracking control of quadrotor uavs using bearing measurements” in Proc of the IEEE Conference on Control Technology and Applications CCTA IEEE 2025 pp 970–975. p. 9

Where the paper says it

Silvestre, “Leader-follower formation tracking control of quadrotor uavs using bearing measurements,” in Proc. of the IEEE Conference on Control Technology and Applications (CCTA).

[9] M Ye, B. D. O. Anderson, and C Yu, “Bearing-only measurement self-localization, velocity consensus and formation control” IEEE Transactions on Aerospace and Electronic Systems vol 53 no 2 pp 575–586 2017. p. 9

Where the paper says it

Yu, “Bearing-only measurement self-localization, velocity consensus and formation control,” IEEE Transactions on Aerospace and Electronic Systems, vol. 575–586, 2017.

[10] S. Zhao and D Zelazo, “Bearing rigidity and almost global bearing-only formation stabilization” IEEE Transactions on Automatic Control vol 61 no 5 pp 1255–1268 2016. p. 9

Where the paper says it

Zhao and D. Zelazo, “Localizability and distributed protocols for bearing-based network localization in arbitrary dimensions,” Automatica, vol.

[11] E. Schoof, A Chapman, and M Mesbahi, “Bearing-compass formation control: A human-swarm interaction perspective” in Proc of the 2014 American Control Conference 2014 pp 3881–3886. p. 9

Where the paper says it

Silvestre, “Leader-follower formation tracking control of quadrotor uavs using bearing measurements,” in Proc. of the IEEE Conference on Control Technology and Applications (CCTA).

[12] Q V Tran, M H Trinh, D Zelazo, D Mukherjee, and H S Ahn, “Finite-time bearing-only formation control via distributed global orientation estimation” IEEE Transactions on Control of Network Systems vol 6 no 2 pp 702–712 2019. p. 0

Where the paper says it

IEEE TRANSACTIONS AND JOURNALS TEMPLATE 1 Adaptive stabilization of a leaderless bearing-constrained formation with disturbances Minh Hoang Trinh∗ , Chuong Nguyen, Quoc Van Tran, Tuynh Van Pham Abstract—In this paper, we consider the problem of regulating and maintaining a target formation characterized by a set of bidirectional bearing constraints under disturbances. The agents in the formation are modeled by single integrators with bounded continuous disturbances of which the upper bound is unavailable for the control design.

[13] S Aldarmini, A Vedyakov, and M Kakanov, “Formation control for multi-agent system with disturbances compensation” IFAC-PapersOnLine vol 55 no 13 pp 222–227 2022 proc of the 9th IFAC Conference on Networked Systems NECSYS. p. 1

Where the paper says it

The control of leaderless formation with mismatched disturbances, however, has not been considered in these works. This paper studies a distributed control strategies to achieve a desired bearing-based formation in a leaderless multi-agent system of single-integrator dynamics, under the presence of deterministic, unknown but bounded disturbances.

[14] S Zhao and D Zelazo, “Translational and scaling formation maneuver control via a bearing-based approach” IEEE Transactions on Control of Network Systems vol 4 no 3 pp 429–438 2015. p. 9

Where the paper says it

Zhao and D. Zelazo, “Localizability and distributed protocols for bearing-based network localization in arbitrary dimensions,” Automatica, vol.

[15] T T Nguyen, D V Vu, T V Pham, and M H Trinh, “Bearing-constrained leader-follower formation of singleintegrators with disturbance rejection: Adaptive variablestructure approaches” IEEE Transactions on Cybernetics vol 54 no 11 2024. p. 0

Where the paper says it

IEEE TRANSACTIONS AND JOURNALS TEMPLATE 1 Adaptive stabilization of a leaderless bearing-constrained formation with disturbances Minh Hoang Trinh∗ , Chuong Nguyen, Quoc Van Tran, Tuynh Van Pham Abstract—In this paper, we consider the problem of regulating and maintaining a target formation characterized by a set of bidirectional bearing constraints under disturbances. The agents in the formation are modeled by single integrators with bounded continuous disturbances of which the upper bound is unavailable for the control design.

[16] J Zhao, X Yu, X Li, and H Wang, “Bearing-only formation tracking control of multi-agent systems with local reference frames and constant-velocity leaders” IEEE Control Systems Letters vol 5 no 1 pp 1–6 2020. p. 9

Where the paper says it

Anderson, and C. Yu, “Bearing-only measurement self-localization, velocity consensus and formation control,” IEEE Transactions on Aerospace and Electronic Systems, vol.

[17] M H Trinh, Q V Tran, D V Vu, P D Nguyen, and H S Ahn, “Robust tracking control of bearing-constrained leader–follower formation” Automatica vol 131 p 109733 2021. p. 0

Where the paper says it

IEEE TRANSACTIONS AND JOURNALS TEMPLATE 1 Adaptive stabilization of a leaderless bearing-constrained formation with disturbances Minh Hoang Trinh∗ , Chuong Nguyen, Quoc Van Tran, Tuynh Van Pham Abstract—In this paper, we consider the problem of regulating and maintaining a target formation characterized by a set of bidirectional bearing constraints under disturbances. The agents in the formation are modeled by single integrators with bounded continuous disturbances of which the upper bound is unavailable for the control design.

[18] Y.-B Bae, H.-S Ahn, and Y. p. 9

Where the paper says it

Park, and H. Ahn, “A survey of multi-agent formation control,” Automatica, vol.

-H Lim, “Leader-follower bearingbased formation system with exogenous disturbance” in Proc of the 13th International Symposium on Applied Computational Intelligence and Informatics SACI IEEE 2019 pp 39–44. p. 9
Where the paper says it

Silvestre, “Leader-follower formation tracking control of quadrotor uavs using bearing measurements,” in Proc. of the IEEE Conference on Control Technology and Applications (CCTA).

[19] M H Trinh and H S Ahn, “Finite-time bearing-based maneuver of acyclic leader-follower formations” IEEE Control Systems Letters vol 6 pp 1004–1009 2021. p. 1

Where the paper says it

The work [19] proposed a finite-time bearing-only formation tracking strategy with unknown leader velocities based on the inverse of the minimum eigenvalue of local orthogonal projection matrices. However, the method can only be used with acyclic leader-follower graph topologies and under assumption that immediate leaders never take up collinearity positions.

[20] J J M., A Dinesh, and A K Mulla, “Bearing-only formation control of multi-agent systems using a signed protocol” in Proc of the 2024 European Control Conference ECC 2024 pp 2487–2492. p. 9

Where the paper says it

Silvestre, “Leader-follower formation tracking control of quadrotor uavs using bearing measurements,” in Proc. of the IEEE Conference on Control Technology and Applications (CCTA).

[21] S Li, Q Wang, E Wang, and Y Chen, “Bearing-only adaptive formation control using back-stepping method” Frontiers in Control Engineering vol 2 p 700053 2021. p. 1

Where the paper says it

However, the method can only be used with acyclic leader-follower graph topologies and under assumption that immediate leaders never take up collinearity positions. Bearing only leaderless formation stabilization was considered in [22], [23], where a robust adaptive gradient control strategy was employed to suppress the effects of the unknown disturbance and maintain the bearing error within a certain upper bound.

[22] Y.-B Bae, S.-H Kwon, Y.-H Lim, and H S Ahn, “Distributed bearing-based formation control and network localization with exogenous disturbances” International Journal of Robust and Nonlinear Control vol 32 no 11 pp 6556–6573 2022. p. 9

Where the paper says it

Zhao and D. Zelazo, “Localizability and distributed protocols for bearing-based network localization in arbitrary dimensions,” Automatica, vol.

[23] Y.-B Bae, Y.-H Lim, and H S Ahn, “Distributed robust adaptive gradient controller in distance-based formation control with exogenous disturbance” IEEE Transactions on Automatic Control vol 66 no 6 pp 2868–2874 2020. p. 9

Where the paper says it

Schwager, and C. Sagues, “Vision-based distributed formation control without an external positioning system,” IEEE Transactions on Robotics, vol.

[30] H. Obeid, L M Fridman, S Laghrouche, and M Harmouche, “Barrier function-based adaptive sliding mode control” Automatica vol 93 pp 540–544 2018. p. 4

Where the paper says it

We observe from simulations that a modification of adaptive law (4c) using only bearing measurements also work, however, did not found a proof for this fact. A smooth bearing-based control law A main issue in implementing sliding-mode control laws is chattering, which is due to the discontinuities of the signum function.

[31] T. R Oliveira, J P V Cunha, and L Hsu, “Adaptive sliding mode control for disturbances with unknown bounds” in Proc of the 14th International Workshop on Variable Structure Systems VSS IEEE 2016 pp 59–64. p. 1

Where the paper says it

IEEE TRANSACTIONS AND JOURNALS TEMPLATE 2 under disturbances was considered in [20], where the upper bound of the disturbances are known. Bearing-only formation disturbance rejection and tracking with unknown disturbance’s upper bound using adaptive sliding-mode control were proposed in [15].

[32] S Roy, S Baldi, and L M Fridman, “On adaptive sliding mode control without a priori bounded uncertainty” Automatica vol 111 p 108650 2020.

[33] M H Trinh and H S Ahn, Matrix-weighted graphs: Theory and Applications ser Lecture Notes in Control and Information Sciences 498 Switzerland Springer Cham 2026.

[34] D Shevitz and B Paden, “Lyapunov stability theory of nonsmooth systems” IEEE Transactions on Automatic Control vol 39 no 9 pp 1910–1914 1994. p. 9

Where the paper says it

Anderson, and C. Yu, “Bearing-only measurement self-localization, velocity consensus and formation control,” IEEE Transactions on Aerospace and Electronic Systems, vol.

[35] H K Khalil, Nonlinear systems, 3rd ed Upper Saddle River NJ Prentice Hall 2002. p. 0

Where the paper says it

Finally, simulation results are given to support the analysis. Index Terms—multi-agent systems, vision-based control, sliding-mode control, chattering alleviation I.

[38] V˙ ≤ −kpλd+2(L∗b)∥δ∥2 − Xm k=1 α 2(γk - β4) squared − Xm k=1 β4∥qk2 + ε− 1. p. 3

Where the paper says it

Let ζ = min(i,j)∈E (γij (T) − β1) = mink=1,. ,m(γk(T) − β1) > 0, we have V˙ ≤ −ζ Xm k=1 ∥Pg ∗ k zk∥1 ≤ −ζ∥Pg∗ z∥1 ≤ −ζ∥R˜ ∗ bp∥1 ≤ −ζ∥R˜ ∗ bp∥ ≤ −ζ δ ⊤L ∗ bδ 1/2 .

[39] V˙ ≤ −ζV + ∆.

Corollary 4. p. 4

Where the paper says it

Now, we impose further requirements for collision avoidance. Corollary 3.

p. 4
Where the paper says it

Now, we impose further requirements for collision avoidance. Corollary 3.

1 (Collision Avoidance 2)

Under the control law (19), if the distance between any pair of agents maintains a positive value greater than p2V(0), no collision happens between n agents for all time t ≥ 0. The final result is that p → p d as t → +∞. p. 0

Where the paper says it

vn ) that is significantly larger in comparison to agents’ size. As a result, in a canonical formulation [2], the agents can be modeled as single-integrator dynamics, with the control input being its velocity.

Corollary 4.2 (Uniform Ultimate Boundedness)

Under the control law (36), δ and γ are globally uniformly ultimately bounded, and the ultimate bound is adjustable by the control law's parameters kp, kγ, ε, and α. The proof of Theorem 4. p. 4

Where the paper says it

1 holds, and inf t≥0 ∥p d i − p d j ∥ − p 2nV (0) > 0, ∀i, j ∈ V, i ̸= j, (16) there will be no collision between n agents for all time t ≥ 0. Proof: Consider the inequality ∥p d i − p d j ∥ = ∥(p d i − pi) − (p d j − pj ) + (pi − pj )∥ ≤ ∥pi − p d i ∥ + ∥pj − p d j ∥ + ∥pi − pj∥, ≤ vuutn Xn i=1 ∥pi − p d i ∥ 2 + ∥pi − pj∥ = √ n∥δ∥ + ∥pi − pj∥, From the analysis in Theorem p 3.

2 shows that V˙ → 0 as t → +∞. The final result is that p → p d in finite time if certain conditions on γ are met. p. 6
Where the paper says it

Thus, V˙ ≤ − ς sin(α(t1))q 2λd+2(L∗ b ) | {z } ≜ϱ ∥δ∥ √ 2 ≤ −ϱV 1 2 , (29) which implies that V (t) → 0 in finite time by a similar argument as in the proof of Theorem 3. The main result of this section is given in the following theorem.

Simulation Results Summary

Simulation results demonstrate that for both bearing-based and bearing-only control laws, the bearing errors converge to zero or remain within a small bounded interval after sufficient time. The adaptive gains in the sliding mode case converge to constant values after about 5 seconds. For the smooth control law, the bearing error is kept within [0, 5 · 10−3] for t ≥ 20 seconds. The simulation results are consistent with the theoretical analysis of the proposed control laws.

Final Remark on Control Design

The paper concludes that adaptive sliding-mode controllers uniformly stabilize the set of desired formations and completely reject the matched disturbance. Furthermore, simple smooth adaptive control laws ensure uniform ultimate boundedness of the target formation and eliminate chattering phenomenon. The control design strategies in this paper are applicable to other categories of leaderless formation control schemes. p. 9

Where the paper says it

5: Simulation of six-agent system under the adaptive sliding-mode bearing-only control law (19). control design strategies in this paper are applicable to other categories of leaderless formation control schemes.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Adaptive sliding mode control for position-based formation tracking allows agents to move towards a time-varying target formation characterized by deterministic, unknown but bounded disturbances. This enables the AI system to maintain desired geometric constraints even when facing unpredictable external forces.

  2. Smooth adaptive control laws mitigate chattering phenomena by using the proposed law ui = -kpXj in Ni qij - Xj in Ni γij qij qij + epsilon. This results in a formation that is uniformly ultimately bounded, which is crucial for practical, non-oscillatory robotic deployment.

  3. Bearing-only control allows agents to stabilize the formation using only bearing measurements, addressing the requirement to reduce the number of sensors required per agent and minimizes dependence on a global reference frame. This makes the system robust in environments where visual input might be limited or signal emission must be restricted.

  4. The system can achieve tracking of desired formations defined by bearing constraints, characterized by Pgij (p'j - p'i) = 0d, for all i, j in V. This capability allows the AI to realize complex geometric shapes specified by bearing vectors rather than just absolute positions.

  5. The control design strategies are applicable to other categories of leaderless formation control schemes, suggesting the underlying adaptive and sliding mode principles are versatile for various future decentralized coordination problems.

Abstract

In this paper, we consider the problem of regulating and maintaining a target formation characterized by a set of bidirectional bearing constraints under disturbances. The agents in the formation are modeled by single integrators with deterministic bounded continuous disturbances of which both actual function and upper bound are unavailable for the control design. Due to the time-varying disturbances, the target formation is time-varying. We propose displacement/bearing-only based adaptive sliding mode control laws to uniformly asymptotically stabilize the time-varying target formation and reject the matched disturbances, and provide sufficient conditions to prevent possible collisions. A time-dependent adaptive design method is provided to convert the displacement-based control law to a bearing-only one. In addition, to alleviate chattering phenomena from sliding mode control, smooth adaptive control laws are introduced to guarantee uniform global boundedness of the desired formation. Finally, simulation results are given to support the analysis.

Related papers