Radiative pion-pair production in disperon QED

arXiv:2609.00912 · hep-ph · Submitted 2026-09-01 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Radiative pion-pair production in disperon QED".

Title and authors: Kai: So we're looking at this paper titled "Radiative pion-pair production in disperon QED." It’s by Fang and Kollatzsch and Signer and Zoller. Basically, they use a new method based on Disperon QED to calculate the radiative pion-pair production process at next-to-leading order.

Mira: That sounds like they're using some kind of quantum field theory approach to handle how pions interact with photons in these electron-electron collisions. It’s about calculating this process, ee to pi pi gamma, which is a key input for understanding the anomalous magnetic moment of the muon.

Lev: So it’s not just a calculation; they are implementing this within the Monte Carlo framework called McMule. That means they’re looking at how these theoretical predictions translate into something you can actually run on real hardware and see data from.

Kai: Right, so what they are doing is calculating the process at next-to-leading order and fitting in the pion vector form factor using a form-factor scalar QED approximation where it makes physical sense. They're also looking at corrections that go beyond that approximation to get an idea of the theory uncertainty.

Mira: That uncertainty is important because it helps us figure out how much we can trust our experimental measurements, especially when we are trying to resolve those tensions between different ways of measuring the muon’s magnetic moment.

Lev: From an engineering standpoint, they're focusing on what’s actually calculable in this framework, which they call the initial state corrections or ISC and a specific part of the mixed corrections. That tells us where the complexity really lies for real hardware implementation.

Kai: They found that these specific subsets are reliably calculated using their form-factor scalar QED method, and they have some preliminary results for scenarios like KLOE experiments, showing impacts on those cross sections.

Mira: The paper points out that the initial state corrections can reach up to fifteen to twenty percent compared to the full leading order result in the large angle scenario for KLOE-like conditions. That’s a pretty significant correction size.

Lev: And they also noted that mixed corrections, which involve interactions between initial and final states, show an impact of about fifteen percent, but they change the shape of the distribution rather than just adding a flat offset.

Kai: The paper also makes a distinction between what's reliably calculable and what requires estimation using a hadronic counting parameter, lambda hadron. They use this to handle those more challenging contributions in certain parts of the process, specifically in the q4e q4pi subclass.

Mira: That estimation method uses selection rules that drop contributions scaling with lambda hadron squared and also drop radiative corrections to the Compton tensors in those specific cases. It’s a way to manage the technical difficulty when things get too complicated for a simple approximation like FsQED.

Title and authors: Lev: From an implementation view, they also describe an automated amplitude generation pipeline using OpenLoops that uses their disperon QED model to handle the complicated expressions when applying the dispersion relation to every form factor that depends on loop momentum. That sounds like a big help for simplifying the code structure.

Kai: And they introduce a threshold counterterm expression in appendix A which defines a function, let's call it f, that accounts for the singular part of the diagram when the energy is at or near the threshold for pion-pair production.

Mira: That counterterm is important because it allows them to analytically evaluate parts of the dispersive integral within their Monte Carlo simulations, which saves a lot of computational time.

Lev: So they’re trying to make this work by combining these theoretical tools—the FsQED approximation, the lambda hadron estimation, and the automated amplitude generation—to get a manageable calculation.

Kai: For the phenomenological results, they used the vector form factor defined in reference four five for KLOE-like scenarios, looking at both large-angle and small-angle cases. They found that for the large angle scenario, those initial state corrections can be up to fifteen to twenty percent of the leading order result.

Mira: And they also mentioned that the impact of mixed corrections is around fifteen percent in those same conditions, but it definitely modifies the shape of how we see things in our data.

Lev: The small-angle scenario showed smaller impacts for both the initial state corrections and those specific mixed corrections compared to the large-angle case, which is a useful comparison point.

Kai: The paper suggests two paths forward: technically, they plan to advance beyond NLO matched to a parton shower for initial state corrections in future calculations, maybe toward NNLO.

Mira: Conceptually, they suggest using a more sophisticated description of the Compton tensor itself. They mention approximating the gamma star gamma star pi pi interaction by using resonance approximations like the rho seven hundred seventy zero meson decaying into two pions.

Lev: That would be a big conceptual step because it moves away from just treating those interactions as simple poles and tries to include more structure in how photons interact with those pions.

Kai: So the overall goal seems to be providing a set of corrections that are physically motivated and can be calculated reliably, so we can compare them against the full set of corrections to get a better idea of the theory uncertainty.

Mira: Exactly. The paper points out that they found reliable subsets for calculation, namely the initial state corrections and that specific subset of mixed corrections involving q five e and q three pi.

Title and authors: Lev: And they also say they need to compare these results with a full set of calculations to get a lower estimate of the theory uncertainty associated with ee to pi pi gamma.

Kai: The first indication is that for the KLOE-like large angle scenario, those initial state corrections can be up to fifteen percent w.r.t. the leading order result, and that's a noticeable effect we need to keep an eye on for experimental setups aiming at those kinematics.

Mira: It’s interesting how the small-angle scenario showed significantly smaller impacts for both the initial state corrections and that specific mixed correction compared to the large-angle case, which tells us about the sensitivity of our observables in different regions.

Lev: So, to wrap up on what they did with "Radiative pion-pair production in disperon QED," they provided a method using FsQED for a subset of corrections that is reliably calculable, and they used this to predict impacts on KLOE-like scenarios.

Kai: And the path forward involves getting better technical handling of those initial state effects and developing more sophisticated ways to describe the Compton tensor interactions.

Mira: It all comes down to using these physically motivated subsets to estimate theory uncertainty so we can better compare our theoretical predictions with experimental measurements in the future.

Lev: For my part, it means that running this on real hardware requires us to be very careful about how we handle these approximations and what the overhead lands on when we try to scale up the calculation.

Kai: That’s a good point, Lev. So, looking ahead at this paper, it seems they're setting up a framework where theory uncertainty can actually be quantified in a way that helps guide future experimental design for these kinds of high-precision measurements.

Mira: It gives us tools to compare our model assumptions—like the form factor approximation versus more complex ones—against the actual physics we observe at the experiment level.

Lev: And that comparison is what drives the next steps, because if we don't have a reliable way to calculate those difficult parts, we can't really constrain our models with real data.

Kai: So, to conclude on this paper about "Radiative pion-pair production in disperon QED," it shows that by focusing on physically motivated subsets of corrections, we get calculable results that give us a tangible measure of the theory uncertainty for electron-electron collisions involving pions and photons.

Mira: That’s right. It’s not about getting one perfect calculation; it’s about having a structured way to estimate how much uncertainty we have when we try to connect theory to the muon magnetic moment measurements.

Lev: And that structure, built with automated tools and careful handling of the dispersion relations, is what makes this work feasible for real hardware use.

The paper's summary: Kai: So to quickly recap, these authors have taken radiative pion pair production in disperon QED and used it to calculate corrections at next-to-leading order for processes like electron plus electron colliding to make a pion pair and a photon.

Mira: Exactly. They're looking at how the interactions between those pions and photons work when you go beyond the simplest leading order calculations. It’s about refining the theory side of things so we can better understand what we see in experiments.

Lev: From where I sit, what this paper really tackles is making sense of all that complicated hadronic input—the stuff that's not purely QED—and fitting it into a way that actually runs on a computer, you know, without the math becoming completely impossible to handle.

Kai: Right. They identify specific parts of these corrections—initial state corrections and certain mixed corrections—that they can calculate reliably using this form-factor scalar QED method they developed.

Mira: That’s the crucial part for me. It means they have a clean way to isolate the physical effects that are most important, so we don't get lost in all the noise when we try to estimate that big theory uncertainty.

Lev: And when you look at their results for things like KLOE experiments, they show that those initial state corrections can be up to fifteen or twenty percent compared to the basic leading order result in the large angle case. That’s a big number for an effect you're trying to measure.

Kai: It really is a big number because it shows that these things aren't just tiny adjustments; they can significantly shift what we predict for those specific experimental setups at high energy levels.

Mira: And they also show that the mixed corrections, which are interactions between different stages of the process, have an impact around fifteen percent, and what’s interesting is that it changes the shape of the distribution rather than just adding a flat amount to it.

Lev: That shape change is important for me because if you're building hardware, you need to know if this correction is just a vertical shift or if it's warping the whole curve, because that affects how we look for signals.

Kai: So the main implication here is they’ve created a framework where we can take these physically motivated subsets of corrections and compare them against the full set to get a lower bound on our theory uncertainty.

Mira: That gives us a much better handle on what we don't know theoretically, which helps us decide where our next experimental efforts should be focused.

Lev: And they point out that to really push this further, technically we need to advance those initial state corrections beyond next-to-leading order for things like the parton shower matching.

Kai: So it seems like they’re laying down a solid foundation by finding these calculable subsets and then clearly outlining what the next technical steps look like for pushing that calculation to even higher orders.

Mira: It’s about moving from just having an idea of how uncertainty scales to actually being able to quantify that uncertainty for specific experimental scenarios, which is exactly what we need right now.

Lev: So next up, we're going to talk about how they plan to use this framework, specifically looking at those conceptual improvements they mentioned for describing the Compton tensor interactions.

The paper's improvements: Kai: So, looking at what they suggested to fix things, they're pointing out that there are two main directions for improvement: technical and conceptual stuff.

Mira: Technically, they want to push the initial state corrections even further than next-to-leading order when matching it with the parton shower framework.

Lev: That would mean moving toward a calculation at next-to-next-to-leading order, which is computationally expensive but necessary if you want those predictions to be really precise for real hardware.

Kai: And conceptually, they are looking at making a more sophisticated description of that Compton tensor itself, because just using the pion pole approximation isn't enough anymore.

Mira: They specifically suggest approximating the interaction between gamma star gamma star and pi pi by using resonance approximations like that rho seven hundred seventy zero meson decaying into two pions.

Lev: That’s a big conceptual step because it tries to include more structure in how photons interact with those pions, moving beyond just treating them as simple poles.

Kai: It sounds like they want to provide a physically motivated subset of corrections that you can actually compute reliably, so we can use that as a benchmark for the full set of corrections.

Mira: Exactly. They want to isolate the parts where the physics makes sense and leave out the overly complicated parts that just add noise or computational burden without adding much physical insight.

Lev: From an engineering view, this is great because it helps us decide which calculations are worth spending time building into our Monte Carlo pipeline for real hardware simulations.

Kai: They also mentioned using a systematic method to classify those initial state and mixed corrections so we can reliably calculate the ones that fit their form-factor scalar QED prescription.

Mira: That classification system is key because it lets us find those reliable subsets, like that specific subset involving q five e and q three pi, where the calculation works out cleanly.

Lev: And they also want to implement an automated amplitude generation pipeline using OpenLoops to handle all those complicated expressions when you apply the dispersion relation to every form factor that depends on loop momentum.

Kai: That would be a huge win for implementation because it cuts out a lot of tedious manual work and lets us use our existing Monte Carlo tools much more effectively.

Mira: So they're trying to build this bridge between the complex theoretical math and something we can actually run efficiently in a simulation environment.

Lev: And they also introduced a threshold counterterm expression, which replaces the problematic part of the integrand with a counterterm as defined in that appendix A.

Kai: That counterterm lets them analytically evaluate parts of the dispersive integral inside their Monte Carlo simulations, which saves significant computation time.

Mira: It’s about making the simulation faster and more accurate by using those analytical shortcuts where they are valid, so we don't have to brute-force every single part of the integral.

Lev: So it’s a multi-pronged approach: better theory descriptions, better classification for reliable subsets, and smarter computational tools like that counterterm.

Kai: The overall goal is to provide a set of corrections that are physically motivated and can be calculated reliably so we can compare them against the full set of corrections to get a better idea of the theory uncertainty.

Mira: It’s about having a structured way to estimate how much uncertainty we have when we try to connect theory to the muon magnetic moment measurements, which is what really matters for our work.

Lev: And that structure, built with automated tools and careful handling of the dispersion relations, is what makes this whole thing feasible for real hardware use.

Kai: It seems like they're setting up a framework where theory uncertainty can actually be quantified in a way that helps guide future experimental design for these kinds of high-precision measurements.

Conclusion: Kai: So to wrap up, these authors tackled radiative pion pair production in disperon QED and found that by focusing on those physically motivated subsets of corrections, they can get calculable results for KLOE-like scenarios.

Mira: They showed that while the initial state corrections can reach fifteen or twenty percent in the large angle case, the mixed corrections show a fifteen percent impact but modify the distribution shape instead.

Lev: And they laid out a clear path forward, focusing on pushing those initial state corrections to next-to-next-to-leading order and using more sophisticated descriptions of the Compton tensor.

Kai: So it's really about building a structured way to estimate theory uncertainty by focusing on what we can actually calculate reliably, even when things get complicated.

Mira: It gives us tools to compare our model assumptions against the actual physics we see at the experiment level, which is exactly what we need for guiding future experiments.

Lev: For me, it means that running this on real hardware requires us to be very careful about how we handle those approximations and where the computational overhead actually lands when you try to scale up the calculation.

Kai: It seems like they're setting up a framework where theory uncertainty can actually be quantified in a way that helps guide future experimental design for these kinds of high-precision measurements.

Mira: It’s not about getting one perfect calculation; it’s about having a structured way to estimate how much uncertainty we have when we try to connect theory to the muon magnetic moment measurements.

Lev: And that structure, built with automated tools and careful handling of the dispersion relations, is what makes this whole thing feasible for real hardware use.

Kai: So that’s it for this deep dive into radiative pion pair production in disperon QED.

Mira: We'll be looking at how they apply these methods to other processes next time we talk about how QCD affects particle decays.

Lev: And I’m looking forward to discussing the computational feasibility of those higher order corrections in our next segment.

PSI Center for Neutron and Muon Sciences · Physik-Institut, University of Zurich

hep-ph

Submitted: 2026-09-01

Updated: 2026-11-17

Importance score: 79/100

The gist: Radiative pion-pair production in disperon QED calculates NLO corrections to ee → ππγ within a Monte Carlo framework…

Key concepts

Form-factor times scalar QED (FsQED)
This is a specific theoretical framework used to model the interaction vertex involving the pion's non-perturbative vector form factor. It involves applying a dispersion relation that moves this form factor inside an additional integral, allowing for calculations within the context of QED loop processes.
Classification of Corrections
The NLO corrections to ee -> ππγ are divided into three types: Initial State Corrections (ISC), Final State Corrections (FSC), and Mixed Corrections. This classification is crucial because it determines which subsets can be calculated reliably using the FsQED prescription, helping to isolate the most tractable parts of the theory.
Hadronic Counting Parameter ($\lambda_{hadron}$)
This parameter is used as an estimation tool to handle complex contributions in certain classes of mixed corrections that are difficult to calculate directly. It involves applying selection rules that drop contributions scaling with $\lambda^2_{hadron}$ and removing radiative corrections to Compton tensors, providing a way to estimate the impact of uncalculated terms.
Compton Tensor ($\gamma^*\gamma^* \rightarrow \pi\pi$)
The Compton tensor describes the interaction between two virtual photons and a pion pair. In this paper, it is central to calculating mixed corrections. The study focuses on using resonance approximations, such as $\gamma^*\gamma^*\gamma \rightarrow \rho(770) \rightarrow \pi\pi$, to refine these calculations beyond simple pole approximations.

Terminology

Summary

Radiative pion-pair production in disperon QED calculates NLO corrections to ee → ππγ within a Monte Carlo framework, providing insight into theory uncertainty for experimental scenarios

Theoretical Framework and Challenges

The paper addresses the technical and conceptual challenges involved in incorporating hadronic input into loop processes for ee → ππγ. For the process ee → ππγ, the interaction vertex includes a non-perturbative vector form factor (VFF) F V π. p. 1 Technical challenges arise from bringing complicated hadronic input into a form compatible with loop integration in ee → ππγ. p. 1 Approaches like form-factor times scalar QED (F×sQED) and generalized vector-meson dominance (GVMD) are discussed as ways to model the Compton tensors required for ee → ππγ. p. 1 The distinction between F×sQED and form-factor scalar QED (FsQED) is crucial, with FsQED being defined by applying a dispersion relation that moves the VFF inside an additional dispersive integral. p. 1

Classification of Corrections

Contributions to ee → ππγ are split into initial-state corrections (ISC), final-state corrections (FSC), and mixed corrections. The ISC only contain radiative corrections associated with the electron line, where only the pion VFF multiplied externally is required. p. 1 FSC describe corrections exclusively on the pion side, which are extremely difficult and FsQED might not provide a reliable prediction for them. p. 2 Mixed corrections describe interactions and interference effects between initial and finite states, requiring Compton tensors (γ∗)2+k → ππ and radiative corrections thereof. p. 2

Reliable Calculation Subset

The paper identifies that ISC and the q5e q3π subset of mixed corrections are the only subsets of the full set of NLO corrections that can be calculated reliably in FsQED. For this subset, the technical definition of FsQED coincides with the original one. p. 3 The remaining contributions, particularly those involving radiative corrections to Compton tensors in the q4e q4π subclass, are challenging and require an estimation method based on a hadronic counting parameter λhadr. p. 5 This estimation involves selection rules that drop contributions scaling as λ2hadr and drop radiative corrections to Compton tensors. p. 4

Phenomenological Results

The results present phenomenological predictions for KLOE-like scenarios, including large-angle and small-angle cases, using the VFF defined in [45]. For the KLOE-like large-angle scenario, the NLO ISC reach up to 15–20% compared to the full LO result. p. 8 The impact of mixed corrections is also around 15%, but they clearly modify the shape of the distribution. p. 9 The KLOE-like small-angle scenario shows significantly smaller impacts for both NLO ISC and σ(1)mixed FsQEDq5e q3π compared to the large-angle case. p. 8

Future Directions

Two avenues for refining the prediction are technical and conceptual. On the technical side, advancing corrections associated with the electron line, such as ISC effects beyond NLO matched to a parton shower [7], is planned for NNLO calculations. p. 1 Conceptually, progress could be made by using a more sophisticated description of the Compton tensor. p. 6 This includes considering effects beyond the pion pole approximation for F×sQED, such as approximating γ∗γ∗γ → ππ with γ∗γ∗γ → ρ(770) → ππ. p. 0 The aim is to provide a physics-motivated subset of corrections that can be computed reliably, allowing for a comparison with the full set of corrections to estimate theory uncertainty. p. 6

Threshold Counterterm

A threshold counterterm expression is provided in Appendix A for ee → ππγ. This expression defines the function f which accounts for the singular part of the diagram at s1 = sths, where sths is related to the momentum transfer available for pion-pair production. p. 7 The complex definition of f involves various kinematic variables and logarithms. p. 6

References

[1] R. Aliberti et al., The anomalous magnetic moment of the muon in the Standard Model: an update, Phys. p. 1 Rept. 1143 (2025) 1 [2505.21476].

[2] S. Borsanyi et al., Leading hadronic contribution to the muon magnetic moment from lattice QCD, Nature 593 (2021) 51 [2002. p. 112347].

[3] RBC, UKQCD collaboration, T. Blum et al., Update of Euclidean windows of the hadronic vacuum polarization, Phys. p. 1 Rev. D 108 (2023) 054507 [2301.08696].

[4] D. Djukanovic, G. von Hippel, S. Kuberski, H. B. Meyer, N. Miller, K. Ottnad et al., The hadronic vacuum polarization contribution to the muon g − 2 at long distances, JHEP 04 (2025) 098 [2411. p. 107969].

[5] Muon g − 2 collaboration, D. p. 0 P. Aguillard et al., Measurement of the Positive Muon Anomalous Magnetic Moment to 127 ppb, Phys. p. 1 Rev. Lett. 135 (2025) 101802 [2506.03069].

[6] R. Aliberti et al., Radiative corrections and Monte Carlo tools for low-energy hadronic cross sections in e +e− collisions, SciPost Phys. p. 1 Comm. Rep. 2025 (2025) 9 [2410.22882].

[7] E. Budassi, C. M. Carloni Calame, M. Ghilardi, A. Gurgone, G. Montagna, M. Moretti et al., Radiative return at NLOPS accuracy, JHEP 05 (2026) 221 [2601. p. 119530].

[8] V. S. Fadin and R. N. Lee, Two-loop radiative corrections to e +e− → γγ∗ cross section, JHEP 11 (2023) 148 [2308. p. 509479].

[9] S. Badger, J. Kry´s, R. Moodie and S. Zoia, Lepton-pair scattering with an off-shell and an on-shell photon at two loops in massless QED, JHEP 11 (2023) 041 [2307. p. 203098].

[10] P. Petit Ros´as and W. J. Torres Bobadilla, Fast evaluation of Feynman integrals for Monte Carlo generators, JHEP 09 (2025) 210 [2507. p. 012548].

[11] M. Pozzoli and W. J. Torres Bobadilla, First look at the evaluation of two-loop Feynman integrals for radiative return processes, 2607.03343.

[12] Sophie Kollatzsch on behalf of the McMule team, McMule update, in 9th Plenary Workshop of the Muon g − 2 Theory Initiative, (Storrs), 2026, https://indico. p. 0phys.uconn.edu/event/3/contributions/114/. p. 0

[13] G. Colangelo, M. Hoferichter, M. Procura and P. Stoffer, Dispersion relation for hadronic light-by-light scattering: theoretical foundations, JHEP 09 (2015) 074 [1506. p. 101386].

[14] E. Kaziuk˙enas, Dispersive definition of γ∗γ∗γ → π+π− for muon g − 2 applications, in RadioMonteCarLow 2 Satellite 2025, (Liverpool), 2025, https://indico.ph.liv.ac.uk/event/2169/contributions/10215/. p. 0

[15] J. J. Sakurai and D. Schildknecht, Generalized vector dominance and inelastic electron - proton scattering, Phys. p. 1 Lett. B 40 (1972) 121.

[16] F. Ignatov and R. N. Lee, Charge asymmetry in e +e− → π+π− process, Phys. p. 2 Lett. B 833 (2022) 137283 [2204.12235].

[17] P. Petit Ros´as, O. Shekhovtsova and W. J. Torres Bobadilla, Radiative return meets GVMD, 2603. p. 113171.

[18] C. M. Carloni Calame, M. Ghilardi, A. Gurgone, G. Montagna, M. Moretti, O Nicrosini et al., Structure-dependent radiative corrections to e +e− → π+π−γ in the GVMD approach, Phys. p. 1 p. 1 Lett. B 879 (2026) 140666 [2603. p. 0 p. 028621].

[19] G. Colangelo, M. Hoferichter, M. Procura and P Stoffer, Dispersive approach to hadronic light-by-light scattering, JHEP 09 (2014) 091 [1402. p. 17081].

[20] G. Colangelo, M. Hoferichter, J. Monnard and J. R de Elvira, Radiative corrections to the forward-backward asymmetry in e +e− → π+π−, JHEP 08 (2022) 295 [2207. p. 103495].

[21] Y. Fang, S. Kollatzsch, M. p. 0 Rocco, A Signer, Y. p. 0 Ulrich and M Zoller, Disperon QED, SciPost Phys. p. 0 20 (2026) 116 [2512. p. 010709].

[22] C. M. Carloni Calame, M. Ghilardi, A Gurgone, G Montagna, M Moretti, O Nicrosini et al., Next-to-leading order FsQED corrections to radiative pion pair production, 2607. p. 124642.

[23] H. Czyz, A Grzelinska, J. H Kuhn and G Rodrigo, The Radiative return at Phi and B factories: FSR at next-to-leading order, Eur. p. 1 Phys. J. C 33 (2004) 333 [hep-ph/0308312]. p. 0

[24] S. Tracz, Radiative corrections to hadrons-photons interactions, Ph. p. 2D. thesis, University of Silesia, 2018.

[25] F. Campanario, H. Czy˙z, J Gluza, T Jeli´nski, G Rodrigo, S Tracz et al., Standard model radiative corrections in the pion form factor measurements do not explain the aµ anomaly, Phys. p. 1 Rev. D 100 (2019) 076004 [1903.10197].

[26] Lorenzo Punzi on behalf of the KLOE-2 Collaboration, Status of the KLOE-NXT Analysis, in 9th Plenary workshop of the Muon g − 2 Theory Initiative 2026, (University of Connecticut), 2026, https://indico. p. 2phys.uconn.edu/event/3/contributions/129. p. 0

[27] F. Ignatov and G. Venanzoni, Private communications, 2026. p. 0

[28] M Hoferichter, G Colangelo, M Procura and P Stoffer, Virtual photon-photon scattering, Int. p. 1 J Mod. Phys. Conf. Ser. 35 (2014) 1460400 [1309.6877].

[29] M Hoferichter and P Stoffer, Dispersion relations for γ∗γ∗ → ππ: helicity amplitudes, subtractions, and anomalous thresholds, JHEP 07 (2019) 073 [1905. p. 213198].

[30] J. L¨udtke, M. Procura and P Stoffer, Dispersion relations for hadronic light-by-light scattering in triangle kinematics, JHEP 04 (2023) 125 [2302. p. 212264].

[31] E. Lymperiadou, Updates on dispersive analysis for γ∗γ∗γ → π+π−, in RadioMonteCarLow 2 Workshop 2026, (Torino), 2026, https://indico. p. 0global/event/16381.

[32] J. Monnard, Radiative corrections for the two-pion contribution to the hadronic vacuum polarization contribution to the muon g − 2, Ph. p. 1D. thesis, Bern U., 2021.

[33] M Hoferichter, Rescattering corrections to the pion Compton tensor, in RadioMonteCarLow 2 Satellite 2025, (Liverpool), 2025, https://indico. p. 2ph.liv.ac.uk/event/2169/contributions/10214/. p. 0

[34] E. Budassi, C. M. Carloni Calame, M Gurgone, G Montagna, M Moretti et al., Pion pair production in e +e− annihilation at next-to-leading order matched to Parton Shower, JHEP 05 (2025) 196 [2409. p. 103469].

[35] C. M. Carloni Calame, M Gurgone, G Montagna, M Moretti, O Nicrosini et al., Structure-dependent radiative corrections to e +e− → π+π−γ in the GVMD approach, Phys. Lett. B 879 (2026) 140666 [2603.28621].

[36] P Banerjee, T Engel, A Signer and Y Ulrich, QED at NNLO with McMule, SciPost Phys. p. 0 9 (2020) 027 [2007.01654].

[37] McMule Team, “McMule manual. p. 0” https://doi. p. 2 p. 2org/10.5281/zenodo.6046769.

[38] G Colangelo, M Hoferichter, M Procura and P Stoffer, Dispersion relation for hadronic light-by-light scattering: two-pion contributions, JHEP 04 (2017) 161 [1702. p. 607347].

[39] T. Aoyama et al., The anomalous magnetic moment of the muon in the Standard Model, Phys. p. 1 Rept. 887 (2020) 1 [2006.04822].

[40] D. R. Yennie, S C Frautschi and H Suura, The infrared divergence phenomena and high-energy processes, Annals Phys. p. 5 13 (1961) 379.

[41] T Engel, A Signer and Y Ulrich, A subtraction scheme for massive QED, JHEP 01 (2020) 085 [1909. p. 010244].

[42] F Buccioni, S Pozzorini and M Zoller, On-the-fly reduction of open loops, Eur. p. 0 Phys. J. C 78 (2018) 70 [1710.11452].

[43] F Buccioni, J.-N Lang, J M Lindert, P Maierh¨ofer, S Pozzorini, H Zhang et al., OpenLoops 2, Eur. p. 6 Phys. J. C 79 (2019) 866 [1907.13071].

[44] S Kollatzsch, Beyond QED: Electroweak and hadronic extensions of McMule, in 17th International Symposium on Radiative Corrections: Applications of Quantum Field Theory to Phenomenolog, 3, 2026, 2603. p. 009443.

[45] G Colangelo, M Hoferichter and P Stoffer, Two-pion contribution to hadronic vacuum polarization, JHEP 02 (2019) 006 [1810. p. 100077].

[46] McMule Team, “McMule dataset. p. 0” https://doi.org/10.5281/zenodo.8188752.

[47] M Hoferichter, Thoughts on rescattering corrections, in RadioMonteCarLow 2 Workshop 2026, (Torino), 2026, https://indico. p. 0global/event/16381.

[48] M Hoferichter, Towards mixed initial- and final-state corrections to e +e− → π+π−γ beyond scalar QED, 2026. p. 1

[49] A Denner and S Dittmaier, Reduction of one loop tensor five point integrals, Nucl. p. 3 Phys. B 658 (2003) 175 [hep-ph/0212259]. p. 0

[50] Z. Bern, L. J Dixon and D A Kosower, Dimensionally regulated one loop integrals, Phys. p. 5 Lett. B 302 (1993) 299 [hep-ph/9212308]. p. 0

[51] Z. Bern, L. J Dixon and D A Kosower, Dimensionally regulated pentagon integrals, Nucl. Phys. B 412 (1994) 751 [hep-ph/9306240]. p. 0

[52] R. K Ellis and G Zanderighi, Scalar one-loop integrals for QCD, JHEP 02 (2008) 002 [0712. p. 01851].

Conclusion and Outlook

The work presents results for NLO corrections that can be reliably calculated within FsQED Beside the previously known ISC, this is the q5e q3π subset of mixed corrections. While they have a negligible impact for scenarios at higher √s, they can reach several percent w. p. 9r.t. σISC1 for the KLOE-like scenarios. p. 8 The KLOE-like large-angle scenario is most affected, and the subset only contains the Compton tensor γ∗γ∗ → ππ. p. 8 Two avenues for refining the prediction are technical (advancing ISC effects to NNLO) and conceptual (using more sophisticated descriptions of Compton tensors). p. 1 A comparison with a calculation of the full set of corrections will provide a lower estimate of the theory uncertainty associated with ee → ππγ. p. 6 The first indications suggest a noticeable impact for the KLOE-like largeangle scenario. p. 9

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improve Monte Carlo code implementation by integrating Disperon QED methods to handle complicated data input in general loop processes, as described in Based on the previously developed disperon QED method for incorporating data input into loop processes in Monte Carlo codes.

  2. Enhance theoretical uncertainty estimation for ee -> pi pi gamma by considering contributions beyond the form-factor scalar QED approach where it is less well justified, gaining insight into the associated theory uncertainty for selected experimental scenarios.

  3. Develop a systematic method to classify NLO corrections into initial state corrections (ISC), final state corrections (FSC), and mixed corrections, allowing reliable calculation of those that can be computed within the form-factor scalar QED prescription.

  4. Implement a hadronic counting parameter lambda hadron and selection rules to estimate the impact of contributions beyond q5e q3 pi in the q4e q4 pi subclass, using rules like The selected diagrams are highlighted in purple in Figure 1b.

  5. Create an automated amplitude generation pipeline using OpenLoops with a dedicated disperon QED model to handle the Tedious expressions arising from applying the dispersion relation to every VFF that depends on the loop momentum.

  6. Implement threshold divergence subtraction by replacing the integrand in integral (4) with a counterterm (CT) as defined in equation (7), allowing for analytical evaluation of parts of the dispersive integral within Monte Carlo simulations.

  7. Integrate a physical motivation for approximating contributions to gamma star gamma star pi pi with gamma star star pi plus using resonance approximations like "gamma star star gamma -> rho(770) -> pi pi."

Sources

Related papers