Spin-dependent fermion potentials from mixed tensor couplings of massive spin-1 and spin-2 bosons

arXiv:2608.30240 · hep-ph, nucl-th, physics.atom-ph · Submitted 2026-08-31 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Spin-dependent fermion potentials from mixed tensor couplings of massive spin-1 and spin-2 bosons".

Paper summary: Kai: So to wrap up this paper, it’s about deriving finite range two fermion potentials from mixed tensor couplings of massive spin-one and spin-two bosons. The main thrust is showing how these mixed vertices create new P odd and T even interactions that arise when you consider both spin-one and spin-two mediators together.

Mira: And the implication for me is that it connects some previously separate sectors, showing that the standard vector dipole sector isn't enough to describe everything we see in these types of experiments.

Lev: From a hardware standpoint, if we can map these new interaction limits onto our existing basis, it gives us concrete numbers on what those coupling products must be for any given mediator mass.

Kai: The paper also states that the mixed tensor axial tensor interaction for the spin-two mediator is P odd but T even, which means it doesn't generate a T odd potential in that minimal setup.

Mira: It’s a unified starting point because they are using these derived results to interpret macroscopic fifth force measurements, precision spin experiments, and atomic or molecular tests using these massive spin-one and spin-two mediators.

Lev: The paper also notes a limitation: the heavy mediator limit yields local derivative operators, whereas a genuine massless graviton is restricted by gauge invariance to conserved symmetric sources and gives the usual P even time even gravitational interaction.

Kai: So they are giving us a way to look at those fifth force measurements through the lens of massive spin-one and spin-two mediators.

Mira: The result is that these mixed vertices produce operator combinations not found when you treat the vector and dipole sectors separately, which is a significant piece of information.

Conclusion: Kai: So we've been diving into these potentials from mixed spin one and spin two couplings, but what does this paper actually conclude about them?

Mira: Well, they're showing how those mixed vertices generate operator combinations that you just don't get if you look at the vector and dipole sectors separately.

Lev: So what does that mean for the actual physics we’re trying to measure on hardware right now?

Kai: It means this framework gives us a unified starting point to interpret macroscopic fifth force measurements, precision spin experiments, and even atomic tests using these massive spin one and two mediators.

Mira: Exactly. The authors are providing a set of constraints derived from mapping these new interactions onto the sixteen potential basis. This lets you translate existing experimental limits into hard numbers on those coupling products for both small and large mediator masses.

Lev: And what's the kicker with the spin two part? Does it actually predict something new that doesn't already exist in standard gravity?

Kai: The paper shows that the mixed tensor axial tensor interaction for the spin two mediator is P odd but T even. That means it doesn't generate a T odd potential in that minimal setup.

Mira: But they also show how you can reinterpret the common V1 component between the spin one axial tensor and the spin two tensor axial exchange. It gives a specific scaling relationship between those couplings.

Lev: From an engineering standpoint, that mapping to those basis structures is what makes this useful for translating published exclusion plots into actual limits on your coupling strengths.

Kai: It’s really about building a bridge between high-level theory and the constraints we get from the lab equipment. The next thing we need to look at is how these limits actually scale with the mediator mass itself.

School of Physics, University of New South Wales

hep-ph, nucl-th, physics.atom-ph

Submitted: 2026-08-31

Updated: 2026-11-18

The gist: Spin-dependent fermion potentials from mixed tensor couplings of massive spin-1 and spin-2 bosons derive finite-range coordinate-space potentials generated by a massive spin-1 boson with various…

Key concepts

Spin-1 Potentials
These are finite-range coordinate-space potentials generated by a massive spin-1 boson interacting with fermions via various couplings like vector, axial-vector, tensor, and pseudotensor. The derivation yields specific structures like spin–spin/tensor terms and monopole–dipole features.
Spin-2 Mediator
The analysis extends the framework to a massive spin-2 field described by a symmetric Fierz–Pauli field. It investigates its interactions, including conventional couplings and nonconserved axial counterparts, revealing P, T even or P odd and T even interactions.
Mapping to Rotationally Invariant Basis
Derived interactions are translated into the sixteen-potential Dobrescu–Mocioiu basis using a Hermitian mapping. This allows experimental constraints to be converted into numerical limits on coupling products in both small and large mediator-mass regimes.
P, T Odd/Even Interactions
The research identifies new interaction types, such as P odd but T even (e.g., axial-vector–tensor) and P even but T odd (e.g., axial-vector–pseudotensor). These structures are crucial for interpreting experimental data beyond standard interactions.

Terminology

Summary

Spin-dependent fermion potentials from mixed tensor couplings of massive spin-1 and spin-2 bosons derive finite-range coordinate-space potentials generated by a massive spin-1 boson with various couplings to Dirac fermions, and extend this framework to a massive spin-2 mediator, revealing new P, T odd and T even interactions

Derivation of Spin-1 Potentials

The paper derives finite-range coordinate-space potentials generated by a massive spin-1 boson with vector, axial-vector, tensor, and pseudotensor couplings to Dirac fermions The authors obtain mixed vector–tensor, vector–pseudotensor, axial-vector–tensor, and axial-vector–pseudotensor potentials alongside tensor–tensor, tensor–pseudotensor, and pseudotensor–pseudotensor terms They retain contact terms necessary for atomic-scale applications and provide compact expressions including both orderings of inequivalent fermion vertices For the vector–tensor interaction, the complete result is given by a four-term expression containing momentum-suppressed central interaction V1, spin–spin/tensor terms V2 + V3, and spin–orbit structures V4,5 The vector–pseudotensor interaction yields a monopole–dipole structure while the second term contains the q 2V14 ± V15 combination and is odd under both P and T The axial-vector–tensor potential contains momentum-suppressed V12,13 terms and the V11 spin–spin structure, both being P odd and T even The axial-vector–pseudotensor cross term is P even but T odd, which is a linear combination of the two V6,7 operators

Extension to Massive Spin-2 Mediator

The analysis extends to a massive spin-2 mediator described by a symmetric Fierz–Pauli field Besides the conventional coupling to the conserved fermion energy–momentum tensor, the paper considers its symmetric axial counterpart, which is nonconserved for massive fermions and contributes to axial-tensor–axial-tensor exchange The leading minimal spin-2 interactions are either P, T even or P odd and T even, specifically not generating a T-odd potential The axial-tensor–axial-tensor channel is P, T even The tensor–tensor spin-2 exchange yields the massive-spin-2 Yukawa force and contains V1, V2 + V3, and V4,5 structures at quadratic order in nonrelativistic momenta The tensor–axial–tensor spin-2 exchange is P odd but T even The axial-tensor–axial-tensor exchange is P, T even and reflects the nonconservation of the axial-tensor current for massive fermions

Mapping to Rotationally Invariant Basis

The derived interactions are mapped onto the sixteen-potential Dobrescu–Mocioiu basis using a Hermitian mapping This mapping allows for the translation of existing experimental constraints into numerical limits on spin-1 and spin-2 coupling products in both small- and large-mediator-mass regimes, as well as representative limits at finite mediator masses The basis contains P-even P-odd T-even V1,V2,V3,V4,V5,V8 and T-odd V6,7 structures The spin-1 gAgTe interaction is generalized to finite mediator mass while the conventional spin-2 g2g2 interaction is rederived and generalized in this framework

Constraints and Limits

The paper provides component-wise translations of existing experimental constraints, showing how limits on individual Vi structures can be converted into limits on the new coupling products Table III details these component-by-component matching relations between the new spin-1 and spin-2 couplings and the RMP conventions Representative limits are obtained by digitizing published exclusion curves using WebPlotDigitizer and translating selected points through the corresponding curve to provide approximate constraints The small-M limits for the spin-1 vector–tensor coupling are obtained by matching the common V3 component of the interactions to tensor–tensor/pseudotensor–pseudotensor constraints for a massless paraphoton The large-M (contact) limit for the spin-2 tensor–tensor interaction is obtained using g1 2g2 2/M squared = 32g1 T g2 T /M squared

Conclusion and Implications

The work concludes by providing a unified starting point for interpreting macroscopic fifth-force measurements, precision spin experiments, and atomic or molecular tests in terms of massive spin-1 and spin-2 mediators The derived results show that the mixed vertices generate operator combinations not present when the vector and dipole sectors are treated separately The results provide a unified starting point for interpreting macroscopic fifth-force measurements, precision spin experiments, and atomic or molecular tests in terms of massive spin-1 and spin-2 mediators The constraints derived are component-wise V4+5 reinterpretations of the standard vector–vector interaction The complete spin-2 axial-tensor–axial-tensor potential also contains V2, and the full model limit should be obtained by recomputing the experimental response to the complete spin-2 potential The results provide a unified starting point for interpreting macroscopic fifth-force measurements, precision spin experiments, and atomic or molecular tests in terms of massive spin-1 and spin-2 mediators The derived results provide a unified starting point for interpreting macroscopic fifth-force measurements, precision spin experiments, and atomic or molecular tests in terms of massive spin-1 and spin-2 mediators

Appendix Details

Appendix A presents the constraints on the spin-1 and spin-2 interaction constants considered in this work by matching components of the potentials derived above to existing experimental constraints Table V gives limits for small and large mediator masses on the spin-1 vector–tensor coupling Table VI gives limits for the spin-1 vector–pseudotensor coupling Table VII gives limits for the spin-1 axial–tensor coupling Table VIII shows constraints on the spin-1 axial–pseudotensor coupling gAgTe obtained by translating the dimensionless Conti–Khriplovich constants Table IX gives limits for the spin-1 tensor–tensor and pseudotensor–pseudotensor couplings Table X shows constraints on the spin-2 tensor–tensor coupling using g1 2g2 2 = 32g1 T g2 T Table XI gives constraints on the mixed tensor–axial-tensor coupling ge1 2g2 2 Table XII gives constraints on the axial-tensor–axial-tensor coupling ge1 2ge1 2g2 2

Representative Limits

Representative limits are obtained by digitizing published exclusion curves using WebPlotDigitizer and translating selected points through the corresponding curve to provide approximate constraints Table XIII shows representative limits on f4+5 and the corresponding translated bounds on the spin-1 vector–tensor coupling Table XIV shows representative laboratory gpgs constraints and translated spin-1 (S = 1) vector–pseudotensor bounds Table XV shows EDM-derived gpgs constraints and the corresponding translated bounds on the spin-1 vector–pseudotensor coupling Table XVI shows representative V11 limits on gAgV and the corresponding translated bounds on the spin-1 axial–tensor coupling Table XVII shows representative TOPE V6+7 limits and the corresponding translated bounds on the spin-1 axial–pseudotensor coupling Table XVIII shows representative gpgp limits and the corresponding translated bounds on the spin-1 tensor–tensor and pseudotensor–pseudotensor couplings

Small-M and Large-M Regimes

Constraints are obtained in two regimes: small mass M where Yukawa propagator approaches the long-range form, and large mass M where the contact limit is assumed For small M, constraints on gigk usually do not depend on M, while for large M they are expressed in terms of gigk/M squared The small-M limits for the spin-1 vector–tensor coupling are obtained by matching the common V3 component of the interactions to tensor–tensor/pseudotensor–pseudotensor constraints for a massless paraphoton The large-M limit for the spin-2 tensor–tensor interaction is obtained using g1 2g2 2/M squared = 32g1 T g2 T /M squared

Fermion Pair Constraints

The paper provides specific limits for various fermion pairs, including e–e, e–N, and n–n Table V lists limits for the spin-1 vector–tensor coupling on various fermion pairs in both small-M and large-M regimes Table VI lists limits for the spin-1 vector–pseudotensor coupling on various fermion pairs in both small-M and large-M regimes Table VII lists limits for the spin-1 axial–tensor coupling on various fermion pairs in both small-M and large-M regimes Table VIII shows constraints on the spin-1 axial–pseudotensor coupling gAgTe obtained by translating the dimensionless Conti–Khriplovich constants Table IX gives limits for the spin-1 tensor–tensor and pseudotensor–pseudotensor couplings Table X shows constraints on the spin-2 tensor–tensor coupling using g1 2g2 2 = 32g1 T g2 T Table XI gives constraints on the mixed tensor–axial-tensor coupling ge1 2g2 2 Table XII gives constraints on the axial-tensor–axial-tensor coupling ge1 2ge1 2g2 2

Spin-2 Reinterpretations

The minimal spin-2 interactions are T even, so P, T-odd constraints have no counterpart in this minimal spin-2 operator basis The remaining shared Vi components can be reinterpreted directly provided one keeps clear that the complete spin-2 interaction generally contains additional structures The V4+5 component of the spin-2 gA gB is related to the standard V4+5 normalization using g2ag2b = f ab 4+5 2m squared aAa The V3 component of the spin-2 ge1 2ge1 2g2 is related to the spin-1 gTegTe potential by ge1 2ge1 2g2V3 = 8M squared m1m2g1 Te g2 Te The common V1 component of the spin-1 axial–tensor and spin-2 tensor–axial-tensor interactions gives a relation g ge1 2ge1 2g2 = 8m 2g1 Ag2 T

Final Summary

The paper derives finite-range two-fermion potentials for a massive spin-1 mediator carrying simultaneously vector/axial-vector and tensor/pseudotensor interactions The mixed vertices generate operator combinations not present when the vector and dipole sectors are treated separately In particular, gAgTe produces V6,7 at tree level, providing a tree-level single-boson mechanism for the TOPE spin–velocity interaction in the standard sixteen-potential basis The results given here include both vertex orderings and the distributional contact terms required for short-range and atomic-scale applications The authors also extended the analysis to a massive spin-2 field, showing that the mixed tensor–axial–tensor interaction is P odd but T even The heavy-mediator limit yields local derivative operators, whereas a genuine massless graviton is restricted by gauge invariance to conserved symmetric sources and gives the usual P, T-even gravitational interaction The mapping onto the sixteen-potential basis allows for direct coefficient reinterpretations of existing limits from published exclusion plots The results provide a unified starting point for interpreting macroscopic fifth-force measurements, precision spin experiments, and atomic or molecular tests in terms of massive spin-1 and spin-2 mediators

Appendix B Details

Appendix B lists the leading nonrelativistic fermion bilinears required for the derivation of the potentials These include u'γu ≃ 2p − iq × σ, and for the contracted tensor current, T i ≡ qαu'σ ai ≃ 2m(q × σ)i

Distributional Fourier Transforms

Appendix C details the basic identities used throughout the paper, including Z cubed d q (2π) cubed e iq·r / (q squared + M 2) = YM(r) The contact term in Eq.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Automated mapping of new interaction limits to existing experimental constraints: The AI system can perform component-wise translations from new coupling products to standard Dobrescu Mocioiu or Fadeev/RMP potentials using Table III, allowing direct conversion of coupling product bounds based on shared Vi components.

  2. Unified interpretation of spin-1 and spin-2 results: The system can identify relations like g21g22 = 32g1T g2T and "ge1/m j ggej V3 = 8M squared m1m2 g1Te ggej, providing a unified starting point for interpreting macroscopic fifth-force measurements.

  3. Mass-dependent limit derivation: The system can derive constraints in both small and large mediator mass regimes by applying the appropriate scaling statements, such as "For M < Q the Yukawa propagator approaches the long-range form," to obtain limits expressed in terms of gigk/M2 or g1Teg2V / M2.

  4. Component-wise constraint extraction: The AI can extract specific constraints for individual Vi structures by matching them to corresponding RMP/Fadeev components, such as using the V9+10 component to constrain |g1Te ggej| in Table VI.

  5. Exclusion plot translation: The system can translate existing exclusion plots from Ref. [4] into limits on new coupling products by utilizing the coefficient dictionary in Table III, ensuring that coupling product bounds are derived from the full potential rather than a single Vi component.

Sources

Related papers