Quantum Simulation of QCD in Axial Gauge

arXiv:2608.16783 · hep-lat, hep-ph, hep-th, nucl-th, quant-ph · Submitted 2026-08-17 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: We're looking at the paper: "Quantum Simulation of QCD in Axial Gauge".

Mira: Here's the gist of the paper. We study quantum simulation of QCD by choosing the axial gauge Aa3 = 0.

Kai: The number of qubits needed for describing all states up to an energy E with an accuracy epsilon on a lattice of volume V at bare coupling g is bounded as 16nAV + 12nfV.

Mira: We find that quantum resources needed for simulating real-time dynamics of lattice QCD scale polynomially with volume, energy, time, accuracy, and bare Hamiltonian parameters.

Kai: Hamiltonian Formulation in Axial Gauge The axial gauge condition Aa3 = 0 is trivially maintained under (Trotterized) time evolution.

Title and authors: Kai: So we're looking at this paper called Quantum Simulation of QCD in Axial Gauge by Xiaojun Yao and his team, and it tackles simulating SU(three) non-Abelian gauge theory with fundamental fermions in three plus one dimensions <ref:2608.16783#pg1,Quantum Simulation of QCD in Axial Gauge>. It uses the lattice Hamiltonian specifically set up in axial gauge to avoid those Gauss’s law constraints.

Mira: Exactly, and what's interesting is that this axial gauge condition becomes trivially maintained even when we use Trotterization for time evolution, which simplifies things a lot for real-time dynamics.

Lev: From an engineering side, that means the constraints on the gauge field degrees of freedom are handled in a way that doesn't add extra overhead during the time evolution steps themselves, which is a key thing when you're building something for real hardware.

Kai: The paper then lays out how they represent these gauge field variables in a way that lets them be mapped onto qubits using local quantum Fourier transforms to get into the canonical conjugate momentum basis.

Mira: And this mapping is efficient, which is crucial because we need to describe all the states up to a certain energy and accuracy, and they provide a concrete bound for the number of qubits needed for that.

Lev: I'm looking at how they define that qubit count as sixteen times n A times V plus twelve times n f times V, where n A is bounded by some expression involving the energy E, volume V, and the accuracy epsilon, which tells us exactly what's needed for a prediction <ref:2608.16783#pg1>.

Kai: And that means the total number of qubits scales polynomially with volume, energy, time, accuracyepsilon and those bare coupling parameters we usually keep in mind when we simulate these theories.

Mira: That polynomial scaling is what I'm most concerned about because it tells us that simulating real-time dynamics requires resources that grow predictably as the problem gets bigger or more demanding.

Lev: And they also break down the gate complexity for time evolution, showing costs for terms like H A times A times H and the fermion kinetic term, which is where you see those big scaling factors.

Title and authors: Kai: The paper shows that the dominant costs come from these gauge interaction terms and the fermion kinetic term because of things like Jordan-Wigner overhead when we map those fermion operators onto qubits.

Mira: And they quantify that overhead by showing a cost of about eight thousand seven hundred sixty times n to the fourth times V to four over three for one specific interaction term, H A times A times HΠΠ, which is quite large.

Lev: For the fermion kinetic term specifically, they estimate the cost at roughly five hundred seventy six times n f times V five over three in terms of CNOT gates and single-qubit rotation gates for a one step of time evolution.

Kai: The fermion encoding part is handled by using the Jordan-Wigner transformation or Bravyi Kitaev encoding to maintain those anticommutation relations between the fermion fields when we map them onto qubits.

Mira: That transformation introduces an overhead, which they quantify by counting the number of Pauli Z matrices in a specific equation, showing how much extra work that mapping adds to the overall circuit.

Lev: So, while they’ve given us these concrete costs for one step of evolution, we have to remember that these are for Trotterized evolution and we need to consider those error bounds from the operator norms as well.

Kai: The paper suggests that because of how they bound the error, it scales polynomially with volume V, n A, n f, and the lattice bare parameters, which is similar to what we see in simpler cases like QED.

Mira: That similarity to QED is interesting because it suggests a certain universality in how these quantum resources scale for non-Abelian theories when you're looking at these kinds of simulations.

Lev: The paper also points out that this setup, the Hamiltonian and the quantum algorithm they developed here, is applicable to SU(Nc) non-Abelian gauge theories in more than one spatial dimension.

Kai: So, the implication is that we can use this framework to bound qubit and gate counts similarly for these more complex theories in higher dimensions.

Mira: They mention that the algorithm itself is just a starting point for simulating the axial gauge Hamiltonian, which means it's a solid foundation but not necessarily a complete simulation package yet.

Title and authors: Lev: And they outline their structure clearly, going through everything from the continuum Hamiltonian to discretization and digitization in page three, then bounding the qubit cost on page four and finally analyzing the quantum circuits for evolution on page five.

Kai: So, to wrap up this paper called Quantum Simulation of QCD in Axial Gauge, it gives us concrete bounds on how many qubits we need and what kind of gates are required to simulate real-time dynamics using this specific gauge choice.

Mira: The main point is that the required quantum resources scale polynomially with the system size and accuracy, which is a useful scaling result for non-equilibrium dynamics in lattice QCD.

Lev: For me, the concrete numbers they give for CNOT and single-qubit rotation gates on page five are what really matter because they tell us what's feasible to run on current or near-future hardware.

Kai: It’s interesting to see how they handle the gauge field degrees of freedom by transforming them into the canonical momentum basis efficiently using those local quantum Fourier transforms.

Mira: And that efficient transformation is key to making sure the qubit cost calculation, that sixteen n A V plus twelve n f V bound, is actually achievable in practice <ref:2608.16783#pg1>.

Lev: If we were to try running this on real hardware, the overhead from implementing those fermion encoding steps via Jordan-Wigner or Bravyi Kitaev would be a significant factor in the total gate count.

Kai: And they've done a good job of quantifying that overhead by showing exactly how many Pauli Z matrices are involved due to the anticommutation relations of those fermion fields.

Mira: Overall, this paper provides a rigorous framework for estimating the quantum resources needed to simulate real-time dynamics of lattice QCD in axial gauge, which is really useful for planning future experiments.

Lev: It's a solid starting point, and their analysis on the truncation value and digitization step size in page four gives us some tangible constraints on how accurate we can be before the resource count explodes.

Lev: For me, the concrete numbers they give for CNOT and single-qubit rotation gates on page five are what really matter because they tell us what's feasible to run on current or near-future hardware.

The paper's summary: Kai: So, to recap, this paper shows how you can simulate quantum chromodynamics using axial gauge conditions on a lattice and it gives us concrete numbers for the resources needed for that simulation.

Mira: Exactly, it’s about taking something complex like QCD and applying these specific gauge choices to make the quantum simulation tractable.

Lev: The core idea they use is setting the axial gauge condition to zero, which simplifies things because you don't have those tricky Gauss’s law constraints messing with your time evolution.

Kai: And because of that, they can express the field degrees of freedom in a way that lets them map onto qubits efficiently using local quantum Fourier transforms into that canonical momentum basis.

Mira: That efficiency is what’s interesting because it means the complexity scales in a very predictable way when you look at the total number of qubits required to describe all those physical states up to a certain energy and accuracy.

Lev: They give you this formula, sixteen n A times V plus twelve n f times V for the total qubit count, where n A is determined by how much you truncate the gauge field value.

Kai: And that means the number of qubits scales polynomially with volume and energy and accuracy, which is a good thing because it suggests the resources grow in a controlled manner.

Mira: But it also means we have to be careful about those bare coupling parameters, which are things we usually keep in mind when we simulate these theories on the lattice.

Lev: And they don't just stop there; they break down the gate complexity for time evolution, showing costs for terms like the gauge interaction and that fermion kinetic term.

Kai: The numbers there are pretty big; for instance, one term scales as n to the fourth times V to four over three in terms of CNOT gates needed.

Mira: And then you have the overhead from encoding those fermions using a transformation like Jordan-Wigner or Bravyi Kitaev, which they quantify by counting those extra Pauli Z matrices.

Lev: That mapping adds a specific overhead, around five hundred seventy six times n f times V over three in terms of CNOT gates for just one step of time evolution.

Kai: So what this really tells us is that simulating real-time dynamics is doable with polynomial quantum resources, as long as we can manage those specific scaling factors they've laid out.

Mira: It’s a solid framework for non-Abelian gauge theories in more than one spatial dimension, which is pretty broad for this kind of setup.

Lev: But keep in mind, this is just the starting point; it’s not a full simulation package yet and their bounds depend heavily on how you choose your truncation and digitization steps for the gauge fields.

Kai: So the next thing we look at is how they rigorously prove those bounds on those truncation values and digitization step sizes to make sure the qubit count stays within those predictions.

The paper's improvements: Kai: So, we’re looking at how the authors suggest ways to make this simulation even better than what they initially presented on page four and five.

Mira: They aren't just stopping there; they’re talking about how you can improve the accuracy of your results by adjusting those truncation and digitization values for the gauge fields.

Lev: That means if you want a more precise picture, you need to figure out exactly what value to set for that gauge field truncation and how fine your digitization step needs to be.

Kai: So, if I understand this right, they are saying that the error in the simulation falls with the square of the sampling interval because of those choices.

Mira: Exactly; you have to balance needing a good accuracy against needing enough computational power to avoid running out of qubits.

Lev: The caveat here is that finding those optimal values for truncation and digitization isn't trivial, and they actually prove bounds on what those values can be before the simulation breaks down.

Kai: That’s a big deal because it gives us a roadmap for how to increase the fidelity without just throwing more qubits at the problem blindly.

Mira: It means you can systematically improve your results by tuning those parameters, moving beyond just running one fixed simulation.

Lev: From an engineering standpoint, knowing those bounds helps us know exactly what kind of hardware we need to even attempt those higher accuracy runs on.

Kai: So the implication is that this isn't just a static calculation; it’s an iterative process where you optimize the simulation setup based on these new constraints.

Mira: It pushes the idea that these quantum simulations can be refined systematically, not just run once and get done.

Lev: And this leads us right into what they propose next: analyzing the actual quantum circuits for time evolution, showing exactly how those gates translate into physical operations on a quantum computer.

Conclusion: Tom: So we’re wrapping up this look at "Quantum Simulation of QCD in Axial Gauge" and what it means for quantum simulation of real-time dynamics in lattice QCD.

Kai: To summarize, the paper gives us a solid framework using axial gauge to define how many qubits you need and what kind of gates you’ll have to run for those simulations.

Mira: It really shows that even with these complex non-Abelian theories, we can establish polynomial scaling laws for the required resources when simulating real-time evolution.

Lev: From my side, it confirms that the overhead from mapping fermion operators using techniques like Jordan-Wigner is a necessary cost we have to account for when planning any real quantum hardware implementation.

Kai: It’s encouraging because it tells us that if we can nail those qubit and gate counts, the simulation isn't just theoretically possible, it's resource-bound in a predictable way.

Mira: And the fact that they provide bounds on truncation and digitization steps gives us a concrete way to move from theory to practical implementation planning.

Lev: That’s crucial because those specific bounds dictate whether we’re looking at a simulation that takes years or one that might be feasible on near-term systems.

Kai: So, the big picture here is that the complexity of simulating these theories scales predictably with volume and energy, which is something we can actually work with.

Mira: It sets a clear path forward for using quantum resources to tackle non-equilibrium problems in lattice QCD.

Lev: We’ll need to keep checking those gate counts against the actual fidelity of the qubits we manage to cool and measure on our systems.

Kai: Right, so next week, we’re going to take those theoretical bounds and look at how they translate into actual quantum circuits for time evolution.

University of Washington

hep-lat, hep-ph, hep-th, nucl-th, quant-ph

Submitted: 2026-08-17

Updated: 2026-11-11

Comments: 33 pages; v2: accepted version

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 91/100

The gist: We study quantum simulation of QCD by choosing the axial gauge Aa3 = 0.

Key concepts

Axial Gauge ($ ext{A}_3=0$)
This is a specific mathematical condition imposed on the gauge fields in QCD. It simplifies the Hamiltonian formulation, allowing gauge field degrees of freedom to be efficiently represented and transformed using local quantum Fourier transforms. This simplification is crucial for developing an efficient quantum simulation strategy.
Qubit Cost Scaling
The total number of qubits needed to describe all states up to a certain energy ($E$) and accuracy ($\epsilon$) on a lattice of volume ($V$) scales as $16nAV + 12nfV$. This formula shows that the resource requirements grow polynomially with the system size, energy, and other physical parameters, indicating polynomial quantum resources are sufficient.
Trotterized Time Evolution
This is a method used to simulate time evolution governed by a complex Hamiltonian by breaking it down into simpler steps. The paper analyzes the gate complexity for this process, showing that the dominant costs come from gauge interactions and fermion kinetic terms, which scale polynomially with $V$, energy, and time.

Terminology

Summary

We study quantum simulation of QCD by choosing the axial gauge Aa3 = 0. p. 3 The number of qubits needed for describing all states up to an energy E with an accuracy epsilon on a lattice of volume V at bare coupling g is bounded as 16nAV + 12nfV. p. 0 We find that quantum resources needed for simulating real-time dynamics of lattice QCD scale polynomially with volume, energy, time, accuracy, and bare Hamiltonian parameters. p. 0

Hamiltonian Formulation in Axial Gauge

The axial gauge condition Aa3 = 0 is trivially maintained under (Trotterized) time evolution. The gauge field degrees of freedom are expressed in the local field basis and can be efficiently transformed into the canonical conjugate momentum basis by local quantum Fourier transforms. p. 0 The Hamiltonian density in terms of the independent variables can be written as H = Xa,i=1,2 1/2 Πa i Πa i + 1/2 (∂3A a i) (∂3A a i) − gAa i Jia + 1/2 Xa F a 12F a 12 + 1/2 Xa (∂3A a0) (∂3A a0) − Xf Xj=1,2,3 ψ¯f (iγj ∂j − mf)ψf. p. 4 The independent gauge field variables obey the standard commutation relations [A a i(x), Ab j(y)] = 0. p. 5

Qubit Cost Analysis

The complete field basis can be written as n O x,a,i,f,j,α A a i(x)⟩ ⊗ n j fα(x)⟩ o. If the gauge field value is truncated to the interval [-Amax, Amax], the truncated wavefunction becomes Ψcut⟩. p. 9 The total number of qubits needed is 16nAV + 12nfV. p. 0 The number of qubits needed at one site for one color and one spatial index is nA = ceil(log2(2Amax/δA + 1)). p. 8

Gate Complexity of Time Evolution

The gate costs for Trotterized Hamiltonian evolution are summarized in Table 1. The dominant costs originate from the gauge interaction term HAΠAΠ and the fermion kinetic term due to the Jordan-Wigner overhead, which scale as O(n 4AV4/3) and O(V5/3), respectively, for fixed nf ≤ 6. p. 0 For instance, HAΠAΠ requires 8736n 4AV (L − 1) CNOT and 1456n 4AV (L − 1) single-qubit rotation gates. p. 0

Fermion Encoding Overhead

To maintain the anticommutation relation of the fermion fields as in Eq (2.10) when mapping them into qubits, one has to apply the Jordan-Wigner transformation or use the more efficient Bravyi-Kitaev encoding. p. 0 The number of Pauli Z matrices in Eq. p. 0 (5.13) is the implementation overhead due to the anticommutation relation of fermion fields. p. 5 The dominant cost to implement one-step time evolution of the fermion kinetic term is roughly 576nfV5/3 CNOT and 24nfV5/3 singlet-qubit rotation gates. p. 0

Conclusion on Resource Scaling

The Trotter error can be bounded by operator norms, which scale polynomially with V, nA, nf, and lattice bare parameters, similar to the QED case. Simulating time evolution up to a given time only requires polynomial quantum resources. p. 2 The Hamiltonian setup and the quantum algorithm studied here are generally applicable for SU(Nc) non-Abelian gauge theories in more than one spatial dimensions. p. 2 Qubit and gate counts can be bounded similarly as proved here. p. 0 The algorithm developed here is just a starting point for simulating the axial gauge Hamiltonian. p. 3 The paper is organized as follows: In Sec. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 Then in Sec. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 Finally, we will conclude in Sec. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 6 and discuss future prospects. p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 p. 3 The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects. The paper is organized as follows: In Sec. 2, a brief review of the axial gauge QCD Hamiltonian in the continuum will be given, followed by a discussion of a Green’s function contained in the Hamiltonian. Then in Sec. 3, we will introduce a discretized lattice Hamiltonian containing a well-defined Green’s function regulated on the lattice. We will also discuss truncation and digitization in the gauge field basis and how to map gauge and fermion fields onto qubits. Bounds on the truncation value and digitization step size for gauge fields will be proved in Sec. 4 for describing all states up to an energy and accuracy, which together give a bound on the number of qubits needed. Sec. 5 will analyze quantum circuits for implementing Trotterized time evolution and provide bounds on the number of CNOT and single-qubit rotation gates. Finally, we will conclude in Sec. 6 and discuss future prospects <ref:2608. p. 3

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Accurate Resource Estimation for Real-Time Dynamics: The improved system can precisely bound CNOT and single-qubit rotation gate counts for simulating real-time dynamics of lattice QCD by using the derived polynomial scaling formulas, such as those in Table 1, which show how these costs depend on volume, energy, time, accuracy, and bare coupling.

  2. Efficient Gauge Field Representation: The system can handle gauge field degrees of freedom by mapping them onto qubits using local quantum Fourier transforms to transform the local field basis into the canonical conjugate momentum basis efficiently.

  3. Qubit Cost Prediction: It can predict the total number of qubits required to describe all physical states up to a given energy and accuracy, using the formula 16nAV + 12nfV, where nA is bounded by Eq. (4.30).

  4. Quantum Algorithm Construction: The system can explicitly construct quantum circuits for Trotterized time evolution based on arbitrary gauge field truncation and digitization, as shown in Section 5 of the paper.

  5. Fermion State Encoding: It can implement fermion statistics using the Jordan-Wigner transformation, providing a specific map from fermion operators to Pauli strings that quantifies the implementation overhead due to anticommutation relations.

Sources

Related papers