Model analysis on the effectiveness of the HAL QCD method for hadron-hadron interactions
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.
Kai: We're looking at the paper: "Model analysis on the effectiveness of the HAL QCD method for hadron-hadron interactions".
Mira: Here's the gist of the paper. The HAL QCD method is examined to derive a formula to calculate quantities like R-correlators and local potentials from hadron-hadron scattering amplitudes in effective models, allowing for a judgment on whether the HAL QCD local potential reproduces original interaction properties Derivation of HAL QCD Quantities The study derives a formula to calculate quantities in the HAL QCD method, such as R-correlators and HAL QCD local potentials, from hadron-hadron scattering amplitudes within effective models This formula allows one to calculate the R-correlators and HAL QCD local potentials with their own scattering amplitude, serving as a basis for how interaction properties are reflected in the HAL QCD local potential The derivation is performed in continuum spacetime first, followed by an extension to lattice spacetime Model Formulation of Scattering Amplitudes The effective model constructs the meson-baryon scattering amplitudes, including elastic scattering and transitions from a bare state to the meson-baryon two-body state The interaction is modeled using a Gaussian local potential for elastic scattering, defined by Vint(VL, bL; p, p′) A one-to-two-body transition is introduced via a Gaussian form with range b0 for the Λ0-MB coupling The scattering amplitude in continuum spacetime is formulated using the Lippmann–Schwinger equation involving interaction terms V(2)(p, p′) and V(1)(p) Evaluation of Potential Effectiveness The HAL QCD potential is calculated using the derived R-correlator formula In elastic scattering, when the original interaction is predominantly local, the HAL QCD local potentials quantitatively reproduce phase shifts and correctly indicate the existence/absence of a bound state with binding energy ∼ MeV The results show that HAL QCD potentials exactly coincide with original input potentials when neglecting the second derivative term in the nonrelativistic formulation Analysis of Transition and Singularities The study extends the analysis to bare to meson-baryon transitions, where a bound state of mass MB = 1923.4 MeV is considered For the KN¯ interaction, which showed singular behavior in recent HAL QCD results, the authors investigate whether such singular behavior can be reproduced in their model; they find that a node in the R-correlator induces a singular HAL QCD potential The analysis confirms that while a node can generate a singular local potential, dominant bound-state contributions often lead to non-singular potentials, suggesting that coupled channels and internal structure are essential for capturing complex dynamics Lattice Discretization Effects When moving to lattice spacetime, the momentum integrals become summations over discrete momenta The A+1 projection is used for s-wave projection in lattice space, leading to a modified spherical Bessel function ˜j0(pα, r) The resulting HAL QCD potentials V˜HAL(r) show that discretization effects are small and notable only near the origin The HAL QCD method is shown to be quantitatively effective when meson-baryon scattering is elastic and the interaction is predominantly local, as represented by a Gaussian interaction term The study concludes that HAL QCD potentials extracted from lattice QCD simulations yield physical predictions quantitatively consistent with actual scattering observables when the interaction is predominantly local However, it cannot uniquely determine the internal structure of a bound state The HAL QCD method is a powerful tool to evaluate hadron-hadron interactions directly from lattice QCD simulations By using the derived formula, researchers can examine whether the original meson-baryon interaction is correctly encoded into the HAL QCD potential within an effective model In elastic scattering, phase shifts were reproduced quantitatively when the interaction was local Lattice discretization modified results only slightly The method can produce a bound state equivalent to that generated by the original interaction, but it cannot uniquely determine the internal structure of a bound state For singular interactions like KN¯, a node in the R-correlator induces singular behavior in the HAL QCD potential Coupled channels and internal structure are essential for enhancing scattering-state contributions to resolve such singularities The formula allows independent testing of derivative expansion for nonlocal potentials In conclusion, HAL QCD potentials extracted from lattice QCD simulations yield physical predictions quantitatively consistent with actual scattering observables when the interaction is predominantly local Acknowledgments The authors acknowledge Kotaro Murakami for fruitful discussions regarding the HAL QCD KN¯ potential derived from lattice QCD simulations The authors also thank Sinya Aoki, Takumi Doi, and Noriyoshi Ishii for helpful discussions regarding the general properties of the HAL QCD method Sinya Aoki, Takumi Doi, and Kotaro Murakami are acknowledged for their careful reading of the present manuscript as well This work was supported in part by a Grant-in-Aid for Scientific Research from JSPS (25H00655) Appendix A: Emergence of the physical states The appendix proves the equivalence between Eqs.
Kai: (21) and (23), and between Eqs.
Mira: (32) and (33) The proof focuses on the scattering-state contribution, showing that Eq.
Kai: (21) is equivalent to Eq.
Paper summary: Kai: So, this paper on the "Model analysis on the effectiveness of the HAL QCD method for hadron-hadron interactions" is showing us that this method is a powerful tool we can use to evaluate hadron-hadron interactions directly from lattice QCD simulations.
Mira: By using their derived formula, researchers can test whether the original meson-baryon interaction is correctly encoded into the HAL QCD potential within an effective model.
Lev: In elastic scattering, phase shifts were reproduced quantitatively when the interaction was local, and lattice discretization modified results only slightly. This suggests it's a reliable tool for checking local approximations in these systems.
Kai: But the paper also makes it clear that for singular interactions like KN bar, you need to look at things like coupled channels and internal structure if you want to resolve those singularities properly.
Mira: The conclusion is that HAL QCD potentials extracted from lattice QCD simulations yield physical predictions quantitatively consistent with actual scattering observables when the interaction is predominantly local.
Lev: It’s a good test for how well we can map simulation data onto effective models, but we need to remember that it stops where the internal structure of a bound state itself becomes important.
Conclusion: Kai: So we're wrapping up this deep dive into the "Model analysis on the effectiveness of the HAL QCD method for hadron-hadron interactions."
Mira: Yeah, basically, this paper is taking those lattice QCD simulations and testing if we can actually use them to predict what happens when these particles bump into each other in a real interaction.
Lev: It’s checking if the tools we build from the simulations—like their HAL QCD potentials—actually match what we expect from the original physics, whether it's elastic scattering or something more complex.
Kai: They show that when the interaction is pretty simple, like a local one described by a Gaussian term, these HAL QCD potentials do a really good job reproducing the phase shifts we measure.
Mira: But they also found that this method isn't perfect; it tells you whether there's a bound state with binding energy around one MeV, but it doesn't tell you the full internal structure of that state.
Lev: That’s a big thing for hardware, because if we need to run these on real machines, we have to deal with that structure complexity in our error correction codes.
Kai: And when they looked at harder cases, like the KN bar interaction, they found a way to get those singular behaviors if you introduce a node in the correlator.
Mira: So the authors are essentially saying this formula lets us test how much of the interaction is local versus how much needs that complicated structure.
Lev: It’s an independent way to check derivative expansion for nonlocal potentials, which is helpful when we try to build models for things like nuclear forces or strong interactions.
Kai: So yeah, the main point here is that HAL QCD potentials from lattice QCD give us quantitative predictions when the input interaction is local.
Mira: It’s a powerful way to see what's encoded in the simulation results, but it has limits when you're dealing with really intricate dynamics.
Lev: And that leads us right into how we can use this formula to test different theoretical models for the next step in our experiments.
Graduate School of Life and Environmental Sciences, Kyoto Prefectural University
hep-ph, hep-lat, nucl-th
Submitted: 2026-08-02
Updated: 2026-11-05
Comments: 25 pages, 19 figures. Version accepted for publication in Physical Review D. Added discussions on the derivative expansion of nonlocal potentials and interactions with various ranges on the lattice
License: http://creativecommons.org/licenses/by-nc-sa/4.0/
Importance score: 76/100
The gist: The HAL QCD method is examined for its effectiveness by deriving a formula to calculate quantities like R-correlators and local potentials from hadron-hadron scattering amplitudes…
Key concepts
- HAL QCD Method
- This is a technique used to derive quantities like R-correlators and local potentials directly from hadron-hadron scattering amplitudes obtained from lattice QCD simulations. It acts as a tool to check if an effective model's potential correctly reflects the true underlying interaction.
- R-correlator
- This is a quantity calculated using the derived formula that helps judge how interaction properties are reflected in the HAL QCD local potential. Analyzing its behavior, especially nodes, reveals information about the nature of the underlying interaction, such as whether it is singular or non-singular.
- Local Potential Reproduction
- The study checks if HAL QCD potentials can quantitatively reproduce original input potentials. It found that when interactions are predominantly local (like a Gaussian potential), the HAL QCD potentials match the original ones very well, confirming its effectiveness in this regime.
- Singular Behavior (KN¯)
- When analyzing interactions like KN¯, which showed singular behavior in earlier results, the authors found that a node in the R-correlator can induce a singular HAL QCD potential. To capture complex dynamics and avoid these singularities, coupled channels and internal structure are necessary.
Terminology
Summary
The HAL QCD method is examined for its effectiveness by deriving a formula to calculate quantities like R-correlators and local potentials from hadron-hadron scattering amplitudes, which allows judgment on whether the extracted potential reproduces original interaction properties. p. 0 In this paper, we aim at examining the effectiveness of the HAL QCD method by
deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and
HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input.Where the paper says it
Derivation of HAL QCD Quantities
The study derives a formula to calculate quantities in the HAL QCD method, such as R-correlators and HAL QCD local potentials, from hadron-hadron scattering amplitudes within effective models. This formula allows one to calculate these quantities with their own scattering amplitude, serving as a basis to judge how interaction properties are reflected in the HAL QCD local potential. p. 0 In the following, we derive a formula to
calculate quantities in the HAL QCD method, such as the
so-called R-correlators and HAL QCD local potentials, from
hadron-hadron scattering amplitudes. With this formula, one
can calculate the R-correlators and HAL QCD local potentials with their own scattering amplitude, which will serve
as a good basis for how the properties of the hadron-hadron
interaction in their model are reflected in the HAL QCD local potential. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input. In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV.Where the paper says it
Where the paper says it
Analysis in Elastic Scattering
The analysis focuses on s-wave meson (M) -baryon (B) scattering, considering both elastic scattering and transitions from a bare state to the meson-baryon two-body state. In the nonrelativistic formulation, the HAL QCD potentials exactly coincide with original input potentials when using single interaction terms for sets I, II, and III. p. 0 In this paper, we aim at examining the effectiveness of the HAL QCD method by
deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and
HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input.Where the paper says it
Semirelativistic Formulation and Consistency
The semirelativistic formulation shows that while binding energies differ slightly between methods, the HAL QCD potentials quantitatively capture the existence or absence of bound states correctly. The phase shifts obtained from the HAL QCD potentials reproduce those calculated directly from the original scattering amplitude fairly well. p. 0 In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input. In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV.Where the paper says it
Lattice Discretization Effects
In lattice spacetime, spatial discretization and finite volume affect both differentials and integrals, but these effects on R-correlators remain below roughly 10 percent. HAL QCD potentials evaluated in finite-volume lattice spacetime with periodic boundary conditions reproduce physical quantities quantitatively consistent with actual scattering observables when the interaction is predominantly local. p. 0 In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV. Lattice discretization of
spacetime modifies the results only slightly.Where the paper says it
Bare to Meson-Baryon Transition Analysis
The application to the bare (Λ0) to meson-baryon transition case confirms that the HAL QCD potential can produce a bound state equivalent to that generated by the original interaction. The study also investigates the singular behavior of the KN¯ potential, confirming that a node in the R-correlator indeed induces singular behavior in the HAL QCD potential. p. 0 Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering.Where the paper says it
Conclusion and Outlook
The HAL QCD method is a powerful tool to evaluate hadron-hadron interactions directly from lattice QCD simulations. p. 0 Model analysis on the effectiveness of the HAL QCD method for hadron-hadron interactions
Takayasu Sekihara∗
and Kei Fujiwara
Graduate School of Life and Environmental Sciences, Kyoto Prefectural University, Sakyo-ku, Kyoto 606-8522, Japan
(Dated: August 4, 2026)
The HAL QCD method has been one of the powerful tools to extract hadron-hadron interactions directly from
lattice QCD simulation data. In this paper, we aim at examining the effectiveness of the HAL QCD method by
deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and
HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input. In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV. 10
where λ(x, y, z) ≡ x
2 + y
2 + z
2 − 2xy − 2yz − 2zx is the
Kallen function, to the array ¨ pn, and append
Gon(W) = −i
pon(W)mMmB
2πW
, (68)
which originates from the +i0 prescription in the propagator,
to the array Gn(W) (65) as well. Compositeness
From the scattering amplitude, we can extract the so-called
compositeness [46–48] (see also a recent review [49]), which
quantifies the fraction of the hadronic molecular component
inside a bound state, as was done in the 1960s to investigate
the internal structure of the deuteron [50]. [41], they discussed the asymptotic behavior
of the so-called Nambu–Bethe–Salpeter wave function, especially focusing on the theoretical treatment of bound states. [42–44], they mainly discussed the effectiveness of
the derivative expansion in the HAL QCD method. [41], they discussed the asymptotic behavior
of the so-called Nambu–Bethe–Salpeter wave function, especially focusing on the theoretical treatment of bound states. [42–44], they mainly discussed the effectiveness of
the derivative expansion in the HAL QCD method. In this paper, we aim at examining the effectiveness of the HAL QCD method by
deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and
HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Model Analysis: Bare to Meson-Baryon Transition
The model analysis in the bare to meson-baryon transition case shows that the HAL QCD potential can accurately reconstruct the meson-baryon potential when the bound state is dominated by a molecular character. The HAL QCD potential for parameter set VII clearly exhibits a repulsive core plus attractive pocket structure, consistent with the original meson-baryon interaction modeled by double Gaussians. p. 7 In addition, we may consider a two-term interaction
V(2)(p, p′
) = Vint(VL, bL; p, p′
) − Vint(2VL, bL/2; p, p′
),
(55)
with VL < 0. This means that the interaction has a repulsive
core in the inner region and an attractive pocket in the outer
region.Where the paper says it
Can we explain the singular HAL QCD results of KN¯? p. 0 Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering.Where the paper says it
The singular behavior in the HAL QCD potential for the KN¯ interaction is shown to originate from a node in the R-correlator, and this singularity can be regularized by discarding it when fitting model parameters. p. 0 Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering. INTRODUCTION
Hadron-hadron interaction has been one of the most important topics in hadron physics, because it contains information on the quark dynamics inside hadrons, which can
serve as a hint to understanding the fundamental theory of
strong interaction, quantum chromodynamics (QCD). CORRELATION FUNCTIONS AND HAL QCD
METHOD
First, we explain what quantities are evaluated in the HAL
QCD method. For simplicity, throughout this study we focus
on s-wave meson (M) -baryon (B) scattering in the centerof-mass frame and introduce the interaction between them,
while we neglect couplings to other meson-baryon channels.Where the paper says it
Where the paper says it
Summary and Outlook
By using this formula, one can independently apply it to examine how the R-correlator and HAL QCD potential reflect the properties of the scattering amplitude in various models. The HAL QCD method is a powerful tool to evaluate hadron-hadron interactions directly from lattice QCD simulations. The study confirms that HAL QCD potentials extracted from lattice QCD simulations yield physical predictions quantitatively consistent with actual scattering observables when the interaction is predominantly local. p. 0 In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV. Lattice discretization of
spacetime modifies the results only slightly.Where the paper says it
Acknowledgments
The authors acknowledge Kotaro Murakami for fruitful discussions regarding the HAL QCD KN¯ potential derived from lattice QCD simulations. The authors also thank Sinya Aoki, Takumi Doi, and Noriyoshi Ishii for helpful discussions regarding the general properties of the HAL QCD method. p. 1 In this case, the HAL QCD method
measures the three-point correlation in Fig. The extension
to general hadron-hadron scatterings is straightforward. Here, we divide the
contour into three parts: C1, C2, and C3. The first part C1 is
the straight line infinitesimally above the real W axis in the
range (−∞,∞), i.Where the paper says it
Where the paper says it
Appendix A: Emergence of the physical states
The appendix proves the equivalence between Eqs. (21) and (23), and between Eqs. (32) and (33), focusing on the scattering-state contribution. p. 1 (3)
Because the unconnected contribution becomes the product
of the meson and baryon propagators, we can easily evaluate
it as
C(t, r)unc
=
Z
d
3xM
Z
d
4pM
(2π)
4
mM
EM(pM)
ie−ipM·(x
′
M−xM)
p
0
M − EM(pM) + i0
×
Z
d
3xB
Z
d
4pB
(2π)
4
mB
EB(pB)
ie−ipB·(x
′
B−xB)
p
0
B − EB(pB) + i0
Λ0(x0)
B(x
′
B)
M(x
′
M)
FIG. Diagram for the correlation function of the bare state (Λ0) to
the meson (M) -baryon (B) scattering state. The second part C2 is the back-and-forth line on the real W axis at
Mth ≤ W < ∞. Finally, the third part C3 is the lower-half
circle in the physical Riemann sheet of the complex W plane. The second part C2 is the back-and-forth line on the real W axis at
Mth ≤ W < ∞. Finally, the third part C3 is the lower-half
circle in the physical Riemann sheet of the complex W plane. The second part C2 is the back-and-forth line on the real W axis at
Mth ≤ W < ∞. Finally, the third part C3 is the lower-half
circle in the physical Riemann sheet of the complex W plane.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Appendix B: A+1 projection
The A+1 projection simplifies the Lippmann–Schwinger equation in lattice space, leading to the relation T˜α,α′ = V˜α,α′ + Xα'' V˜α,α''G˜α''T˜ α', α (B8). This projection is used to derive the HAL QCD potential in lattice spacetime. p. 0 Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering.Where the paper says it
Appendix C: Can we explain the singular HAL QCD results of KN¯? p. 0 Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering. Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering.Where the paper says it
Where the paper says it
The singular structure near r ≈ 1. p. 0 Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering. Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering. Because the factor ⟨r|ΨWn
⟩, which
corresponds to the Nambu–Bethe–Salpeter wave function, is
indeed a wave function as a solution of a wave equation, the
HAL QCD potential (22) is expected to reproduce the phase
shift of meson-baryon scattering at large r. Transition from bare state to meson-baryon scattering state
Next, we develop the formula for the R-correlator in the
case of the transition from a bare state, which we denote as
Λ0, to the meson-baryon scattering state. Because the factor ⟨r|ΨWn
⟩, which
corresponds to the Nambu–Bethe–Salpeter wave function, is
indeed a wave function as a solution of a wave equation, the
HAL QCD potential (22) is expected to reproduce the phase
shift of meson-baryon scattering at large r. Transition from bare state to meson-baryon scattering state
Next, we develop the formula for the R-correlator in the
case of the transition from a bare state, which we denote as
Λ0, to the meson-baryon scattering state. CORRELATION FUNCTIONS AND HAL QCD
METHOD
First, we explain what quantities are evaluated in the HAL
QCD method. For simplicity, throughout this study we focus
on s-wave meson (M) -baryon (B) scattering in the centerof-mass frame and introduce the interaction between them,
while we neglect couplings to other meson-baryon channels. CORRELATION FUNCTIONS AND HAL QCD
METHOD
First, we explain what quantities are evaluated in the HAL
QCD method. For simplicity, throughout this study we focus
on s-wave meson (M) -baryon (B) scattering in the centerof-mass frame and introduce the interaction between them,
while we neglect couplings to other meson-baryon channels. Furthermore, the HAL QCD KN¯ potential in Refs. [39, 40], which
was evaluated from the three-point correlation function of the
negative-parity Λ baryon source operator and meson-baryon
sink operators, shows singular behavior around the origin.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The equivalence between Eqs. (32) and (33), except for the bound-state contribution, is proven by showing that Eq. p. 3 We will see in Sec. III C that this ΨB(r) is, except for a
constant factor, the bound-state wave function in coordinate
space. We will see in Sec. III C that this ΨB(r) is, except for a
constant factor, the bound-state wave function in coordinate
space. Lattice discretization of
spacetime modifies the results only slightly. Furthermore, we consider the KN¯ potential in a bare to KN¯
transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the
lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through
our model analysis of the KN¯ scattering.Where the paper says it
Where the paper says it
Where the paper says it
The A+1-projected scattering amplitude and interaction are given by T˜α,α′ = V˜α,α′ + Xα'' V˜α,α''G˜α''T˜ α', α (B8). This is derived using the A+1 projection formalism for lattice space. p. 1 Then, in Sec. IV, we
focus on meson-baryon elastic scattering and numerically examine whether or not the HAL QCD method can reproduce
the original meson-baryon interactions by using the formula
derived in Sec.Where the paper says it
The singular structure near r ≈ 1.6 fm in the lattice HAL QCD potential for parameter set VIII indeed originates from a node in the R-correlator. The singularity is regularized by discarding it when fitting model parameters. p. 7 The subscript (1) indicates that this is a
one- to two-body transition. In these interaction terms, we treat VL, bL, f0, and b0
as model parameters.Where the paper says it
VI. Summary and Outlook
The HAL QCD method is a powerful tool to evaluate hadron-hadron interactions directly from lattice QCD simulations. The study confirms that the HAL QCD potentials yield physical predictions quantitatively consistent with actual scattering observables when the interaction is predominantly local. p. 0 In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input. In an analysis within
a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the
HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly
indicate the existence/absence of the bound state with its binding energy ∼ MeV. In this paper, we aim at examining the effectiveness of the HAL QCD method by
deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and
HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this
framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces
the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of
the Lippmann–Schwinger equation with the original hadron-hadron interaction as an input.Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can calculate R-correlators and HAL QCD potentials directly from meson-baryon scattering amplitudes in any effective model, providing a global framework for judging method applicability.
-
The system can predict whether a HAL QCD local potential reproduces original hadron-hadron interaction properties by comparing the calculated scattering amplitude solution to the input interaction.
-
Improved AI can analyze the effect of lattice discretization on results, specifically noting that
lattice discretization of spacetime modifies the results only slightly
for elastic scattering when interactions are predominantly local. -
The system can distinguish between different physical scenarios, such as determining whether a HAL QCD potential qualitatively captures the existence or absence of a bound state with its binding energy around MeV.
-
Improved AI can assess the consistency between HAL QCD potentials and experimental data, such as phase shifts from relativistic ion collisions via femtoscopy, indicating when
the HAL QCD method is indeed reliable enough to evaluate hadronhadron potentials.
-
The system can identify potential issues in HAL QCD results, such as the
singular behavior around the origin
of the KN bar potential or how anode in the R-correlator induces singular behavior in the HAL QCD potential.
-
The AI can perform model analysis by comparing calculated results from different parameter sets, showing that for elastic scattering with a predominantly local interaction,
the HAL QCD potentials exactly coincide with the original input potentials.
-
The system can quantify the compositeness of a bound state using formula (74), allowing it to determine if
the HAL QCD method alone cannot uniquely determine the internal structure of a bound state.
-
The AI can predict that for bare to meson-baryon transitions, the HAL QCD potential
could produce a bound state equivalent to that generated by the original interaction
based on model parameters. -
The system can analyze how lattice discretization affects potentials, noting that
discretization effects on the HAL QCD potentials are small and notable only near the origin.
Abstract
The HAL QCD method has been one of the powerful tools to extract hadron-hadron interactions directly from lattice QCD simulation data. In this paper, we aim at examining the effectiveness of the HAL QCD method by deriving a formula to calculate quantities in the HAL QCD method, such as the so-called R-correlators and HAL QCD local potentials, from the hadron-hadron scattering amplitudes within effective models. In this framework, we can judge whether the HAL QCD local potential, evaluated in the present formula, reproduces the properties of the original hadron-hadron interaction or not via the scattering amplitude, which is a solution of the Lippmann--Schwinger equation with the original hadron-hadron interaction as an input. In an analysis within a simple model of elastic scattering, we show that, when the original interaction is predominantly local, the HAL QCD local potentials quantitatively reproduce phase shifts of the hadron-hadron scatterings and correctly indicate the existence/absence of the bound state with its binding energy about MeV. Higher-order corrections in the derivative expansion of the HAL QCD nonlocal potentials can provide a better description of the binding energies of the bound states. The lattice discretization and finite-volume effects of spacetime modify the results only slightly, as long as their scale is not comparable to the interaction range. Furthermore, we consider the K bar N potential in a bare to K bar N transition amplitude, which shows singular behavior around the origin in the recent HAL QCD results of the lattice QCD simulation data, and discuss the cause of such singular behavior in the HAL QCD method through our model analysis of the K bar N scattering.
Sources
Related papers
- MadNIS at NLO
- The NANOGrav 15-year data set: A Limit on Continuous Spin Gravitons
- DIS-secting the universe with high-energy neutrinos
- Crowdsourcing Gravitational Waves from Superradiant Axions
- Classification of g-modes for neutron stars with a strong transition: Novel universal relation including slow stable hybrid stars
- Scalar axion field of toroidal electromagnetic pulses