State space modeling of RLC ladder circuits
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.
Tom: We're looking at the paper: "State space modeling of RLC ladder circuits".
Jane: Here's the gist of the paper. State space modeling of RLC ladder circuits derives linear time-invariant state space models for three simple ladder types and discusses their specific matrix structures The paper applies standard nodal analysis on three types of RL C ladders to build systems of ordinary differential equation Circuit Modeling The modeling begins with a single circuit of a ladder and demonstrates how to scale this approach for a specific RLC ladder The modeling approach considers nominal electronic components, where a resistor has only pure resistance without inductance or capacitance, and assumes an arbitrary signal voltage source The voltages, currents and the quantities of the electrical components are noted in Table 1.
Tom: The state space formulation is defined by linear operator mappings F for the main branch and shunt as Fs for the shunt Derivation of Differential Equations The derivation involves applying Kirchhoff’s laws to obtain systems of ordinary differential equations (ODE) for each ladder type For Ladder Type 1, the voltage in the main branch is expressed as vn(t) = rnim,n(t) + ln∂tim,n(t), which leads to a second-order differential equation for the shunt voltage For Ladder Type 2 and Type 3, the resulting equations are derived by differentiating the voltage expressions and applying Kirchhoff's voltage law Second-Order System Formulation The ODEs are arranged into a second-order system M z¨(t) + D z˙(t) + S z(t) = G µ(t) The resulting second-order systems yield two types of matrices: upper triangular shapes and lower finite difference stencils These matrix shapes correspond to spatially discrete integration and a differentiation, respectively First-Order System Transformation The second-order system is reformulated into a first-order system in the common state space formulation x˙(t) = A x(t) + B µ(t) The states are introduced as x1(t) = z(t), x2(t) = ∂tz(t), and the output signal is defined as y(t):= zN(t) The system matrix A, vector B, and output matrix C are determined based on the specific ladder type Simulation Examples and Dynamics Simulations demonstrate the dynamical behavior of the three ladder types with step and sweep input signals The results show charging and discharging dynamics for Type 1, while oscillations are observed for Type 2 and Type 3 Specific behaviors are noted, such as a long and intensive oscillation for ladder type 2 in the last shunt The paper concludes that each ladder type exposes its own specific dynamical behavior which requires particular analysis The article describes a state space modeling for three types of electrical ladders by formulating the system matrix A and its sub-matrices AI and AII The authors present two simulations for their ladder models with step and oscillation input signals to emphasize the dynamical behavior of each ladder type Open points include in-depth analysis of eigenvalue and eigenvector analysis, control system methods like controllability, observability, system identification, and feed-forward and feedback control design The story of circuit configurations is not complete yet with three ladder types because parallel connections in the main branch were skipped The simulations are implemented with Julia programming using the Ellasy.jl package and the DifferentialEquations.jl library The source code is stored in EllasyExamples.
Title and authors: Tom: So what’s the big deal with these specific matrix structures they found? I mean, if we can define the structure, then we can actually build a model.
Jane: Exactly. It means instead of just guessing how to solve it, you get a specific shape for those matrices—upper triangular shapes or lower finite difference stencils depending on which ladder type you are looking at.
Lu: That’s because those matrix shapes directly correspond to the way you discretize time and space in the system, which is a huge step toward making numerical solvers work efficiently.
Meng: But how does that actually translate when we try to run this on real hardware? If we have a lower finite difference stencil, what does that imply about the memory usage for simulating a long chain?
Lalam: It implies a specific pattern of how the states are related across time steps, which is crucial because it tells us exactly what kind of differentiation and integration you're doing when you step through the simulation.
The paper's summary: Tom: So, putting it all together, what’s the core takeaway from this "State space modeling of RLC ladder circuits" paper? What did they actually manage to derive?
Jane: They took standard nodal analysis and applied it to these three types of RL C ladders to build systems of ordinary differential equations. The main point is that they've successfully translated a physical circuit into a set of solvable math equations.
Lu: They show how the voltage in the main branch for Type one, for example, turns into a second order differential equation for the shunt voltage. For Type two and three, they derive those from differentiating the voltage expressions and applying Kirchhoff’s voltage law.
Meng: So it's showing that you don't need some super complex new analysis tool; standard techniques applied systematically can yield these specific mathematical forms for different circuit types.
Lalam: They also reformulate that second order system into a first order system, like x dot equals A x plus B mu, where the states are defined as the voltage and its derivative, and the output is just the voltage at the very end of the ladder.
The paper's improvements: Tom: Okay, so that transformation into a first order system—x dot equals A x plus B mu—that’s pretty practical for implementing in code. What does that actually improve?
Jane: It allows for a clean state space formulation where you have the states x one and x two, which are just the voltage and its derivative, making it much easier to handle with standard system control tools.
Lu: The real improvement is seeing how the specific ladder types expose their own unique dynamical behaviors when you run simulations with step or sweep input signals. Type one shows charging and discharging dynamics, while Type two and three show oscillations.
Meng: Oscillations are interesting, but what about the practical side? If we're deploying a model for something like power grid analysis, how does knowing it oscillates help us manage that instability?
Lalam: It tells you exactly which circuit configuration leads to which kind of response—charging or oscillation—so you can predict the system's long term behavior before you even build the physical thing.
Conclusion: Tom: So, to wrap this up, what’s the final word on this paper about "State space modeling of RLC ladder circuits"? What should we remember?
Jane: We should remember that each ladder type has its own specific dynamical behavior that requires particular analysis because the mathematical structure you get is unique for each one.
Lu: And they've laid out the groundwork for deeper analysis, suggesting things like eigenvalue and eigenvector analysis, and control system methods like controllability and observability as next steps.
Meng: From an engineering standpoint, it gives us a specific target to build our simulators against; if we know the matrix structure is upper triangular or lower finite difference, we know exactly what kind of numerical solver we need to test it with.
Lalam: I’m just confident that this state space modeling approach provides the necessary tools for analyzing these cascades without needing even more complicated modified nodal analysis tools.
Stephan Scholz
cs.CE, cs.SY, eess.SY
Submitted: 2026-08-02
Updated: 2026-11-09
Comments: 18 pages, 7 figures, references added, section 4 added, typos corrected
Code: https://github.com/stephans3/Ellasy.jl
Project page: https://lpsa.swarthmore.edu/Systems/Electrical/mna/MNA1.html
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 69/100
The gist: State space modeling of RLC ladder circuits derives linear time-invariant state space models for three simple ladder types and discusses their specific matrix structures The paper applies standard…
Key concepts
- State Space Modeling
- This technique represents a complex circuit's behavior using a set of variables (states) that describe the system at any given time. It uses linear operators to define how these states change over time, allowing for systematic analysis of circuit dynamics.
- Ordinary Differential Equations (ODE)
- These are mathematical equations that describe how a quantity changes with respect to time. In this paper, applying Kirchhoff's laws to the ladder circuits results in systems of ODEs that govern the voltage and current behavior within each circuit type.
- First-Order System Transformation
- The initial second-order differential equations are converted into a standard first-order form (x_dot = A x + B mu). This transformation is crucial because it allows the system to be represented in a common, standardized state space formulation suitable for simulation and analysis.
Terminology
Summary
State space modeling of RLC ladder circuits derives linear time-invariant state space models for three simple ladder types and discusses their specific matrix structures The paper applies standard nodal analysis on three types of RL C ladders to build systems of ordinary differential equation
Circuit Modeling
The modeling begins with a single circuit of a ladder and demonstrates how to scale this approach for a specific RLC ladder The modeling approach considers nominal electronic components, where a resistor has only pure resistance without inductance or capacitance, and assumes an arbitrary signal voltage source The voltages, currents and the quantities of the electrical components are noted in Table 1. The state space formulation is defined by linear operator mappings F for the main branch and shunt as Fs for the shunt
Derivation of Differential Equations
The derivation involves applying Kirchhoff’s laws to obtain systems of ordinary differential equations (ODE) for each ladder type For Ladder Type 1, the voltage in the main branch is expressed as vn(t) = rnim,n(t) + ln∂tim,n(t), which leads to a second-order differential equation for the shunt voltage For Ladder Type 2 and Type 3, the resulting equations are derived by differentiating the voltage expressions and applying Kirchhoff's voltage law
Second-Order System Formulation
The ODEs are arranged into a second-order system M z¨(t) + D z˙(t) + S z(t) = G µ(t) The resulting second-order systems yield two types of matrices: upper triangular shapes and lower finite difference stencils These matrix shapes correspond to spatially discrete integration and a differentiation, respectively
First-Order System Transformation
The second-order system is reformulated into a first-order system in the common state space formulation x˙(t) = A x(t) + B µ(t) The states are introduced as x1(t) = z(t), x2(t) = ∂tz(t), and the output signal is defined as y(t):= zN(t) The system matrix A, vector B, and output matrix C are determined based on the specific ladder type
Simulation Examples and Dynamics
Simulations demonstrate the dynamical behavior of the three ladder types with step and sweep input signals The results show charging and discharging dynamics for Type 1, while oscillations are observed for Type 2 and Type 3 Specific behaviors are noted, such as a long and intensive oscillation for ladder type 2 in the last shunt The paper concludes that each ladder type exposes its own specific dynamical behavior which requires particular analysis
Conclusion and Outlook
The article describes a state space modeling for three types of electrical ladders by formulating the system matrix A and its sub-matrices AI and AII The authors present two simulations for their ladder models with step and oscillation input signals to emphasize the dynamical behavior of each ladder type Open points include in-depth analysis of eigenvalue and eigenvector analysis, control system methods like controllability, observability, system identification, and feed-forward and feedback control design The story of circuit configurations is not complete yet with three ladder types because parallel connections in the main branch were skipped The simulations are implemented with Julia programming using the Ellasy.jl package and the DifferentialEquations.jl library The source code is stored in EllasyExamples. p. 1 1 (a) and (b), are closely related to
the (spatially approximated) telegraphers equation, which describes
transmission lines, e. Furthermore, we find a similar
model of ladder type 1 in the study of port-Hamiltonian systems, see
the articles [20, 21] and the example “RCL Ladder Network (ODE)”
in the software library PortHamiltonianBenchmarkSystems.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI systems can model large-scale electrical circuits using linear time-invariant state space models for three simple ladder types, enabling a description of complex cascades of resistors, capacitors, and inductors.
-
The improved system can derive specific matrix structures for these second-order differential equations, which are represented by upper triangular matrices or finite difference stencils depending on the ladder type.
-
The system can formulate first-order state space models in the form x dot = A x + B mu, allowing for a transformation into a standard state space formulation where y dot = C top x.
-
The improved AI can simulate the intrinsic dynamical behavior of each ladder type by applying step or sweep input signals, revealing specific behaviors such as charging and discharging dynamics or oscillations.
-
The system can be used to identify unknown state space models from observed state trajectories using methods like RLC 4 Dynamic mode decomposition to infer the underlying circuit structure.
Abstract
Large-scale electrical circuits span a wide range of research topics from highly integrated circuits in microelectronics up to power grids for cities and countries. As the complexity increases significantly by each additional component, we find a need to describe large-scale circuits in a manner easy to understand. In this article, we study cascades of simple circuits consisting of resistors, capacitors and inductors, which we call ladder circuits. Such electrical ladders are common in electronics to design filters and they are also used in other disciplines, for example to describe diffusion or wave phenomena. In particular, we derive linear time-invariant state space models for three simple ladder types and we discuss the specific matrix structures of the large-scale second-order differential equations. Furthermore, we exemplify our findings with simulations to unveil the intrinsic dynamical behavior of each ladder type.
Sources
- On the comparison of three numerical methods applied to building simulation: finite-differences, RC circuit approximation and a spectral method
- "On the engineers' new toolbox" or Analog Circuit Design, using Symbolic Analysis, Computer Algebra, and Elementary Network Transformations
- Passive and reciprocal networks: From simple models to simple optimal controllers
- ModelingToolkit: A Composable Graph Transformation System For Equation-Based Modeling
Related papers
- Constrained Sensing and Reliable State Estimation with Shallow Recurrent Decoders on a TRIGA Mark II Reactor
- DREChanNet: Patient-Relative iEEG Model for Channel-Wise Epileptogenic Zone Localization
- A matrix-free, differentiable PyTorch solver for phase-field fracture: Formulation, benchmarks, and inverse analysis
- BizAgentBench: Unveiling Hidden Challenges in Deploying Long-Horizon Agents for Real-World Business
- Colour me shocked: Exact Molecular Hessians from local MLIPs in O(N) time using sparse differentiation!
- In-context learning as a retraining-free paradigm for constitutive modeling