Low-lying singly heavy baryon states based on the rigorous calculation with the relativized quark model

arXiv:2608.00142 · hep-ph · Submitted 2026-07-31 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Phenomenology. The day in particle phenomenology: models, signatures and constraints.

Kai: We're looking at the paper: "Low-lying singly heavy baryon states based on the rigorous calculation with the relativized quark model".

Paper summary: Kai: To recap where we are: we've seen how this paper uses a relativized quark model with an improved calculation scheme to study low-lying six F singly heavy baryon states, and they achieved a high precision fit with a statistical error of six point nine six mega electron volts.

Mira: And the core thesis is that this method successfully explains the fine structure of negative parity states while systematically analyzing all the complete mass spectra for these families within this framework.

Lev: The paper details how they define their wave functions by dividing them into two sectors, the sextet six F states and the anti-triplet three bar F states, and sets up a specific coupling scheme for spin and orbital wave functions.

Kai: They set up this coupling scheme using quantum numbers like l sub rho, l sub lambda, L, and s sub twelve to define parity P equals negative one times l sub rho plus l sub lambda.

Mira: The Hamiltonian in the relativized quark model includes the kinetic energy term alongside interaction terms such as confinement, hyperfine interaction, and spin-orbit interaction.

Lev: They also break down that spin-orbit interaction into a two body term and a three body term, which is what they use to analyze how those different components contribute to the energy levels of the one S wave and one D wave states.

Kai: For the one S wave states, they found that the Hamiltonian mode determines energy levels, and contributions come solely from contact terms.

Mira: But for the one D wave states, even with those contact terms still causing a big shift, they found that spin-orbital interactions jointly lead to a small energy level splitting.

Lev: This is where you see how the different parts of the Hamiltonian are playing their roles in shaping the final energy spectrum of these baryons.

Kai: Then they analyze the mixing effect by diagonalizing the Hamiltonian matrix in a J P subspace, which causes those energy level shifts we saw earlier.

Mira: They identify that the tensor force is actually the sole contributor to this mixing effect between S wave and D wave states, which is important information for understanding their structure.

Lev: Interestingly, they note that for positive parity six F baryons, this mixing effect can be roughly ignored and L is approximately a good quantum number there.

Kai: That distinction in the mixing effect between positive and negative parity six F baryons might actually explain why the diquark approximation sometimes succeeds when studying singly heavy baryons.

Mira: So, this paper lays out a very detailed framework for understanding these states, linking flavor symmetry to mixing effects and parity dependence in a way that was hard to pin down before.

Conclusion: Kai: So looking at the whole picture from "Low-lying singly heavy baryon states based on the rigorous calculation with the relativized quark model," we've established how this improved scheme handles these states with six point nine six mega electron volt error.

Mira: What this means in simpler terms is that by being very rigorous, they’ve confirmed that the relativistic quark model is a highly precise tool for modeling these low-lying baryons, and it matches experiment very well.

Lev: It shows that even with the complexity of confinement and hyperfine interactions, when you use this specific calculation scheme, you can get results close enough to experimental reality to guide our understanding.

Kai: And the systematic deviations they found in families like Xi prime B c and Sigma B c are telling us where the next steps for refinement should be—we need better parameters or improved relativistic corrections.

Mira: The authors assert that this work provides a reliable reference point for studying the strong interaction within baryon systems, and because of this, we can start to answer questions about what soft QCD actually looks like in these systems.

Lev: And they suggest that by extending the two-step GEM method into other baryon systems, we can explore more details of the strong interaction that is dominated by nonperturbative QCD.

School of Physics and Electronic Science, Guizhou Education University · Department of Mathematics and Physics, North China Electric Power University · China Institute of Atomic Energy

hep-ph

Submitted: 2026-07-31

Updated: 2026-11-18

The gist: Low-lying 6F singly heavy baryon states with positive-parity are studied in detail in the framework of the relativized quark model by using an improved calculation scheme which has successfully…

Key concepts

Relativized Quark Model (RQM)
This is a theoretical framework used to describe how quarks interact within hadrons, incorporating relativistic effects. It includes kinetic energy and various interaction terms like confinement and spin-orbit forces, providing a detailed description of baryon structure.
Improved Calculation Scheme
This is a combination method merging the RQM, HQD, GEM (ISG), mixing effect analysis, two-step GEM, and wave functions. It systematically handles different state sectors (sextet and anti-triplet) to accurately predict energy levels.
Mixing Effect
This refers to the interaction that causes energy level shifts by mixing states with different quantum numbers, such as S-wave and D-wave states. The tensor force is identified as the main contributor to this mixing, which is crucial for understanding baryon fine structure.
Soft QCD
This term refers to the nonperturbative aspects of Quantum Chromodynamics (QCD) that govern the behavior of quarks within baryons at low energies. The study suggests that the 'soft QCD' in low-lying singly heavy baryons closely resembles the predictions made by this specific quark model.

Terminology

Summary

Low-lying 6F singly heavy baryon states with positive-parity are studied in detail in the framework of the relativized quark model by using an improved calculation scheme which has successfully explained the fine structure of the low-lying negative-parity singly heavy baryons The complete mass spectra of all the singly heavy baryon families obtained in the same framework and calculation scheme are systematically analyzed It is found that the mixing effect in the singly heavy baryons depends on the flavor symmetry of the two light quarks and the baryon parity The results show that the high-precision calculation can reproduce most of the data perfectly, and the statistical error between the calculated masses and experimental data is only 6. p. 096 MeV This confirms the reliability of the improved calculation scheme The rigorous calculation achieved by the two-step GEM enables us to analyze the detailed behavior of the various strong interaction components within the baryons with a high-precision and discover the truth of the “soft QCD”

Improved Calculation Scheme

The improved calculation scheme is a combination method which combines together the RQM, HQD, GEM (ISG), mixing effect, two-step GEM and wave function with appropriate symmetry The wave functions are divided into two sectors: the sextet (6F) of the flavor symmetric states and the anti-triplet (3¯F) of the flavor antisymmetric states The spin and orbital wave functions have a coupling scheme defined by (J P)j, Li = [[(lρlλ)L(s1 s2)s12]js3J i, (1) with parity P = (-1)lρ+lλ The Hamiltonian in the RQM includes the kinetic energy term and interaction terms such as confinement, hyperfine interaction, and spin-orbit interaction The spin-orbit interaction Hˆso i j can be decomposed into a two-body term Hˆso−2B i j and a three-body term Hˆso−3B i j

Structural Analysis of States

The analysis details the contribution of each term in the Hamiltonian to the energy levels for the 1S - and 1D-wave states in each singly heavy baryon family of the 6F sector For the 1S-wave states, H mode determines energy levels, and contributions come solely from contact terms Hˆcont For the 1D-wave states, Hˆcont still causes a big energy level shift, while spin-orbital interactions jointly lead to a small energy level splitting

Mixing Effect and Fine Structure

The mixing effect is analyzed by diagonalizing the Hamiltonian matrix in the J P subspace, which causes the energy level shifts The tensor force is identified as the sole contributor to the mixing effect between S - and D-wave states In contrast, for positive-parity 6F baryons, the mixing effect can be roughly ignored and L is approximately a good quantum number This difference in mixing effect between positive-parity and negative-parity 6F baryons might explain why the diquark approximation sometimes succeeds in the study of singly heavy baryons

Accuracy and Conclusion

The arithmetic average deviation between the calculated masses and measured ones is 6.96 MeV, which is the current highest calculation precision The RQM has reached the current highest calculation precision among all theoretical approaches This implies that the RQM is the most precise theoretical approach among all of the quark models and theories The “soft QCD” in the low-lying singly heavy baryons is very similar to the RQM

Systematic Deviations and Future Work

Systematic deviation between the data and the calculated results in the Ξ′b(c) and Σb(c) families remains obvious This suggests that further improvements must be considered in other aspects such as improving the parameters of the RQM, improving the size parameters in the GEM and improving the relativistic correction The large amount of theoretical calculation data obtained in this work provides reliable references for related theoretical study of the strong interaction within the baryon system The improved calculation scheme, especially the twostep GEM may be extended directly to the study of other baryon systems so as to explore more details of the strong interaction dominated by the nonperturbative QCD

REFERENCE

Baryon states marked with (mass)J P are obtained by considering the mixing effect rigorously The baryon states are labeled with (mass)J P and L is no longer regarded as a good quantum number for the 6F baryons Most of the observed singly heavy baryons are assigned reasonably in this mass spectra The uncertainty is only 6.96 MeV, which is the current highest calculation precision This implies that the RQM is the most precise theoretical approach among all of the quark models and theories The perfect match between the mass data and the predicted masses demonstrates the effectiveness and reliability of the improved calculation scheme With these results, a long-standing question could be answered, i. p. 6 p. 6e., what does the “soft QCD” look like? p. 5 p. 5 It can be asserted that the “soft QCD” in the low-lying singly heavy baryons is very similar to the RQM The large amount of theoretical calculation data obtained in this work provides reliable references for related theoretical study of the strong interaction within the baryon system The improved calculation scheme, especially the twostep GEM may be extended directly to the study of other baryon systems so as to explore more details of the strong interaction dominated by the nonperturbative QCD

REFERENCE

Baryon states marked with (mass)J P are obtained by considering the mixing effect rigorously The baryon states are labeled with (mass)J P and L is no longer regarded as a good quantum number for the 6F baryons Most of the observed singly heavy baryons are assigned reasonably in this mass spectra The uncertainty is only 6.96 MeV, which is the current highest calculation precision This implies that the RQM is the most precise theoretical approach among all of the quark models and theories The perfect match between the mass data and the predicted masses demonstrates the effectiveness and reliability of the improved calculation scheme With these results, a long-standing question could be answered, i.e., what does the “soft QCD” look like?

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved ability to predict mass spectra for low-lying singly heavy baryon states by using a combination method of RQM + HQD + GEM(ISG) + two-step GEM + mixing effect + wave functions with appropriate symmetry. This system can perform high-precision calculations for the positive parity 6F singly heavy baryons, reproducing most experimental data with an average deviation of 6.96 MeV.

  2. Enhanced analysis of strong interaction components within baryons by rigorously calculating the contributions of each Hamiltonian term to energy levels and their evolution for 1S- and 1D-wave states. This allows the AI to perform a tomography for the effective strong interaction of the RQM and link force and structure closely.

  3. Accurate determination of mixing effects between orbital excited states with the same J P values by utilizing fixed input parameters from previous high-precision studies. The system can quantify how the mixing effect between these orbital excited states with the same J P for the positive-parity 6F singly heavy baryons is found to be relatively smaller than that for the negative-parity 6F singly heavy baryons.

  4. Precise assignment of spin and parity quantum numbers for most experimentally measured singly heavy baryons by comparing calculated masses with experimental data, achieving an arithmetic average deviation of 6.96 MeV. This capability extends to making assignments like Λc(2910)+ is assigned as the predicted Σc(2913) 1/2+ based on close mass values.

  5. Deeper understanding of the nature of soft QCD in low-lying singly heavy baryons by confirming that the 'soft QCD' in the low-lying singly heavy baryons is very similar to the RQM based on high-precision analysis. This suggests the AI can use this framework as a reliable reference for related theoretical research.

Sources

Related papers