Revisiting Stress Analysis in a Three-Dimensional Elastic Hollow Sphere under Uniaxial Compression via the Inverse Laplace Transform Expressions within an Elastodynamic Framework

arXiv:2607.29286 · physics.class-ph, cond-mat.soft · Submitted 2026-07-31 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.

Kai: We're looking at the paper: "Revisiting Stress Analysis in a Three-Dimensional Elastic Hollow Sphere under Uniaxial Compression via the Inverse Laplace Transform Expressions within an Elastodynamic Framework".

Paper summary: Kai: So we're looking at this paper titled "Revisiting Stress Analysis in a Three-Dimensional Elastic Hollow Sphere under Uniaxial Compression via the Inverse Laplace Transform Expressions within an Elastodynamic Framework". Mira and I are just getting started.

Mira: Yeah, it revisits the stress analysis for a three-dimensional elastic hollow sphere when you compress it uniaxially using an elastodynamic framework. The main thesis is that they are deriving explicit expressions for the displacement and stress coefficients by applying the inverse Laplace transform to the scalar and vector potentials of displacement <ref:2607.29286#pg1>.

Lev: Explicit expressions are key because it moves beyond just incremental forms, which you mentioned earlier. It aims to simplify computational modeling for porous structures <ref:2607.29286#pg2>.

Kai: Right, and what matters is that these explicit expressions should give us practical tools to predict the mechanical performance of those porous materials <ref:2607.29286#pg1>. It sounds like they are trying to make the theoretical understanding of stress behavior in hollow spheres more concrete.

Mira: Exactly, and they do this by solving the dimensionless Navier-Cauchy equation two and then expanding the resulting scalar and vector potentials using Laplace transforms <ref:2607.29286#pg3>. This expansion leads to series involving modified spherical Bessel functions <ref:2607.29286#pg3>.

Lev: And those coefficients, like a n, b n, c n, and d n, are determined by boundary conditions at the surface using orthogonality of Legendre polynomials <ref:2607.29286#pg5>. That’s where the physics gets tied down to the geometry.

Kai: So when they get to the static solutions in the long-time limit, what do we actually see? Does it simplify things enough for us to use it?

Mira: They apply a final value theorem to equations twelve, which gives them explicit expressions for the displacement and stress fields as infinite series involving Legendre polynomials <ref:2607.29286#pg3>. The convergence of these series is confirmed with a truncation limit of Nmax equals one hundred three being sufficient even in the rho equals one limit <ref:2607.29286#pg3>.

Lev: That convergence claim, especially in the density approaches one, that’s something I need to check on real hardware. It tells us how computationally intensive this is for actual simulation runs.

Kai: Okay, so what are the observed results? What did they find about how stress and displacement actually behave in this sphere under compression?

Paper summary: Mira: They found that the magnitude of displacement u underscore st and the second principal stress difference delta sigma st are enhanced near loading points <ref:2607.29286#pg3>. Also, the compression stress decreases to zero while the extension stress becomes larger in the vicinity of the inner surface when rho is greater than rho i <ref:2607.29286#pg3>.

Lev: That change in behavior near the inner surface sounds like a critical point where things get physically interesting for structural integrity <ref:2607.29286#pg3>.

Kai: And there's another observation about the circumferential stress, sigma theta theta, which they noted is peaking at the inner surface when that inner radius becomes sufficiently large <ref:2607.29286#pg3>. That suggests geometry is really driving these stress concentrations.

Mira: Right, and they also found a scaling behavior for displacement and stress components at theta equals pi over two, which can be approximately scaled as u underscore alpha st and sigma alpha beta st are proportional to one minus rho i to the negative one in the thin shell limit <ref:2607.29286#pg3>.

Lev: That scaling behavior is important because it gives us a way to predict how these things behave in simpler, thinner geometries, which is where I need that for real hardware overhead calculations <ref:2607.29286#pg5>.

Kai: It sounds like the paper successfully derived those explicit static solutions for the stress and displacement fields of a three-dimensional elastic hollow sphere under uniaxial compression using elastodynamic theory <ref:2607.29286#pg1>. So, what’s the actual big picture implication of all this work?

Mira: The main implication is that these findings provide insights into the stress distribution, specifically highlighting geometric factors influencing peak stresses at the inner surface <ref:2607.29286#pg3>. It shows how shape dictates where things get stressed most in a hollow body.

Lev: From an error correction standpoint, if you're trying to model a porous material, knowing these explicit stress coefficients means you can tailor the material design to avoid those peaks where the stress is spiking <ref:2607.29286#pg1>.

Kai: And it also shows that the methodology used here is extendable to dynamic problems by evaluating inverse Laplace transform expressions <ref:2607.29286#pg3>. That means we can use this framework to determine displacements and stresses at any given time and location, not just statically.

Mira: Precisely, and when you look at the future work section, they mention that skill in evaluating residues is crucial for categorizing waves based on time and location <ref:2607.29286#pg3>. That points to a way forward for dynamic analysis.

Paper summary: Lev: And they also note that the results reduce to those for solid spheres when considering rho i approaches zero <ref:2607.29286#pg3>. That’s a nice check, showing consistency between the complex model and simpler known cases.

Kai: So, looking at this paper "Revisiting Stress Analysis in a Three-Dimensional Elastic Hollow Sphere under Uniaxial Compression via the Inverse Laplace Transform Expressions within an Elastodynamic Framework", what's the final word on what this study actually achieves?

Mira: They successfully derived explicit static solutions for the stress and displacement fields of a three-dimensional elastic hollow sphere under uniaxial compression using elastodynamic theory <ref:2607.29286#pg1>. It gives us concrete analytical tools for understanding the stress distribution, especially highlighting geometric factors influencing peak stresses at the inner surface <ref:2607.29286#pg3>.

Lev: It’s a solid analytical foundation for when you want to move from just seeing trends to actually designing materials with tailored mechanical properties <ref:2607.29286#pg1>.

Kai: And the methodology is shown to be extendable to dynamic problems by evaluating inverse Laplace transform expressions <ref:2607.29286#pg3>. That means we can use this framework to determine displacements and stresses at any given time and location, not just statically.

Mira: The findings provide insights into the stress distribution, particularly highlighting geometric factors influencing peak stresses at the inner surface <ref:2607.29286#pg3>. It’s about understanding how shape dictates where things get stressed most in a hollow body.

Lev: And this work contributes to broader efforts in understanding and optimizing the behavior of elastic bodies with complex internal geometries, paving the way for that <ref:2607.29286#pg1>.

Kai: So, to wrap up on this paper, the main thing is getting explicit expressions for stress and displacement coefficients through an elastodynamic framework using inverse Laplace transforms <ref:2607.29286#pg1>.

Mira: And it's also shown that the results reduce to those for solid spheres when considering rho i approaches zero <ref:2607.29286#pg3>. That’s a nice check, showing consistency between the complex model and simpler known cases.

Lev: I just want to make sure we emphasize that this is an analytical approach, and the methodology can be extended to dynamic problems by evaluating inverse Laplace transform expressions <ref:2607.29286#pg3>.

Kai: We'll keep an eye on those dynamic extensions, but for now, this paper gives us a robust analytical approach for understanding and predicting the behavior of elastic hollow spheres <ref:2607.29286#pg1>.

Conclusion: Kai: So, we've been looking at how this paper re-examines stress analysis for a three dimensional elastic hollow sphere under uniaxial compression using elastodynamics and inverse Laplace transforms <ref:2607.29286#pg1>.

Mira: Yeah, it’s all about getting those explicit mathematical expressions for the displacement and stress coefficients, which is a big deal because it helps us move past just seeing general trends.

Lev: For me, it’s interesting because those explicit forms are what you need to actually run simulations on real hardware; I need to know how much overhead that math adds.

Kai: Right, so what does this mean for the world in simple terms? It shows exactly how shape influences where the stress builds up most inside a hollow object.

Mira: It pinpoints that peak stress happening at the inner surface when the sphere gets big enough, which is something you can't ignore when designing anything hollow.

Lev: From an engineering standpoint, knowing that geometric factor means you can actually design materials to avoid those high stress spots in porous structures <ref:2607.29286#pg1>.

Kai: And it also shows the math is flexible enough for dynamic problems too; they say you can use those same inverse Laplace transform expressions to find stresses at any time and location, not just when it's static.

Mira: That’s the hook; that method isn't just for a snapshot; it gives us a path forward for analyzing how these materials react under changing loads.

Lev: We need to see how stable those residue calculations are because if we move into dynamic territory, you can't just assume everything is smooth anymore <ref:2607.29286#pg3>.

S. Takadaa, S. Hokadab

Tokyo University of Agriculture and Technology

physics.class-ph, cond-mat.soft

Submitted: 2026-07-31

Updated: 2026-11-14

Comments: 10 pages, 5 figures

DOI: 10.1007/s11223-026-00956-9

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 69/100

The gist: The stress analysis of a three-dimensional elastic hollow sphere subjected to uniaxial compression is revisited using an elastodynamic framework to derive explicit expressions for displacement and…

Key concepts

Elastodynamic Framework
This is a theoretical approach used to model how elastic materials respond to time-dependent forces. It involves solving equations that describe both the spatial deformation (stress and displacement) and the temporal evolution of those deformations, allowing for a more complete understanding of dynamic material behavior.
Navier-Cauchy Equation
This is a fundamental equation in continuum mechanics that describes the equilibrium state of an elastic body under stress. The paper solves its dimensionless form to find explicit mathematical solutions for the displacement and stress fields within the hollow sphere, which are essential for predicting mechanical performance.
Inverse Laplace Transform
This mathematical tool is used to convert complex frequency-domain expressions (derived from the elastodynamic theory) back into time-domain solutions. It allows researchers to find the actual physical displacement and stress values at any specific point and time, making the results practical for engineering applications.

Terminology

Summary

The stress analysis of a three-dimensional elastic hollow sphere subjected to uniaxial compression is revisited using an elastodynamic framework to derive explicit expressions for displacement and stress coefficients <ref:2607. p. 0

Where the paper says it

119 The stress analysis of a three-dimensional elastic hollow sphere subjected to uniaxial compression is revisited, employing an elastodynamic framework. Through the application of the Laplace transform, the scalar and vector potentials of displacement are expanded, facilitating a detailed exploration of the system's mechanical behavior.

29286#pg2> because these results enhance the theoretical understanding of stress behavior in hollow spheres and provide practical tools for predicting the mechanical performance of porous materials <ref:2607. p. 1
Where the paper says it

By leveraging advancements in analytical techniques and computational tools, we aim to derive explicit expressions for the displacement and stress coefficients. These results not only enhance the theoretical understanding of stress behavior in hollow spheres but also provide practical tools for predicting the mechanical performance of porous materials.

29286#pg6>.

Model Description

The study considers an elastic hollow sphere with outer and inner radii given by R o and R i, along with material properties such as mass density, shear modulus, and Poisson's ratio <ref:2607.29286#pg2>. The boundary conditions for the compression are specified by equations (1a) and (1b), involving Legendre polynomials P n (cos θ) <ref:2607. p. 3

Where the paper says it

(7) need to satisfy the boundary conditions (1), where the orthogonality of the Legendre polynomials is used. This yields simultaneous equations, which determine the expressions of the coefficients.

29286#pg5>. Scaled dimensionless parameters are introduced, including rho ≡ r / R o, ũ ≡ G / σ0 u / R o, and the longitudinal wave velocity v L <ref:2607. p. 2
Where the paper says it

𝝆 ≡ 𝒓 𝑅ο , 𝒖̃ ≡ 𝐺 𝜎0 𝒖 𝑅ο , 𝜏 ≡ 𝑣L𝑡 𝑅ο , 𝜎⃡̃ ≡ 𝜎̃ 𝜎0 , (2) where 𝑣L ≡ √2(1 − 𝜈)𝐺/[(1 − 2𝜈)𝜚0 ] is the longitudinal wave velocity of the sphere. Elastodynamic theory.

29286#pg5>.

Theoretical Framework

The elastodynamic theory is applied by solving the dimensionless Navier-Cauchy equation (3) <ref:2607.29286#pg6>. The Helmholtz theorem is used to express the displacement as a sum of scalar and vector potentials <ref:2607. p. 2

Where the paper says it

Under the situation explained in the previous section, we solve the following dimensionless Navier-Cauchy equation [2]: 𝜇 2 𝜕 2 𝜕𝜏 2 𝒖̃ = ∇𝜌 2𝒖̃ + 1 1 − 2𝜈 𝛁𝜌(𝛁𝜌 ⋅ 𝒖̃), (3) with 𝛁𝜌 ≡ 𝑅ο𝛁 and the speed ratio of the primary to the secondary wave given by 𝜇 ≡ √ 2(1 − 𝜈) 1 − 2𝜈 . (4) Let us consider the Helmholtz theorem: 𝒖̃ = 𝛁𝜌𝜑(𝜌, 𝜃) + 𝛁𝜌 × 𝛁𝜌 × 𝜌𝜒(𝜌, 𝜃)𝒆𝜌, (5) where 𝜑 and 𝜒 correspond to scalar and vector potentials, respectively, and 𝒆𝜌 is the unit vector in the 𝜌-direction.

29286#pg6>. These potentials are then expanded using Laplace transforms, leading to expansions in terms of modified spherical Bessel functions i n (s) and k n (s) <ref:2607. p. 2
Where the paper says it

∞ 0 (6) Then, we find that these two quantities are expanded as ℒ[𝜑](𝜌, 𝜃, 𝑠) = ∑ [𝑎𝑛𝑖𝑛 (𝜌𝑠) + 𝑏𝑛𝑘𝑛 (𝜌𝑠)]𝑃𝑛 (cos 𝜃) ∞ 𝑛=0,2,4,⋯ , (7a) ℒ[𝜒](𝜌, 𝜃, 𝑠) = ∑ [𝑐𝑛𝑖𝑛 (𝜇𝜌𝑠) + 𝑑𝑛𝑘𝑛 (𝜇𝜌𝑠)]𝑃𝑛 (cos 𝜃) ∞ 𝑛=0,2,4,⋯ , (7b) where the coefficients 𝑎𝑛, 𝑏𝑛, 𝑐𝑛, and 𝑑𝑛 should be determined by the boundary condition at the surface given by Eq. Here, 𝑖𝑛 (𝑠) and 𝑘𝑛 (𝑠) are the modified spherical Bessel functions of the first and second kinds, respectively, and given by 𝑖𝑛 (𝑠) ≡ √ 𝜋 2𝑠 𝐼𝑛+1/2 (𝑠), 𝑘𝑛 (𝑠) ≡ √ 2 𝜋𝑠 𝐾𝑛+1/2 (𝑠), (8) with the modified Bessel functions of the first and second kinds [15] 𝐼𝑛 (𝑠) ≡ ∑ 1 𝑚!

29286#pg6>. The coefficients a n, b n, c n, and d n are determined by the boundary condition at the surface using orthogonality of Legendre polynomials <ref:2607. p. 8
Where the paper says it

Using linear elastodynamic theory, we introduced scalar and vector potentials to simplify the problem and determined them under the boundary condition. The deformation and stress fields were derived as inverse Laplace forms, with static solutions explicitly expressed as infinite series involving Legendre polynomials.

29286#pg5>.

Static Solution Derivation

The static solutions are obtained in the long-time limit by applying the final value theorem to Eqs. (12) <ref:2607.29286#pg6>. This yields explicit expressions for the displacement and stress fields as infinite series involving Legendre polynomials <ref:2607. p. 8

Where the paper says it

Using linear elastodynamic theory, we introduced scalar and vector potentials to simplify the problem and determined them under the boundary condition. The deformation and stress fields were derived as inverse Laplace forms, with static solutions explicitly expressed as infinite series involving Legendre polynomials.

29286#pg6>. The convergence of these series is confirmed, with a truncation limit of Nmax = 103 being sufficient even in the ρ → 1 limit <ref:2607. p. 5
Where the paper says it

The convergence becomes worse for 𝜌 ≲ 1 as expected in Eqs. However, it is sufficient to adopt 𝑁max = 103 even in the 𝜌 → 1 limit.

29286#pg6>.

Observed Results

The results show that the magnitude of displacement ũ (st) and the second principal stress difference Δsigma (st) are enhanced near loading points <ref:2607.29286#pg6>. The compression stress decreases to zero and the extension stress becomes larger in the vicinity of the inner surface when ρ ≳ ρi <ref:2607. p. 6

Where the paper says it

First, the divergent behaviors of both stresses are observed in the vicinity of the outer surface (𝜌 → 1), which is common with those for a solid sphere. Second, the compression stress decreases to zero and the extension stress becomes larger in the vicinity of the inner surface (𝜌 ≳ 𝜌i ).

29286#pg6>. Furthermore, a peak in the circumferential stress σthetatheta is observed at the inner surface when the inner radius becomes sufficiently large <ref:2607. p. 8
Where the paper says it

Graphical representation of the deformation and principal stress difference provided insights into the stress distribution. Notably, we observed a peak in the circumferential stress 𝜎𝜃𝜃 at the inner surface when the inner radius became sufficiently large, highlighting the significant influence of geometric factors.

29286#pg6>. The scaling behavior of displacement and stress components at θ = π/2 can be approximately scaled as ũalpha (st), σ̃alphabeta (st) ∝ (1 − ρi)−1 in the thin shell limit <ref:2607. p. 8
Where the paper says it

Interestingly, the values at 𝜃 = 𝜋/2 can be approximately scaled as 𝑢̃𝛼 (st) , 𝜎̃𝛼𝛽 (st) ∝ (1 − 𝜌i ) −1 . This can be understood when we consider the thin shell limit of the system.

29286#pg6>.

Conclusion

The study successfully derived explicit static solutions for the stress and displacement fields of a three-dimensional elastic hollow sphere under uniaxial compression using elastodynamic theory <ref:2607.29286#pg6>. The findings provide insights into the stress distribution, particularly highlighting geometric factors influencing peak stresses at the inner surface <ref:2607. p. 8

Where the paper says it

Graphical representation of the deformation and principal stress difference provided insights into the stress distribution. Notably, we observed a peak in the circumferential stress 𝜎𝜃𝜃 at the inner surface when the inner radius became sufficiently large, highlighting the significant influence of geometric factors.

29286#pg6>. The methodology is also shown to be extendable to dynamic problems by evaluating inverse Laplace transform expressions <ref:2607. p. 8
Where the paper says it

Our methodology can be extended to dynamic problems as well. Indeed, by evaluating the inverse Laplace transform expressions, it is possible to determine displacements and stresses at any given time and location [8, 9, 11, 12].

29286#pg6>.

Acknowledgment

The authors thank Hisao Hayakawa for his valuable comments and suggestions <ref:2607.29286#pg6>. This work is supported by the Grant-in-Aid of MEXT for Scientific Research (Grant No. p. 8

Where the paper says it

The authors thank Hisao Hayakawa for his valuable comments and suggestions. This work is supported by the Grant-in-Aid of MEXT for Scientific Research (Grant No.

JP24K06974, No. p. 8
Where the paper says it

This work is supported by the Grant-in-Aid of MEXT for Scientific Research (Grant No. JP24K06974, No.

JP24K07193, and No. p. 8
Where the paper says it

JP24K06974, No. JP24K07193, and No.

JP25K01063) <ref:2607. p. 8
Where the paper says it

JP24K07193, and No. JP25K01063).

29286#pg6>.

Conflict of Interests

All authors declare that they have no conflicts of interest <ref:2607.29286#pg6>.

Author Contributions

The main derivation and analysis were performed by Satoshi Takada <ref:2607.29286#pg6>. The figures were prepared by Shintaro Hokada <ref:2607. p. 8

Where the paper says it

The main derivation and analysis were performed by Satoshi Takada. The figures were prepared by Shintaro Hokada.

29286#pg6>. The first draft of the manuscript was written by Satoshi Takada and all authors commented on previous versions of the manuscript <ref:2607. p. 8
Where the paper says it

The figures were prepared by Shintaro Hokada. The first draft of the manuscript was written by Satoshi Takada and all authors commented on previous versions of the manuscript.

29286#pg6>. All authors read and approved the final manuscript <ref:2607. p. 8
Where the paper says it

The first draft of the manuscript was written by Satoshi Takada and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

29286#pg6>.

REFERENCES

  1. S. P. Timoshenko and J. p. 8

    Where the paper says it

    REFERENCES 1. Timoshenko and J.

    p. 8
    Where the paper says it

    REFERENCES 1. Timoshenko and J.

    N. Goodier, Theory of Elasticity 3rd ed. p. 8
    Where the paper says it

    Timoshenko and J. Goodier, Theory of Elasticity 3rd ed.

    p. 8
    Where the paper says it

    Timoshenko and J. Goodier, Theory of Elasticity 3rd ed.

    , McGraw-Hill (1970) <ref:2607. p. 8
    Where the paper says it

    Goodier, Theory of Elasticity 3rd ed. , McGraw-Hill (1970).

    p. 8
    Where the paper says it

    Goodier, Theory of Elasticity 3rd ed. , McGraw-Hill (1970).

    29286#pg7>.

  2. Y. C. Fung and P. p. 9

    Where the paper says it

    Fung and P. Tong, Classical and Computational Solid Mechanics, World Scientific (2001).

    Tong, Classical and Computational Solid Mechanics, World Scientific (2001) <ref:2607. p. 9
    Where the paper says it

    Fung and P. Tong, Classical and Computational Solid Mechanics, World Scientific (2001).

    29286#pg8>.

  3. L. D. Landau, L. P. Pitaevskii, A. p. 9

    Where the paper says it

    Tong, Classical and Computational Solid Mechanics, World Scientific (2001). Pitaevskii, A.

    M. Kosevich, and E. p. 9
    Where the paper says it

    Pitaevskii, A. Kosevich, and E.

    M. Lifshitz, Theory of Elasticity, Elsevier (1986) <ref:2607. p. 9
    Where the paper says it

    Kosevich, and E. Lifshitz, Theory of Elasticity, Elsevier (1986).

    29286#pg9>.

  4. A. C. Eringen and E. p. 9

    Where the paper says it

    Lifshitz, Theory of Elasticity, Elsevier (1986). Eringen and E.

    S. Şuhubi, Elastodynamics, Vol II Linear Theory, Academic Press (1975) <ref:2607. p. 9
    Where the paper says it

    Şuhubi, Elastodynamics, Vol. II Linear Theory, Academic Press (1975).

    29286#pg10>.

  5. Y. Hiramatsu and Y. p. 9

    Where the paper says it

    II Linear Theory, Academic Press (1975). Hiramatsu and Y.

    Oka, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int J Rock Mech Min Sci Abst, 3, 89–90 (1966). p. 9
    Where the paper says it

    Hiramatsu and Y. Oka, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int J Rock Mech Min Sci Abst, 3, 89–90 (1966).

  6. K. Ramesh and K. p. 9

    Where the paper says it

    Oka, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int J Rock Mech Min Sci Abst, 3, 89–90 (1966). Ramesh and K.

    Shins, Stress field equations for a disk subjected to self-equilibrated arbitrary loads: revisited, Granul Matter, 24, 49 (2022). p. 9
    Where the paper says it

    Ramesh and K. Shins, Stress field equations for a disk subjected to self-equilibrated arbitrary loads: revisited, Granul Matter, 24, 49 (2022).

  7. K. Shins and K. p. 9

    Where the paper says it

    Ramesh and K. Shins, Stress field equations for a disk subjected to self-equilibrated arbitrary loads: revisited, Granul Matter, 24, 49 (2022).

    Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023). p. 9
    Where the paper says it

    Shins and K. Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023).

  8. T. Jingu, K. Hisada, I. Nakahara, and S. p. 9

    Where the paper says it

    Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023). Nakahara, and S.

    Machida, Transient stress in a circular disk under diametrical impact loads, Bulletin JSME, 28, 13–23 (1985). p. 9
    Where the paper says it

    Nakahara, and S. Machida, Transient stress in a circular disk under diametrical impact loads, Bulletin JSME, 28, 13–23 (1985).

  9. T. Jingu and K. p. 9

    Where the paper says it

    Machida, Transient stress in a circular disk under diametrical impact loads, Bulletin JSME, 28, 13–23 (1985). Jingu and K.

    Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985). p. 9
    Where the paper says it

    Jingu and K. Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985).

  10. S. Z. Wu and K. T. Chau, Dynamic response of an elastic sphere under diametral impacts, Mech Mater, 38, 1039–1060 (2006). p. 9

    Where the paper says it

    Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985). Chau, Dynamic response of an elastic sphere under diametral impacts, Mech Mater, 38, 1039–1060 (2006).

  11. Y. Sato, H. Ishikawa, and S. p. 9

    Where the paper says it

    Chau, Dynamic response of an elastic sphere under diametral impacts, Mech Mater, 38, 1039–1060 (2006). Ishikawa, and S.

    Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024). p. 9
    Where the paper says it

    Ishikawa, and S. Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024).

  12. Y. Sato and S. p. 9

    Where the paper says it

    Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024). Sato and S.

    Takada, Revisiting stress propagation in a three-dimensional elastic sphere under diametric loading, Trans JSME (in Japanese), 90, 23-00262 (2024). p. 9
    Where the paper says it

    Sato and S. Takada, Revisiting stress propagation in a three-dimensional elastic sphere under diametric loading, Trans JSME (in Japanese), 90, 23-00262 (2024).

  13. H. Kasano, I. Nakahara, H. p. 9

    Where the paper says it

    Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023). Nakahara, and S.

    Matsumoto, and E. p. 9
    Where the paper says it

    Nakahara, H. Matsumoto, and E.

    Tsuchida, Trans JSME (in Japanese), 41, 2847–2852 (1975). p. 9
    Where the paper says it

    Matsumoto, and E. Tsuchida, Trans JSME (in Japanese), 41, 2847–2852 (1975).

  14. K. Okamura, Y. p. 9

    Where the paper says it

    1299/kikai1938. Okamura, Y.

    Sato, and S. p. 9
    Where the paper says it

    Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024). Sato and S.

    Takada, Displacement and Stress Analysis of an Elastic Hollow Disk: Comparison with Strength of Materials’ Prediction, Strength Mater, 57, 102–114 (2025). p. 9
    Where the paper says it

    Sato, and S. Takada, Displacement and Stress Analysis of an Elastic Hollow Disk: Comparison with Strength of Materials’ Prediction, Strength Mater, 57, 102–114 (2025).

  15. M. Abramowitz and I. p. 9

    Where the paper says it

    Takada, Displacement and Stress Analysis of an Elastic Hollow Disk: Comparison with Strength of Materials’ Prediction, Strength Mater, 57, 102–114 (2025). Abramowitz and I.

    A. Stegun, Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables, Dover (1964). p. 9
    Where the paper says it

    Abramowitz and I. Stegun, Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables, Dover (1964).

  16. W. H. Press, S. A. Teukolsky, W. p. 9

    Where the paper says it

    Stegun, Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables, Dover (1964). Teukolsky, W.

    T. Vetterling, and B. p. 9
    Where the paper says it

    Teukolsky, W. Vetterling, and B.

    P. Flannery, Numerical Recipes 3rd Edition: The Art of Scientific Computing, Cambridge Univ Press (2007). p. 9
    Where the paper says it

    Flannery, Numerical Recipes 3rd Edition: The Art of Scientific Computing, Cambridge Univ. Press (2007).

  17. Y. Yokoyama, B. p. 9

    Where the paper says it

    Press (2007). Yokoyama, B.

    R. Mitchell, A. p. 9
    Where the paper says it

    Yokoyama, B. Mitchell, A.

    Nassiri, B. p. 9
    Where the paper says it

    Mitchell, A. Nassiri, B.

    L. Kinsey, Y. P. Korkolis, and Y. p. 9
    Where the paper says it

    Nassiri, B. Korkolis, and Y.

    Tagawa, Integrated photoelasticity in a soft material: phase retardation, azimuthal angle, and stress-optic coefficient, Opt Lasers Eng 161 107335 (2023). p. 9
    Where the paper says it

    Korkolis, and Y. Tagawa, Integrated photoelasticity in a soft material: phase retardation, azimuthal angle, and stress-optic coefficient, Opt Lasers Eng, 161, 107335 (2023).

Table Definitions

Table 1 lists the expressions of D n (s) and N n, i (s) (i = 1, …, 4) with their associated functions F n, i (s) and G n, i (s) <ref:2607.29286#pg6>. Table 2 lists the expressions of D n and N n (i = 1, …, 6) with the associated coefficients C n (i = 1, …, 4) <ref:2607. p. 3

Where the paper says it

The explicit expressions of the coefficients are given by { 𝑎𝑛 𝑏𝑛 𝑐𝑛 𝑑𝑛 } = { − + − + } 2𝑛 + 1 2 1 𝑠𝐷𝑛 (𝑠) { 𝑁𝑛,1 (𝑠) 𝑁𝑛,2 (𝑠) 𝑁𝑛,3 (𝑠) 𝑁𝑛,4 (𝑠)} , (11) where the coefficients 𝐷𝑛 (𝑠) and 𝑁𝑛,𝑖 (𝑠) (𝑖 = 1, ⋯ , 4) are listed in Table 1. List of the expressions of 𝐷𝑛 (𝑠) and 𝑁𝑛,𝑖 (𝑠) (𝑖 = 1, ⋯ , 4) with the associated functions 𝐹𝑛,𝑖 (𝑠) and 𝐺𝑛,𝑖 (𝑠) (𝑖 = 1, 2, 3).

29286#pg6>.

Key Equations

The inverse Laplace transform expressions for displacement ũrho and stress components are given by Eqs. (12a) through (12f) <ref:2607. p. 4

Where the paper says it

𝜎̃𝜌𝜃 = ∑ (2𝑛 + 1)ℒ −1 [ 𝑁𝑛,4 (𝑠) 𝜌 2𝑠𝐷𝑛 (𝑠) ] sin 𝜃 𝑃𝑛 ′ (cos 𝜃) ∞ 𝑛=0,2,4,⋯ , (12d) 𝜎̃𝜃𝜃 = ∑ (2𝑛 + 1) {ℒ −1 [ 𝑁𝑛,5 (𝑠) 𝜌 2𝑠𝐷𝑛 (𝑠) ] 𝑃𝑛 (cos 𝜃) − ℒ −1 [ 𝑁𝑛,2 (𝑠) 𝜌 2𝑠𝐷𝑛 (𝑠) ] cos 𝜃 𝑃𝑛 ′ (cos 𝜃)} ∞ 𝑛=0,2,4,⋯ , (12e) 𝜎̃𝜙𝜙 = − ∑ (2𝑛 + 1) {ℒ −1 [ 𝑁𝑛,6 (𝑠) 𝜌 2𝑠𝐷𝑛 (𝑠) ] 𝑃𝑛 (cos 𝜃) − ℒ −1 [ 𝑁𝑛,2 (𝑠) 𝜌 2𝑠𝐷𝑛 (𝑠) ] cos 𝜃 𝑃𝑛 ′ (cos 𝜃)} ∞ 𝑛=0,2,4,⋯ , (12f) where ℒ −1 [𝑓] = 1(2𝜋/i) ∫ 𝑓(𝑠)e 𝑠𝑡d𝑠 𝛾+i∞ 𝛾−i∞ indicates the inverse Laplace transform of 𝑓, where 𝛾 (>0) should be larger than any real parts of the poles, and 𝑃𝑛 ′ (cos 𝜃) = d𝑃𝑛 (𝑥)/d𝑥|𝑥=cos𝜃 . In general, the computation of the Laplace transforms is time-consuming.

29286#pg6>. The static solutions are obtained using the final value theorem, resulting in explicit series involving Legendre polynomials <ref:2607. p. 8
Where the paper says it

Using linear elastodynamic theory, we introduced scalar and vector potentials to simplify the problem and determined them under the boundary condition. The deformation and stress fields were derived as inverse Laplace forms, with static solutions explicitly expressed as infinite series involving Legendre polynomials.

29286#pg6>. The magnitude of displacement and principal stress difference are defined as ũ (st) ≡ √(ũrho (st))2 + (ũ θ (st))2 and Δsigma (st) ≡ √(sigmã ρ ρ (st) − σ̃ θ θ (st))2 + 4 σ̃ ρtheta (st)2 <ref:2607. p. 5
Where the paper says it

Let us show the results obtained from the theory. To visualize the results, the (dimensionless) magnitude of the displacement 𝑢̃ (st) and the (dimensionless) second principal stress difference (principal stress difference in (𝜌, 𝜃) plane) Δ𝜎 (st) are often used [17]: 𝑢̃ (st) ≡ √(𝑢̃𝜌 (st) ) 2 + (𝑢̃ 𝜃 (st) ) 2 , Δ𝜎 (st) ≡ √(𝜎̃𝜌𝜌 (st) − 𝜎̃ 𝜃𝜃 (st) ) 2 + 4 (𝜎̃𝜌𝜃 (st) ) 2 .

29286#pg6>.

Convergence and Behavior

The convergence of the series is confirmed, with Nmax = 103 being sufficient in the ρ → 1 limit <ref:2607.29286#pg6>. Figure 4 shows that both compression and extension stresses deviate from those of a solid sphere, with compression stress decreasing sharply as the inner diameter is approached <ref:2607. p. 6

Where the paper says it

Figure 4 clearly shows how those stresses deviate from those of a solid sphere [12]. The compression stress of a hollow sphere is the same in most regions (𝜌i < 𝜌 < 1) compared to those of a solid sphere, and decrease sharply as the inner diameter is approached (𝜌 → 𝜌i ).

29286#pg6>. A peak in the circumferential stress σthetatheta is observed at the inner surface when ρi is not small as shown in Figure 5 <ref:2607. p. 8
Where the paper says it

Graphical representation of the deformation and principal stress difference provided insights into the stress distribution. Notably, we observed a peak in the circumferential stress 𝜎𝜃𝜃 at the inner surface when the inner radius became sufficiently large, highlighting the significant influence of geometric factors.

29286#pg6>. The scaling behavior suggests that ũalpha (st) and σ̃alphabeta (st) are proportional to (1 − ρi)−1 in the thin shell limit <ref:2607. p. 8
Where the paper says it

Interestingly, the values at 𝜃 = 𝜋/2 can be approximately scaled as 𝑢̃𝛼 (st) , 𝜎̃𝛼𝛽 (st) ∝ (1 − 𝜌i ) −1 . This can be understood when we consider the thin shell limit of the system.

29286#pg6>.

Future Work

The methodology can be extended to dynamic problems by evaluating the inverse Laplace transform expressions to determine displacements and stresses at any given time and location <ref:2607.29286#pg6>. However, skill in evaluating residues is crucial for categorizing waves based on time and location <ref:2607. p. 8

Where the paper says it

In such cases, phenomena such as longitudinal waves, transverse waves, and Rayleigh waves traveling along the surface are known to appear [2]. However, as mentioned in the main text, it is crucial to skillfully evaluate the residues and carefully consider which waves have arrived based on the time and location.

29286#pg6>. The study notes that the results reduce to those for solid spheres when considering ρi → 0 <ref:2607. p. 5
Where the paper says it

Therefore, we use 𝑁max = 103 in the following. It should be also noted that the expressions reduce to those for solid spheres [5, 12] when we consider 𝜌i → 0.

29286#pg6>.

  1. S. P. Timoshenko and J. N. Goodier, Theory of Elasticity 3rd ed., McGraw-Hill (1970) <ref:2607.29286#pg7>.

  2. Y. C Fung and P Tong, Classical and Computational Solid Mechanics, World Scientific (2001) <ref:2607. p. 9

    Where the paper says it

    Fung and P. Tong, Classical and Computational Solid Mechanics, World Scientific (2001).

    29286#pg8>.

  3. L D Landau, L P Pitaevskii, A M Kosevich, and E M Lifshitz, Theory of Elasticity, Elsevier (1986) <ref:2607. p. 9

    Where the paper says it

    Kosevich, and E. Lifshitz, Theory of Elasticity, Elsevier (1986).

    29286#pg9>.

  4. A C Eringen and E S Şuhubi, Elastodynamics Vol II Linear Theory, Academic Press (1975) <ref:2607. p. 9

    Where the paper says it

    Şuhubi, Elastodynamics, Vol. II Linear Theory, Academic Press (1975).

    29286#pg10>.

  5. Y Hiramatsu and Y Oka, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int J Rock Mech Min Sci Abst, 3, 89–90 (1966). p. 9

    Where the paper says it

    Hiramatsu and Y. Oka, Determination of the tensile strength of rock by a compression test of an irregular test piece, Int J Rock Mech Min Sci Abst, 3, 89–90 (1966).

  6. K Ramesh and K Shins, Stress field equations for a disk subjected to self-equilibrated arbitrary loads: revisited, Granul Matter, 24, 49 (2022). p. 9

    Where the paper says it

    Ramesh and K. Shins, Stress field equations for a disk subjected to self-equilibrated arbitrary loads: revisited, Granul Matter, 24, 49 (2022).

  7. K Shins and K Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023). p. 9

    Where the paper says it

    Shins and K. Ramesh, Closed-form displacement field equations for a disc subjected to self-equilibrated arbitrary loads, Granul Matter, 25, 38 (2023).

  8. T Jingu, K Hisada, I Nakahara, and S Machida, Transient stress in a circular disk under diametrical impact loads, Bulletin JSME, 28, 13–23 (1985). p. 9

    Where the paper says it

    Machida, Transient stress in a circular disk under diametrical impact loads, Bulletin JSME, 28, 13–23 (1985). Jingu and K.

  9. T Jingu and K Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985). p. 9

    Where the paper says it

    Jingu and K. Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985).

  10. S Z Wu and K T Chau, Dynamic response of an elastic sphere under diametral impacts, Mech Mater, 38, 1039–1060 (2006). p. 9

    Where the paper says it

    Nezu, Transient Stress in an Elastic Sphere under Diametrical Concentrated Impact Loads, Bulletin JSME, 28, 2553–2561 (1985). Chau, Dynamic response of an elastic sphere under diametral impacts, Mech Mater, 38, 1039–1060 (2006).

  11. Y Sato, H Ishikawa, and S Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024). p. 9

    Where the paper says it

    Ishikawa, and S. Takada, Revisiting stress propagation in a two-dimensional elastic circular disk under diametric loading, J Elast, 156, 193–213 (2024).

  12. Y Sato and S Takada, Revisiting stress propagation in a three-dimensional elastic sphere under diametric loading, Trans JSME (in Japanese), 90, 23-00262 (2024). p. 9

    Where the paper says it

    Sato and S. Takada, Revisiting stress propagation in a three-dimensional elastic sphere under diametric loading, Trans JSME (in Japanese), 90, 23-00262 (2024).

  13. H Kasano, I Nakahara, H Matsumoto, and E Tsuchida, Trans JSME (in Japanese), 41, 2847–2852 (1975). p. 9

    Where the paper says it

    Matsumoto, and E. Tsuchida, Trans JSME (in Japanese), 41, 2847–2852 (1975).

  14. K Okamura, Y Sato, and S Takada, Displacement and Stress Analysis of an Elastic Hollow Disk: Comparison with Strength of Materials’ Prediction, Strength Mater, 57, 102–114 (2025). p. 9

    Where the paper says it

    Sato, and S. Takada, Displacement and Stress Analysis of an Elastic Hollow Disk: Comparison with Strength of Materials’ Prediction, Strength Mater, 57, 102–114 (2025).

  15. M Abramowitz and I A Stegun, Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables, Dover (1964). p. 9

    Where the paper says it

    Abramowitz and I. Stegun, Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables, Dover (1964).

  16. W H Press, S A Teukolsky, W T Vetterling, and B P Flannery, Numerical Recipes 3rd Edition: The Art of Scientific Computing, Cambridge Univ Press (2007). p. 9

    Where the paper says it

    Flannery, Numerical Recipes 3rd Edition: The Art of Scientific Computing, Cambridge Univ. Press (2007).

  17. Y Yokoyama, B R Mitchell, A Nassiri, B L Kinsey, Y P Korkolis, and Y Tagawa, Integrated photoelasticity in a soft material: phase retardation, azimuthal angle, and stress-optic coefficient, Opt Lasers Eng 161 107335 (2023). p. 9

    Where the paper says it

    Korkolis, and Y. Tagawa, Integrated photoelasticity in a soft material: phase retardation, azimuthal angle, and stress-optic coefficient, Opt Lasers Eng, 161, 107335 (2023).

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved stress analysis for porous structures by deriving explicit expressions for displacement and stress coefficients, which simplify the computational modeling of porous structures and aid in the design of materials with tailored mechanical properties.

  2. Enhanced predictive capability for material failure by providing practical tools for predicting the mechanical performance of porous materials, moving beyond earlier studies that only determined coefficients in an incremental form.

  3. Application in biomechanics and structural engineering by enabling a deeper understanding of stress behavior in hollow spherical structures and providing insights into phenomena like "the existence of peaks in the middle of 0 < theta < pi/2" at the inner surface for large hole radii.

  4. Dynamic analysis capability by extending the methodology to dynamic problems, allowing determination of displacements and stresses at any given time and location, contingent on skillful evaluation of residues to categorize wave arrivals.

Abstract

The stress analysis of a three-dimensional elastic hollow sphere subjected to uniaxial compression is revisited, employing an elastodynamic framework. Through the application of the Laplace transform, the scalar and vector potentials of displacement are expanded, facilitating a detailed exploration of the system's mechanical behavior. The static solutions for displacement and stress distributions are derived in the long-time limit, which reveal key insights into the response of the elastic hollow sphere. Notably, on the inner surface, certain quantities exhibit a peak at the point where the angle between the compressive force and the point on the surface becomes perpendicular, indicating localized stress concentration. These findings provide a robust analytical approach for understanding and predicting the behavior of elastic hollow spheres under uniaxial loading, with implications for material science and structural engineering.

Related papers