Static Quark-Antiquark Interactions in Rotating SU(3) Gluodynamics

arXiv:2607.26939 · hep-lat, hep-ph, hep-th · Submitted 2026-07-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Static Quark-Antiquark Interactions Under Rotation".

Mira: Here's the gist of the paper. Static quark–antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at imaginary angular velocity provide lattice evidence for a position- and geometry-dependent response of bare static-source free energies to imaginary rotation in a gluonic medium.

Kai: Study Methodology The study investigates static quark–antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at imaginary angular velocity.

Mira: The researchers extract the static potential from Wilson loops for three distinct geometries relative to the rotation axis: quark–antiquark pairs separated along the rotation axis, transverse pairs with one source located on the rotation axis, and symmetric transverse pairs across the rotation axis.

Kai: At finite temperature, they determine color-averaged free energies from Polyakov-loop correlators.

Paper summary: Kai: Okay, so let's go over what this paper "Static Quark–Antiquark Interactions Under Rotation" is actually trying to do. The thesis seems to be that they are studying static quark and antiquark interactions in rotating SU(three) gluodynamics using quenched lattice simulations at imaginary angular velocity <ref:2607.26939#pg1,antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at>.

Mira: That’s right, and the key claim is that they found evidence for a position- and geometry-dependent response of bare static-source free energies to imaginary rotation in a gluonic medium.

Lev: So what does that mean for us? It means the way things react to rotation isn't uniform; it depends on where you are and how you are set up.

Kai: They investigate three specific geometries relative to the rotation axis: quark and antiquark pairs separated along the rotation axis, then transverse pairs with one source located on that axis, and finally symmetric transverse pairs across the rotation axis.

Mira: And at finite temperature, they determine color-averaged free energies from Polyakov-loop correlators, but they also have to manage artifacts in the transverse plane.

Lev: They do this by comparing axial and diagonal directions in the transverse plane to identify a bulk region where those open boundary artifacts are reduced.

Kai: At zero temperature, they report that no significant rotation dependence or anisotropy is observed in the static potential up to an imaginary angular velocity of forty MeV across those three geometries.

Mira: They also confirm that the potentials extracted from all three geometries agreed within their errors, which suggests any rotation-induced anisotropy of the zero temperature static potential is below their current measurement sensitivity.

Lev: That's a solid starting point for understanding what the system looks like at zero temperature before you add complexity.

Kai: But when they move to finite temperature, that’s where things get more interesting; imaginary rotation suppresses the bare color-averaged free energies obtained from Polyakov-loop correlators in both longitudinal and transverse geometries.

Mira: They found a specific form for the large distance shift in the longitudinal geometry, which is proportional to R to the second power times x two plus an approximately position independent term.

Lev: So they are quantifying that suppression based on how far you are from the axis versus some baseline shift.

Kai: The transverse channels show that same qualitative suppression, and their distance dependence also reflects the radial arrangement of the static sources in space.

Mira: They characterize a bulk region where axial and diagonal data are mutually consistent by fitting a free-energy shift described by the quadratic form delta F z of R to the second power x two plus B.

Lev: That specific quadratic form with A and B parameters depending on temperature and imaginary angular velocity is how they model that bulk behavior.

Kai: They suggest this structure is motivated by the rotating-frame formulation, implying that the leading local scalar constructed from the angular velocity and distance to the rotation axis is proportional to omega times r squared.

Mira: So, for someone listening who isn't deep in lattice theory, it means that as you move away from where you are rotating fast, there’s a specific way this interaction shifts based on how far you are from the axis.

Lev: It takes them to parametrize everything with those A and B constants which depend on temperature and imaginary angular velocity.

Kai: They also find a common trend: the rotation-induced modification is strongest near Tc, and then it gets weaker as the temperature is raised deeper into the deconfined phase.

Mira: This contrast between low-temperature and finite-temperature results suggests that the observed effect at finite temperature is predominantly associated with how that thermal gluonic medium responds to rotation.

Lev: It’s interesting because it moves away from just looking at cold matter and shows us something about the hot state of QCD.

Kai: So, this segment sets up what we’ve seen so far: the paper "Static Quark–Antiquark Interactions Under Rotation" is mapping out how rotation affects these interactions in a way that depends on temperature and geometry.

Conclusion: Kai: So wrapping up this discussion on "Static Quark-Antiquark Interactions Under Rotation," the authors are essentially showing that their results are limited to the imaginary angular velocity setup. They’re making it clear that they need to do more work if we want a quantitative analytic continuation to real angular velocity.

Mira: Exactly. They state that a controlled analytic continuation would require a dedicated small imaginary angular velocity determination of Taylor coefficients, including systematic studies of truncation and fit-range dependence.

Lev: It means they aren't giving us the final answer for real rotation yet, but they’re telling us exactly what the next steps in terms of control over those coefficients would be.

Kai: For someone listening who isn't a researcher

Key Laboratory of Quark and Lepton Physics (MOE) · Fakultät für Physik, Universität Bielefeld

hep-lat, hep-ph, hep-th

Submitted: 2026-07-29

Updated: 2026-11-05

Comments: 14 pages, 12 figures

Journal ref: Phys. Rev. D 114, 094501 (2026)

DOI: 10.1103/jf2z-7ws8

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 75/100

The gist: Static quark–antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at imaginary angular velocity provide lattice evidence for a position- and geometry-dependent…

Key concepts

Imaginary Angular Velocity
This method involves simulating the system as if it were rotating with an imaginary angular velocity. It provides a way to probe how the system responds to rotation without needing a full real-time simulation, allowing researchers to extract information about rotation effects in the gluonic medium.
Static Potential from Wilson Loops
The static potential describes the interaction energy between a heavy quark and antiquark separated by a distance. This value is calculated by measuring Wilson loops, which are specific types of paths traced by color charges on the lattice, giving a direct measure of this interaction strength.
Bulk Region Characterization
This refers to a specific region in the simulation where data from different measurement directions (axial and diagonal) are mutually consistent. In this region, the free-energy shift is described by a simple quadratic form that is motivated by the rotating-frame formulation of physics.

Terminology

Summary

Static quark–antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at imaginary angular velocity provide lattice evidence for a position- and geometry-dependent response of bare static-source free energies to imaginary rotation in a gluonic medium. p. 0

Study Methodology

The study investigates static quark–antiquark interactions in rotating SU(3) gluodynamics using quenched lattice simulations at imaginary angular velocity. The researchers extract the static potential from Wilson loops for three distinct geometries relative to the rotation axis: quark–antiquark pairs separated along the rotation axis, transverse pairs with one source located on the rotation axis, and symmetric transverse pairs across the rotation axis. p. 2 At finite temperature, they determine color-averaged free energies from Polyakov-loop correlators. p. 1 To manage boundary artifacts in the transverse plane, axial and diagonal directions are compared to identify a bulk region where open-boundary artifacts are reduced. p. 2

Zero-Temperature Findings

At zero temperature, the analysis of static potentials extracted from Wilson loops revealed no significant rotation dependence or anisotropy in the zero-temperature potential up to an imaginary angular velocity of 40 MeV. The potentials extracted from the three geometries—Wz, Wxy, and W∗xy—also agreed within errors. p. 7 This suggests that any rotation-induced anisotropy of the T ≃ 0 static potential is below the present sensitivity. p. 7 The comparison between open-boundary conditions (OBC) and periodic boundary conditions (PBC) at imaginary angular velocity zero indicates that open-boundary effects are mild for the low-temperature observables and source separations considered here. p. 7

Finite-Temperature Response

At finite temperature, the rotation-induced response is much more pronounced. In the deconfined phase, imaginary rotation suppresses the bare color-averaged free energies obtained from Polyakov-loop correlators. p. 0 For the longitudinal geometry, the large-distance free-energy shift in the selected central region is well described by a contribution proportional to Rxy squared plus an approximately position-independent term. p. 0 The transverse channels exhibit the same qualitative suppression, while their distance dependence additionally reflects the radial arrangement of the static sources. p. 0

Bulk Region Characterization

The bulk region where axial and diagonal data are mutually consistent is characterized by a free-energy shift described by the quadratic form ∆Fz(Rxy) = AR2xy + B. The leading structure of the fit can be motivated by the rotating-frame formulation, suggesting that the leading local scalar constructed from the angular velocity and the distance to the rotation axis is proportional to the square of the local velocity scale, (omegaRxy)2. p. 9 The bulk behavior is parametrized by ∆Fz(Rxy) = AR2xy + B and A and B depending on T and omegaI. p. 9

Conclusion on Rotation Effects

A common trend emerges from all finite-temperature observables studied: the rotation-induced modification is strongest near Tc and becomes weaker as the temperature is raised deeper into the deconfined phase. The contrast between the low- and finite-temperature results suggests that the observed finite-temperature effect is predominantly associated with the response of the thermal gluonic medium. p. 0 The results obtained at imaginary angular velocity are limited to this setup, and a quantitative analytic continuation to real angular velocity requires a dedicated small-omegaI determination of Taylor coefficients. p. 1

Transverse Channel Insights

The transverse observables show an approximately increasing trend with rxy in the central region where the axial and diagonal results remain consistent, which is qualitatively consistent with the expectation that the rotation response grows with the distance from the rotation axis. The comparison between symmetric and longitudinal channels over the bulk range at omegaI = 30 MeV is compatible with a radial single-source free-energy shift. p. 0 In the deconfined bulk region, the dominant transverse response to imaginary rotation is compatible with a radial single-source free-energy shift. p. 0 The agreement observed in Eq. p. 7 (35) shows that no additional rotation-induced two-source contribution is resolved within the present accuracy. p. 0

Summary of Key Parameters

The global fit using the symmetry-guided parametrization ∆Fz(t, omegaI; Rxy) = A2omega 2I t a0−a2omega 2I R 2xy + B2omega 2I t b0−b2omega 2I is shown to capture the main trends of the obtained A and B obtained from fits using Eq. (17) over the explored range of temperatures and imaginary angular velocities. p. 1 The resulting global fit parameters are listed in Table II. p. 5 All fitted coefficients are positive in this range. p. 8 The term proportional to R 2xy has a simple qualitative interpretation as the leading spatial response to the rotating background in the range of Rxy and omegaI explored here. p. 9

Transverse Observable Suppression

The transverse channels exhibit positive values for ∆Fxy and ∆F∗xy where the effect is statistically resolved, indicating a suppression of the transverse free energies by imaginary rotation. The magnitude of this suppression decreases as the temperature is raised above Tc. p. 8 This trend is consistent with the temperature dependence of the fit parameters A and B obtained from ∆Fz(Rxy). p. 8 The suppression in the transverse channels does not isolate a single radial coordinate but contains both the effect of changing the pair separation and the effect of moving one or both static sources away from the rotation axis. p. 0

Analytic Continuation Caveat

The paper stresses that Eq. (25) is introduced only as a compact interpolation of the imaginary-omegaI data over the explored range. p. 9 Although it is an even function of omegaI and can be formally continued via omega 2I → -omega squared for T > Tc, its omegaI-dependent exponents are not derived from a controlled small-omega expansion. p. 8 A controlled analytic continuation would require a dedicated small-omegaI determination of the Taylor coefficients C2n(T, Rxy), including systematic studies of truncation and fit-range dependence. p. 1 The robust conclusion from Figs. p. 8 8 and 9 is that, for T > Tc, imaginary rotation suppresses Fz, and this suppression weakens as the temperature increases. p. 0

Final Interpretation

The term proportional to R 2xy in Eq. (21) is interpreted as the leading spatial response to the rotating background in the range of Rxy and omegaI explored here. p. 9 The intercept B parametrizes the part of ∆Fz that is approximately independent of R 2xy within the selected bulk window. p. 9 The analysis is formulated in the co-rotating frame, where rotation enters through the nontrivial Euclidean metric. p. 4 The static free energy is therefore defined with respect to the Euclidean evolution in this non-inertial frame. p. 1 The analysis is limited to the imaginary-rotation setup. p. 1 Future work should include continuum and finite-volume studies, renormalized Polyakov-loop observables, and extensions to full QCD with dynamical quarks. p. 1

Acknowledgments

The authors thank Defu Hou and Xu-Guang Huang for interesting discussions. This work is supported partly by the National Natural Science Foundation of China under Grants No. p. 0 12325508, No. 12293064 and No. 12293060, as well as the National Key Research and Development Program of China under Contract No. p. 0 2022YFA1604900 and the Fundamental Research Funds for the Central Universities, Central China Normal University under Grants No. p. 0 30101250314 and No. 30106250152. O.K. acknowledges support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through the CRC-TR 211 ‘Strong-interaction matter under extreme conditions’ – project number 315477589 – TRR 211. The numerical simulations have been performed on the GPU cluster in the Nuclear Science Computing Center at Central China Normal University (NSC3). p. 0

References

[1] L. Adamczyk et al. (STAR), Nature 548, 62 (2017), arXiv:1701. p. 006657 [nucl-ex].

[2] M. S. Abdallah et al. (STAR), Phys. Rev. C 104, L061901 (2021), arXiv:2108. p. 000044 [nucl-ex].

[3] F. Becattini and M. A. Lisa, Ann. Rev. Nucl. Part. Sci. 70, 395 (2020), arXiv:2003. p. 003640 [nucl-ex].

[4] D. E. Kharzeev, J. Liao, S. A. Voloshin, and G. Wang, Prog. Part. Nucl. Phys. 88, 1 (2016), arXiv:1511. p. 004050 [hep-ph]. p. 0

[5] K. Fukushima, Prog. Part. Nucl. Phys. 107, 167 (2019), arXiv:1812. p. 008886 [hep-ph]. p. 0

[6] A Yamamoto and Y. p. 1 Hirono, Phys. p. 1 Rev. Lett. 111, 081601 (2013), arXiv:1303. p. 06292 [hep-lat]. p. 0

[7] V. V. Braguta, A. Y. Kotov, D. D. Kuznedelev, and A. A Roenko, Pisma Zh. Eksp. Teoriy Fizik 112, 9 (2020).

[8] V. V. Braguta, A Y Kotov, D D Kuznedelev, and A A Roenko, Phys. Rev. D 103, 094515 (2021).

[9] J.-C. Yang and X. p. 1-G Huang, (2023), arXiv:2307. p. 005755 [hep-lat]. p. 0

[10] V. V. Braguta, A Kotov, A Roenko, and D Sychev, PoS LATTICE2022, 190 (2023), arXiv:2212. p. 003224 [hep-lat]. p. 0

[11] V. Braguta, M Chernodub, E Eremeev, I Kudrov, A Roenko, and D Sychev (2025) arXiv:2512. p. 004070 [hep-lat]. p. 0

[12] M N Chernodub, V A Goy, and A V Molochkov, Phys. Rev. D 107, 114502 (2023).

[13] V V Braguta, M N Chernodub, A A Roenko, and D A Sychev, Phys Lett. B 852, 138604 (2024).

[14] V V Braguta, M N Chernodub, and A A Roenko, Phys Lett. B 855, 138783 (2024).

[15] V V Braguta, M N Chernodub, Y A Gershtein, and A A Roenko, JHEP 09, 079 (2025).

[16] Y Jiang and J Liao, Phys. Rev. Lett. 117, 192302 (2016).

[17] M N Chernodub and S Gongyo, JHEP 01, 136 (2017).

[18] X Wang, M Wei, Z Li, and M Huang, Phys. Rev. D 99, 016018 (2019).

[19] H.-L Chen, Z.-B. Zhu, and X.-G Huang, Phys. Rev. D 108, 054006 (2023).

[20] F Sun, K Xu, and M Huang, Phys. Rev. D 108, 096007 (23).

[21] G Cao, Phys. Rev. D 109, 014001 (24).

[22] F Sun, J Shao, R Wen, K Xu, and M Huang, Phys. Rev. D 109, 116017 (24).

[23] S Chen, K Fukushima, and Y Shimada, Phys. Rev. Lett. 129, 242002 (hep-ph). p. 0

[24] S Chen, K Fukushima, and Y Shimada, Phys Lett. B 859, 139107 (hep-ph). p. 0

[25] K Fukushima and Y Shimada, Phys Lett. B 868, 139716 (2025).

[26] S Wang, J.-X Chen, D Hou, and H.-C Ren (2025) arXiv:2505. p. 015487 [hep-ph]. p. 0

[27] J.-X Chen, S Wang, D Hou, and H.-C Ren, Phys. Rev. D 111, 026020 (25).

[28] O Kaczmarek and F Zantow, Phys. p. 0 Rev. D 71, 114510 (hep-lat/05). p. 0

[29] Y Burnier, H T Ding, O Kaczmarek, A L Kruse, M Laine, H Ohno, and H Sandmeyer, JHEP 11, 206 (hep-lat). p. 0

[30] J.-X Chen, D F Hou, and H C Ren, JHEP 03, 171 (24).

[31] J Zhou, S Zhang, J Chen, L Zhang, and X Chen, Phys Lett. B 844, 138116 (hep-ph). p. 0

[32] A Francis, O Kaczmarek, M Laine, T Neuhaus, and H Ohno, Phys. p. 0 Rev. D 91, 096002 (hep-lat). p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved prediction of rotation-induced free energy shifts in QCD by using a global fit ansatz that incorporates temperature dependence through effective power laws A(t, I) and B(t, I). This allows the AI to predict how these shifts change as temperature varies above Tc or as the imaginary angular velocity changes.

  2. Enhanced ability to distinguish between bulk region effects and boundary artifacts in finite-temperature observables by utilizing axial-diagonal comparisons. The AI can identify a bulk region where open-boundary artifacts are reduced by comparing data along lattice axes versus diagonals.

  3. More accurate estimation of the leading spatial response of the free energy under imaginary rotation using the parametrization DeltaFz(Rxy) = A R2xy + B, where A and B are functions of T and Im angular velocity. This provides a physical interpretation for how the free energy shifts grow with distance from the rotation axis.

  4. Improved sensitivity to real angular velocity effects by utilizing analytic continuation based on Taylor expansion around zero imaginary angular velocity. The AI can estimate the leading quadratic contribution to real rotation, C2(T, Rxy)Omega2I, which dictates whether a positive leading Taylor coefficient implies an enhancement of Fz at leading order for real rotation.

  5. Better characterization of transverse observables by distinguishing between single-source and two-source contributions in the deconfined bulk region. The AI can use the comparison between DeltaFxy(rxy) and DeltaFstar xy(2rxy)/2 to determine if the dominant transverse response is a radial single-source free-energy shift.

Sources

Related papers