AtlasLC: Fast Codec-Ready Compression of Object-Centric 3D Gaussian Splatting

arXiv:2607.26525 · cs.GR · Submitted 2026-07-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Computer Science. The day in computer science: software, systems and theory on arXiv.

Tom: I'm Tom.

Jane: And I'm Jane, here with Lu, Meng and our in-house large language model, Lalam.

Tom: We're looking at the paper: "AtlasLC: Fast Codec-Ready Compression of Object-Centric 3D Gaussian Splatting".

Jane: Here's the gist of the paper. 3D Gaussian Splatting (3DGS) enables photorealistic novel-view synthesis with real-time rendering but deploying compressed object-centric 3DGS in XR requires more than image-space rate–distortion <ref:2607.26525#pg2> In practical XR asset pipelines, reusable objects are repeatedly packaged, transmitted, decoded, and instantiated making asset-preparation cost, codec compatibility, decoding latency, and preservation of depth and silhouette cues first-class concerns <ref:2607.26525#pg4> AtlasLC is a source-free, training-free compression pipeline for object-centric 3D Gaussian Splatting that operates directly on released Gaussian assets without original images, camera poses, or per-asset optimization <ref:2607.26525#pg2> Across the evaluated assets, AtlasLC reduces atlas-preparation time by up to 25× and end-to-end compression time by up to 5× while offering a favorable deployment-aware balance of payload, decode latency, runtime FPS, and 3D geometry relative to the evaluated compressed baselines <ref:2607.26525#pg2> Pruning redundant reasoning tokens AtlasLC couples local-competition pruning with deterministic atlas packing to remove the mapping/remapping bottleneck while preserving object-wide foreground support <ref:2607.26525#pg2> The method consists of three stages: 1.

Tom: Lightweight shared ordering, 2.

Jane: Local-competition pruning, and 3.

Tom: Deterministic atlas packing <ref:2607.26525#pg4> The lightweight shared ordering backbone is a cheap sort-based conditional 2D ordering over the input Gaussians whose role is to regularize the unordered set into a stable coordinate backbone that can be reused downstream <ref:2607.26525#pg4> Local-competition pruning quantizes this shared ordering into coarse competition cells and prunes within each cell using local quotas so that redundancy is removed locally rather than by a single global top-k rule <ref:2607.26525#pg4> The input-adaptive budget and quota allocation computes the keep ratio and target survivor count based only on the input Gaussian count and the fixed atlas capacity, without rendered-quality or per-object validation feedback <ref:2607.26525#pg4> Local survivor selection ranks Gaussians within each cell by a lightweight value score si, selecting the retained set as TopK ones based on that score <ref:2607.26525#pg4> How the training signal is built AtlasLC is entirely training-free, using only geometric initialization, weighted sorting, cell histogramming, quota allocation, and deterministic packing without any learned prior or scene-specific adaptation <ref:2607.26525#pg4> The shared ordering backbone uses a sort-based conditional rank transform that converts base coordinates into structured 2D coordinates using weighted rank transforms with weights wi = max(αi, ε)γ <ref:2607.26525#pg4> This step is used only to produce a stable shared ordering and is not itself an optimization-heavy transport objective <ref:2607.26525#pg4> The local survivor selection uses the fixed opacity score si = αi without perobject tuning or validation feedback <ref:2607.26525#pg4> Where the gains come from The dominant cost arises in shared-ordering construction, where weighted sorting determines the overall time complexity of the pipeline as O(N logN) <ref:2607.26525#pg4> AtlasLC exhibits a favorable rate-dependent trade-off on Objaverse over a common AtlasLC/PLAS/LGSCV payload range, trading a small PSNR decrease for higher precision and recall while maintaining substantially lower total pipeline time <ref:2607.26525#pg2> The reduction in mapping overhead is especially significant, as AtlasLC reduces atlas-preparation time from roughly 900–1700 ms for prior atlas-based pipelines to about 68 ms <ref:2607.26525#pg4> Deterministic packing is the dominant systems component, as it turns a reasonable retained set into a compact, codec-efficient, and fast-to-deploy asset <ref:2607.26525#pg2> Ablation of the two main design choices The ablation reveals a clean division of labor where deterministic packing is essential for payload, decoding efficiency, and total pipeline time <ref:2607.26525#pg2> Without deterministic packing, the pruned representation is not yet a practical codec asset as payload grows from 0.643 MB to 2.848 MB <ref:2607.26525#pg2> Adding deterministic packing reduces payload by 4.43× and lowers total time by 88.5 ms <ref:2607.26525#pg2> Local-competition pruning further improves compactness and geometry under the same packing backbone, as shown when comparing LC pruning only versus full AtlasLC <ref:2607.26525#pg2> The final results show that AtlasLC provides a favorable combination of payload, preparation time, decode latency, FPS, and 3D F1 among the evaluated compressed baselines <ref:2607.26525#pg2> AtlasLC provides a favorable combination of payload, preparation time, decode latency, FPS, and 3D F1 among the compressed baselines <ref:2607.26525#pg2> For object-centric 3DGS in XR, the right target is not bitrate alone but a deployment-aware operating point that jointly balances compactness, preparation cost, decoding efficiency, and geometry preservation <ref:2607.26525#pg2> AtlasLC helps make scalable libraries of reusable radiance-field object assets more practical for XR and motivates future work on interaction-aware, device-aware, and codec-friendly deployment of 3DGS assets <ref:2607.

Title and authors: Meng: That sounds like a lot of computation just to get an order right, though. Is that sorting backbone really that much of a cost? <ref:2607.26525#pg4>

Tom: It is the dominant cost in shared-ordering construction, where weighted sorting determines the overall time complexity of the pipeline as O of n log n <ref:2607.26525#pg4>. But because it’s only done once for a stable coordinate backbone, it pays off later <ref:2607.26525#pg4>.

The paper's summary: Jane: Now that we know how they order things, let’s talk about the actual method described in "AtlasLC: Fast Codec-Ready Compression of Object-Centric three dee Gaussian Splatting <ref:2607.26525#pg1,AtlasLC: Fast Codec-Ready Compression of Object-Centric 3D Gaussian Splatting>." What is the main idea behind this compression pipeline?

Lu: The paper frames this as moving away from traditional scene-scale compaction methods—like pruning or vector quantization—which are usually motivated by just reducing storage size or rendering quality <ref:2607.26525#pg3>. AtlasLC targets post-hoc compression that operates on a trained Gaussian asset without needing the original capture workspace <ref:2607.26525#pg3>.

Tom: They explicitly state they are targeting a different bottleneck than most prior methods because for reusable XR assets, the preparation stage—preprocessing, packaging, encoding, and decoding—is what directly affects how quickly those assets can be used <ref:2607.26525#pg2>.

Jane: So the summary emphasizes that the focus is on that deployment relevance. It’s not just about a final archival step; it’s about making sure the asset gets from release to runtime as fast as possible <ref:2607.26525#pg2>.

Meng: I like this framing because it validates why we're looking at this paper instead of just another storage reduction technique. It connects the compression directly to our production workflow, which is where I spend most of my time <ref:2607.26525#pg4>.

Lu: They describe the methods they use—pruning, quantization, entropy coding, and structured parameterization for codec compatibility—but they say these are generally motivated by scene-scale storage reduction or rendering-oriented compaction <ref:2607.26525#pg3>.

Tom: But AtlasLC distinguishes itself by applying those techniques in a way that is post-hoc on an already trained Gaussian asset <ref:2607.26525#pg3>. They are using the same tools but changing the application context from general scene compression to specific asset compression for XR objects <ref:2607.26525#pg3>.

Jane: So they take established techniques and tailor them specifically for this source-free, post-hoc viewpoint, which seems like a smart way to address the deployment requirements <ref:2607.26525#pg3>.

Meng: I'm still curious about the complexity of those structured parameterizations. Are we talking about something that adds significant overhead during the actual encoding phase? <ref:2607.26525#pg3>

Lu: They mention representative scene-scale compaction methods span pruning, vector quantization, entropy modeling, predictive coding, and rate distortion optimization <ref:2607.26525#pg3>. AtlasLC uses these but applies them in a way tailored to their specific constraints for reusable assets <ref:2607.26525#pg3>.

Tom: The key distinction is that they are achieving this post-hoc compression without needing original images or camera poses <ref:2607.26525#pg2>. That’s the fundamental difference they are trying to exploit <ref:2607.26525#pg2>.

Jane: So the summary is saying that for objects, you can use these sophisticated techniques in a way that bypasses the need for massive scene capture data, which is what makes it deployment relevant <ref:2607.26525#pg3>.

Meng: If this works as described, it means we can potentially create much smaller assets that load faster and don't cause pipeline slowdowns when we deploy them across many different experiences <ref:2607.26525#pg4>.

Lu: That’s the ambition of the research—to find a way to compress these assets so they are ready for deployment without needing original captures or scene-specific optimization <ref:2607.26525#pg3>.

The paper's improvements: Tom: Let's look at the specific improvements AtlasLC suggests in "AtlasLC: Fast Codec-Ready Compression of Object-Centric three dee Gaussian Splatting <ref:2607.26525#pg1,AtlasLC: Fast Codec-Ready Compression of Object-Centric 3D Gaussian Splatting>." What are the tangible benefits they claim?

Jane: They focus on how this method improves things for XR deployment, specifically targeting startup delay, decoding latency, and whether an asset can be fetched and rendered quickly enough for interactive use <ref:2607.26525#pg2>.

Lu: The main claims are a favorable rate-dependent trade-off on Objaverse over a common AtlasLC to PLAS to LGSCV payload range, trading a small picture quality decrease for higher precision and recall while maintaining substantially lower total pipeline time <ref:2607.26525#pg2>.

Meng: A trade-off between quality and speed is always something I have to watch closely. What’s the actual delta they are talking about? Is it a big enough drop in visual fidelity to be acceptable? <ref:2607.26525#pg2>

Tom: They specifically show that the reduction in mapping overhead is particularly significant, cutting atlas preparation time from roughly nine hundred to one thousand seven hundred milliseconds for prior atlas based pipelines down to about sixty eight milliseconds <ref:2607.26525#pg4>.

Jane: Sixty eight milliseconds is a huge drop for asset preparation; that’s what makes the difference between waiting ten seconds and loading instantly in an application <ref:2607.26525#pg4>.

Lu: Deterministic packing is highlighted as the dominant systems component because it turns a reasonable retained set into something compact, codec-efficient, and fast to deploy <ref:2607.26525#pg2>. It's the final step that makes it practical for real use <ref:2607.26525#pg2>.

Meng: So deterministic packing is essentially what takes a decent pruned set and makes it fit into a standard codec efficiently for deployment <ref:2607.26525#pg2>. That’s critical because I need that asset to be ready to ship immediately <ref:2607.26525#pg4>.

Tom: And the ablation shows that adding deterministic packing reduces payload by four point four three times and lowers total time by eighty-eight point five milliseconds compared to without it <ref:2607.26525#pg2>. That’s a solid number for system performance improvement <ref:2607.26525#pg2>.

Jane: So when you put it all together, the improvements boil down to getting lower latency, faster preparation, and better geometry preservation at a deployment-aware balance across those metrics <ref:2607.26525#pg2>.

Lu: And the three dee F1 scores are also improved; they show AtlasLC improves three dee F1 over PLAS by zero point zero zero seven when using matched-payload interpolation <ref:2607.26525#pg2> <ref:2607.26525#pg1>. That means the method is achieving better geometry accuracy than some of the other compressed baselines <ref:2607.26525#pg2>.

Meng: So, if I’m looking for a system that gives me low latency and reasonable quality for production, this paper suggests AtlasLC offers a favorable combination of those things across those evaluated baselines <ref:2607.26525#pg2>.

Conclusion: Tom: So to wrap up the discussion on "AtlasLC: Fast Codec-Ready Compression of Object-Centric three dee Gaussian Splatting <ref:2607.26525#pg1,AtlasLC: Fast Codec-Ready Compression of Object-Centric 3D Gaussian Splatting>." The main point is that AtlasLC provides a favorable combination of payload, preparation time, decode latency, frame rate, and three dimensional fidelity compared to the compressed baselines <ref:2607.26525#pg2>.

Jane: So for someone listening on the show right now who isn't reading the paper, this means we need to stop chasing just one metric like bitrate and start focusing on a deployment-aware operating point that jointly balances compactness, preparation cost, decoding efficiency, and geometry preservation <ref:2607.26525#pg2>.

Lu: It helps make scalable libraries of reusable radiance field object assets more practical for XR and motivates future work on interaction-aware, device-aware, and codec friendly deployment of three deeGS assets <ref:2607.26525#pg2> <ref:2607.26525#pg1>.

Tom: AtlasLC helps make scalable libraries of reusable radiance field object assets more practical for XR and motivates future work on interaction-aware, device-aware, and codec friendly deployment of three deeGS assets <ref:2607.26525#pg2> <ref:2607.26525#pg1>.

Jane: It’s a big step in making these complex three dee representations viable for real-time use in mixed reality experiences <ref:2607.26525#pg1> <ref:2607.26525#pg1>.

Lu: We have a lot to look into with the AtlasLC method for improving representation learning and compression techniques moving forward <ref:2607.26525#pg2>.

KAIST UVR Lab

cs.GR

Submitted: 2026-07-29

Updated: 2026-07-29

Comments: Accepted to IEEE ISMAR 2026 (TVCG)

DOI: 10.1109/TVCG.2026.3747502

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 98/100

The gist: 3D Gaussian Splatting (3DGS) enables photorealistic novel-view synthesis with real-time rendering but deploying compressed object-centric 3DGS in XR requires more than image-space rate–distortion…

Key concepts

Object-centric 3D Gaussian Splatting
This is a method for representing 3D scenes using many small, colored blobs (Gaussians) instead of traditional meshes or voxels. Object-centric means the model focuses on individual, reusable objects rather than the entire scene, which is crucial for efficient asset reuse in applications like XR.
AtlasLC
AtlasLC is a source-free compression pipeline that compresses these 3D Gaussians without needing original images or camera poses. It achieves fast compression by using local competition pruning to remove redundant Gaussians and deterministic atlas packing to create a compact, codec-ready asset suitable for real-time deployment.
Local-competition Pruning
This technique removes redundant 3D Gaussians locally within specific regions of the object. Instead of one global rule, it quantizes the ordering into cells and prunes based on local quotas. This preserves object-wide foreground support while efficiently removing internal redundancy.
Deterministic Atlas Packing
This is a crucial final step that takes the retained set of Gaussians and arranges them into a fixed, compact atlas structure. This process eliminates the mapping/remapping bottleneck, ensuring the final asset is highly efficient for decoding and deployment on target devices.

Terminology

Summary

3D Gaussian Splatting (3DGS) enables photorealistic novel-view synthesis with real-time rendering but deploying compressed object-centric 3DGS in XR requires more than image-space rate–distortion <ref:2607. p. 026525#pg2> In practical XR asset pipelines, reusable objects are repeatedly packaged, transmitted, decoded, and instantiated making asset-preparation cost, codec compatibility, decoding latency, and preservation of depth and silhouette cues first-class concerns <ref:2607. p. 026525#pg4> AtlasLC is a source-free, training-free compression pipeline for object-centric 3D Gaussian Splatting that operates directly on released Gaussian assets without original images, camera poses, or per-asset optimization <ref:2607. p. 026525#pg2> Across the evaluated assets, AtlasLC reduces atlas-preparation time by up to 25× and end-to-end compression time by up to 5× while offering a favorable deployment-aware balance of payload, decode latency, runtime FPS, and 3D geometry relative to the evaluated compressed baselines <ref:2607. p. 026525#pg2>

Pruning redundant reasoning tokens

AtlasLC couples local-competition pruning with deterministic atlas packing to remove the mapping/remapping bottleneck while preserving object-wide foreground support <ref:2607.26525#pg2> The method consists of three stages: 1. p. 3 Lightweight shared ordering, 2. p. 1 Local-competition pruning, and 3. p. 0 Deterministic atlas packing <ref:2607. p. 026525#pg4> The lightweight shared ordering backbone is a cheap sort-based conditional 2D ordering over the input Gaussians whose role is to regularize the unordered set into a stable coordinate backbone that can be reused downstream <ref:2607. p. 326525#pg4> Local-competition pruning quantizes this shared ordering into coarse competition cells and prunes within each cell using local quotas so that redundancy is removed locally rather than by a single global top-k rule <ref:2607. p. 326525#pg4> The input-adaptive budget and quota allocation computes the keep ratio and target survivor count based only on the input Gaussian count and the fixed atlas capacity, without rendered-quality or per-object validation feedback <ref:2607. p. 326525#pg4> Local survivor selection ranks Gaussians within each cell by a lightweight value score si, selecting the retained set as TopK ones based on that score <ref:2607. p. 426525#pg4>

How the training signal is built

AtlasLC is entirely training-free, using only geometric initialization, weighted sorting, cell histogramming, quota allocation, and deterministic packing without any learned prior or scene-specific adaptation <ref:2607.26525#pg4> The shared ordering backbone uses a sort-based conditional rank transform that converts base coordinates into structured 2D coordinates using weighted rank transforms with weights wi = max(αi, ε)γ <ref:2607. p. 326525#pg4> This step is used only to produce a stable shared ordering and is not itself an optimization-heavy transport objective <ref:2607. p. 326525#pg4> The local survivor selection uses the fixed opacity score si = αi without perobject tuning or validation feedback <ref:2607. p. 426525#pg4>

Where the gains come from

The dominant cost arises in shared-ordering construction, where weighted sorting determines the overall time complexity of the pipeline as O(N logN) <ref:2607.26525#pg4> AtlasLC exhibits a favorable rate-dependent trade-off on Objaverse over a common AtlasLC/PLAS/LGSCV payload range, trading a small PSNR decrease for higher precision and recall while maintaining substantially lower total pipeline time <ref:2607. p. 126525#pg2> The reduction in mapping overhead is especially significant, as AtlasLC reduces atlas-preparation time from roughly 900–1700 ms for prior atlas-based pipelines to about 68 ms <ref:2607. p. 126525#pg4> Deterministic packing is the dominant systems component, as it turns a reasonable retained set into a compact, codec-efficient, and fast-to-deploy asset <ref:2607. p. 826525#pg2>

Ablation of the two main design choices

The ablation reveals a clean division of labor where deterministic packing is essential for payload, decoding efficiency, and total pipeline time <ref:2607.26525#pg2> Without deterministic packing, the pruned representation is not yet a practical codec asset as payload grows from 0. p. 8643 MB to 2. p. 6848 MB <ref:2607. p. 026525#pg2> Adding deterministic packing reduces payload by 4. p. 843× and lowers total time by 88. p. 85 ms <ref:2607. p. 026525#pg2> Local-competition pruning further improves compactness and geometry under the same packing backbone, as shown when comparing LC pruning only versus full AtlasLC <ref:2607. p. 626525#pg2> The final results show that AtlasLC provides a favorable combination of payload, preparation time, decode latency, FPS, and 3D F1 among the evaluated compressed baselines <ref:2607. p. 826525#pg2>

Conclusion

AtlasLC provides a favorable combination of payload, preparation time, decode latency, FPS, and 3D F1 among the compressed baselines <ref:2607.26525#pg2> For object-centric 3DGS in XR, the right target is not bitrate alone but a deployment-aware operating point that jointly balances compactness, preparation cost, decoding efficiency, and geometry preservation <ref:2607. p. 826525#pg2> AtlasLC helps make scalable libraries of reusable radiance-field object assets more practical for XR and motivates future work on interaction-aware, device-aware, and codec-friendly deployment of 3DGS assets <ref:2607. p. 8

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved asset preparation for XR applications by reducing atlas-preparation time by up to 25 times and end-to-end compression time by up to 5 times through AtlasLC.

  2. Enhanced preservation of geometry cues, including silhouette and depth support, during compression by using local-competition pruning which removes redundancy inside neighborhoods while preserving support diversity across the object rather than aggressive global pruning.

  3. Faster asset deployment and lower decode latency on mobile devices because AtlasLC is codec-compatible by construction and its deterministic atlas packing removes the mapping/remapping bottleneck that otherwise inflates asset-preparation and total compression pipeline time.

  4. Better runtime performance on head-mounted displays (HMDs) as AtlasLC achieves the fastest on-device decode time and the highest average FPS among the compressed baselines while maintaining a favorable payload.

  5. Improved 3D geometry accuracy in XR applications by achieving higher 3D F1 scores, such as +0.007 over LGSCV when using matched-payload interpolation, showing that AtlasLC improves 3D F1 over PLAS by +0.0050.

Sources

Related papers