Phase Singularities as a Route to Partial Incoherence in Coupled Oscillators -- From Experiment to Theory
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Nonlinear Sciences. The day in nonlinear science: chaos, patterns, networks and adaptation.
Kai: We're looking at the paper: "Phase Singularities as a Route to Partial Incoherence in Coupled Oscillators -- From Experiment to Theory".
Mira: Here's the gist of the paper. Phase-only models have contributed significantly to the understanding of synchronization; however, they do not account for dynamical scenarios where amplitude dynamics matter.
Kai: This study identifies an amplitude-mediated transition from complete frequency coherence to partial incoherence observed both in an electrochemical silicon-etching experiment and within a population of globally coupled heterogeneous Stuart–Landau oscillators.
Mira: Experimental Observation and Model Mapping The experimental system involves the anodic electrochemical dissolution of silicon as a model for coupled oscillators.
Kai: In this experiment, the system transitions from a bimodal-amplitude solution with a homogeneous dominant frequency to one with one locked frequency and many drifting dominant frequencies.
Title and authors: Kai: So we're looking at this paper called "Phase Singularities as a Route to Partial Incoherence in Coupled Oscillators -- From Experiment to Theory." It sounds like it’s trying to fix something phase-only models miss about how things synchronize when the actual size or amplitude of the oscillations matters.
Mira: Right, Kai. It suggests that just looking at the phases isn't enough for these kinds of dynamic scenarios, and this study finds a specific mechanism where the actual amplitude dynamics drive a transition from perfect timing to something more partial.
Lev: From my side, what I’m interested in is how this amplitude-mediated part actually shows up on real hardware when we try to build these coupled systems. Does it require some kind of complex control or just inherent system properties?
Kai: Well, the paper points to an electrochemical silicon etching experiment and also a population of globally coupled Stuart–Landau oscillators, which is a classic model for this sort of thing. They’re showing a transition from one state with all frequencies locking to another where you have one frequency locked and many others drifting.
Mira: That transition isn't just some random drift; the theory suggests it happens because of successive secondary Hopf bifurcations in the low-amplitude oscillators, which then create what they call amplitude defects.
Lev: An amplitude defect, so a localized change in the amplitude that causes something to happen to its frequency? Does this mean we’re talking about a very specific kind of instability where one oscillator gets stuck with a new frequency while others break away?
Kai: Exactly. The paper explains that when these modulations cause oscillators to experience amplitude defects, the winding number changes, which converts that secondary frequency into a new mean frequency specific to that individual oscillator.
Mira: So it’s not just one single mode failing; it’s a chain reaction of local events—these amplitude defects—that reshapes the entire collective state into this partially incoherent picture.
Lev: If we translate this to running this on, say, superconducting circuits, does that mean we have to worry about how the coupling strength affects these amplitude defects? Because if the coupling is too weak or too strong, does the whole mechanism just vanish?
Kai: The paper sets some requirements for observing this transition. They need a sufficiently strong global coupling so that amplitude dynamics are actually relevant and you see a frequency-locked solution under that strong coupling.
Title and authors: Mira: And they also mention needing some heterogeneity in the system, meaning different amplitudes in the frequency-locked solution, plus the coupling function needs to introduce some repulsion to get that bimodal distribution of amplitudes.
Lev: That sounds like a lot of tuning for an experimental setup. How much overhead would you expect from building a real system that meets those three requirements? Would it be computationally intractable or just hard to isolate?
Kai: The experimental setup they describe involves an electrochemical cell, some illumination, and an ellipsomicroscope for imaging the surface. They used single-crystalline silicon wafers cut into seven by seven millimeter square samples.
Mira: And they tested this by varying the illumination intensity stepwise between three point one three and zero point seven seven milliwatt per centimeter squared using an electronically controlled neutral density filter.
Lev: From a hardware perspective, getting that kind of surface imaging data with enough precision to resolve these amplitude changes sounds incredibly demanding. What's the fidelity you need on that measurement record to actually capture the effects of these defects?
Kai: The paper uses equation five from their work to extract both phase and amplitude from an ellipsomicroscopy signal, which gives them access to time-averaged amplitudes and phase snapshots across the entire electrode surface.
Mira: And they found something interesting in their frequency analysis: at illumination intensity of zero point nine four milliwatt per centimeter squared, the observed sideband frequency is exactly equal to the difference between the locked frequency and the Hopf frequency.
Lev: That specific numerical relationship—omega sb equals the absolute value of omega lock minus omega H—that’s a concrete prediction. What does that mean for someone who only listens to show? It suggests a measurable spectral feature you can look for in your measurements.
Kai: It means that when you see that peak in your signal, it’s directly related to the frequency difference caused by the amplitude defect mechanism they described. The paper also notes that this novel peak is very close to omega lock minus omega H.
Mira: But they have a caveat there; they attribute the observed deviation in their specific experimental results at zero point nine four milliwatt per centimeter squared to the finite length of the recorded time series.
Title and authors: Lev: So, if I’m trying to replicate this on a real system, do I need an infinitely long measurement record? That would make real-world testing very difficult for capturing that precise peak.
Kai: The paper suggests that for their specific results, that finite length is why the observed frequency deviation is there. But they also mention how the first Hopf bifurcation occurs at K equal to K H B, where the participation ratio is one point zero zero zero one nine four.
Mira: That participation ratio being so close to one means the instability isn't just happening across the whole locked population; it’s strongly localized on just one low-amplitude oscillator. That’s a key piece of information for understanding where these defects originate.
Lev: Localized instability is good because it helps narrow down the complexity you have to model when you try to implement this in error correction schemes. It suggests the critical mode is small, which is usually easier to handle than a global one.
Kai: So, overall, what this paper really contributes for us right now is showing that we can use amplitude dynamics as a mechanism for incoherence that phase-only models just completely miss.
Mira: It moves us beyond the assumption that amplitude deviations are always small enough to be ignored and shows how localized events can trigger a shift in the mean frequency of oscillators.
Lev: For real hardware, this tells us we have to look at amplitude as a primary variable in our stability analysis, not just secondary corrections.
Kai: This whole work is based on this paper, "Phase Singularities as a Route to Partial Incoherence in Coupled Oscillators -- From Experiment to Theory." It really connects the dots between what's seen in silicon etching and the theoretical Stuart–Landau model.
Mira: So, we’ve covered how amplitude defects drive the transition, and they’ve laid out the specific experimental requirements for observing this effect.
Lev: I think from an engineering standpoint, it gives us a much clearer picture of where to look for those instabilities in our next generation of coupled systems. We need to focus on inducing that bimodal distribution of amplitudes we talked about.
Kai: Exactly. So, we’re seeing how these amplitude-mediated transitions happen and what the math looks like when you go beyond just phase dynamics. It's a different route to understanding synchronization in complex media than before.
The paper's summary: Kai: So, this paper is looking at how amplitude matters in these coupled systems, not just the phases of them.
Mira: Right, it's about phase-only models missing a whole part of the picture when you want to see what actually happens in real dynamics.
Kai: It shows this transition from complete frequency locking to partial incoherence happening because of amplitude dynamics.
Mira: Specifically, they found this effect both in an electrochemical silicon etching experiment and with a group of oscillators called Stuart–Landau oscillators.
Lev: So, the core idea here is that the amplitude itself drives a change in how the frequencies behave across the whole system.
Kai: Exactly, and what’s really interesting is they map this experimental observation onto a specific theoretical model of globally coupled heterogeneous Stuart–Landau oscillators.
Mira: That theoretical framework lets them look at things beyond just looking at the phases on paper and see what’s happening when the amplitude dynamics are involved.
Lev: When you look at the math, they track phase and frequency order parameters along this adiabatic continuation to see how everything evolves.
Kai: They found that even in that high-amplitude subgroup, it stays pretty well phase locked, with a value of one point high for the coherence parameter.
Mira: But as the transition happens, things get messy; you get this group maintaining lock while another group develops a spread out frequency branch.
Lev: And they explain this transition is triggered by these secondary Hopf bifurcations in those low-amplitude oscillators that create amplitude defects.
Kai: Those defects change the winding number, which turns that secondary frequency into a new mean frequency unique to each individual oscillator.
Mira: So what this means for us is that we have a new route to incoherence that wasn't accessible through just looking at the phase dynamics alone.
Lev: It suggests that amplitude oscillators have this extra degree of freedom because of how they move radially, and that’s what opens up these new dynamical possibilities.
Kai: The paper outlines three specific experimental requirements you need to meet if you want to see this kind of transition in an oscillatory medium.
Mira: First, you need strong global coupling so the amplitude dynamics actually matter and the system stays frequency locked under that coupling.
Lev: Second, there needs to be some heterogeneity in the system, meaning different amplitudes in that locked solution we talked about earlier.
Kai: And third, you need a coupling function that introduces some repulsion to get that bimodal distribution of amplitudes they are looking for.
Mira: Experimentally, they used an electrochemical cell with silicon wafers and varied illumination intensity between three point one three and zero point seven seven milliwatt per centimeter squared.
Lev: The numerical integration method uses Julia packages like SciML OrdinaryDiffEq to solve the governing equations numerically, drawing intrinsic frequencies from a Mersenne Twister seed.
Kai: And their frequency analysis in the rotating frame showed that before an amplitude defect appears, the frequency is exactly the locked frequency.
Mira: But after that winding transition happens, they find that it shifts to something like lock minus hop frequency for those specific low-amplitude modes.
Lev: The FFT analysis at zero point nine four milliwatt per centimeter squared confirmed this relationship between the observed sideband frequency and the difference between the locked frequency and the Hopf frequency.
Kai: But they also flagged that their specific result at zero point nine four milliwatt per centimeter squared has a bit of a caveat because of the finite length of their recorded time series.
Mira: That's important, because it means that for their particular experiment, this peak in the signal is very close to that calculated difference, but it’s limited by how long they actually measured.
Lev: It also noted that the first Hopf bifurcation happens at a participation ratio of one point zero zero zero one nine four, which means the instability is localized on just one low-amplitude oscillator.
Kai: That localization tells us that the critical mode isn't some massive collective thing; it’s very focused on just one oscillator in that group.
Mira: So what this all boils down to for us is using amplitude defects as a specific pathway to partial incoherence in heterogeneous amplitude-oscillator media.
Lev: It really pushes us toward needing to include the amplitude dynamics explicitly when we try to model stability and error correction for real hardware.
The paper's improvements: Tom: So, we're looking at how they suggest fixing or improving this paper on amplitude dynamics driving partial incoherence.
Kai: They suggest that for AI systems to predict these transitions, they need to model the amplitude dynamics, not just the phase information anymore.
Mira: Right, it’s about moving past phase-only models so that the AI can actually see how frequency dispersion happens in those heterogeneous oscillator populations.
Lev: From an error correction standpoint, incorporating amplitude defects into dynamical systems gives AI a way to understand how localized events trigger changes in the mean frequency.
Kai: That capability allows the AI to model that conversion of secondary frequencies into new frequencies specific to each oscillator as we saw in the silicon etching experiment.
Mira: So, an improved AI system can analyze those experimental signals from things like ellipsomicroscopy by pulling out both amplitude and phase information at the same time.
Lev: That dual representation lets the AI tell the difference between a frequency that's locked and one that's just drifting based on how much amplitude is changing.
Kai: The paper also says that using the Stuart–Landau model framework lets AI look at collective dynamics even when the coupling strength is quite high.
Mira: That means AI can predict complex behaviors like multistability or quasiperiodic states which are impossible to see with simpler models.
Lev: That’s good for real hardware because it helps us predict what kind of weird dynamical behavior we might encounter before we actually build the system.
Kai: The system can be trained to recognize experimental conditions that lead to specific frequency shifts in the Fourier spectrum, like identifying that sideband frequency equal to the difference between the locked frequency and the Hopf frequency.
Mira: That gives us a predictive tool for analyzing local deviations in our measurements, which is super useful when you’re trying to characterize a physical system.
Lev: It means we can use AI to look at raw data and immediately spot if it looks like it’s heading toward this amplitude-mediated transition.
Kai: So, the main improvement is that we can use the Stuart–Landau framework to investigate collective dynamics without relying only on phase approximations.
Mira: The authors show that they can propose a general new route to partial incoherence in heterogeneous amplitude-oscillator media through these localized events.
Lev: And for us, it means we need to start including amplitude as a primary variable in our stability analysis, not just some secondary correction term.
Conclusion: Tom: So, we're wrapping up this discussion on "Phase Singularities as a Route to Partial Incoherence in Coupled Oscillators."
Kai: Basically, we've seen how amplitude defects act as a mechanism that drives transitions from complete frequency locking to partial incoherence in coupled systems.
Mira: It shows that amplitude dynamics are crucial and phase-only models just don't capture this specific way things break down.
Lev: For us building real hardware, it points toward needing to treat amplitude as a primary variable instead of just some secondary correction factor.
Kai: The implication is that we can use these localized events, these amplitude defects, to understand how mean frequencies shift based on the local oscillator state.
Mira: It gives us a new theoretical path for understanding synchronization in complex media where amplitudes play a big role.
Lev: And it changes how we plan error correction because now we have a clearer picture of the localized instabilities that need to be handled.
Kai: We’re really looking at how this paper connects the silicon etching experiment directly to the Stuart–Landau model framework for these collective dynamics.
Mira: It solidifies the idea that these specific experimental conditions—like strong coupling and heterogeneity—are necessary to observe this amplitude-mediated shift.
Lev: And it gives us a concrete set of requirements: you need strong coupling, some amplitude heterogeneity, and a repelling coupling function to even see it happen.
Kai: So, the big picture is that we have a better way to model how oscillators can transition into partial incoherence when their amplitudes matter.
Mira: It’s an interesting piece of work showing that localized events can reshape the entire collective state in a predictable way.
Lev: I think this paper sets up some really solid direction for our next research steps on building systems that exhibit these kinds of transitions.
School of Natural Sciences, Physics Department, Technische UniversißeMünchen
nlin.PS
Submitted: 2026-07-17
Updated: 2026-11-11
Comments: 28 pages, 9 figures
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 83/100
The gist: Phase-only models have contributed significantly to the understanding of synchronization; however, they do not account for dynamical scenarios where amplitude dynamics matter.
Key concepts
- Phase-only models
- These simpler models only consider the timing or phase relationship between oscillators, ignoring the actual size or amplitude of their oscillations. They fail to explain transitions where frequency dispersion occurs because they cannot account for how amplitude variations influence collective behavior.
- Amplitude defects
- These are localized events in the system caused by modulations in oscillation amplitudes. When these defects occur, they change the winding number, which causes a secondary frequency to convert into a new, oscillator-specific mean frequency, leading to partial incoherence.
- Globally coupled heterogeneous Stuart–Landau oscillators
- This is the theoretical model used to describe collective dynamics beyond simple phase approximations. It allows researchers to study how different amplitude groups behave when coupled together, revealing complex states like frequency locking and drifting frequencies.
- Amplitude-mediated transition
- This describes the specific process where changes in oscillation amplitude drive the system from a state of perfect frequency coherence to one where some oscillators maintain a locked frequency while others develop dispersed or drifting frequencies.
Terminology
Summary
Phase-only models have contributed significantly to the understanding of synchronization; however, they do not account for dynamical scenarios where amplitude dynamics matter. p. 0 AMPLITUDE-DEFECT MEDIATED TRANSITION TO
PARTIAL INCOHERENCE – FROM EXPERIMENT TO
THEORY
A PREPRINT
Nicolas Thomé1
, Yukiteru Murakami1
, Yannick Schöhs1
, and Katharina Krischer1
∗
1School of Natural Sciences, Physics Department, Nonequilibrium Chemical Physics, Technische
Universität München, James-Franck-Str. 1, D-85748 Garching, Germany
July 20, 2026
ABSTRACT
Phase-only models have contributed significantly to the understanding of synchronization; however, they do not account for dynamical scenarios where amplitude
dynamics matter. 1, D-85748 Garching, Germany
July 20, 2026
ABSTRACT
Phase-only models have contributed significantly to the understanding of synchronization; however, they do not account for dynamical scenarios where amplitude
dynamics matter. This study identifies an amplitude-mediated transition from complete frequency coherence to partial incoherence, observed both in an electrochemical
silicon-etching experiment and within a population of globally coupled heterogeneous Stuart–Landau oscillators.Where the paper says it
Where the paper says it
Experimental Observation and Model Mapping
The experimental system involves the anodic electrochemical dissolution of silicon as a model for coupled oscillators. In this experiment, the system transitions from a bimodal-amplitude solution with a homogeneous dominant frequency to one with one locked frequency and many drifting dominant frequencies. p. 1 Here, we introduce an amplitudemediated transition from synchrony to partial incoherence that arises in experiments involving an
oscillatory, continuous medium with strong global coupling and weak diffusive coupling. The
experimental system transitions from a bimodal-amplitude solution with a homogeneous dominant
frequency [20] to a solution with one locked frequency, and many drifting dominant frequencies. The
experimental system transitions from a bimodal-amplitude solution with a homogeneous dominant
frequency [20] to a solution with one locked frequency, and many drifting dominant frequencies. We elucidate the mechanism of the transition using a system of globally coupled heterogeneous
Stuart–Landau oscillators.Where the paper says it
Where the paper says it
Mechanism of Amplitude Defect Transition
The transition to partial incoherence is triggered by successive secondary Hopf bifurcations in low-amplitude oscillators. When these modulations cause oscillators to experience amplitude defects, the winding number changes, converting the secondary frequency into a new, oscillator-specific mean frequency. p. 0 Strong coupling introduces a bimodal-amplitude
distribution from which the transition to partial incoherence is triggered by successive
secondary Hopf bifurcations in low-amplitude oscillators. When these modulations
cause oscillators to experience amplitude defects, the winding number changes,
converting the secondary frequency into a new, oscillator-specific mean frequency. When these modulations
cause oscillators to experience amplitude defects, the winding number changes,
converting the secondary frequency into a new, oscillator-specific mean frequency. This mechanism results in a partially incoherent state, in which one amplitude group
maintains frequency locking while another develops a dispersed frequency branch.Where the paper says it
Where the paper says it
Theoretical Framework and Order Parameters
The theoretical description employs the globally coupled heterogeneous Stuart–Landau model to investigate collective dynamics beyond the phase approximation. Macroscopic characterization is achieved by evaluating phase- and frequency-based order parameters along the adiabatic continuation. p. 9 Macroscopic description of the transition To characterize the amplitude-mediated transition at
the population level, phase- and frequency-based order parameters (defined in eqs. (9) and (11))
are evaluated along the adiabatic continuation shown in Fig. Figure 5(a) should be interpreted from right to left as K decreases. The high-amplitude
subgroup maintains near-perfect phase coherence throughout the transition, with Rhigh ≃ 1.Where the paper says it
Where the paper says it
Implications for Nonlinear Dynamics
The proposed mechanism demonstrates that amplitude defects offer a pathway to incoherence that phase-only models cannot capture. This extends beyond the limitations of phase-only models because amplitude oscillators possess an additional degree of freedom due to radial dynamics. p. 1 Such states with
small or zero amplitudes were found in experiments [13, 14], indicating the relevance of amplitude
dynamics. A further effect of the additional amplitude degree of freedom is enabling synchronization
by an adaptation of amplitudes [15, 16]. Strong coupling introduces a bimodal-amplitude
distribution from which the transition to partial incoherence is triggered by successive
secondary Hopf bifurcations in low-amplitude oscillators. When these modulations
cause oscillators to experience amplitude defects, the winding number changes,
converting the secondary frequency into a new, oscillator-specific mean frequency.Where the paper says it
Where the paper says it
Experimental Requirements for Transition
To observe such a transition in an oscillatory medium, three requirements must be met. These requirements are: 1) sufficiently strong global coupling to ensure that amplitude dynamics are relevant and that the system displays a frequency-locked solution under strong coupling. p. 1 Here, we introduce an amplitudemediated transition from synchrony to partial incoherence that arises in experiments involving an
oscillatory, continuous medium with strong global coupling and weak diffusive coupling. The
experimental system transitions from a bimodal-amplitude solution with a homogeneous dominant
frequency [20] to a solution with one locked frequency, and many drifting dominant frequencies. The
experimental system transitions from a bimodal-amplitude solution with a homogeneous dominant
frequency [20] to a solution with one locked frequency, and many drifting dominant frequencies. We elucidate the mechanism of the transition using a system of globally coupled heterogeneous
Stuart–Landau oscillators. Here, we introduce an amplitudemediated transition from synchrony to partial incoherence that arises in experiments involving an
oscillatory, continuous medium with strong global coupling and weak diffusive coupling. The
experimental system transitions from a bimodal-amplitude solution with a homogeneous dominant
frequency [20] to a solution with one locked frequency, and many drifting dominant frequencies.Where the paper says it
Where the paper says it
Where the paper says it
Experimental Setup Details
The experimental setup comprises an electrochemical cell, an illumination system, and an ellipsomicroscope for surface imaging (EMSI) device. Working electrodes are single-crystalline n-type Si(111) wafers cut into 7 × 7 mm2 square samples. p. 1 Consequently, the
local dissolution dynamics evolves, mediating both electronic and chemical coupling across the
electrode surface. For n-type silicon electrodes, the resulting oxide patterns can be systematically
manipulated through variation of the photoexcitation intensity. In chapter 4, we introduce the experimental setup and define all the
mathematical concepts used in the results chapter. 2 Results
Eletrochemical Dissolution of Illuminated n-Type Silicon Figure 1 shows the evolution of the
system states, labeled (a)–(c), observed during the stepwise decrease of the illumination intensity at
3. The results are presented in Fig. 4, where three distinct dynamical regimes, controlled experimentally
by I and numerically by K, are shown.Where the paper says it
Where the paper says it
Where the paper says it
Numerical Integration Methodology
Equation (1) was numerically solved using the packages SciML/OrdinaryDiffEq [30] in Julia [31]. The intrinsic frequencies were drawn using a MersenneTwister [33] seed 1234 and symmetrized about µ = 0. p. 4 Repulsive coupling can be introduced by
a suitable choice of parameters. The intrinsic frequencies ωk are drawn from a Gaussian distribution
with mean µ and variance σ
2
. Starting with the FFT of |W(t)|, one new frequency ωH appears
for the low-amplitude cluster, which corresponds to the Hopf frequency. In the FFT spectrum of
Re(W(t)), the blue spectrum still shows only one peak, Ω
lock, whereas the low-amplitude cluster
displays two peaks: the initial locked frequency Ω
lock and the side-band frequency ωsb.Where the paper says it
Where the paper says it
Frequency Analysis in the Rotating Frame
The rotating-frame representation predicts that the amplitude defect reduces the mean angular frequency by exactly the Hopf frequency. The rotating-frame representation shows that before an amplitude defect emerges, qk = 0 and hence omegak = omegalock. p. 6 After the clockwise winding
transition, qk = −1, yielding Ωk = Ωlock − ωH,k. The rotating-frame representation predicts that the amplitude defect reduces the mean angular
frequency by exactly the Hopf frequency. (3)
Before the amplitude defect emerges, qk = 0 and hence Ωk = Ωlock. After the clockwise winding
transition, qk = −1, yielding Ωk = Ωlock − ωH,k.Where the paper says it
Where the paper says it
Frequency Spectrum Analysis
The FFT analysis reveals that in the experimental results at I = 0.94mW/cm2, ωsb = omegalock − ωH is satisfied. p. 8 94 mW/cm2
, K = 0. 955, and we labelled the
mean locked frequency with Ω, the Hopf frequency with ωH and the sideband peak by ωsb. We plot the
trajectories of the oscillator’s complex amplitude Wf in the comoving frame Ω for three Hopf periods
TH. Additionally, we plot the time series of the comoving phase ψ and indicate the winding number
q. Comparing this to the spectrum in the EMSI signal, we keep the dominant
peak at Ω
lock and identify a novel peak at ωsb. This novel peak lies very close to |Ω
lock − ωH|.Where the paper says it
Where the paper says it
Where the paper says it
Conclusion on Transition
The amplitude-mediated transition transforms the initially frequency-coherent state into a partially frequency-locked state. The low-amplitude oscillators acquire different mean frequencies that depend on their intrinsic frequencies omegalock − ωk. p. 9 5(b)
for K = 0. The high-amplitude oscillators remain locked on the horizontal branch Ωk =
Ω
lock, while the low-amplitude oscillators acquire distinct mean frequencies that depend on their
intrinsic frequencies Ω
lock − ωk. dark-blue and orange oscillators illustrate the first and last such transitions, respectively. After
these successive defects, the high-amplitude oscillators remain frequency locked, whereas the
low-amplitude group exhibits a broad distribution of mean frequencies. Because the low-amplitude oscillators undergo these transitions
successively and possess different modulation frequencies, they acquire different mean frequencies,
whereas the high-amplitude oscillators remain locked at Ω
lock. The amplitude defects transform the
initially frequency-coherent state into a partially frequency-locked state.Where the paper says it
Where the paper says it
Where the paper says it
Supplementary Information on Stability
The first Hopf bifurcation occurs at K = KHB, where the participation ratio is PR = 1.000194. This demonstrates that the observed instability is not a collective Hopf bifurcation of the entire locked population. p. 4 These modulations introduce secondary frequencies, but
initially leave the common mean frequency unchanged. To verify that these Hopf bifurcations are
oscillator-specific rather than collective instabilities of the entire locked population, we computed
the linear stability of the locked state in the frame rotating with Ω (see Supplementary Section S1 for
details on the stability analysis and mode localization). The associated critical eigenmode is
strongly localized (defined using the participation ratio PR introduced in Ref. [22]) on the oscillator
undergoing the transition.Where the paper says it
Where the paper says it
Supplementary Information on Amplitude Defect
To determine the Hopf-induced amplitude modulation, the authors fit the time evolution of A(t) with a harmonic fit. The first term represents the rotation at frequency omega, while other terms are additional small oscillations due to the Hopf bifurcation at frequencies omega ± ωH. p. 4 At K = 1, the population separates into high- and low-amplitude groups, while all oscillators
share the same frequency Ω. Upon decreasing K, the first low-amplitude oscillator develops an
amplitude modulation at KHB, consistent with a Hopf bifurcation. This observation indicates a close spatial correspondence between regions of high modulation
frequency and the low-frequency domains observed in state (c). Coupled Amplitude-Oscillator Model To investigate the mechanism underlying the experimentally observed separation into distinct dominant frequencies, we introduce a description in terms
4 Amplitude-Defect Mediated Transition to Partial Incoherence – From Experiment to Theory
of globally coupled heterogeneous Stuart–Landau oscillators. This system of ordinary differential
equations corresponds to the spatially uncoupled limit of the heterogeneous complex Ginzburg–
Landau model previously used to describe the electrochemical system. At the end of the section, we identify a novel, amplitudemediated transition into partial incoherence. In section 3, we discuss the introduced mechanism
by distinguishing it from the well-known phase-only model, comparing it to previous works, and
generalizing its applicability. For n-type silicon electrodes, the resulting oxide patterns can be systematically
manipulated through variation of the photoexcitation intensity. Here, we introduce an amplitudemediated transition from synchrony to partial incoherence that arises in experiments involving an
oscillatory, continuous medium with strong global coupling and weak diffusive coupling.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Amplitude dynamics modeling allows AI systems to predict transitions from complete frequency coherence to partial incoherence, a phenomenon phase-only models cannot capture. This enables AI to identify mechanisms that lead to frequency dispersion in heterogeneous oscillator populations.
-
The incorporation of amplitude defects into dynamical systems provides a pathway for AI to understand how localized events trigger changes in mean frequency. This capability allows AI to model the conversion of secondary frequencies into new, oscillator-specific mean frequencies as observed in electrochemical silicon etching.
-
An improved AI system can analyze experimental signals, such as those from ellipsomicroscopy, by extracting both amplitude and phase information simultaneously. This dual representation enables the system to distinguish between frequency locking and drifting states based on amplitude modulation characteristics.
-
The AI can use the Stuart-Landau model framework to investigate collective dynamics beyond phase approximations, even when coupling strength is large. This allows the system to predict complex dynamical behaviors, including multistability and quasiperiodic states, which are inaccessible through simpler models.
-
The system can be trained to recognize experimental conditions that lead to specific frequency shifts in the Fourier spectrum, such as identifying the sideband frequency omega sb = |Omega lock - omega H|. This provides a predictive tool for analyzing local deviations in experimental measurements.
Abstract
Phase-only models have contributed significantly to the understanding of synchronization. However, they do not account for dynamical scenarios where amplitude dynamics matter. This study identifies an amplitude-mediated transition from complete frequency coherence to partial incoherence, observed both in an electrochemical silicon-etching experiment and within a population of globally coupled heterogeneous Stuart-Landau oscillators. Under strong global coupling, the oscillators self-organize into a bimodal-amplitude distribution, from which the transition to partial incoherence is triggered by successive secondary Hopf bifurcations in low-amplitude oscillators. When these modulations cause oscillators to experience momentary vanishing amplitudes, the winding number changes, converting the secondary frequency into a new, oscillator-specific mean frequency. This mechanism results in a partially incoherent state, in which one amplitude group maintains frequency locking while another develops a dispersed frequency branch. These findings demonstrate that phase singularities offer a pathway to incoherence that phase-only models cannot
Related papers
- Periodic orbits underlying optical turbulence in the Lugiato-Lefever equation
- Rate-selective synchronization in switching networks: when timing meets structure
- Thouless Pumping of One-Dimensional Dark Solitons and Domain Walls
- Curvature and confinement: robustness of dryland vegetation patterns on sloped, undulating terrain
- Phenotype-structured nonlocal aggregation models I: signal production and response
- Dark solitons in the fractional NLS equation