Foliated and Mather-Jacobian discrepancies via tangential arcs
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Mathematics. The day in mathematics: new theorems, new proofs, and what they open.
Ada: We're looking at the paper: "Foliated and Mather-Jacobian discrepancies via tangential arcs".
Emmy: Here's the gist of the paper. This article develops a tangential arc-space approach to foliated discrepancies for logarithmic simple co-rank one foliations on threefolds, relative to a fixed invariant normal crossing separatrix divisor.
Ada: The core development establishes that in the non-resonant logarithmic case, reduced tangential arcs centered on the prescribed tangential locus are confined to this divisor.
Emmy: Foliated adjunction is employed to transfer the discrepancy calculus from the foliated setting to ordinary log pairs derived from adjunction on normalized branches and conductors.
Ada: This procedure yields a "tangential Ein–Musta¸ta–Yasuda type formula" for adapted toroidal tangential divisorial cylinders, demonstrating that the tangential discrepancy aligns with the usual foliated discrepancy of the foliated Minimal Model Program (MMP) when applied to adapted toroidal invariant divisors read on normalized branches.
Paper summary: Ada: So wrapping up this discussion on "Foliated and Mather-Jacobian discrepancies via tangential arcs", the authors have essentially shown that a specific approach—the tangential arc-space method—can capture the behavior of foliated discrepancies for logarithmic simple co-rank one foliations.
Emmy: They achieved this by using foliated adjunction to transfer the problem to ordinary log pairs, and then applying an arc-space theorem from Ein–Musta¸ta–Yasuda on those derived strata. This led them to that key formula relating tangential codimension to the tangential discrepancy.
Kolya: What does that actually mean for the broader field? It’s about finding a precise way to track singularity defects in these settings, especially when you are dealing with those fixed invariant separatrix divisors.
Ada: Right. And they provide a branch–conductor description for the tangential non-lc and non-klt loci, which is really useful for understanding where things go wrong in the minimal model program for these foliations.
Emmy: The title itself hints at this, focusing on how these discrepancies can be viewed through the lens of tangential arcs and Mather–Jacobian invariants. It's a unification effort between different geometric perspectives.
Kolya: If you only listen to the results, it's that for adapted toroidal invariant divisors read on normalized branches, the tangential discrepancy matches the usual foliated discrepancy of the foliated MMP. That’s a solid anchor point for comparison.
Ada: Exactly. The final statement they reach is that this leads to "tmldMJ equals tmldtor" when applied to the right data, which is their definitive branch–conductor description of tangential discrepancies.
Emmy: It’s a way of organizing these complex geometric objects into a neat system involving branches and conductors, proving lower semicontinuity for the minimal log discrepancy in this specific toroidal sector.
Kolya: So what we have here is a refined way to measure how singularities evolve in these foliated settings by using this tangential structure. It’s about moving beyond the standard tools when you need finer control over the geometry.
Conclusion: Ada: So we're wrapping up our look at this paper, "Foliated and Mather-Jacobian discrepancies via tangential arcs." The authors are looking at how to measure these discrepancies in a very specific way using these tangential arcs.
Emmy: It seems like they’re trying to bridge the gap between the foliated setting and something more classical, like those ordinary log pairs we work with.
Kolya: And what they're doing is building this new machinery to track singularities on these surfaces using a branch-conductor system.
Ada: The main thrust is showing that this tangential approach actually lines up with the traditional foliated Minimal Model Program when you look at the right kind of data.
Emmy: They've developed a whole new way to describe where the "bad" points are, not just as abstract sets, but using these normalized branch-conductor systems.
Kolya: I think what they’re really saying is that this method gives us a concrete way to see the geometry of these singularities that we couldn't see before.
Ada: It sounds like they've found a definitive description for how the tangential discrepancies behave in these specific cases.
Emmy: And their final result, equating the tangential Mather-Jacobian discrepancy with something called tmldtor, seems to be a really solid way to put it all together.
Kolya: It’s important because this gives us a tool we can use when we're dealing with those fixed invariant separatrix systems in the Minimal Model Program for foliations.
Ada: Exactly. It provides a more precise way to handle those singularities that are invisible to the standard methods.
Emmy: So, it moves us closer to understanding these complex foliated structures from a more constructive standpoint.
Kolya: But we still have to figure out how this new machinery scales and what kind of data we need for it to work reliably in practice.
math.AG, math.CV, math.DS
Submitted: 2026-07-02
Updated: 2026-11-05
Comments: 27 pages, major revision with improved results
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 82/100
The gist: This article develops a tangential arc-space approach to foliated discrepancies for logarithmic simple co-rank one foliations on threefolds…
Key concepts
- Tangential Arc-Space Approach
- This is a mathematical method used to study geometric objects by focusing on 'tangential arcs'—paths or curves that are tangent to a specific locus. The paper uses this specialized space to analyze how discrepancies behave within the foliated structure, providing a refined way to look at the geometry compared to traditional methods.
- Foliated Adjunction
- This technique is used to move discrepancy calculations from the complex setting of foliations into simpler settings involving ordinary log pairs. It works by analyzing normalized branches and conductors derived from adjunction on these structures, effectively translating the difficult foliated problem into a more manageable algebraic one.
- Mather-Jacobian Refinement
- This is an advanced tool used to relate the 'tangential' discrepancy to the standard Mather-Jacobian discrepancy of an algebraic stratum. It helps detect specific singularity defects that are missed by simpler methods, providing a finer analysis of how singularities manifest in the tangential setting.
- Normalized Branch-Conductor System
- This is a constructed system used to describe irreducible tangential cylinders. The theory proves that every such cylinder can be represented either on a unique normalized branch or on a unique normalized conductor stratum after applying an allowed refinement, providing a complete description of the geometry.
Terminology
Summary
This article develops a tangential arc-space approach to foliated discrepancies for logarithmic simple co-rank one foliations on threefolds, relative to a fixed invariant normal crossing separatrix divisor. p. 0 FOLIATED AND MATHER–JACOBIAN DISCREPANCIES VIA TANGENTIAL ARCS
MAURÍCIO CORRÊA
ABSTRACT. This article develops a tangential arc-space approach to foliated discrepancies for logarithmic simple co-rank one foliations on threefolds, relative to a fixed invariant normal crossing
separatrix divisor. This article develops a tangential arc-space approach to foliated discrepancies for logarithmic simple co-rank one foliations on threefolds, relative to a fixed invariant normal crossing
separatrix divisor. In the non-resonant logarithmic case, reduced tangential arcs centred on the prescribed tangential locus are confined to this divisor. The tangential sector is therefore presented, at
the reduced arc level, by the normalised separatrix–conductor system. Foliated adjunction transfers
the discrepancy calculus to ordinary log pairs obtained by adjunction on the normalised branches
and conductors. For toroidal invariant divisors read on
branches, this tangential discrepancy agrees with the usual foliated discrepancy. The resulting theory
gives toroidal tangential inversion of adjunction, a branch–conductor description of the tangential
non-lc and non-klt loci, a cylinder criterion for tangential log canonicity, lower semicontinuity of
the toroidal tangential minimal log discrepancy, and a relative Mather–Jacobian refinement for the
canonical image separatrix system.Where the paper says it
Where the paper says it
Where the paper says it
tangential Ein–Musta¸ta–Yasuda type formula
for adapted toroidal tangential divisorial cylinders, demonstrating that the tangential discrepancy aligns with the usual foliated discrepancy of the foliated Minimal Model Program (MMP) when applied to adapted toroidal invariant divisors read on normalized branches. Furthermore, the theory provides a branch–conductor description for the tangential non-lc and non-klt loci, establishes a cylinder criterion for tangential log canonicity, proves lower semicontinuity for the toroidal tangential minimal log discrepancy, and introduces a relative Mather–Jacobian refinement specifically tailored for the canonical image separatrix system. p. 0Where the paper says it
The main results include Theorem 1. p. 1 These two phenomena explain the use of non-resonance and reduced infinite arcs in
the main representability theorem. Main results. Let Σtan be a tangential centre on an object W of Adm(X, F, ∆; W0). The reduced
tangential sector centred at Σtan is presented, at the reduced arc level, by the ordinary arc spaces
of the normalised separatrix–conductor system.Where the paper says it
Where the paper says it
Jtan infinity (W, G; sigma tan) red = J infinity(D inv; sigma tan) red.
The theory introduces the adapted toroidal category and constructs a normalized branch–conductor system, proving that every irreducible tangential cylinder is represented either on a unique normalized branch or on a unique normalized conductor stratum after an allowed adapted toroidal refinement. A key derived formula is lcodim tanN tan q(E) = q atan(E; X, F, delta).
The Mather–Jacobian component relates the tangential discrepancy to the ordinary Mather–Jacobian discrepancy of the fixed algebraic separatrix stratum on X: a tan MJ(E; X, F, delta) = aMJ (F; VX, bVX),
where VX is the fixed algebraic stratum. In certain ranges, this comparison shows that a tan MJ(E; X, F, delta) = atan(E; X, F, delta).
The paper concludes by claiming the tangential branch–conductor formula
as the definitive branch–conductor description. Local computations illustrate that ordinary codimension is not a birational invariant in the tangential branch sector: lcodim(S x, theta x) (C m,n) = (1 − a)n,
and the Mather–Jacobian refinement successfully detects singularity defects that are invisible to the ordinary adapted toroidal tangential discrepancy. Finally, comparison with foliated MMP shows that for adapted toroidal invariant divisors whose data are read on normalized invariant branches, atan(E; X, F, delta) = AF (E; X, F, delta),
leading to the final result that tmldMJ = tmldtor
for the adapted toroidal data to which both sides apply.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system can perform tangential Mather-Jacobian discrepancy calculations by identifying them with ordinary Mather-Jacobian discrepancies on fixed algebraic strata VX over X, which are independent of the adapted toroidal model used for computation.
-
Improved AI system can determine if a pair (X, F, Delta) is tangentially log canonical along a closed tangent set Y by checking if
every normalised branch and conductor pair (V, BV) is log canonical along YV.
-
Improved AI system can compute the tangential logarithmic codimension of an adapted toroidal divisorial datum E by using the formula lcodimtan Ntan q(E) equals q atan(E; X, F, Delta).
-
Improved AI system can verify that tangentially toroidal data is independent of the chosen adapted model and branch–conductor presentation by leveraging the common adapted toroidal refinement theorem.
-
Improved AI system can establish if an object is Du Bois near the inverse image of a tangent set Y by checking if
every branch pair is Mather-Jacobian log canonical near Y
under Assumption 16.15 and Du Bois gluing hypotheses.
Abstract
We express the log discrepancies of co-rank one foliations on normal varieties in terms of arc codimensions and differential orders. On smooth threefolds, if a foliation has simple singularities and its separatrices form an algebraic simple normal crossings divisor, we identify its foliated discrepancies with those of an ordinary pair for every divisor centred on the separatrices. This gives adjunction and log canonical threshold formulae. For algebraic images of the separatrices, we estimate changes in boundary orders caused by failure of ideal generation and by descent through the conductor. For locally complete intersection images, comparison on a common resolution yields criteria for equality of discrepancies and bounds on log canonical thresholds.
Sources
- On the Resolutions of Non-Dicritical Foliations
- On the MMP for rank one foliations on threefolds
- Singularities with respect to Mather-Jacobian discrepancies
Related papers
- K-unstable Toric Varieties and Secondary Polytopes
- The commuting scheme of g 2 and a degree formula for commuting schemes
- Stacky geometry and logarithmic topology of transversely affine foliations
- Monodromy and vanishing cycles for complete intersection curves
- Characteristic cycles and Gevrey irregularity in hypergeometric families
- Tautological classes on KSBA spaces