Controlling Waiting Time Statistics in Monitored Collective Spins: Mitigating Detector's Resolution Barrier in Measurement-Induced Phase Transitions
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Controlling Waiting Time Statistics in Monitored Collective Spins".
Mira: Here's the gist of the paper. In collective dissipative spin systems, initial-state inhomogeneities can control waiting-time statistics between quantum jumps to mitigate detector resolution barriers.
Kai: The Problem Addressed The paper investigates how initial-state inhomogeneities can control waiting-time statistics between quantum jumps, thereby mitigating the detector-resolution problem.
Mira: The finite temporal resolution of detectors forces a coarse-graining of quantum trajectories, degrading pure-state evolution into a mixed-state description when the detector resolution time ∆τ becomes comparable to the average waiting time between emission events W.
Kai: This unavoidable coarse-graining obscures the fine-grained entanglement correlations needed to identify measurement-induced phase transitions.
Title and authors: Kai: So we're looking at this paper called Controlling Waiting Time Statistics in Monitored Collective Spins: Mitigating Detector's Resolution Barrier in Measurement-Induced Phase Transitions. Mira, what’s the main takeaway from just reading the title?
Mira: The title suggests they are tackling two big problems at once, which is pretty interesting. They are dealing with how long it takes for a quantum jump to happen and how that relates to the resolution of our detectors. It sounds like they're trying to find a way around a bottleneck in observing these complex quantum dynamics.
Lev: From an engineering standpoint, if we can control the waiting time, we might be able to see things that are normally washed out by the detector limitations. But controlling waiting time in these kinds of systems is usually tough because it depends on the environment and how fast things are decaying.
Kai: Exactly. And they introduce this idea of initial-state inhomogeneity, which is a way to engineer those waiting times. It’s not just about the system itself but how we set it up before we even start measuring anything.
Mira: Right, and the authors are Tanbir Islam and Fernando Iemini from the Instituto de Física at the University of Federal Fluminense. They bring a solid condensed matter background, which is great for pinning down those assumptions about what's actually happening in these collective spin systems.
Lev: For us researchers building hardware, we’re interested in how much overhead this takes. If they need a really specific initial state preparation to get that waiting time control, the complexity of that preparation has to be manageable for real hardware setups.
The paper's summary: Kai: So what’s the paper actually saying about the setup? Basically, it explores how initial-state inhomogeneities can control the waiting time between quantum jumps, which is supposed to solve a problem where detector resolution limits our ability to see the full picture.
Mira: That’s right. The core issue is that detectors have a finite time resolution, and if that resolution is comparable to the average waiting time between these events, it messes up the pure-state evolution and turns it into something mixed. This blurs out the subtle entanglement signals we are looking for when trying to spot measurement induced phase transitions.
Lev: So they’re proposing a way to make those jumps happen less frequently, or at least more predictably, by changing how the system starts off. That sounds like engineering the input conditions rather than just hoping for a certain outcome during the experiment.
Kai: Precisely. They partition the ensemble into two subsystems and rotate them by an angle theta to create this controlled inhomogeneity. This specific protocol is what they use to suppress the collective decay rate and increase that waiting time between quantum jumps, which pushes us into a regime where the detector resolution is larger than the waiting time.
Mira: And they show that in a very specific limit, when theta equals pi, meaning the anti-aligned case, this waiting time becomes finite and doesn't depend on how big the system gets. That’s quite a strong result for resolving that barrier completely.
Lev: That independence from system size is what makes it attractive for scaling up simulations or experiments because you don't have to worry about the waiting time just vanishing as the number of spins goes up. But I want to know, what is the actual cost of achieving that anti-aligned state preparation?
The paper's improvements: Kai: They really highlight two main improvements here. First, they show that even with these inhomogeneities present, the measurement induced phase transition still survives. This means we don't lose the physics we are trying to study just because we added this initial-state engineering.
Mira: That’s important because if the phase transition disappears under these conditions, then it’s just a trick to hide something instead of actually solving the problem. But they also show that the entanglement scaling changes depending on where you are in terms of inhomogeneity.
Lev: The change in entanglement scaling is a big one for us regarding postselection overhead. They note that while the measurement-induced phase transition stays visible, the time it takes for entanglement to saturate becomes significantly longer when inhomogeneities are present. That means we might still be stuck with a postselection problem, just in a different way.
Kai: It’s a trade-off they point out: controlling waiting time helps with detector resolution, but it makes the entanglement saturation time much longer, which partially brings back that postselection barrier they were trying to avoid. So we have to choose where we want the main experimental challenge to be.
Mira: Their analysis of the steady state entanglement entropy is interesting too. They find a sub-logarithmic scaling for higher couplings in the region where they are looking, which is different from what you might expect in simpler models. That’s a specific scaling behavior that needs careful checking against the underlying assumptions of their model.
Lev: From an error correction perspective, if the saturation time grows much longer, it means our required resources for postselection or tracking trajectories are climbing much faster than we thought. We need to know if this longer time is polynomial or exponential in system size for real hardware constraints.
Conclusion: Kai: So to wrap up on this paper, the main idea is that initial-state inhomogeneities let us engineer highly entangled steady states, and they can help mitigate the detector resolution issue by controlling the waiting time between jumps. But it comes with a cost in terms of postselection overhead because saturation time gets longer.
Mira: Yeah, so we’ve got this fundamental trade-off here between detector resolution and postselection overhead. It shows that initial state engineering is an intriguing way to generate large-scale entanglement in dissipative systems without relying on the usual dark state engineering methods.
Lev: For me, the key point is that while they solve the waiting time problem under anti-aligned conditions, we still have to worry about how long it takes for entanglement to fully saturate before we can get a stable measurement. That saturation time scaling is what really determines if this method is practical for large systems.
Kai: So in summary, controlling waiting time statistics in monitored collective spins with initial-state inhomogeneities offers a way to manage detector resolution by engineering the environment, but you trade that for a longer saturation time when you look at entanglement.
Mira: It’s an interesting path forward for experimental physics because it shows how we can use preparation techniques to control the dynamics of dissipative systems in ways that weren't immediately obvious.
Lev: Yeah, I think this paper points us toward looking at initial state engineering as a viable way to generate large-scale entanglement in these kinds of models without relying on dark state engineering.
Tanbir Islam, Fernando Iemini
Instituto de FĿcia, Universidade Federal Fluminense
quant-ph, cond-mat.other, cond-mat.stat-mech
Submitted: 2026-07-01
Updated: 2026-11-05
Comments: 14 pages, 10 figures
License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
Importance score: 75/100
The gist: In collective dissipative spin systems, initial-state inhomogeneities can control waiting-time statistics between quantum jumps to mitigate detector resolution barriers.
Key concepts
- Detector Resolution Barrier
- This problem arises because detectors have finite temporal resolution ($\Delta\tau$), meaning they cannot distinguish between very closely spaced quantum jumps. This forces the system to be described by a mixed state, obscuring fine details of the quantum trajectory needed to see measurement-induced phase transitions.
- Waiting Time Statistics
- This refers to the average time between successive quantum jumps in a monitored spin system. The paper shows that engineering initial inhomogeneities can control this waiting time. By increasing it, researchers can push the dynamics into a regime where the detector resolution is smaller than the waiting time ($\Delta\tau \gtrsim W$), allowing individual jumps to be resolved.
- Initial-State Inhomogeneity ($\theta$)
- This is created by partitioning the ensemble into two subsystems and rotating them relative to each other by an angle $\theta$. This rotation introduces a controllable degree of inhomogeneity. This control parameter is used to suppress the collective decay rate and tune the waiting time statistics, directly impacting how well measurement effects can be observed.
- Entanglement Saturation Time
- This is the timescale over which entanglement in the system reaches its steady state. The study reveals a trade-off: while inhomogeneities help resolve detector issues, they significantly lengthen this saturation time compared to homogeneous systems, partially reintroducing a postselection overhead.
Terminology
Summary
In collective dissipative spin systems, initial-state inhomogeneities can control waiting-time statistics between quantum jumps to mitigate detector resolution barriers. p. 0
The Problem Addressed
The paper investigates how initial-state inhomogeneities can control waiting-time statistics between quantum jumps, thereby mitigating the detector-resolution problem. The finite temporal resolution of detectors forces a coarse-graining of quantum trajectories, degrading pure-state evolution into a mixed-state description when the detector resolution time ∆τ becomes comparable to the average waiting time between emission events W. p. 0 This unavoidable coarse-graining obscures the fine-grained entanglement correlations needed to identify measurement-induced phase transitions. p. 1
Mitigation Strategy via Inhomogeneity
The authors propose engineering the initial state by partitioning the ensemble into two subsystems rotated by an angle θ, which introduces a controllable degree of inhomogeneity. This protocol suppresses the collective decay rate and increases the waiting time between quantum jumps. p. 1 The analysis shows that in the anti-aligned limit θ = π, the waiting time remains finite and independent of system size, fully resolving the resolution barrier. p. 1
Waiting Time Statistics Analysis
The analytical bound derived from angular momentum conservation suggests that the average waiting time W(t) is controlled by the initial inhomogeneities. The bound shows that for intermediate angles 0 < θ < π, the waiting time still decays extensively with N, W ≳ O(1/N), but with a prefactor dependent on the initial state’s relative orientation. p. 5 In contrast, for the anti-aligned case θ = π, the bound simplifies to W ≳ 1/κ ∼ O(1), which remains finite and independent of system size. p. 5 Numerical simulations corroborate this finding, showing that homogeneous ensembles exhibit waiting times decaying as O(1/N) while intermediate angles maintain this decay with an increasing multiplicative factor toward the anti-aligned configuration. p. 5
Entanglement Dynamics and Trade-offs
The study examines how inhomogeneities affect entanglement dynamics, revealing a trade-off between detector resolution and postselection overhead. While the measurement-induced phase transition survives under inhomogeneities, the entanglement saturation time becomes significantly longer in the presence of inhomogeneities. p. 1 For intermediate times before saturation sets in, entanglement entropy grows logarithmically in time for all inhomogeneity angles θ. p. 6 The steady-state entanglement entropy follows a sub-logarithmic scaling S¯N/2 ∼ lnβθ (N/2) in the BTC region. p. 6
Conclusion and Implications
The work demonstrates that initial-state inhomogeneities can be exploited to engineer highly entangled steady states. While these inhomogeneities mitigate the detector-resolution issue by controlling waiting time, they introduce a cost by modifying the postselection-free character of the model through a slower growth in saturation time. p. 7 This highlights a fundamental trade-off between detector resolution and postselection overhead. p. 1 The results suggest that initial-state engineering offers an intriguing approach to generating large-scale entanglement in dissipative systems. p. 7
REFERENCES
arXiv:2607.01332v2 [quant-ph] 8 Jul 2026
--- Page 1 ---
Controlling Waiting Time Statistics in Monitored Collective Spins: Mitigating Detector’s Resolution Barrier in Measurement-Induced Phase Transitions Tanbir Islam1, ∗ and Fernando Iemini1 Instituto de F´ısica, Universidade Federal Fluminense, Av. Gal. Milton Tavares de Souza s/n, Gragoat´a, 24210-346 Niter´oi, Rio de Janeiro, Brazil (Dated: July 10, 2026) In collective dissipative spin systems, the postselection barrier can be partially mitigated; however, a further obstacle may be posed by the finite temporal resolution of detectors. p. 0 In this work, we investigate how initial-state inhomogeneities can control waiting-time statistics between quantum jumps, thereby mitigating the detector-resolution problem. p. 0 We consider a collectively monitored spin model with a boundary time-crystalline phase, introducing inhomogeneity by partitioning the ensemble into two subsystems rotated by an angle θ. p. 0 We find that the measurement-induced phase transition survives under inhomogeneities, with distinct entanglement scaling regimes. p. 0 The waiting time increases with θ, scaling as 1/N but with a prefactor strongly enhanced by orders of magnitude, and in the anti-aligned limit θ = π it remains finite, fully resolving the resolution barrier. p. 0 This mitigation, however, comes at a cost: the entanglement saturation time becomes significantly longer, partially reintroducing the postselection barrier. p. 0 Our results highlight a trade-off between detector resolution and postselection overhead, with direct implications for the experimental observation of measurement-induced phenomena. p. 0 I. INTRODUCTION The dynamics of a quantum many-body system under continuous observation can host a rich phenomenology, as external measurements can alter the dynamics in ways that are invisible at the level of the ensemble-averaged density matrix [1, 2]. p. 0 In quantum many-body systems, the interplay between coherent evolution and measurements can qualitatively reshape quantum correlations, inducing a transition that remains completely hidden at the level of the average density matrix [3, 4]. p. 0 Resolving the system’s evolution conditioned on specific measurement outcomes provides access to individual quantum trajectories. p. 0 This access is essential for computing observables that are non-linear in the conditional density matrix ˆρc, most notably the von Neumann entanglement entropy, S = −Tr(ˆρc ln ˆρc), and the purity, P = Tr(ˆρ 2c), which serve as trajectory-level diagnostics of measurement-induced phase transitions (MIPTs) [5–7]. p. 0 A large body of subsequent work has further explored measurement-induced phases in monitored quantum systems through the analysis of individual quantum trajectories across different settings [8–41]. p. 0 Despite intense theoretical activity, experimental studies of measurement-induced phase transitions [42, 43] are very limited and remain severely constrained by the postselection problem [2, 44, 45]. p. 0 The post-selection problem is a fundamental obstacle to observing monitored phases. p. 0 Characterizing observables or entanglement along a single quantum trajectory requires reproducing the same sequence of measurement outcomes multiple times. p. 0 However, since the number of possible trajectories grows exponentially with the number of recorded jump events, ∗ tanbir i@id. p. 0uff.br the probability of repeatedly realizing a given trajectory becomes exponentially small [2]. p. 0 More precisely, a trajectory can be represented as a binary string of jump events occurring up to the saturation time τsat, so that Psame ∝ 2−τsat. p. 0 In generic monitored many-body systems with local measurements, τsat grows extensively with system size, τsat ∼ O(N), making the post-selection overhead exponential in N and severely limiting experimental access to large systems [46]. p. 0 This barrier has limited experimental explorations of MIPTs to small systems and represents a fundamental obstacle to scaling up these studies [46]. p. 0 Recent efforts to address the post-selection barrier have followed different routes. p. 0 Some approaches aim to bypass direct trajectory post-selection by extracting trajectory-dependent information through classical post-processing, modified measurement schemes, feedback protocols, spacetime-duality constructions, or related circuit-based strategies [47–53]. p. 0 These methods can make nonlinear trajectory observables accessible in specific settings, but they do not reduce the post-selection cost in the same sense. p. 0 A more direct form of mitigation was identified in monitored infinite-range systems, where the entanglement dynamics saturates on a timescale that grows only logarithmically in N [2, 54, 55]. p. 0 In this case, the post-selection barrier is not removed, but the scaling of the required overhead can be reduced from exponential to polynomial in favorable regimes. p. 0 However, practical implementation still faces an intrinsic detector-resolution problem, where the finite time resolution of experimental devices forces a coarse-graining of quantum trajectories, degrading purestate evolution into a mixed-state description [54]. p. 0 This degradation is governed by the competition between the detector’s finite temporal resolution, ∆τ, and the characteristic waiting time between quantum jumps, W. p. 0 Usually, in collective systems W decreases with system size, arXiv:2607. p. 001332v2 [quant-ph] 8 Jul 2026
--- Page 2 ---
FIG. 1. Schematic of the detector-resolution problem and control protocol. p. 1 (Top panel) For a finite detector resolution ∆τ, multiple quantum jumps may occur within the same time bin, making distinct trajectories experimentally indistinguishable and leading to a mixed-state description. p. 1 (Bottom panel) The engineered initial-state protocol suppresses the jump rate, increasing the waiting time between events so that individual jumps remain resolvable within each bin pushing the dynamics into a regime where ∆τ ≳ W. p. 1 Consequently, multiple emission events occurring within a single detection bin become experimentally indistinguishable, as illustrated in Fig. p. 1 1. This unavoidable coarse-graining requires averaging over microscopically distinct trajectories, which degrades the purity of the conditional state and obscures the fine-grained entanglement correlations needed to identify measurementinduced phase transitions. p. 1 The detector resolution therefore acts as a critical bottleneck for observing trajectorydependent physics in large-scale quantum simulators. p. 1 In this work, we propose a mitigation of the detectorresolution limit by engineering the initial state of the system. p. 1 We consider a collectively monitored spin model that exhibits a boundary time-crystalline phase and a postselection-free character in the homogeneous limit. p. 1 By partitioning the ensemble into two subsystems rotated by an angle θ, we introduce a controllable degree of inhomogeneity. p. 1 We demonstrate that appropriate initialstate preparation can suppress the collective decay rate, increasing the waiting time between quantum jumps and thereby partially resolving the detector-resolution barrier. p. 1 Our analysis reveals a nuanced picture though. p. 1 While the waiting time increases significantly with the inhomogeneity angle, and in the extreme anti-aligned case it remains finite and independent of system size, thus fully resolving the detector-resolution problem, it comes at a cost: the entanglement saturation time, which in the homogeneous case grows only logarithmically with system size, becomes significantly longer in the presence of inhomogeneities, thereby partially reintroducing the postselection barrier. p. 1 Our results thus highlight a fundamental trade-off between detector resolution and postselection overhead, with direct implications for the experimental observation of measurement-induced phenomena. p. 1
--- Page 3 ---
FIG. 2. Mean-field phase diagram of the collective spin model as a function of the initial-state inhomogeneity angle θ. p. 2 The black curve shows the critical drive-to-dissipation ratio (ω0/κ)c below which the ensemble-averaged dynamics settles into a stationary phase (orange region), and above which it supports persistent oscillations in a boundary time-crystalline (BTC) phase (blue region) In the case of inhomogeneous initial states, which break global permutation symmetry and populate lower total-spin sectors, the phase transition of the model is shifted to smaller values of the drive-to-dissipation ratio, (ω0/κ)c < 1 [57]. p. 2 Considering a bi-partition of the full ensemble, rotated by an angle of θ from each other (as discussed in detail in Sec. p. 2III), we compute the phase diagram within a mean-field approximation for the average magnetisation - as shown in Fig. p. 2 2. The phase boundary is determined numerically by integrating the mean-field equations of motion till the long time regime and the corresponding standard deviations for each subensemble magnetization. p. 2 In the stationary phase both sub-ensembles magnetization relax to fixed points with vanishing standard deviations, while in the BTC phase there are persistent oscillations with large standard deviations. p. 2 As θ increases from 0 to π, the boundary of the BTC phase moves to progressively smaller drive-to-dissipation ratios, meaning that a weaker drive suffices to sustain persistent oscillations once the initial state is sufficiently inhomogeneous. p. 2
--- Page 4 ---
FIG. 3. Schematic representation of the inhomogeneous initial-state preparation. p. 4 The system is divided into two internally permutation-symmetric collective spin ensembles, A and B, each containing N/2 atoms - see Fig. p. 33 The ensembles are θ rotated from each other - as given by Eq. p. 4(15) - with this angle thus controlling the degree of inhomogeneity between them. p. 4 Since each subsystem remains internally permutation symmetric, the Hilbert space of each ensemble is spanned by Dicke states Jη, mη⟩, with η = A, B satisfying (Jˆη)2Jη, mη⟩ = Jη(Jη + 1)Jη, meta⟩ (10) Jˆeta zJeta, meta⟩ = m ηJeta, meta⟩ (11) with JA = JB = N/4, mη = −Jη, −Jη + 1,. p. 4.., Jη. (12) The full many-body state is then expanded in the tensor-product Dicke basis as ψ(t)⟩ = XJA mA=−JA XJB mB=−JB cmA,mB (t)JA, mA⟩⊗JB, mB⟩ (13) This representation reduces the effective Hilbert-space dimension from 2N to d = (2JA + 1)(2JB + 1) = N/2+1 while retaining the bipartite structure required to describe the inhomogeneous initial states. p. 4 The protocol begins with all spins in the fully polarized state along the z-axis, ↑⟩ = ↑⟩1 ⊗ · · · ⊗ ↑⟩N. p. 4 We then apply a rotation around the x-axis to the spins in subsystem B, as shown in Fig. p. 4 3: ψθ(t0)⟩ = exp(−iθJˆB x) ↑⟩, (15) The angle θ serves as a continuous control parameter for the relative orientation, and hence the inhomogeneity between them. p. 4
--- Page 5 ---
FIG. 4. Average waiting time W(t) versus system size N for different initialization angles θ. p. 5 For the anti-aligned case (θ = 180◦), collective decay is suppressed and W(t) remains finite of O(1), while for intermediate angles it shows a waiting time decreasing with N. p. 5 Inset: same plot in log-log scale, showing clearly an algebraic decay W(t) ∼ N−1 for the homogeneous and intermediate angle cases. p. 5
--- Page 6 ---
FIG. 5. Steady-state entanglement entropy for the inhomogeneous case θ = π/2, shown across the phase diagram. p. 6 Two distinct regimes are visible: for low couplings, the entanglement follows an area-law scaling, while for higher couplings a sub-logarithmic scaling emerges. p. 6 The dashed vertical line indicates the mean-field critical coupling obtained from magnetization observables. p. 6 In the anti-aligned configuration (θ = π), where the system remains in a BTC state for any finite coupling, we find a logarithmic growth of entanglement with system size across all parameters (see inset of Fig. p. 6 5). It is worth noting that such logarithmic scaling is observed at the critical transition in homogeneous systems [1], not strictly required in the inhomogeneous case. p. 6
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
System can control waiting time statistics between quantum jumps by engineering initial-state inhomogeneities, which mitigates detector resolution barrier by increasing waiting time between events.
-
The improved AI system can exploit initial-state inhomogeneities to suppress the collective decay rate and increase the waiting time between quantum jumps, pushing the dynamics into a regime where "Delta tau >= W" is resolved.
-
The AI system can maintain visibility of trajectory-level measurement-induced phenomena under realistic experimental constraints by preparing the system in an anti-aligned initial state where the waiting time remains finite and independent of system size.
-
The improved AI can engineer highly entangled steady states using initial-state inhomogeneities, offering an approach to generating large-scale entanglement in dissipative systems without relying on usual methods such as dark state engineering.
-
The AI system can dynamically adjust the trade-off between detector resolution and postselection overhead based on the inhomogeneity angle theta, allowing for optimization depending on the experimental context.
Sources
- Many-Body Open Quantum Systems
- Theory of free fermions dynamics under partial post-selected monitoring
- Probing post-measurement entanglement without post-selection
- Revealing measurement-induced phase transitions by pre-selection
- Measurement-induced phase transitions in monitored infinite-range interacting systems
- Monitored long-range interacting systems: spin-wave theory for quantum trajectories
Related papers
- Computational regimes in matrix-product-state-based quantum trajectory simulations
- Toward chemically accurate quantum simulations on quantum hardware: A quantum-HPC hybrid approach
- Transversal surface-code game with reconfigurable qubits
- Fulqrum: a generalized framework for quantum subspace diagonalization
- Flux-Activated Resonant Control of a Bosonic Quantum Memory
- Machine learning the effects of many quantum measurements