Bricker to BRACE: A Bracket Exposure RAW Dataset and Restoration Model for Flicker-Banding

arXiv:2606.29845 · cs.CV · Submitted 2026-06-29 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: AI Radio. Generated commentary on the latest Artificial Intelligence papers.

Tom: We're looking at the paper: "Bricker to BRACE".

Jane: Here's the gist of the paper. Flicker-banding (FB) removal aims to eliminate the diverse stripe artifacts that appear in screencaptured images, and is a challenging and practically important image restoration task <ref:2606.29845#pg2> This paper introduces Bricker, a synthetic–real bracketed RAW dataset built via ray-tracing-based physical simulation and automated multi-exposure capture tool, and BRACE, a multi-frame restoration model that utilizes frequency-aware banding prior and a multi-scale spatial cross-attention modulator for cross-exposure spatial fusion <ref:2606.29845#pg2> Dataset Construction The Bricker dataset consists of paired synthetic and real images with diverse display types, driving strategies, and capture conditions <ref:2606.29845#pg2> The synthetic dataset is constructed using a ray-tracing-based screen imaging simulation system that models the full physical imaging pipeline <ref:2606.29845#pg4> This simulation pipeline involves several stages, including Scene Construction, Ray Casting, Brightness Integration, Degradation, and Rev-ISP <ref:2606.29845#pg6> The degradation process involves integrating the temporal brightness received by each pixel over its exposure interval to produce a per-pixel brightness mask Mi for each frame <ref:2606.29845#pg8> Finally, simulated sensor noise is added to each I RAW i,clean, yielding the final degraded RAW frames I RAW i for all bracketed exposure settings <ref:2606.29845#pg8> Model Architecture and Priors The BRACE model proposes a spatial–temporal approach that fuses multi-frame spatial information to handle complex FB patterns <ref:2606.29845#pg4> It incorporates a Frequency-Aware Banding Prior (FABP) and a Multi-scale Spatial CrossAttention Modulator (MSCAM) for frequency-aware and spatial cross-exposure fusion <ref:2606.29845#pg4> The FABP analyzes the dominant spectral peak from the 2D discrete Fourier transform of the grayscale image to extract three banding descriptors for each frame, including stripe frequency fx i, stripe orientation fy i, and peak energy ratio fi <ref:2606.29845#pg8> The MSCAM pools each frame’s banding attributes into a compact global prior token z glob by projecting the mean and standard deviation of cross-frame statistics through an MLP <ref:2606.29845#pg8> This global prior is then injected into the feature maps via FiLM modulation parameters c = 1/3 X s∈

1,2,4: c(s),

γ, β: = MLP(c) <ref:2606.29845#pg8> Evaluation Metrics The Stripe Frequency Consistency (SFC) metric is introduced to quantitatively evaluate banding removal by measuring how well the predicted output reproduces the banding-direction energy structure of the ground truth <ref:2606.29845#pg8> SFC combines a direction-ratio loss Dratio and a gated radial-profile loss Dprofile, defined as SFC =

Dratio + λE · g ·Dprofile: ×100 <ref:2606.29845#pg8> The Dratio captures how well the directional energy concentration is preserved, while Dprofile measures the fidelity of the radial energy profile along the banding direction <ref:2606.29845#pg8> Performance and Findings Experiments demonstrate state-of-the-art performance on both synthetic and real benchmarks across restoration fidelity, perceptual quality, frequency consistency, and color accuracy <ref:2606.29845#pg2> BRACE achieves the best performance across all metrics on Bricker’s syn and real datasets <ref:2606.29845#pg10> The ablation study shows that MSCAM injects the extracted banding prior into spatial cross-frame fusion, improving DISTS/SFC by suppressing stripe residuals <ref:2606.29845#pg2> The model is first trained on the synthetic dataset to learn basic banding removal and then fine-tuned on the real dataset to adapt to more complex degradations in real-world captures <ref:2606.29845#pg8> The results show that BRACE removes banding artifacts while restoring color and texture details, including in challenging cases with strong banding and color shifts <ref:2606.29845#pg2> Limitations Several limitations remain open for future investigation, including handling extremely complex FB patterns such as severe compound-jagged coupling or extreme color distortions across large brightness ranges <ref:2606.29845#pg8> Device-Dependent Color Bias is another concern, as the reverse ISP pipeline is parameterized by device-specific whitebalance gains and color correction matrices <ref:2606.29845#pg8> Computational Cost and Real-Time Deployment require optimization for on-device deployment through model pruning or efficient attention mechanisms <ref:2606.29845#pg8> Broader Impacts Our FB restoration model brings clear societal benefits by enhancing image quality in both everyday photography and professional workflows <ref:2606.29845#pg8> It improves visual clarity under challenging conditions, producing more faithful and pleasing images with relatively low computational cost <ref:2606.29845#pg8> The work focuses primarily on the technical contribution of the model, and transparency about its capabilities is encouraged to prevent unintended harms <ref:2606.29845#pg8> Implementation Details The implementation details include using a batch size of 16 and randomly cropping input patches to 128 × 128 with random horizontal flipping and rotation <ref:2606.29845#pg8> The model is optimized with AdamW

19: <ref:2606.29845#pg8> In stage one, the learning rate is set to 1 × 10−4, and training runs for 50 epochs <ref:2606.29845#pg8> In stage two, the learning rate is lowered to 1 × 10−5, and fine-tuning runs for 20 epochs <ref:2606.29845#pg8> All experiments are conducted on an NVIDIA RTX A6000 GPU <ref:2606.29845#pg8> The comparison methods include Burstormer

11: , HDRFlow

41: , TMRNet

48: , and Flickerformer

31: <ref:2606.29845#pg8> The final restoration result is obtained by feeding the output features of the last frame through a reconstruction network <ref:2606.29845#pg8> The training proceeds in two stages, with Stage One using L1 loss and multilevel wavelet-based frequency loss LMWL <ref:2606.29845#pg8> and Stage Two incorporating a color correction loss MS-SWD <ref:2606.29845#pg8> The total loss for stage one is Lstage1 = LL1 + λwavelet · LMWL <ref:2606.29845#pg8> and the total loss for stage two is Lstage2 = Lstage1 + λcolor · LMSSWD <ref:2606.

Title and authors: Tom: So what’s the main idea here? Basically, they built this Bricker dataset, pairing synthetic images generated by a ray-tracing simulation with real images captured under various conditions.

Jane: The simulation models the whole physical imaging pipeline, from scene construction to the final sensor noise added to the RAW frames <ref:2606.29845#pg6>. This is much more realistic than what previous single-frame simulation methods could produce, which is a key point.

Lu: The simulation involves steps like ray casting and brightness integration over time, leading to a per-pixel brightness mask Mi for each frame <ref:2606.29845#pg8>. This lets them create those complex FB patterns that real captures have.

Meng: So the point is that their synthetic data isn't just a simple stripe; it captures the exposure-dependent stripe morphologies and diverse complex FB patterns we see in reality, which existing simulation methods couldn't match <ref:2606.29845#pg2>.

Lalam: And then they propose BRACE, which is a multi-frame restoration model that uses both a frequency aware banding prior and a spatial cross attention modulator to fuse the information across those different exposures <ref:2606.29845#pg4>.

Tom: That sounds like they’re using the fact that you have multiple views of the same scene to understand how the banding evolves, not just trying to fix one snapshot in isolation.

Jane: Exactly. They use this multi-frame spatial information to handle those complex FB patterns, which is what makes their approach different from older methods <ref:2606.29845#pg4>.

The paper's summary: Tom: Now let’s talk about how they actually make the model work better than what came before. They introduce two main things for their system: the Frequency Aware Banding Prior and the Multi-scale Spatial CrossAttention Modulator.

Lu: The Frequency Aware Banding Prior, or FABP, is interesting because it analyzes the 2D discrete Fourier transform of each grayscale image to pull out three specific banding descriptors for every frame <ref:2606.29845#pg8>.

Jane: So they extract stripe frequency fx i, stripe orientation fy i, and peak energy ratio fi, which gives them a way to measure the banding structure physically rather than just looking at pixels.

Meng: Then they pool all those frame-level attributes into a compact global prior token called z glob by projecting the mean and standard deviation of these statistics through a Multi-Layer Perceptron <ref:2606.29845#pg8>.

Tom: That’s like they’re summarizing the complex information from all exposures into one summary token before injecting it back into the main feature maps using FiLM modulation parameters <ref:2606.29845#pg8>.

Jane: And that injection method allows them to blend those frequency-aware details with the spatial information from other frames during fusion, which is what they call cross-exposure spatial fusion <ref:2606.29845#pg4>.

The paper's improvements: Tom: So, looking at the final results, BRACE shows state-of-the-art performance on both synthetic and real benchmarks across fidelity and quality metrics <ref:2606.29845#pg2>. They claim it beats the competition on everything measured.

Jane: It seems they did a great job restoring color and texture details even in really challenging cases where there’s strong banding or significant color shifts <ref:2606.29845#pg2>. The Stripe Frequency Consistency metric, SFC, shows how well the output keeps the directional energy structure of the ground truth <ref:2606.29845#pg8>.

Lu: The ablation study shows that incorporating this MSCAM into the spatial cross-frame fusion specifically helps improve those DISTS and SFC metrics by suppressing the stripe residuals <ref:2606.29845#pg2>. It confirms that fusing the prior this way is what makes it effective.

Meng: From a deployment standpoint, they trained it first on the synthetic data to learn the basic removal, and then fine-tuned it on real data to handle those messier, unpredictable degradations in actual captures <ref:2606.29845#pg8>. That two-stage training is smart for adapting to real world noise.

Lalam: The limitation they mention is handling extremely complex FB patterns, like severe compound jagged coupling or extreme color distortions across large brightness ranges <ref:2606.29845#pg8>. Also, they note device dependent color bias because the reverse ISP pipeline depends on specific device settings <ref:2606.29845#pg8>.

Tom: So, while it’s high performance, they aren't claiming a solution for every single weird artifact imaginable yet. But the core idea of using a multi-frame approach with frequency priors seems very solid for tackling these temporal aliasing issues <ref:2606.29845#pg1>.

Jane: It’s definitely a big step forward in moving beyond simpler single-frame models, giving us better tools for real image restoration in photography and professional workflows <ref:2606.29845#pg8>.

Lu: The future work would likely focus on making the model more robust to those extreme edge cases they flagged, or optimizing it computationally for faster, on-device use <ref:2606.29845#pg8>.

Meng: If you’re thinking about running this in production, you’d want to see how much computational cost it adds when you try to prune the model or use those attention mechanisms efficiently <ref:2606.29845#pg8>.

Lalam: The Bricker to BRACE paper shows a clear path for using physics-based simulation and multi-frame data to tackle complex image degradation, giving us a way to get better visual quality with relatively low computational cost <ref:2606.29845#pg8>.

Conclusion: Tom: So we just looked at the Bricker to BRACE paper, which is about building a synthetic real bracketed RAW dataset and a restoration model for flicker banding <ref:2606.29845#pg1>. It basically shows how you can use simulated data from ray tracing to train an AI that fixes those annoying stripes in photos.

Jane: Yeah, it’s really about taking the messy reality of multiple camera exposures and using a multi-frame AI model to clean up the image, which is something we all deal with in everyday photography <ref:2606.29845#pg8>.

Lu: The core idea they push here is using that synthetic data—the Bricker dataset—to teach the restoration model how those complex flicker patterns actually form physically, rather than just guessing the noise away <ref:2606.29845#pg2>.

Meng: From a production standpoint, it's interesting that they trained it first on their synthetic set to learn the basics and then fine-tuned it on real data for things like color shifts <ref:2606.29845#pg8>. That staged training sounds like a way to save time on real testing.

Lalam: I agree, and what I find most interesting is how they use that frequency aware banding prior, the FABP, to pull out specific descriptors like stripe orientation and energy ratio <ref:2606.29845#pg8>. That gives the AI a physical language to understand the stripes in.

Tom: A physical language is cool, but how does that translate into actual quality improvement? They use this Multi-scale Spatial CrossAttention Modulator, or MSCAM, to inject those learned priors back into the image fusion <ref:2606.29845#pg4>.

Jane: So they’re taking the summary of what all those exposures are saying and injecting it into the main processing pipeline to make sure the final result looks right spatially <ref:2606.29845#pg4>. It’s like giving the AI a cheat sheet based on what it learned across multiple views.

Lu: That injection method is key because it helps suppress those stripe residuals, which is what they measure with that Stripe Frequency Consistency metric, or SFC <ref:2606.29845#pg8>. It shows they’re measuring the directional energy preservation very carefully.

Meng: I wonder about the computational cost there. They use this complex attention mechanism for fusion, so if you want to deploy this on a small device, you'd definitely need to look at pruning or finding more efficient ways to compute that cross attention <ref:2606.29845#pg8>.

Tom: That’s a fair point about the cost. But for now, they report state-of-the-art performance on both synthetic and real benchmarks across fidelity and color accuracy <ref:2606.29845#pg2>. The results show it’s working well under those challenging conditions we talked about earlier.

Jane: It’s definitely a solid result for image restoration, especially since they handled color shifts too, which is often the hardest part of these things <ref:2606.29845#pg2>. The Bricker to BRACE paper gives us a concrete tool for tackling flicker banding in real-world captures.

Lu: It’s a useful framework for understanding how temporal information can be used to stabilize image quality across different exposures <ref:2606.29845#pg4>. It points toward using multi-frame spatial data as a standard representation learning technique for restoration tasks.

Lalam: I'm confident in the answer on this one. The Bricker to BRACE paper provides a strong foundation by bridging the gap between simulated physics and real image degradation for flicker banding removal <ref:2606.29845#pg1>.

Tom: Alright, so we’ve seen how they build a super realistic dataset and then train an AI to fix those stripes using frequency priors and cross attention. That should give us a good idea of what’s possible with multi-frame restoration <ref:2606.29845#pg1>.

Jane: It's a great demonstration of how understanding the underlying physics, even through simulation, can lead to better AI tools for people who just want clearer photos and videos <ref:2606.29845#pg8>.

Zihan Zhou, Libo Zhu, Jue Gong, Zhiyi Zhou, Jiezhang Cao, Yong Guo, ℒYulun Zhang

Shanghai Jiao Tong University

cs.CV

Submitted: 2026-06-29

Updated: 2026-11-04

Code: https://github.com/ZZH-qwq/BRACE

License: http://creativecommons.org/licenses/by-nc-sa/4.0/

Importance score: 89/100

The gist: Flicker-banding (FB) removal aims to eliminate the diverse stripe artifacts that appear in screencaptured images…

Key concepts

Bricker Dataset
This is a synthetic and real image collection designed for flicker-banding removal. The synthetic data is created using a detailed ray-tracing simulation that mimics the entire physical imaging process, including scene construction, ray casting, brightness integration over time, and sensor noise addition.
Frequency-Aware Banding Prior (FABP)
FABP analyzes each frame's grayscale image using a 2D discrete Fourier transform to identify three key banding characteristics: stripe frequency ($f_x$), stripe orientation ($f_y$), and peak energy ratio ($f_i$). This provides a physically meaningful way to describe the specific banding pattern present in an individual exposure.
Multi-scale Spatial CrossAttention Modulator (MSCAM)
MSCAM is a mechanism that helps the model fuse information across different frames spatially. It first calculates frame-level statistics and compresses them into a compact global prior token ($z_{glob}$). This token is then injected into the feature maps via FiLM modulation, guiding the cross-exposure fusion process to better handle complex banding patterns.

Terminology

Summary

Flicker-banding (FB) removal aims to eliminate the diverse stripe artifacts that appear in screencaptured images, and is a challenging and practically important image restoration task <ref:2606. p. 0

Where the paper says it

com/ZZH-qwq/BRACE. 1 Introduction Flicker-Banding (FB) removal aims to eliminate the diverse stripe artifacts that appear in screencaptured images, and is a challenging and practically important image restoration task [1].

29845#pg2> This paper introduces Bricker, a synthetic–real bracketed RAW dataset built via ray-tracing-based physical simulation and automated multi-exposure capture tool, and BRACE, a multi-frame restoration model that utilizes frequency-aware banding prior and a multi-scale spatial cross-attention modulator for cross-exposure spatial fusion <ref:2606. p. 0
Where the paper says it

We construct Bricker, a synthetic–real bracketed RAW dataset built via ray-tracing-based physical simulation and automated multi-exposure capture tool. We further propose BRACE: Bracketed RAW Flicker-Banding Removal, a multi-frame restoration model that utilizes frequency-aware banding prior and a multi-scale spatial cross-attention modulator (MSCAM) for cross-exposure spatial fusion.

29845#pg2>

Dataset Construction

The Bricker dataset consists of paired synthetic and real images with diverse display types, driving strategies, and capture conditions <ref:2606.29845#pg2> The synthetic dataset is constructed using a ray-tracing-based screen imaging simulation system that models the full physical imaging pipeline <ref:2606. p. 3

Where the paper says it

However, such methods cannot reproduce the unique characteristics of screen capture or the variation of FB patterns across bracketed exposures. To generate a synthetic dataset with diverse and physically faithful FB morphologies, we construct a ray-tracing-based screen imaging simulation system that models the full physical imaging pipeline.

29845#pg4> This simulation pipeline involves several stages, including Scene Construction, Ray Casting, Brightness Integration, Degradation, and Rev-ISP <ref:2606. p. 3
Where the paper says it

The simulation pipeline, illustrated in Fig. a, consists of the following stages: Scene Construction.

29845#pg6> The degradation process involves integrating the temporal brightness received by each pixel over its exposure interval to produce a per-pixel brightness mask Mi for each frame <ref:2606. p. 4
Where the paper says it

Brightness Integration. Using the screen’s refresh mechanism, we integrate the temporal brightness received by each pixel over its exposure interval, producing a per-pixel brightness mask Mi for each frame.

29845#pg8> Finally, simulated sensor noise is added to each I RAW i,clean, yielding the final degraded RAW frames I RAW i for all bracketed exposure settings <ref:2606. p. 4
Where the paper says it

Sensor Noise. Finally, simulated sensor noise is added to each I RAW i,clean, yielding the final degraded RAW frames I RAW i for all bracketed exposure settings.

29845#pg8>

Model Architecture and Priors

The BRACE model proposes a spatial–temporal approach that fuses multi-frame spatial information to handle complex FB patterns <ref:2606.29845#pg4> It incorporates a Frequency-Aware Banding Prior (FABP) and a Multi-scale Spatial CrossAttention Modulator (MSCAM) for frequency-aware and spatial cross-exposure fusion <ref:2606. p. 1

Where the paper says it

Based on this analysis, we develop a ray-tracing-based screen imaging simulator and an automated multi-exposure capture tool, with which we construct Bricker, a paired synthetic and real Bracket exposure flicker-banding dataset covering diverse display types, driving strategies, and capture conditions. We further propose BRACE for Bracketed RAW Flicker-Banding Removal, incorporating a Frequency-Aware Banding Prior (FABP) and a Multi-scale Spatial CrossAttention Modulator (MSCAM) for frequency-aware and spatial cross-exposure fusion.

29845#pg4> The FABP analyzes the dominant spectral peak from the 2D discrete Fourier transform of the grayscale image to extract three banding descriptors for each frame, including stripe frequency fx i, stripe orientation fy i, and peak energy ratio fi <ref:2606. p. 5
Where the paper says it

We locate the dominant spectral peak via argmax: (u ∗ i , v∗ i ) = arg maxu,v P˜ i,u,v. From this peak, we extract three banding descriptors for each frame: fx,i = v ∗ i − cv W , fy,i = u ∗ i − cu H , fi = q f 2 x,i + f 2 y,i, θi = atan2(fy,i, fx,i) + π 2 mod π, ρi = P˜ i,u∗ i ,v∗ P i u,v P˜ i,u,v = E peak i Etotal i , (5) where fi is the stripe frequency in cycles per pixel, θi ∈ [0, π) is the stripe orientation, and ρi is the peak energy ratio.

29845#pg8> The MSCAM pools each frame’s banding attributes into a compact global prior token z glob by projecting the mean and standard deviation of cross-frame statistics through an MLP <ref:2606. p. 6
Where the paper says it

2 Spatial Cross-Attention Fusion We pack each frame’s banding attributes into si ∈ R 8 , including frequency, direction, energy, energy ratio, and phase, and compute the ρi-weighted mean µ and standard deviation σ. These cross-frame statistics are projected through an MLP into a compact global prior token: z glob = MLP[µ;σ] ∈ R d , d = 64.

29845#pg8> This global prior is then injected into the feature maps via FiLM modulation parameters c = 1/3 X s∈[1,2,4] c(s), [γ, β] = MLP(c) <ref:2606. p. 6
Where the paper says it

We then apply scaled dot-product cross-attention with the reference frame serving as the query and all frames as keys and values: c (s) = AttentionQ = t (s) 3 , K = {t (s) i } T i=1, V = {t (s) i } T i=1 , (11) which learns the importance of each frame relative to the reference, conditioned on the banding prior. The resulting multi-scale contexts are then mapped by an MLP to FiLM [29] modulation parameters: c = 1 3 X s∈{1,2,4} c (s) , [γ, β] = MLP(c) ∈ R 2C .

29845#pg8>

Evaluation Metrics

The Stripe Frequency Consistency (SFC) metric is introduced to quantitatively evaluate banding removal by measuring how well the predicted output reproduces the banding-direction energy structure of the ground truth <ref:2606.29845#pg8> SFC combines a direction-ratio loss Dratio and a gated radial-profile loss Dprofile, defined as SFC = [Dratio + λE · g ·Dprofile]×100 <ref:2606. p. 6

Where the paper says it

, rmax, (7) where Sk denotes the set of frequency coordinates at radius k within the sector. SFC then combines a direction-ratio distance and a radial-profile distance, gated by banding saliency: SFC = Dratio + λE · g · Dprofile, (8) where Dratio = |ρpred − ρgt|, Dprofile = 1 K PK k=1 |Ppred(k) − Pgt(k)|, and g = max(ρpred, ρgt) gates the profile distance: when banding-direction energy is low, the profile distance is down-weighted to avoid penalizing predictions where banding is already weak or absent.

29845#pg8> The Dratio captures how well the directional energy concentration is preserved, while Dprofile measures the fidelity of the radial energy profile along the banding direction <ref:2606. p. 6
Where the paper says it

, rmax, (7) where Sk denotes the set of frequency coordinates at radius k within the sector. SFC then combines a direction-ratio distance and a radial-profile distance, gated by banding saliency: SFC = Dratio + λE · g · Dprofile, (8) where Dratio = |ρpred − ρgt|, Dprofile = 1 K PK k=1 |Ppred(k) − Pgt(k)|, and g = max(ρpred, ρgt) gates the profile distance: when banding-direction energy is low, the profile distance is down-weighted to avoid penalizing predictions where banding is already weak or absent.

29845#pg8>

Performance and Findings

Experiments demonstrate state-of-the-art performance on both synthetic and real benchmarks across restoration fidelity, perceptual quality, frequency consistency, and color accuracy <ref:2606.29845#pg2> BRACE achieves the best performance across all metrics on Bricker’s syn and real datasets <ref:2606. p. 8

Where the paper says it

Table 1 reports quantitative results on synthetic and real test sets. BRACE achieves the best performance across all metrics, showing strong banding removal while preserving image quality and color fidelity.

29845#pg10> The ablation study shows that MSCAM injects the extracted banding prior into spatial cross-frame fusion, improving DISTS/SFC by suppressing stripe residuals <ref:2606. p. 8
Where the paper says it

7 present the ablation study on Bricker’s real test set. MSCAM injects the extracted banding prior into spatial cross-frame fusion, improving DISTS/SFC by suppressing stripe residuals.

29845#pg2> The model is first trained on the synthetic dataset to learn basic banding removal and then fine-tuned on the real dataset to adapt to more complex degradations in real-world captures <ref:2606. p. 7
Where the paper says it

The final restoration result is obtained by feeding the output features of the last frame through a reconstruction network, as illustrated in Fig. Training proceeds in two stages: the model is first trained on the synthetic dataset to learn basic banding removal, and then fine-tuned on the real dataset to adapt to the more complex degradations in real-world captures.

29845#pg8> The results show that BRACE removes banding artifacts while restoring color and texture details, including in challenging cases with strong banding and color shifts <ref:2606. p. 8
Where the paper says it

Figure 6 shows visual comparisons on Bricker’s real test set. BRACE removes banding artifacts while restoring color and texture details, including in challenging cases with strong banding and color shifts.

29845#pg2>

Limitations

Several limitations remain open for future investigation, including handling extremely complex FB patterns such as severe compound-jagged coupling or extreme color distortions across large brightness ranges <ref:2606.29845#pg8> Device-Dependent Color Bias is another concern, as the reverse ISP pipeline is parameterized by device-specific whitebalance gains and color correction matrices <ref:2606. p. 4

Where the paper says it

Both the ground-truth I RGB GT and degraded I RGB i are mosaicked from RGB to Bayer RAW format, followed by the inverse ISP pipeline. The ISP parameters are strongly device-dependent, we determine them through analysis of real DNG metadata, as detailed in Appendix B.

29845#pg8> Computational Cost and Real-Time Deployment require optimization for on-device deployment through model pruning or efficient attention mechanisms <ref:2606.29845#pg8>

Broader Impacts

Our FB restoration model brings clear societal benefits by enhancing image quality in both everyday photography and professional workflows <ref:2606.29845#pg8> It improves visual clarity under challenging conditions, producing more faithful and pleasing images with relatively low computational cost <ref:2606.29845#pg8> The work focuses primarily on the technical contribution of the model, and transparency about its capabilities is encouraged to prevent unintended harms <ref:2606.29845#pg8>

Implementation Details

The implementation details include using a batch size of 16 and randomly cropping input patches to 128 × 128 with random horizontal flipping and rotation <ref:2606.29845#pg8> The model is optimized with AdamW [19] <ref:2606. p. 8

Where the paper says it

We use a batch size of 16 and randomly crop input patches to 128 × 128 with random horizontal flipping and rotation. The model is optimized with AdamW [19].

29845#pg8> In stage one, the learning rate is set to 1 × 10−4, and training runs for 50 epochs <ref:2606. p. 8
Where the paper says it

The model is optimized with AdamW [19]. In stage one, the learning rate is set to 1 × 10−4 , and training runs for 50 epochs.

29845#pg8> In stage two, the learning rate is lowered to 1 × 10−5, and fine-tuning runs for 20 epochs <ref:2606. p. 8
Where the paper says it

In stage one, the learning rate is set to 1 × 10−4 , and training runs for 50 epochs. In stage two, the learning rate is lowered to 1 × 10−5 , and fine-tuning runs for 20 epochs.

29845#pg8> All experiments are conducted on an NVIDIA RTX A6000 GPU <ref:2606. p. 8
Where the paper says it

5 and λcolor = 0. All experiments are conducted on an NVIDIA RTX A6000 GPU.

29845#pg8> The comparison methods include Burstormer [11], HDRFlow [41], TMRNet [48], and Flickerformer [31] <ref:2606. p. 7
Where the paper says it

LQ [ 1 2 3 4 5 ] GT Burstormer [11] HDRFlow [41] TMRNet [48] Flickerformer [31] BRACE (OURS) Figure 6: Visual comparison on the real dataset. BRACE gains great advantages over other methods.

29845#pg8> The final restoration result is obtained by feeding the output features of the last frame through a reconstruction network <ref:2606. p. 7
Where the paper says it

The recurrent state update then takes the form ri = Ti Tglobal(Fˆ i , ri−1) , (14) where ri−1 is the hidden state from the previous frame, Fˆ i is the MSCAM-modulated feature map, and Tglobal and Ti denote the global aggregation and per-frame refinement modules inherited from TRMNet, respectively. The final restoration result is obtained by feeding the output features of the last frame through a reconstruction network, as illustrated in Fig.

29845#pg8> The training proceeds in two stages, with Stage One using L1 loss and multilevel wavelet-based frequency loss LMWL <ref:2606. p. 7
Where the paper says it

Stage One: Synthetic Pretraining. In addition to the standard L1 loss, we adopt the multilevel wavelet-based frequency loss [52].

29845#pg8> and Stage Two incorporating a color correction loss MS-SWD <ref:2606. p. 7
Where the paper says it

To address this, we introduce a color loss MS-SWD [17], which matches distributions across multiple Gaussian pyramids in the CIELAB color space. The total loss for stage two is Lstage2 = Lstage1 + λcolor · LMSSWD.

29845#pg8> The total loss for stage one is Lstage1 = LL1 + λwavelet · LMWL <ref:2606. p. 7
Where the paper says it

1), this loss enhances restoration of those components by computing a weighted discrepancy over multi-scale, multi-orientation subbands, which stabilizes the suppression of distortions at different levels and orientations. The total loss for stage one is Lstage1 = LL1 + λwavelet · LMWL.

29845#pg8> and the total loss for stage two is Lstage2 = Lstage1 + λcolor · LMSSWD <ref:2606. p. 7
Where the paper says it

To address this, we introduce a color loss MS-SWD [17], which matches distributions across multiple Gaussian pyramids in the CIELAB color space. The total loss for stage two is Lstage2 = Lstage1 + λcolor · LMSSWD.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI systems can perform Flicker-Banding Removal using BRACE to handle complex FB morphologies like color shift, compound periodicity, and jagged geometries by leveraging a multi-frame RAW dataset constructed via ray-tracing simulation.

  2. The system can utilize the Frequency Aware Banding Prior (FABP) to extract three banding descriptors for each frame including stripe frequency, orientation, and peak energy ratio, providing a physically interpretable metric for banding analysis.

  3. The Multi-scale Spatial CrossAttention Modulator (MSCAM) allows the model to inject global banding priors into cross-frame fusion by computing frame-level statistics as a compact global prior token before applying scaled dot-product cross-attention.

  4. A Stripe Frequency Consistency (SFC) metric can be used to quantitatively evaluate the degree of banding removal, combining a directional energy ratio loss Dratio and a gated radial-profile distance Dprofile with a weighting factor lambda E.

Abstract

Flicker-Banding (FB) arises from temporal aliasing between a camera's rolling shutter and a display's brightness modulation, degrading screen-captured image readability with color shifts and jagged patterns. Existing single-frame methods with simplified parametric stripe models cannot reliably distinguish these artifacts from genuine texture. To address this, we conduct a systematic analysis of complex FB morphologies and reveal their significant variation across exposure settings, motivating a multi-frame bracketed RAW restoration paradigm. We construct Bricker, a synthetic-real bracketed RAW dataset built via ray-tracing-based physical simulation and an automated multi-exposure capture tool. We further propose BRACE: Bracketed RAW Flicker-Banding Removal, a multi-frame restoration model that utilizes a frequency-aware banding prior and a multi-scale spatial cross-attention modulator (MSCAM) for cross-exposure spatial fusion. We also introduce the Stripe Frequency Consistency (SFC) metric to evaluate banding removal. Experiments demonstrate state-of-the-art performance on both synthetic and real benchmarks. Our dataset and code are available at: https://github.com/ZZH-qwq/BRACE

Sources

Related papers