Predictive Beam Tracking for Sea-Air Communication under Wave-Induced Disturbances

arXiv:2606.26569 · eess.SY, cs.SY · Submitted 2026-06-25 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Robotics Radio. Generated commentary on the latest robotics and control papers.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "Predictive Beam Tracking for Sea-Air Communication under Wave-Induced Disturbances".

Dev: Here's the gist of the paper. In sea-air communication networks composed of an uncrewed aerial vehicle (UAV) and an uncrewed surface vehicle (USV), the extended target characteristics and three degree of freedom motion of the USV under sea induced disturbances cause beam misalignment in the UAV’s tracking of the USV.

Rosa: This paper proposes a predictive beam tracking scheme based on integrated sensing and communication (ISAC) for sea-air networks.

Dev: The Proposed Framework The authors propose a sensing-assisted beam tracking framework for sea-air communication systems where the UAV communicates with the CR mounted on the USV while simultaneously sensing the USV state.

Rosa: To achieve robust beam tracking under dynamic sea conditions while maintaining high communication, they develop two transmission modes in each epoch, namely the wide beam mode and the narrow beam mode.

Title and authors: Rosa: Now, diving into the summary of "Predictive Beam Tracking for Sea-Air Communication under Wave-Induced Disturbances", this paper outlines how you can use sensing to guide the communication.

Dev: Basically, it says you have a time interval T that gets chopped up into N epochs, and in each epoch, you decide whether to use a wide beam mode or a narrow beam mode based on some optimization goal.

Taro: I'm wondering about that optimization goal, because if it’s just trying to maximize communication rate or sensing accuracy separately, doesn't that create a trade-off we have to manage?

Rosa: Exactly. The paper says they formulate this as a communication rate maximization problem and then reformulate it into a time allocation problem where the objective function considers the uncertainty in the angle under sea clutter.

Dev: That’s interesting because it means you aren't just picking one mode; you're choosing when to use which mode based on how uncertain you are about where the vehicle is due to those sea conditions.

Taro: It sounds like they’re trying to intelligently spend their time either getting a good sense of the target or sending a really strong signal.

The paper's summary: Rosa: To unpack that, the paper details how they develop a sea-air state evolution model to characterize the motion of that surface vehicle. This model has to account for surge, sway, yaw, and those sea induced disturbances.

Dev: And they build a sea-air tailored extended Kalman filter or EKF model for tracking the six dimensional state of the communication receiver on that vehicle, explicitly including those disturbances in the tracking process.

Taro: So they are creating a sophisticated way to estimate where the target is by modeling all those coupled motions and external disturbances simultaneously.

Rosa: Then, they look at how you get your measurements from multiple scatterers—those are modeled as sea clutter—and use that information with the EKF to predict positions for beam alignment.

Dev: And this whole structure allows them to develop this wide and narrow beam switching scheme based on sub-array selection, where the transmit sub-array size changes depending on what they need.

Taro: It seems like the key insight here is using that sensing data, which comes from the wide beam mode, to inform how you should use the high-gain narrow beam mode for communication.

The paper's improvements: Rosa: The paper points out a few ways this approach can be improved or extended. One major improvement is using a dual-mode beam switching scheme that uses the wide beam mode for full coverage and sensing while the narrow beam mode exploits the estimated state for high-gain communication.

Dev: That makes sense, it’s about making sure you use both modes strategically instead of just picking one or the other randomly.

Taro: And another improvement they suggest is tying the time allocation factor directly to sea clutter intensity. If there's more clutter, that should change how long you spend in the wide beam mode versus the narrow beam mode.

Rosa: Yes, they show that stronger sea clutter means a lower sensing signal-to-clutter-plus-noise ratio, which degrades the accuracy of your state estimation.

Dev: So the paper suggests solving a one dimensional optimization problem to balance that sensing accuracy against what you can actually communicate at any given moment.

Conclusion: Rosa: Wrapping up this look at "Predictive Beam Tracking for Sea-Air Communication under Wave-Induced Disturbances", the paper shows how modeling the USV as an extended target with multiple scatterers sets up a way to handle those wave effects.

Dev: It establishes a sea-air state space model that captures the motion of the communication receiver, and then uses an EKF based predictive tracking method that accounts for those sea clutter effects during beam alignment.

Taro: I think what’s important is how they figure out that time allocation strategy to balance sensing and communication performance.

Rosa: They show that this scheme can achieve higher tracking accuracy than other systems, and it maintains a stable high rate while achieving the highest accumulated throughput in their communication comparisons.

Dev: It effectively reduces the overhead from wide-beam sensing while still keeping the narrow-beam communication reliable, which is a good balance for real applications.

Taro: The limitation they mention is that their basic scenario was limited to vehicles moving in a constant-velocity straight line, so you have to watch how it handles actual maneuvers like overtaking or lane changing.

Rosa: Exactly. And they also point out that the applicability boundary of that extended target model depends on the range, and stronger sea clutter conditions directly impact how much sensing time you allocate because it lowers the effective sensing signal-to-clutter-plus-noise ratio.

Dev: So, to summarize, this paper presents an ISAC framework for sea-air networks that uses a tailored EKF and optimized time allocation to handle wave disturbances and get better tracking under noisy conditions.

Rui Zhang, Fuwang Dong, Wei Wang, Zhen Du

Harbin Engineering University · Nanjing University of Information Science and Technology

eess.SY, cs.SY

Submitted: 2026-06-25

Updated: 2026-11-02

Comments: 15 pages, 8 figures

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 69/100

The gist: In sea-air communication networks composed of an uncrewed aerial vehicle (UAV) and an uncrewed surface vehicle (USV)…

Key concepts

Extended Target Model
This concept treats the USV not as a single point but as an extended object with multiple scatterers. This is crucial because the USV's motion, combined with sea clutter, causes complex reflections. Modeling it this way allows for a more accurate prediction of its position and state when sensing.
Sea-Air State Evolution Model
This model describes how the CR (Communication Receiver) on the USV moves over time. It specifically accounts for coupled motions: surge (forward/backward), sway (side-to-side), and yaw (rotation). Importantly, it also incorporates sea induced disturbances to accurately predict the target's six-dimensional state.
Time Allocation Optimization
This involves a mathematical process to decide how much time should be spent in wide beam mode versus narrow beam mode. The goal is to maximize communication rate while ensuring sufficient sensing accuracy. This is done by solving an optimization problem that considers the uncertainty caused by sea clutter.
Extended Kalman Filter (EKF)
The EKF is a mathematical tool used to track the USV's six-dimensional state. It uses predictions from the state evolution model and combines them with measurements from scatterers. The filter is specifically tailored for sea-air environments, explicitly incorporating surge, sway, yaw, and sea disturbances into its estimation process.

Terminology

Summary

In sea-air communication networks composed of an uncrewed aerial vehicle (UAV) and an uncrewed surface vehicle (USV), the extended target characteristics and three degree of freedom motion of the USV under sea induced disturbances cause beam misalignment in the UAV’s tracking of the USV. p. 0 This paper proposes a predictive beam tracking scheme based on integrated sensing and communication (ISAC) for sea-air networks. p. 0

The Proposed Framework

The authors propose a sensing-assisted beam tracking framework for sea-air communication systems where the UAV communicates with the CR mounted on the USV while simultaneously sensing the USV state. To achieve robust beam tracking under dynamic sea conditions while maintaining high communication, they develop two transmission modes in each epoch, namely the wide beam mode and the narrow beam mode. p. 1 Each epoch is divided into two stages according to the time allocation factor. p. 1

State Modeling and Estimation

The authors develop a sea-air state evolution model to characterize the CR motion by jointly considering the surge, sway, yaw, and sea induced disturbances of the USV. The measurement equation for the extended target USV is constructed from multiple scatterer observations with sea clutter modeled as measurement noise. p. 0 They also develop a sea-air tailored EKF model to track the six dimensional state of the CR on the USV, explicitly accounting for surge, sway, yaw, and sea induced disturbances. p. 1

Time Allocation Optimization

The authors formulate a communication rate maximization problem (P1) to balance sensing accuracy and communication rate by allocating a fraction ρn to the wide beam mode and 1 − ρn to the narrow beam mode. They reformulate this into a tractable time-allocation problem (P2) where the objective function involves the posterior angular uncertainty under sea clutter. p. 7 This problem (P2) is solved numerically over the feasible interval 0 < ρn ≤ 1 via a one-dimensional grid search. p. 8

Performance Validation

Simulation results demonstrate that the proposed scheme achieves higher tracking accuracy than state-of-the-art benchmark schemes. The proposed scheme maintains a stable high rate and achieves the highest accumulated throughput in communication performance comparisons. p. 1 The results indicate that the proposed framework effectively reduces the wide-beam sensing overhead while preserving reliable narrow-beam communication. p. 1

Extended Target Effect and Clutter Impact

The paper reveals the range dependent applicability boundary of the extended target model and the effect of sea clutter intensity on wide beam sensing time allocation. A larger Pk,n indicates stronger sea clutter and more severe sea conditions, which reduces the effective sensing SCNR and degrades CR state estimation accuracy. p. 1 The average time allocation factor ρ¯ increases as Pk,n grows because stronger sea clutter reduces the sensing SCNR and increases the estimation error. p. 8

Conclusion

This paper proposed an ISAC-based predictive beam tracking framework for sea-air communication networks. By modeling the USV as an extended target with multiple distributed scatterers, a sea-air state-space model was established to capture the CR state evolution under the coupled surge, sway, yaw, and sea induced motion. p. 0 Based on this model, an EKF-based predictive tracking method incorporating sea clutter effects was developed and a time allocation strategy was further optimized to balance sensing accuracy and communication performance. p. 0 Future work will incorporate environmental uncertainties and imperfect prior information to enhance beam tracking robustness in maritime environments. p. 0

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Predictive Beam Tracking Framework Implementation: The improved AI system can implement a dual-mode beam switching scheme, utilizing a wide beam mode for full USV coverage and state sensing while employing a narrow beam mode to exploit the estimated CR state for high-gain communication, as described in the paper's contribution summary.

  2. Sea Condition Based Time Allocation: The system can dynamically optimize the time allocation factor by solving a one-dimensional optimization problem (P2) to balance sensing accuracy and communication rate, allowing it to adjust the time of wide beam mode based on sea clutter intensity.

  3. Robust State Estimation via Extended Kalman Filter: The AI system will develop a sea-air tailored Extended Kalman Filter (EKF) model that explicitly accounts for the surge, sway, yaw, and sea induced disturbances of the USV to track the six dimensional state of the CR on the USV.

  4. Accurate Target Modeling: The system must explicitly model the USV as an extended scattering target with multiple distributed scatterers instead of a point target to accurately characterize its motion and measurement equation under sea clutter.

  5. Sea Clutter Impact Characterization: The AI can incorporate sea clutter into the measurement covariance by modeling it via a compound-Gaussian representation, which allows the system to derive sea clutter induced measurement noise variances based on effective sensing signal-to-clutter-plus-noise ratio (SCNR).

  6. Adaptive Antenna Subarray Selection: The system will use an antenna reconstruction method that updates the transmit subarray sizes (Nx,n and Ny,n) based on the maximum horizontal projection length of the USV to ensure full coverage in wide beam mode.

  7. Performance-Driven Mode Switching: The AI system can utilize a beam alignment probability calculation (PA,n) derived from EKF posterior error covariance to decide the optimal time allocation factor ρn, maximizing throughput by balancing sensing overhead against communication rate.

Related papers