Integrating Sensing into Covert Communications: Opportunities and Challenges

arXiv:2606.23073 · eess.SP · Submitted 2026-06-22 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: I'm Rosa.

Dev: And I'm Dev, here with Taro.

Rosa: We're looking at the paper: "Integrating Sensing into Covert Communications".

Dev: Here's the gist of the paper. Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries <ref:2606.23073#pg2> However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments <ref:2606.23073#pg2>.

Rosa: This article investigates sensing-empowered covert communications, where adversary and environmental information are used to guide transmission and jamming control <ref:2606.23073#pg2>.

Dev: System Paradigm Shift The research shows how sensing changes covert system design from passive concealment to state-aware decision-making <ref:2606.23073#pg2>.

Rosa: This shift is motivated by the fact that sensing provides a practical way to overcome limitations where fixed covert policies fail in dynamic wireless environments <ref:2606.23073#pg2>.

Title and authors: Rosa: Now, let's look at what they actually propose in "Integrating Sensing into Covert Communications: Opportunities and Challenges". They lay out a few different modes of operation, which they call sensing-then-covert transmission, integrated sensing and jamming, and full-duplex receiver-assisted covert transmission.

Dev: Those are the three main architectures they present. It's interesting how each mode uses the information differently to guide the transmitter’s behavior.

Taro: I wonder if those modes are practical outside of a perfect lab setting. I mean, you need sensing infrastructure to work really well for some of those modes.

Rosa: That’s a fair point, Taro. They mention that this paradigm is particularly useful when dedicated sensing infrastructure is available, especially if you can get high-resolution sensing devices to get a more accurate picture of the adversary's state.

Dev: So, if you sense that the adversary is close by, the system can adopt a worst-case strategy to guarantee covertness even temporarily suspending transmission. If they are blocked by obstacles or strong interference, Alice might be able to achieve a higher covert rate while still meeting the constraint.

Taro: That makes sense for dealing with mobility and obstacles. It lets you adjust your strategy based on what the sensing tells you about the current situation rather than just guessing what might happen next.

Rosa: Right, so sensing gives Alice more flexibility in things like beamforming, power control, and time-frequency resource allocation based on how actively she estimates the adversary state.

The paper's summary: Dev: The paper summarizes this whole concept by focusing on how sensing lets us move beyond just statistical assumptions about the adversary. Instead of relying only on those assumptions, the system actively estimates where Willie is located and what their status is right now.

Rosa: That’s a big deal because it means the system can be much more flexible with its covert beamforming and power control than if you were just using standard methods that don't account for real-time environmental changes.

Taro: So, the system isn't just reacting to noise; it’s using sensing to predict or at least accurately estimate the adversary's actual position and conditions, which lets Alice make a more informed choice about secrecy.

Dev: And that estimation helps them adapt their transmission policy toward Bob. It moves the system from passive concealment into active adversary-aware transmission designs, which is what they call it.

Rosa: They point out that this active adaptation means we aren't just sending data; we are choosing *how* to send it based on the sensed environment and the perceived threat level of Willie.

Taro: But they do acknowledge some practical limitations right there in their summary. They mention that this sensing phase itself consumes computational resources before any data is even delivered, which inevitably increases latency.

Dev: That latency is a major concern for real-time loops like we work on. If you spend too much time sensing and processing the environment, you’re fighting the very speed we need for reliable delivery.

The paper's improvements: Rosa: The authors suggest several specific intelligent sensing approaches that they think can really help make this work under tight budgets for probing and exposure. They focus on extracting only the information that is actually relevant to covertness.

Dev: They lay out four main paradigms: Multi-Modal Sensing, Semantic Sensing, Predictive Sensing, and Cooperative Sensing. Each one has a different way of gathering and interpreting the environmental information for the transmission policy.

Taro: Let's talk about Semantic Sensing—they shift the goal away from trying to reconstruct everything perfectly, which is what traditional sensing does, toward interpreting only those compact variables that matter for covertness.

Rosa: Right. So instead of building a huge map of the entire area, they are looking for specific features that directly relate to whether Willie is close or far away, which reduces the amount of data we have to process.

Dev: Predictive Sensing is another one where they use historical observations to try and anticipate adversary mobility and how the channel itself will evolve. That allows them to be proactive instead of just reactive when things change fast.

Taro: I like that proactive element, Taro. It means the system can prepare for a likely Willie-related region based on past data, which should help compensate for that mobility mismatch we see in urban environments where channels vary rapidly.

Rosa: And they also have Cooperative Sensing, which addresses the problem of local field of view limitations by forming a distributed perception network among nodes. This lets legitimate nodes share compressed feature maps to mitigate those sensing blind spots.

Conclusion: Dev: So wrapping up, the main point is that integrating sensing moves covert design from just exploiting uncertainty passively to making active decisions based on what is sensed in real-time. It’s about adapting your strategy continuously.

Rosa: They confirm that sensing-assisted beamforming can actually improve how we use the available spatial resources and make covert data delivery more reliable in channels that aren't steady.

Taro: I think the challenge they highlight is definitely around exposure and resource allocation. It’s not just about having a better algorithm; it’s about managing how much energy and processing power you use during that sensing phase before you can actually send your data.

Dev: That resource consumption is a real hurdle for low-latency systems, but the potential for improved spatial utilization in dynamic channels seems promising if we can manage that trade-off.

Rosa: Exactly. The paper "Integrating Sensing into Covert Communications: Opportunities and Challenges" shows us that the future isn't just about hiding things; it's about using sensing to make smarter, more adaptive decisions under pressure.

Taro: It opens up avenues for AI-Enabled Covert Intelligence to learn from all these different observations for truly adaptive control in the long run.

Dev: We’ll keep an eye on those future directions as we look at how these architectures translate into real-world systems that can handle the latency constraints of current hardware.

The Education University of Hong Kong · University of Technology Sydney · Shenzhen University · Sungkyunkwan University

eess.SP

Submitted: 2026-06-22

Updated: 2026-11-12

License: http://creativecommons.org/publicdomain/zero/1.0/

Importance score: 72/100

The gist: Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries <ref:2606.23073#pg2> However…

Key concepts

System Paradigm Shift
The research shows a fundamental change in covert system design, moving from passively hiding signals to actively making decisions based on real-time environmental sensing. This shift allows the system to adapt its transmission strategy dynamically instead of relying on fixed rules that fail in changing wireless conditions.
Intelligent Sensing Approaches
These are advanced methods for gathering useful information about the environment under strict constraints. They include multi-modal sensing (using different data types), semantic sensing (interpreting data into meaningful variables), and predictive sensing (forecasting future changes) to extract only the most critical information for covert operations.
Semantic Sensing
This approach focuses on interpreting raw physical-layer observations directly into high-level, task-oriented variables that are relevant to maintaining covertness. Instead of trying to perfectly reconstruct the entire environment, it extracts compact features that tell the system what is important for its specific goal.
Cooperative Sensing
This involves using multiple sensing nodes distributed across an area to overcome limitations like blind spots or poor line-of-sight. By forming a network, legitimate nodes can share compressed feature maps to enhance detection and improve performance in challenging areas like Non-Line-of-Sight (NLoS) regions.

Terminology

Summary

Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries <ref:2606. p. 0

Where the paper says it

1 Integrating Sensing into Covert Communications: Opportunities and Challenges Jun Wu, Xiaoqi Zhang, Haoyuan Pan, Member, IEEE, Gaosheng Zhao, Dong In Kim, Life Fellow, IEEE, and Tse-Tin Chan, Member, IEEE Abstract—Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries. However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments.

23073#pg2> However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments <ref:2606. p. 0
Where the paper says it

1 Integrating Sensing into Covert Communications: Opportunities and Challenges Jun Wu, Xiaoqi Zhang, Haoyuan Pan, Member, IEEE, Gaosheng Zhao, Dong In Kim, Life Fellow, IEEE, and Tse-Tin Chan, Member, IEEE Abstract—Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries. However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments.

23073#pg2>. This article investigates sensing-empowered covert communications, where adversary and environmental information are used to guide transmission and jamming control <ref:2606. p. 0
Where the paper says it

However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments. This article investigates sensing-empowered covert communications, where adversary and environmental information are used to guide transmission and jamming control.

23073#pg2>.

System Paradigm Shift

The research shows how sensing changes covert system design from passive concealment to state-aware decision-making <ref:2606.23073#pg2>. This shift is motivated by the fact that sensing provides a practical way to overcome limitations where fixed covert policies fail in dynamic wireless environments <ref:2606. p. 0

Where the paper says it

As a result, a fixed covert policy derived from long-term statistics may fail to capture the actual exposure risk. Sensing provides a practical way to overcome this limitation.

23073#pg2>. Specifically, sensing enables a shift from blind uncertainty exploitation to state-aware covert design <ref:2606. p. 0
Where the paper says it

For example, the legitimate transmitter may reduce leakage toward highrisk directions or exploit favorable propagation conditions to deliver covert data. In this sense, sensing enables a shift from blind uncertainty exploitation to state-aware covert design.

23073#pg2>.

Sensing-Empowered Architectures

The paper presents representative architectures for sensing-empowered covert communications, illustrating how sensing can support adversary-aware transmission and friendly jamming control <ref:2606.23073#pg2>. These architectures identify new design considerations introduced by sensing, including how it changes performance metrics and enlarges the optimization degrees of freedom (DoFs) <ref:2606. p. 1

Where the paper says it

We identify the new design considerations introduced by sensing. In particular, we discuss how sensing changes the performance metrics, enlarges the optimization degrees of freedom (DoFs), and creates coupled constraints between sensing reliability and covertness.

23073#pg2>. The proposed modes include sensing-then-transmission, integrated sensing and jamming, and full-duplex receiver-assisted covert transmission <ref:2606. p. 1
Where the paper says it

Alice Willie Bob Fusion Center Covert transmission Sensing/Probing Radar Detection ISAC Alice Willie Bob Covert transmission Sensing & Jamming Alice Willie SI Tx Rx To Wil ie From Alice Bob FD Mode Jamming (c) Full-duplex receiver-assisted covert transmission. 1: Representative modes of sensing-empowered covert communications.

23073#pg2>.

Intelligent Sensing Approaches

The paper discusses intelligent sensing paradigms for covert communications that focus on extracting decision-relevant information under limited probing and exposure budgets <ref:2606.23073#pg2>. These paradigms include:

  1. Multi-Modal Sensing, which uses heterogeneous information sources like visual observations and environmental maps to infer the adversary’s state <ref:2606. p. 3

    Where the paper says it

    By incorporating heterogeneous information sources, such as visual observations, environmental maps, and historical mobility data, the legitimate system can infer the adversary’s state and propagation conditions with reduced reliance on active radio emissions. Another important benefit of multi-modal sensing is improved robustness.

    23073#pg2>.

  2. Semantic Sensing, which shifts the perception objective from reconstruction-oriented accuracy to task-oriented interpretation by extracting compact covertness-relevant variables <ref:2606. p. 3

    Where the paper says it

    Semantic Sensing While multi-modal integration provides a comprehensive representation of the physical environment, the resulting high-dimensional data may introduce substantial processing and signaling overhead. To bridge the gap between raw measurements and actionable transmission strategies, semantic sensing shifts the perception objective from reconstruction-oriented accuracy to task-oriented interpretation [13].

    23073#pg2>.

  3. Predictive Sensing, which anticipates adversary mobility and channel evolution using historical observations to support proactive risk management <ref:2606. p. 4

    Where the paper says it

    Toward this end, predictive sensing shifts covert communications from reactive decision-making to proactive risk management over time. Instead of relying solely on instantaneous state estimation, the system predicts the future evolution of Willie’s mobility, wireless channels, and exposure risks.

    23073#pg2>.

  4. Cooperative Sensing, which addresses local field of view limitations by forming a distributed perception network to mitigate sensing blind spots <ref:2606. p. 5

    Where the paper says it

    Cooperative sensing addresses the limitations of individual sensing nodes by forming a distributed perception network [6]. Through reliable communication links, multiple legitimate nodes can share local observations to obtain broader situational awareness.

    23073#pg2>.

Case Study Findings

A case study in low-altitude wireless networks (LAWNs) illustrates the benefits of intelligent sensing-assisted covert transmission <ref:2606.23073#pg2>. The comparison between conventional sensing, predictive beamforming, and semantic beamforming demonstrates that semantic beamforming achieves a more stable performance trend by concentrating on covertness-relevant features rather than sensing the entire environment <ref:2606. p. 5

Where the paper says it

Predictive beamforming improves the tradeoff by exploiting historical observations to focus on the likely Willie-related region. In comparison, semantic beamforming achieves a more stable performance trend by concentrating on covertness-relevant features rather than sensing the entire environment, which demonstrates the benefit of task-oriented sensing in urban LAWNs.

23073#pg2>. This highlights the benefit of task-oriented sensing in urban LAWNs <ref:2606. p. 5
Where the paper says it

Predictive beamforming improves the tradeoff by exploiting historical observations to focus on the likely Willie-related region. In comparison, semantic beamforming achieves a more stable performance trend by concentrating on covertness-relevant features rather than sensing the entire environment, which demonstrates the benefit of task-oriented sensing in urban LAWNs.

23073#pg2>.

Future Research Directions

Future directions include developing AI-Enabled Covert Intelligence to learn from heterogeneous observations for adaptive control <ref:2606.23073#pg2>, Spectrum Map-Aided Covert Networking to identify low-risk transmission regions, and Quantum-Based Covert Communications for long-term unpredictability <ref:2606. p. 6

Where the paper says it

Spectrum Map-Aided Covert Networking By capturing the distribution of spectrum occupancy and channel quality over space and time, spectrum maps provide a structured view of the wireless environment. When enriched with blockage information and monitoring risk, spectrum maps can help the legitimate transmitter identify low-risk transmission regions and exploit ambient masking opportunities.

23073#pg2>.

Conclusions

The article concludes that sensing shifts covert design from blind exploitation of uncertainty toward adaptive decision-making <ref:2606.23073#pg2>. It also notes new challenges in exposure, resource allocation, and information freshness <ref:2606. p. 6

Where the paper says it

Conclusions This article investigated sensing-empowered covert communications, where environmental and adversary-related sensing information can support state-aware transmission and jamming control. We discussed how sensing shifts covert design from blind exploitation of uncertainty toward adaptive decision-making, while introducing new challenges in exposure, resource allocation, and information freshness.

23073#pg2>. The study confirms the potential of sensing-assisted beamforming to improve spatial resource utilization and reliable covert data delivery in dynamic channels <ref:2606. p. 0
Where the paper says it

We further discuss several intelligent sensing paradigms that extract task-relevant information with limited active probing. A case study in low-altitude wireless networks illustrates that sensing-assisted beamforming can improve spatial resource utilization and the reliability of covert data delivery in time-varying channels.

23073#pg2>.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Sensing-empowered covert communications can shift system design from passive concealment to state-aware decision-making, allowing transmitters to reduce leakage toward highrisk directions or exploit favorable propagation conditions to deliver covert data.

  2. The AI system can implement a sensing-then-covert transmission paradigm where external sensing nodes characterize the environment, and based on that information, Alice adapts her covert transmission policy.

  3. The system can utilize predictive beamforming to compensate for mobility-induced mismatch by exploiting historical observations to focus on the likely Willie-related region, which helps in urban LAWNs where channels vary rapidly.

  4. Semantic sensing enables the AI system to map received physical-layer observations directly into covertness-relevant semantic variables, reducing signaling overhead while avoiding explicit high-dimensional channel reconstruction.

  5. The AI can employ cooperative sensing by forming a distributed perception network, allowing legitimate nodes to mitigate sensing blind spots and enhance Willie detection in NLoS or occluded regions through shared compressed feature maps.

Abstract

Covert communications aim to hide the existence of wireless transmissions from unauthorized adversaries. However, conventional designs based on blind interference or passive uncertainty can be ineffective in dynamic propagation environments. This article investigates sensing-empowered covert communications, where adversary and environmental information are used to guide transmission and jamming control. We show how sensing changes covert system design from passive concealment to state-aware decision-making, while also introducing new challenges related to exposure and resource consumption. We further discuss several intelligent sensing paradigms that extract task-relevant information with limited active probing. A case study in low-altitude wireless networks illustrates that sensing-assisted beamforming can improve spatial resource utilization and the reliability of covert data delivery in time-varying channels. Finally, several open issues are discussed to support more adaptive covert wireless systems.

Sources

Related papers