Hyper-Nuclei 4 lambda Production in sqrt s = 3 GeV Au+Au collisions at RHIC
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Nuclear Experiment. The day in nuclear experiment: beams, targets and what came out.
Kai: We're looking at the paper: "Hyper-Nuclei 4 lambda Production in sqrt s = 3 GeV Au+Au collisions at RHIC".
Mira: Here's the gist of the paper. The STAR experiment reports the first measurement of the 4ΛHe hyper-nuclei yield as a function of rapidity and transverse momentum in 0–50% central Au+Au collisions at √sNN = 3 GeV This finding is important because it suggests a coalescence-based formation scenario for hyper-nuclei at this energy Experimental Setup and Data Collection The data were collected by the STAR experiment in 2018, using the fixed-target (FXT) configuration The collision centrality was determined by fitting the charged particle multiplicity with Glauber model About 160 million good events were selected for analysis after vertex cut and centrality selection.
Kai: Particle identification in this analysis is done with the Time Projection Chamber (TPC) detector.
Mira: Signal Reconstruction and Yield Analysis The 4ΛHe is reconstructed via its three-body decay channel 4ΛHe → 3He + p + π− with a branching ratio of 0.23.
Kai: The invariant mass spectrum of 4ΛHe candidates and rotation background was analyzed, resulting in a total yield of over 300 counts and a statistical significance of approximately 10.
Title and authors: Kai: So we're diving into the title of this paper, "Hyper-Nuclei four lambda Production in sqrt s = three GeV Au+Au collisions at RHIC" <ref:2606.22457#pg1,3 GeV Au+Au collisions at RHIC>. It’s a very specific description of the experiment and what they are measuring.
Mira: It tells you immediately that we are talking about four lambda hyper-nuclei. These are these exotic particles made of four strange quarks, and the collision system is gold-gold collisions at three gigaelectronvolts per nucleon.
Lev: And the focus on sqrt s equals three gigaelectronvolts per nucleon tells us the energy regime we are probing, which is relatively low for these kinds of collisions compared to higher energies.
Kai: Right. It sets the stage for understanding how strange particles behave in this specific collision environment at this particular energy scale.
Mira: The authors are using this setup to test ideas about how hyperons get incorporated into nuclear matter, like forming hyper-nuclei.
Lev: They are looking at the production of these four lambda hyper-nuclei, which is a bit more complex than just a single lambda particle.
Kai: And they are measuring this yield as a function of rapidity and transverse momentum to see if there's any pattern in how these particles are being created.
Mira: That pattern analysis is key because it’s what lets them move from just counting things to understanding the underlying physics of the production mechanism.
Lev: So, the title isn't just a label; it defines the scope of their investigation into hyper-nuclei formation at this collision energy.
The paper's summary: Kai: They summarize that they report the first measurement of four lambda hyper-nuclei yield as a function of rapidity and transverse momentum in zero to fifty percent central gold-gold collisions at three gigaelectronvolts per nucleon <ref:2606.22457#pg1,hyper-nuclei yield as a function of rapidity and transverse momentum in>.
Mira: And the main finding they highlight is that this measurement suggests a coalescence-based formation scenario for hyper-nuclei at this energy.
Lev: So, they are saying that the evidence points toward these particles being formed by nucleons coming together in a specific way during the collision process.
Kai: That’s what we thought, but the authors are confirming it with their data showing consistency between different measurements.
Mira: They show that the yield of four lambda hyper-nuclei as a function of rapidity is consistent with that of four lambda hyper-nuclei.
Lev: And they confirm the ratio between those four lambda particles and the standard four lambda hyper-nuclei is consistent with the ratio we see between three helium nuclei and tritons.
Kai: So, it’s not just one result; it's a set of consistent results that build up to this conclusion.
Mira: They also show that all those measurements, including the transverse momentum spectra, can be reasonably described by the JAM with a coalescence afterburner.
Lev: This model is the one they are using to explain both the yield per unit rapidity and the average transverse momentum distributions observed in their data.
The paper's improvements: Kai: The paper discusses how they can improve their analysis by incorporating coalescence afterburner models alongside thermal model predictions to get a better picture.
Mira: This combination is what allows the AI system to reproduce both the yield and mean transverse momentum distributions for four lambda hyper-nuclei and four lambda hyper-nuclei.
Lev: From an engineering standpoint, that means you need a common set of coalescence parameters that work for both three helium lambda interactions and tritium lambda interactions.
Kai: So they are saying that using a single set of coalescence parameters for both types of hyperon systems can reproduce both the yield and mean transverse momentum distributions for four lambda hyper-nuclei and four lambda hyper-nuclei.
Mira: That implies that their production is dominated by the coalescence mechanism rather than something else entirely.
Lev: It’s about getting those parameters right, because if they're off, the model won't match the experimental data at all.
Conclusion: Kai: So to wrap up this paper on "Hyper-Nuclei four lambda Production in sqrt s = three GeV Au+Au collisions at RHIC", it’s showing that the production is strongly linked to coalescence <ref:2606.22457#pg1,3 GeV Au+Au collisions at RHIC>.
Mira: They've established that the yield ratios are consistent across different rapidities, which helps probe the interaction between three helium nuclei and tritons and a lambda hyperon.
Lev: And they also show that while the canonical thermal model fits those ratios, it overpredicts the absolute yields, which is a crucial point for constraining nuclear matter equations of state.
Kai: So they're telling us that future precise measurements will be needed to really test whether this coalescence picture or the thermal descriptions are correct.
Mira: We’ll keep looking at how we can refine these coalescence parameters and see if they can describe both the yield and mean transverse momentum distributions better next time.
Lev: And for me, it's about making sure that when we build a model like JAM plus coalescence afterburner, those parameters are robust enough to handle real hardware simulations.
STAR experiment · Relativistic Heavy Ion Collider
nucl-ex
Submitted: 2026-06-21
Updated: 2026-11-16
Comments: 17 pages, 6 figures, 2 tables. To be published in Chinese Physics C
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 73/100
The gist: The STAR experiment reports the first measurement of the 4ΛHe hyper-nuclei yield as a function of rapidity and transverse momentum in 0–50% central Au+Au collisions at √sNN = 3 GeV This finding…
Key concepts
- 4Lambda Hyper-nuclei
- These are exotic nuclei containing four Lambda baryons ($\Lambda$) bound within a nucleus (like Helium). Measuring their yield helps scientists understand how hyperons are created and interact inside hot, dense nuclear matter formed in heavy-ion collisions.
- Coalescence Afterburner Model
- This is a theoretical model used to describe how particles form at low relative momenta. It suggests that hyper-nuclei are formed when individual nucleons and hyperons 'coalesce' or stick together after the initial collision, rather than forming purely through thermal equilibrium.
- Yield Ratios (e.g., 4Lambda/4LambdaH)
- Comparing the yields of different hyper-nuclei systems allows researchers to probe the interaction differences between different hyperon species ($\Lambda$ vs. $\Sigma$). These ratios are crucial tools for distinguishing between various production mechanisms, helping to confirm if a specific formation process dominates.
- JAM Model
- The JAM model is a transport model used in the study. It simulates the evolution of the system after the initial collision, incorporating dynamics like coalescence to describe how particles move and interact, which helps explain observed momentum distributions.
Terminology
Summary
The STAR experiment reports the first measurement of the 4ΛHe hyper-nuclei yield as a function of rapidity and transverse momentum in 0–50% central Au+Au collisions at √sNN = 3 GeV This finding is important because it suggests a coalescence-based formation scenario for hyper-nuclei at this energy
Experimental Setup and Data Collection
The data were collected by the STAR experiment in 2018, using the fixed-target (FXT) configuration The collision centrality was determined by fitting the charged particle multiplicity with Glauber model About 160 million good events were selected for analysis after vertex cut and centrality selection. Particle identification in this analysis is done with the Time Projection Chamber (TPC) detector. p. 2 After vertex cut and centrality selection, about 160 million
good events are selected for analysis. 3 Particle identification
In this analysis, particle identification (PID) is done with the Time Projection Chamber
(TPC) [24] detector.Where the paper says it
Signal Reconstruction and Yield Analysis
The 4ΛHe is reconstructed via its three-body decay channel 4ΛHe → 3He + p + π− with a branching ratio of 0.23. The invariant mass spectrum of 4ΛHe candidates and rotation background was analyzed, resulting in a total yield of over 300 counts and a statistical significance of approximately 10. p. 3 After normalizing these two invariant mass spectra in the region beyond
6σ from the magenta vertical lines, the subtraction between them gives a raw signal spectrum. This spectrum is fitted with a Gaussian function plus a 1st order polynomial, resulting in a
total yield of over 300 counts and a statistical significance of approximately 10. The reconstruction
efficiency is estimated by embedding method, in which Monte Carlo (MC) simulations of
4
ΛHe decays are embedded into MB events at a 5% ratio and then processed through the
same reconstruction procedure with the same topological cuts. The detector responses to MC
tracks are simulated using GEANT3 [28].Where the paper says it
Where the paper says it
Model Comparison and Interpretation
The yield of 4ΛHe as a function of rapidity is consistent with that of 4ΛH The rapiditydependent yield ratio of 4ΛHe/4ΛH is consistent with that of 3He/t. All the measurements, as well as the transverse-momentum spectra, can be reasonably described by the JAM with a coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei at this energy. p. 0 We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t. All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t. All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. The canonical thermal model reproduces the observed yield ratios but
overpredicts the absolute hyper-nuclei yields. All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. The canonical thermal model reproduces the observed yield ratios but
overpredicts the absolute hyper-nuclei yields.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Key Findings on Yield Ratios
The yield ratio of 3He/t has a flat trend from the mid-rapidity toward the target rapidity region. The yield ratio of 4ΛHe/4ΛH agrees with the 3He/t ratio as a function of rapidity. p. 0 5 standard deviations. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t. Blast-wave function is used by default to
fit and extrapolate the pT spectrum to low pT region. Alternatively, Boltzmann and mT
exponential functions are used to fit the pT spectrum, which are shown as equation (3) and
(4), respectively:
Boltzmann :∝ exp(−mT/TB) (3)
mT exponential :∝ mTexp(−mT/TB) (4)
We take half of the maximum absolute difference in the extrapolation region between different
fit functions as the systematic uncertainty due to limited low-pT acceptance. As a comparison, the transport model JAM [32, 33] with coalescence
afterburner predictions are shown as blue bands. The model predictions are consistent with
the experimental data, except for the mid rapidity region where data points are systematically
lower.Where the paper says it
Where the paper says it
Where the paper says it
Systematic Uncertainties
The total systematic uncertainty for dN/dy is dominated by topological cuts and extrapolation The total systematic uncertainty for ⟨pT⟩ is also significant, with extrapolation being a major contributor. Among all sources, the topological cuts and the extrapolation dominate the overall systematic uncertainty for both dN/dy and ⟨pT⟩. p. 8 The total systematic uncertainty is obtained by adding the individual contributions in quadrature. p. 8 Tables 1 and 2 summarize the systematic uncertainties of dN/dy and ⟨pT⟩ from various sources
at different rapidity regions. The total systematic uncertainty is obtained by adding the individual contributions in quadrature.Where the paper says it
Where the paper says it
Conclusion on Production Mechanism
With a common set of coalescence parameters for both 3He-Λ and t-Λ, calculations from the transport model JAM plus coalescence afterburner can reproduce both the yield and mean pT distributions for 4ΛHe and 4ΛH. This suggests that their production is dominated by the coalescence mechanism. p. 9 In an intuitive coalescence picture, 4
ΛHe (4
ΛH) can be dominantly formed
by coalescing a 3He(t) and a Λ hyperon. Although the production mechanism of light nuclei is
not fully understood, which may involve a complicated dynamic evolution during the collision,
3He and t are formed in the same stage due to the isospin symmetry in the strong interaction
dominated processes. The chemical freeze-out
temperature Tch (≈ 85 MeV), and the baryon chemical potential µB (≈ 728 MeV) are taken
from the parameterization of Ref. [40] which can reasonably describe the measured yields of
pion, kaon, proton and hyperons in the central heavy-ion collisions. The chemical freeze-out
temperature Tch (≈ 85 MeV), and the baryon chemical potential µB (≈ 728 MeV) are taken
from the parameterization of Ref. [40] which can reasonably describe the measured yields of
pion, kaon, proton and hyperons in the central heavy-ion collisions. All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. The canonical thermal model reproduces the observed yield ratios but
overpredicts the absolute hyper-nuclei yields.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Summary of Key Results
The STAR experiment reports the first measurement of the 4ΛHe hyper-nuclei yield as a function of rapidity and transverse momentum in 0–50% central Au+Au collisions at √sNN = 3 GeV. The yield of 4ΛHe as a function of rapidity is consistent with that of 4ΛH and the rapiditydependent yield ratio of 4ΛHe/4ΛH is consistent with that of 3He/t. p. 0 5 standard deviations. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t.Where the paper says it
Yield Ratios and Interaction Probes
The ratio of 4ΛHe/4ΛH and 3He/t can be used to examine the interaction difference between 3He-Λ and t-Λ. The yield ratios of 4ΛHe/4ΛH and 3He/t given by the thermal model are shown by blue and green bands. p. 2 of 0–50%. Yield ratios of 4
ΛHe/4
ΛH and 3He/t are extracted, and the results are compared with
theoretical results by the JAM plus coalescence afterburner and the thermal model. of 0–50%. Yield ratios of 4
ΛHe/4
ΛH and 3He/t are extracted, and the results are compared with
theoretical results by the JAM plus coalescence afterburner and the thermal model. 5 standard deviations. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t. 5 standard deviations. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Model Consistency
With a common set of coalescence parameters for both 3He-Λ and t-Λ, calculations from the transport model JAM plus coalescence afterburner can reproduce both the yield and mean pT distributions for 4ΛHe and 4ΛH. Both model calculations agree with the measurements reasonably well. p. 0 All the measurements, as
well as the transverse-momentum spectra, can be reasonably described by the JAM with a
coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei
at this energy. The canonical thermal model reproduces the observed yield ratios but
overpredicts the absolute hyper-nuclei yields.Where the paper says it
Final Conclusion
The STAR experiment reports the first measurement of hyper-nuclei 4ΛHe yield from the √sNN = 3 GeV 0–50% Au+Au collisions at RHIC. The rapidity dependence of dN/dy and ⟨pT⟩ are consistent with those of 4ΛH from the same collision system. p. 9 The
branching ratio uncertainty is also considered as a source of systematic errors. It is found that
for both 4
ΛHe and 4
ΛH, the dN/dy values decrease from target rapidity to mid rapidity, which
follows from the monotonic decrease of light nuclei dN/dy in the same collision system [38]. 5 standard deviations. We find that
the yield of 4
ΛHe as a function of rapidity is consistent with that of 4
ΛH, and the rapiditydependent yield ratio of 4
ΛHe/4
ΛH is consistent with that of 3He/t. of 0–50%. Yield ratios of 4
ΛHe/4
ΛH and 3He/t are extracted, and the results are compared with
theoretical results by the JAM plus coalescence afterburner and the thermal model.Where the paper says it
Where the paper says it
Where the paper says it
The ratio of 4ΛHe/4ΛH and 3He/t can be used to examine the interaction difference between 3He-Λ and t-Λ. The yield ratios of 4ΛHe/4ΛH and 3He/t given by the thermal model are shown by blue and green bands. It is found that within statistical and systematic uncertainties, yields of 4ΛHe at different rapidities are consistent with those of 4ΛH, and yield ratios of 4ΛHe/4ΛH are consistent with those of 3He/t. The model results from JAM plus coalescence afterburner are shown to be consistent with the experimental data with respect to both dN/dy and ⟨pT⟩. p. 6 As a comparison, the transport model JAM [32, 33] with coalescence
afterburner predictions are shown as blue bands. The model predictions are consistent with
the experimental data, except for the mid rapidity region where data points are systematically
lower.Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI system can accurately predict hyper-nuclei yields by incorporating coalescence afterburner models alongside thermal model predictions, as this combination
reproduce both the yield and mean pT distributions for 4ΛHe and 4ΛH
. -
Improved AI system can utilize measured yield ratios to probe the interaction between different hyperon systems, specifically using
yield ratios of 4ΛHe/4ΛH and 3He/t can be used as measurable quantities to probe the interaction between 3He-Λ and t-Λ.
-
Improved AI system can better constrain nuclear matter equation of state (EoS) models by incorporating experimental constraints derived from hyper-nuclei data, which is important because
the appearance of Λ hyperon would significantly soften the nuclear matter equation of state (EoS), which contradicts the observations of the neutron star with about 2 solar mass.
-
Improved AI system can perform systematic uncertainty propagation more robustly by varying topological variable cuts and extrapolation functions, as these sources are noted as dominating uncertainties for both dN/dy and pT measurements.
-
Improved AI system can distinguish between production mechanisms by analyzing the sensitivity of yield ratios to interaction differences, noting that
yield ratios of 4ΛHe/4ΛH and 3He/t can be used to examine the interaction difference between 3He-Λ and t-Λ.
Abstract
The STAR experiment reports the first measurement of the 4 Λ hyper-nuclei yield as a function of rapidity and transverse momentum in 0-50% central Au+Au collisions at sqrt s = 3 GeV. The 4 Λ is reconstructed through its three-body decay channel, 4 Λ to cubed + + π-, with a statistical significance of about 9.5 standard deviations. We find that the yield of 4 Λ as a function of rapidity is consistent with that of 4 Λ, and the rapidity-dependent yield ratio of 4 Λ / 4 Λ is consistent with that of cubed He/t. All the measurements, as well as the transverse-momentum spectra, can be reasonably described by the JAM with a coalescence afterburner, suggesting a coalescence-based formation scenario for hyper-nuclei at this energy. The canonical thermal model reproduces the observed yield ratios but overpredicts the absolute hyper-nuclei yields.
Sources
- Chiral effective field theory and nuclear forces
- Hyperon-nucleon interaction within chiral effective field theory revisited
- Measurements of the lightest hypernucleus ($\mathrm{^3_{\Lambda}H}$): progress and perspective
- Hypernuclear Physics for Neutron Stars
- The Hyperon Puzzle in Neutron Stars
- Hyperon-nucleon three-body forces and strangeness in neutron stars
- Hyperon Puzzle: Hints from Quantum Monte Carlo Calculations
- Properties of the QCD Matter -- An Experimental Review of Selected Results from RHIC BES Program
- Dynamical mechanisms for deuteron production at mid-rapidity in relativistic heavy-ion collisions from SIS to RHIC energies
- Unveiling the dynamics of nucleosynthesis in relativistic heavy-ion collisions
- Decoding the phase structure of QCD via particle production at high energy
- The STAR Time Projection Chamber: A Unique Tool for Studying High Multiplicity Events at RHIC
Related papers
- Regularity of core coupled high-spin structure in neutron-rich 196-202 Au isotopes approaching N =126
- Precise and accurate nuclear electric quadrupole moment of 223 Ra from molecular spectroscopy
- A pathway towards decentralized studies of radioactive post-lead elements and their applications in beyond standard model physics
- Analysis of Xe-131 Prompt Gammas
- Probing the initial geometry and the onset of collectivity with anisotropic flow in light-ion collisions with ALICE at the LHC
- Heavy-Quark Dynamics from D 0-Meson Anisotropy-Response Scaling Violations