Localized oscillations of an Euler--Bernoulli beam with time-varying parameters on a visco-elastic foundation: asymptotics, adiabatic invariant, and equivalent Hamiltonian system
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Mathematical Physics. The day in mathematical physics: rigorous models of physical systems.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Localized oscillations of an Euler--Bernoulli beam with time-varying parameters on a visco-elastic foundation".
Mira: Here's the gist of the paper. Localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator is studied using various analytic approaches that yield the same formula for the amplitude of oscillation in both conservative and dissipative cases.
Kai: Mathematical Formulation The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator is governed by a specific equation involving time-varying parameters such as flexural stiffness and mass density.
Mira: The problem is formulated equivalently with zero right-hand side for spatial coordinates other than zero and four boundary conditions at the point x=0.
Kai: The total energy of the beam is defined as a sum of kinetic and potential energy terms involving the mass density, flexural stiffness, and foundation stiffness.
Paper summary: Kai: Looking at this whole piece again, the title itself tells you a lot about what they are tackling: localized oscillations of an Euler--Bernoulli beam with time-varying parameters on a visco-elastic foundation. It really summarizes the physical setup they built for their study.
Mira: And it's interesting how they bring in the concepts of asymptotics, adiabatic invariance, and the equivalent Hamiltonian system to analyze this problem. They show that even though these are different mathematical tools, for this specific setup, all three end up giving you that same formula for the amplitude of oscillation.
Lev: So what does that convergence mean for us on a practical level? It means we don't have to pick one method and hope it works; if we can find a physical system where these conditions hold—like slow variation of parameters—we get the same result regardless of which mathematical tool you choose to use.
Kai: Exactly. And they also confirm that for the non-dissipative case, they get a specific formula for the amplitude, and they also confirm that their Hamiltonian system method works even for complicated systems where standard asymptotic approaches are really difficult to apply.
Mira: And the important part is what it implies about how we look at these complex dynamics. It shows that finding an equivalent Hamiltonian system can be useful when applying a straightforward asymptotic approach is proving too hard. That's a big statement about the power of that framework for analysis.
Lev: From my side, it’s still about translation to hardware feasibility. If this mathematical framework gives us a simple way to find these modes, we need to ensure that the actual simulation or measurement overhead doesn't make it too slow for real-time feedback on those oscillations.
Kai: So the main thing is that they've provided these formulas, like the one for C zero at zero time, which they state is C0 equals sqrt(two) times p eight over k minus rho omega squared sub zero times three rho root four B plus root two M p four k minus rho omega squared sub zero times T equals zero.
Mira: Yeah, that specific formula for the amplitude, C0, that they derive, is what they use to describe this localized oscillation of the Euler--Bernoulli beam on a visco-elastic foundation and its coupling with a discrete oscillator. It’s their main takeaway result.
Lev: So it's essentially showing that for this specific problem, these different mathematical frameworks all lead to the same description of the system's response, which is what we need when building systems that have complex dynamics running on real hardware.
Conclusion: Kai: So we're wrapping up this paper on localized oscillations of an Euler--Bernoulli beam on a visco-elastic foundation with time-varying parameters and it’s all about how different math tools—asymptotics, adiabatic invariance, and the Hamiltonian system—all point to the same amplitude formula for those wiggles.
Mira: Yeah, the authors are showing that when you have properties changing slowly over time and you’re on a foundation with damping, these different approaches converge on one single description of how big those localized oscillations get.
Lev: What this means practically is that if you can find a physical system where those slow changes happen, like if you tune the beam stiffness over time in a controlled way, you don't have to worry about which complex math method to use; the result for that amplitude stays the same.
Kai: They really prove that finding an equivalent Hamiltonian system is useful when using those standard asymptotic methods gets too messy for complicated systems. It’s like having a backup plan when your primary calculation hits a wall.
Mira: And they also confirm that for the non-dissipative case, they get that specific amplitude formula involving the terms p eight over k minus rho omega squared sub zero times three rho root four B plus root two M p four k minus rho omega squared sub zero times T equals zero. That’s a concrete number describing those oscillations at large times.
Lev: So yeah, the convergence is solid for that specific setup, but we still have to figure out how much computational overhead it takes to actually run that equivalent Hamiltonian system on real hardware compared to just using the invariant formula they derived earlier.
Kai: That’s right, we need those numbers on how much processing power this requires before we can really talk about building something functional for a lab testbed.
Mira: It shows that understanding the underlying physical assumptions—like the slow variation and the adiabatic invariance—is just as important as finding the final amplitude formula itself.
Lev: Next up, we need to see what those real-world constraints are for simulating this kind of time-varying system in a real quantum or classical environment.
Institute for Problems in Mechanical Engineering RAS
math-ph, math.MP, physics.class-ph
Submitted: 2026-06-21
Updated: 2026-11-05
Comments: 15 pages, 1 figure
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 81/100
The gist: Localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator is studied using various analytic approaches that yield the same formula for…
Key concepts
- Euler–Bernoulli beam on a visco-elastic foundation
- This describes a beam structure whose stiffness and mass properties change with time, resting on a foundation that exhibits both elastic (spring-like) and viscous (damping) characteristics. The oscillation of the beam is influenced by these time-varying properties.
- Adiabatic Invariant
- This concept suggests that for certain systems, the action of a trapped wave remains constant even as the system parameters change slowly over time. This invariance allows researchers to find simple formulas for the oscillation amplitude by relating it to this conserved quantity.
- Equivalent Hamiltonian System
- This is a mathematical framework used to describe complex physical systems. Instead of solving the original difficult equations directly, this method reformulates the problem into a simpler system defined by generalized coordinates and impulses, making analysis easier.
Terminology
Summary
Localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator is studied using various analytic approaches that yield the same formula for the amplitude of oscillation in both conservative and dissipative cases. p. 0 3
4 Adiabatic invariant 5
5 Equivalent Hamiltonian system 6
6 Numerics 7
7 Conclusion 8
A The dispersion relation 8
B The Green function 9
C The spectral problem 9
D Inhomogeneous non-stationary problem 10
1 Introduction
In this paper we apply recently developed in Gavrilov et al. (2024); Shishkina and Gavrilov (2026) approaches to
the problem concerning localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a
damped discrete oscillator.Where the paper says it
Mathematical Formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator is governed by a specific equation involving time-varying parameters such as flexural stiffness and mass density. The problem is formulated equivalently with zero right-hand side for spatial coordinates other than zero and four boundary conditions at the point x=0. p. 1 1) with zero
right-hand side for x ̸= ±0:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ = 0 (2. 2)
and four boundary conditions at x = 0:
[w] = 0, (2. 2 Mathematical formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator
is governed by the following equation:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ =
p(t) −
Mw˙
·
− Kw − 2ϵΓw˙
δ(x). 1)
Here w(x, t) is the displacement, B = B(ϵt) is the flexural stiffness, ρ = ρ(ϵt) is the mass density of the beam, ϵγ(ϵt)
is the damping in the foundation, M = M(ϵt) is the value of mass in the discrete oscillator, K = K(ϵt) is the stiffness
for the discrete oscillator, k = k(ϵt) is the stiffness for the Winkler foundation, ϵΓ(ϵt) is the damping in the oscillator,
p(t) is the given external force on the beam, x is the spatial coordinate, t is time, ϵ is a formal small parameter.Where the paper says it
Where the paper says it
Asymptotic Analysis
The authors employ an asymptotic ansatz for the solution under assumptions that include slow variation in time and smallness of a formal parameter epsilon. The first-order approximation equation derived by substituting the ansatz into the governing equation at x → 0 is given by a complex expression involving various system parameters. p. 3 8) into the governing equation (2. 2) at x → 0 and equating the coefficients of like
powers ϵ, one obtains that to the first-order approximation:
4Bω3W0
′
X + 6Bω2ω
′
XW0 + ρ
2Ω0W0
′
T + Ω0
′
T W0
+ Ω0ρ
′
T W0 + 2γΩ0W0 = 0. 2) at x → 0 and equating the coefficients of like
powers ϵ, one obtains that to the first-order approximation:
4Bω3W0
′
X + 6Bω2ω
′
XW0 + ρ
2Ω0W0
′
T + Ω0
′
T W0
+ Ω0ρ
′
T W0 + 2γΩ0W0 = 0. 19)
The corresponding first-order approximations of boundary conditions (2.Where the paper says it
Where the paper says it
Adiabatic Invariant and Hamiltonian System
For the non-dissipative case, the paper demonstrates that the action of the trapped wave is an adiabatic invariant by postulating its constancy. This invariance leads to a formula for the amplitude proportional to a quantity involving system parameters and frequency terms. p. 0 Namely, these are asymptotics, the method based on the adiabatic invariance
of the action of a trapped wave, and the consideration of the equivalent Hamiltonian system. All approaches result in
the same formula for the amplitude of oscillation. 2)
is the corresponding Hamiltonian,
Q = U, P = M
dU
dt
(5. 3)
are the generalized co-ordinate and the generalized impulse, respectively. 5)
are the effective mass and the effective stiffness, respectively; |C0| is defined by Eq. The evolution of the amplitude U can be found by the WKB approach.Where the paper says it
Where the paper says it
Where the paper says it
Spectral Problem and Non-Stationary Response
The spectral problem for the unperturbed system yields a dispersion relation where the wave number omega is given by two roots, omega = ωδ = a(i + δ). The solution at x=0 for the amplitude W(0) is derived from this spectral analysis. p. 8 Put p = 0 and search the solution in the form of Eq. For the amplitude W(x) one obtains
Eq. We also require the frequency equation for the trapped mode and the dispersion relation at x = ±0 hold for all t. We
use the following asymptotic ansatz:
w(x, t) = H(T)
X
δ=±1
Wδ
(X, T) exp ϕ
δ + c. 12), one gets
w(0, t) = 4|A|H(T)A(T) exp (−D(T)) cos π
4
cos(ψ − arg A) + O(ϵ) (3. 35)
where
ψ ≡
Z t
0
Ω0(ϵtˆ) dt.Where the paper says it
Where the paper says it
Where the paper says it
Conclusion
The most important results are the formulas describing localized oscillation of an Euler-Bernoulli beam lying on the visco-elastic foundation and coupled with a discrete oscillator. The method of the equivalent Hamiltonian system can be obtained for complicated systems where application is the asymptotic approach is a difficult task. p. 7 (2024); Shishkina and
Gavrilov (2026) for the analogous problem concerning localized oscillation of a string. This confirms that the method
of the equivalent Hamiltonian system can be obtained for complicated systems where application is the asymptotic
approach is a difficult task. (2024); Shishkina and
Gavrilov (2026) for the analogous problem concerning localized oscillation of a string. This confirms that the method
of the equivalent Hamiltonian system can be obtained for complicated systems where application is the asymptotic
approach is a difficult task. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. where
A(T) =
p8
k − ρΩ2
q
0
Ω0
3ρ
√4 B +
√
2M
p4
k − ρΩ2
0
, (3. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . where
A(T) =
p8
k − ρΩ2
q
0
Ω0
3ρ
√4 B +
√
2M
p4
k − ρΩ2
0
, (3. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT .Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The dispersion relation
Here we consider the corresponding stationary unperturbed problem with constant parameters and zero dissipation. The dispersion relation for the operator in the left-hand side of the above equation is Bρω4 + Ω2∗ − Ω2 = 0. p. 7 1) one gets
−Ω
2
ρW + BW′′′′ + kW =
p(t) + MΩ
2W(0) − KW(0)
δ(x). 3)
The dispersion relation for the operator in the left-hand side of the above equation is
B
ρ
ω
4 + Ω2
∗ − Ω
2 = 0, (A. 4)
where ω is the wave-number. We treat the right part of the beam x > 0, therefore, we consider the two roots of the
dispersion given by expression
ω = ω
δ = a(i + δ). 4)
where ω is the wave-number. We treat the right part of the beam x > 0, therefore, we consider the two roots of the
dispersion given by expression
ω = ω
δ = a(i + δ). 4)
where ω is the wave-number. We treat the right part of the beam x > 0, therefore, we consider the two roots of the
dispersion given by expression
ω = ω
δ = a(i + δ).Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The Green function
Consider equation ρG¨ + BG′′′′ + kG = exp(−iomegat)δ(x) for x > 0. The expression for the Green function (B. p. 8 6), one has
W =
(1 − i)√
2
8B1/4ρ
3/4(Ω2
∗ − Ω2)
3/4
. 9)
Expression for the Green function (B. 9)
Expression for the Green function (B. 2) can be transformed to the following equivalent form:
G(x, Ω) =
√
2
8Ba3
exp(−ax) cos
ax −
π
4
, (B.Where the paper says it
Where the paper says it
The spectral problem
For the amplitude W(x), one obtains Eq. (A.3) where p = 0. The form of free oscillations at Ω = Ω0 for x > 0 can be calculated as follows w(x, t) = CG˜ (x, Ω) exp(−iΩ0t) + c. p. 9 7)
K
M
≤ Ω
2
0 ≤
k
ρ
, K ≥ 0. 8)
The form of free oscillations at Ω = Ω0 for x > 0 can be calculated as follows:
w(x, t) = CG˜ (x, Ω) exp(−iΩ0t) + c. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . 33)
Here A is an arbitrary complex constant. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . 33)
Here A is an arbitrary complex constant. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . 33)
Here A is an arbitrary complex constant.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Inhomogeneous non-stationary problem
The solution of Eq. (D.6) yields w(0, τ) = 1/2π Z +∞−∞ pF (omega) exp−iΩτ domega / K − Momega2 + 2√2B1/4ρ3/4(Ω2∗ − Ω2)3/4. p. 9 4)
Expressing wF (0, Ω) from the above equation we get
wF (0, Ω) = pF (Ω)
K − MΩ2 + 2√
2B1/4ρ
3/4(Ω2
∗ − Ω2)
3/4
. 5)
The inverse transform of wF (0, Ω) yields
w(0, τ ) = 1
2π
Z +∞
−∞
pF (Ω) exp−iΩτ dΩ
K − MΩ2 + 2√
2B1/4ρ
3/4(Ω2
∗ − Ω2)
3/4
. 4)
Expressing wF (0, Ω) from the above equation we get
wF (0, Ω) = pF (Ω)
K − MΩ2 + 2√
2B1/4ρ
3/4(Ω2
∗ − Ω2)
3/4
. 5)
The inverse transform of wF (0, Ω) yields
w(0, τ ) = 1
2π
Z +∞
−∞
pF (Ω) exp−iΩτ dΩ
K − MΩ2 + 2√
2B1/4ρ
3/4(Ω2
∗ − Ω2)
3/4
. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. Here we consider the modes corresponding to the frequencies from the discrete part of the
spectrum (the trapped modes), which lies below the cut-off frequency Ω∗:
0 < |Ω| < Ω∗. 1)
In what follows we demonstrate that in the problem under consideration the only one trapped mode can exist. 35)
where
ψ ≡
Z t
0
Ω0(ϵtˆ) dt. 36)
For X → 0 and T → 0, the leading-order term of Eq. 35)
where
ψ ≡
Z t
0
Ω0(ϵtˆ) dt. 36)
For X → 0 and T → 0, the leading-order term of Eq.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
References
M V Fedoryuk Metod perevala [The Saddle-Point Method] Nauka [Science], Moscow, 1977. S N Gavrilov Non-stationary problems in dynamics of a string on an elastic foundation subjected to a moving load Journal of Sound and Vibration, 222(3):345–361. p. 0 3
4 Adiabatic invariant 5
5 Equivalent Hamiltonian system 6
6 Numerics 7
7 Conclusion 8
A The dispersion relation 8
B The Green function 9
C The spectral problem 9
D Inhomogeneous non-stationary problem 10
1 Introduction
In this paper we apply recently developed in Gavrilov et al. (2024); Shishkina and Gavrilov (2026) approaches to
the problem concerning localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a
damped discrete oscillator. 2 Mathematical formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator
is governed by the following equation:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ =
p(t) −
Mw˙
·
− Kw − 2ϵΓw˙
δ(x). 1)
Here w(x, t) is the displacement, B = B(ϵt) is the flexural stiffness, ρ = ρ(ϵt) is the mass density of the beam, ϵγ(ϵt)
is the damping in the foundation, M = M(ϵt) is the value of mass in the discrete oscillator, K = K(ϵt) is the stiffness
for the discrete oscillator, k = k(ϵt) is the stiffness for the Winkler foundation, ϵΓ(ϵt) is the damping in the oscillator,
p(t) is the given external force on the beam, x is the spatial coordinate, t is time, ϵ is a formal small parameter. And finally, only the asymptotic approach was used in Shishkina et al. (2019), whereas two additional analytic techniques, namely, the method based on the adiabatic invariance of the action of a trapped wave, and the consideration of
the equivalent Hamiltonian system, are utilized in the current paper in the non-dissipative case. 3
4 Adiabatic invariant 5
5 Equivalent Hamiltonian system 6
6 Numerics 7
7 Conclusion 8
A The dispersion relation 8
B The Green function 9
C The spectral problem 9
D Inhomogeneous non-stationary problem 10
1 Introduction
In this paper we apply recently developed in Gavrilov et al. (2024); Shishkina and Gavrilov (2026) approaches to
the problem concerning localized oscillation of an Euler–Bernoulli beam on a visco-elastic foundation coupled to a
damped discrete oscillator. To discretize PDE (2. 2) in the particular case under investigation, we use the following scheme Strikwerda (2004):
w
i+1
j − 2w
i
j + w
i−1
j
(∆t)
2
+
w
i
j+2 − 4w
i
j+1 + 6w
i
j − 4w
i
j−1 + w
i
j−2
(∆x)
4
+
u
i+1
j + u
i−1
j
2
= 0, (6. 6)
Here, and in what follows, [µ] ≡ µ(ξ + 0) − µ(ξ − 0) for any arbitrary quantity µ. The initial conditions can be
formulated in the following form Vladimirov (1971):
w
t<0
≡ 0.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
The equivalent Hamiltonian system
For the problem under consideration the equivalent Hamiltonian system is P˙ = −∂H/∂Q, Q˙ = ∂H/∂P. The coefficients M and K are defined as M(ϵt) = 1/Ω0(ϵt)C0(ϵt) and K(ϵt) = M(ϵt)Ω20 (5. p. 5 3)
are the generalized co-ordinate and the generalized impulse, respectively. The coefficients M and
M(ϵt) = 1
Ω0(ϵt)|C0(ϵt)|
, (5. The evolution of the amplitude U can be found by the WKB approach. One has Shishkina and Gavrilov (2026):
U(t) = |C(ϵt)| cos ψ − arg C
+ o(1), (5.Where the paper says it
Where the paper says it
Where the gains come from
The formula for J = const is obtained by assuming that the action of the trapped wave J = E¯w / Ω0 is an adiabatic invariant. This leads to C ∝ p8 / (k − ρomega20) (√2M p4 k − ρomega20 + 3ρ√4 B). p. 4 where
A(T) =
p8
k − ρΩ2
q
0
Ω0
3ρ
√4 B +
√
2M
p4
k − ρΩ2
0
, (3. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . 40) we get the following formula:
C ∝
p8
1 − Ω2
√
0
Ω0
(3. 42)
that is in agreement with the main result of the previous paper Shishkina et al. 8)
|C0| = |C0(ϵt)|
def =
1
√
MΩ0
, (5. , we again obtain the second formula in Eq. 5)
are the effective mass and the effective stiffness, respectively; |C0| is defined by Eq. The evolution of the amplitude U can be found by the WKB approach. 7)
arg C = arg C(0), arg C0 = arg C0(0), (5. 8)
|C0| = |C0(ϵt)|
def =
1
√
MΩ0
, (5. 2 Mathematical formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator
is governed by the following equation:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ =
p(t) −
Mw˙
·
− Kw − 2ϵΓw˙
δ(x). 1)
Here w(x, t) is the displacement, B = B(ϵt) is the flexural stiffness, ρ = ρ(ϵt) is the mass density of the beam, ϵγ(ϵt)
is the damping in the foundation, M = M(ϵt) is the value of mass in the discrete oscillator, K = K(ϵt) is the stiffness
for the discrete oscillator, k = k(ϵt) is the stiffness for the Winkler foundation, ϵΓ(ϵt) is the damping in the oscillator,
p(t) is the given external force on the beam, x is the spatial coordinate, t is time, ϵ is a formal small parameter. 35)
where
ψ ≡
Z t
0
Ω0(ϵtˆ) dt. 36)
For X → 0 and T → 0, the leading-order term of Eq.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
A The dispersion relation
The dispersion relation for the operator in the left-hand side of the above equation is Bρω4 + Ω2∗ − Ω2 = 0. The two roots of the dispersion given by expression are omega = ωδ = a(i + δ).
B The Green function
The expression for the Green function (B.10) can be transformed to the following equivalent form G(x, Ω) = √28Ba3 exp(-ax) cos ax − π/4. p. 8 9)
Expression for the Green function (B. 2) can be transformed to the following equivalent form:
G(x, Ω) =
√
2
8Ba3
exp(−ax) cos
ax −
π
4
, (B. 9)
Expression for the Green function (B. 2) can be transformed to the following equivalent form:
G(x, Ω) =
√
2
8Ba3
exp(−ax) cos
ax −
π
4
, (B.Where the paper says it
Where the paper says it
C The spectral problem
The form of free oscillations at Ω = Ω0 for x > 0 can be calculated as follows w(x, t) = CG˜ (x, Ω) exp(−iΩ0t) + c.c., where C˜ is an arbitrary complex constant.
D Inhomogeneous non-stationary problem
The solution of Eq. (D.6) yields w(0, τ) = 1/2π Z +∞−∞ pF (omega) exp−iΩτ domega / K − Momega2 + 2√2B1/4ρ3/4(Ω2∗ − Ω2)3/4. For the large times, the non-stationary response of the system under consideration is undamped oscillations with the trapped mode frequency Ω0. The asymptotic order of the error term in formula (D.7) depends on the properties of pF. The final amplitude is given by C0(0) = sqrt(2)p8 / (k − ρomega20) (3ρ√4 B + √2M p4 k − ρomega20) T = 0. The argument of C is arg C(0) = arg pF Ω0(0) + arg C0(0), (D. p. 4 12), one gets
w(0, t) = 4|A|H(T)A(T) exp (−D(T)) cos π
4
cos(ψ − arg A) + O(ϵ) (3. 35)
where
ψ ≡
Z t
0
Ω0(ϵtˆ) dt. 34)
Now according to Eqs. 12), one gets
w(0, t) = 4|A|H(T)A(T) exp (−D(T)) cos π
4
cos(ψ − arg A) + O(ϵ) (3. The evolution of the amplitude U can be found by the WKB approach. One has Shishkina and Gavrilov (2026):
U(t) = |C(ϵt)| cos ψ − arg C
+ o(1), (5.Where the paper says it
Where the paper says it
Where the paper says it
The most important results are Eqs. (3.37)–(3.40) describing localized oscillation of an Euler-Bernoulli beam lying on the visco-elastic foundation and coupled with a discrete oscillator. p. 7 17)
7 Conclusion
The most important results of the paper are Eqs. 40) describing localized oscillation of an Euler-Bernoulli
beam lying on the visco-elastic foundation and coupled with a discrete oscillator. 40) describing localized oscillation of an Euler-Bernoulli
beam lying on the visco-elastic foundation and coupled with a discrete oscillator. Another important result is that, for
the non-dissipative case, we again get formula (5. Another important result is that, for
the non-dissipative case, we again get formula (5. 10) that was previously obtained Gavrilov et al. 10) that was previously obtained Gavrilov et al. (2024); Shishkina and
Gavrilov (2026) for the analogous problem concerning localized oscillation of a string. (2024); Shishkina and
Gavrilov (2026) for the analogous problem concerning localized oscillation of a string. This confirms that the method
of the equivalent Hamiltonian system can be obtained for complicated systems where application is the asymptotic
approach is a difficult task. The evolution of the amplitude U can be found by the WKB approach. One has Shishkina and Gavrilov (2026):
U(t) = |C(ϵt)| cos ψ − arg C
+ o(1), (5. The evolution of the amplitude U can be found by the WKB approach. One has Shishkina and Gavrilov (2026):
U(t) = |C(ϵt)| cos ψ − arg C
+ o(1), (5. 2 Mathematical formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator
is governed by the following equation:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ =
p(t) −
Mw˙
·
− Kw − 2ϵΓw˙
δ(x). 1)
Here w(x, t) is the displacement, B = B(ϵt) is the flexural stiffness, ρ = ρ(ϵt) is the mass density of the beam, ϵγ(ϵt)
is the damping in the foundation, M = M(ϵt) is the value of mass in the discrete oscillator, K = K(ϵt) is the stiffness
for the discrete oscillator, k = k(ϵt) is the stiffness for the Winkler foundation, ϵΓ(ϵt) is the damping in the oscillator,
p(t) is the given external force on the beam, x is the spatial coordinate, t is time, ϵ is a formal small parameter. where
A(T) =
p8
k − ρΩ2
q
0
Ω0
3ρ
√4 B +
√
2M
p4
k − ρΩ2
0
, (3. 32)
D(T) = Z T
0
3
√4 Bγ +
√
2Γ
p4
k − ρΩ2
0
3
√4 Bρ +
√
2M
p4
k − ρΩ2
0
dT . 4 Adiabatic invariant
In the rest of the paper, we deal with the non-dissipative case
Γ = 0, γ = 0. 1)
Let us show that formula describing the evolution of the amplitude for the trapped wave can be obtained by postulating that the action of the trapped wave
J =
E{w¯}
Ω0
C=C
(4. 2 Mathematical formulation
The transverse oscillation of an Euler–Bernoulli beam on the Winkler foundation with an embedded discrete oscillator
is governed by the following equation:
(ρw˙)
· + Bw′′′′ + kw + 2ϵγw˙ =
p(t) −
Mw˙
·
− Kw − 2ϵΓw˙
δ(x). 1)
Here w(x, t) is the displacement, B = B(ϵt) is the flexural stiffness, ρ = ρ(ϵt) is the mass density of the beam, ϵγ(ϵt)
is the damping in the foundation, M = M(ϵt) is the value of mass in the discrete oscillator, K = K(ϵt) is the stiffness
for the discrete oscillator, k = k(ϵt) is the stiffness for the Winkler foundation, ϵΓ(ϵt) is the damping in the oscillator,
p(t) is the given external force on the beam, x is the spatial coordinate, t is time, ϵ is a formal small parameter.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Here we consider the corresponding stationary unperturbed problem with constant parameters and zero dissipation. The two roots of the dispersion given by expression are omega = ωδ = a(i + δ).
The expression for the Green function (B.10) can be transformed to the following equivalent form G(x, Ω) = √28Ba3 exp(-ax) cos ax − π/4.
The form of free oscillations at Ω = Ω0 for x > 0 can be calculated as follows w(x, t) = CG˜ (x, Ω) exp(−iΩ0t) + c.c., where C˜ is an arbitrary complex constant.
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Improved AI can accurately predict localized oscillation amplitudes of an Euler-Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator by employing three analytic approaches: asymptotics, method based on the adiabatic invariance of the action of a trapped wave, and consideration of the equivalent Hamiltonian system.
-
The improved system can obtain the amplitude of oscillation using only the asymptotic approach in dissipative cases, while for non-dissipative cases, it can utilize both methods to ensure accuracy beyond just asymptotics.
-
The system can solve complex non-stationary problems by formulating an equivalent Hamiltonian system with a generalized coordinate Q and generalized impulse P, where the effective mass M and stiffness K are derived from the parameters of the system at time t.
Abstract
We consider localized oscillations of an Euler--Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator. All system parameters vary slowly and independently in time. For the conservative case, we employ three different analytical approaches: an asymptotic method, a technique based on the adiabatic invariance of the action of a trapped wave, and an analysis of the equivalent Hamiltonian system. All three approaches yield the identical formula for the oscillation amplitude. In the dissipative case, the oscillation amplitude is obtained solely via the asymptotic approach. Finally, we validate our analytical findings against numerical simulations, demonstrating excellent agreement.
Sources
Related papers
- Existence of a fluid phase for the two-dimensional one-component plasma
- The Huang-Yang conjecture for the low-density Fermi gas
- Anderson localisation in infinite and finite resonator crystals with long-range interactions
- Free energy and spectral edge of the SYK model
- Anderson localization for 1-d quasi-periodic Schr"odinger operators with degenerate weights
- Irregular SLE(4) martingales and isomonodromic deformations