Scalar diquark mass and quark--diquark potential from lattice QCD using the potential method with a static quark

arXiv:2606.19840 · hep-lat, hep-ph, nucl-th · Submitted 2026-06-18 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: We're looking at the paper: "Scalar diquark mass and quark--diquark potential from lattice QCD using the potential method with a static quark".

Mira: Here's the gist of the paper. We study the scalar diquark mass and quark–diquark potential by applying a HAL QCD-inspired potential method to a baryonic system composed of a scalar diquark and a static quark The diquark mass is determined self-consistently by requiring that the pwave baryonic spectrum obtained from two-point correlators be reproduced within the potential framework.

Kai: The authors developed an improved framework to avoid systematic uncertainty by replacing the charm quark in the quark–diquark system with a static color source.

Mira: Within this potential framework, the diquark mass appears as a parameter in the quark–diquark Hamiltonian and is determined self-consistently together with the effective nonrelativistic potential.

Kai: The diquark mass is determined by matching the baryonic masses in the P-wave sector obtained by solving Eq.

Title and authors: Mira: This paper, "Scalar diquark mass and quark--diquark potential from lattice QCD using the potential method with a static quark", is essentially about quantifying the properties of the scalar diquark inside a baryon by using a specific potential approach. They are looking at how this relates to the underlying structure of QCD.

Kai: They focus on determining two things: first, that scalar diquark mass, and second, the resulting quark--diquark potential itself. The core idea is using this potential method to find the diquark mass by matching it against observable pwave spectra from two-point correlators.

Lev: So, what they are doing here is testing a specific model framework against actual lattice QCD data for a system with a static quark and a scalar diquark. It’s like checking if the rules of that potential work when you feed them real data.

Mira: They are using two plus one flavor gauge configurations generated by the PACS-CS Collaboration on their L three times T equals three hundred twenty three times sixty four lattice, which is quite a substantial setup for this kind of study <ref:2606.19840#pg1,gauge configurations generated by the PACS-CS Collaboration on>.

Kai: And they mention specific parameters for their calculations: a lattice spacing derived from beta equal to six over g squared equal to one point nine and a pion mass around seven hundred two mega electron volts. These details tell us exactly how the simulations were run and what scale they are looking at.

Lev: Those lattice spacings and simulation setups are crucial because they define the resolution of their calculations, so we have to keep an eye on those discretization errors when we think about applying this to real hardware or error correction protocols.

Kai: They also mention that the string tension they extract from the quark--diquark potential is about four hundred seventy five mega electron volts, which they compare to the value from a static quark--antiquark potential, or Wilson Loop calculation.

The paper's summary: Mira: So, summarizing what this paper is doing, it’s applying a HAL QCD-inspired potential method to a baryonic system made of a scalar diquark and a static quark. They are determining the diquark mass by requiring that the pwave spectrum they get from two-point correlators matches what the potential framework predicts.

Kai: The key result here is that they find this scalar diquark mass is close to the naive constituent quark estimate, which is about two thirds of a nucleon mass. That's a significant piece of information for understanding how these diquarks behave in nature.

Lev: Being close to the naive estimate suggests that the attractive forces in this system are behaving somewhat as expected from simple models, but we have to remember that this closeness depends heavily on the assumptions built into their effective Hamiltonian.

Mira: They also establish a quark--diquark potential that looks like a Cornell type potential, which is just Coulomb plus linear confinement. The string tension they get from this potential matches the static quark--antiquark potential within about five percent, which is a pretty good agreement for a model result.

Kai: So it’s not just finding one number; they are building a complete picture where they determine both the mass and the potential simultaneously in this improved framework. They are showing how this method can work without needing to fix an external quark mass parameter.

The paper's improvements: Lev: The main improvement they highlight is replacing the charm quark with a static color source in their effective Hamiltonian. This avoids the systematic uncertainty that comes from having to choose a specific charm quark mass for the calculation, which was a major issue before.

Mira: That modification lets them determine the quark--diquark interaction potential and the diquark mass without depending on that external choice, which is a big deal because it makes their determination much more robust. It also allows them to disentangle the diquark mass from other energy contributions in the total energy of the baryon-like system.

Kai: So, they are not just getting a better number; they are developing a framework where you can separate the diquark mass from other things that contribute to the total baryon energy, which gives us a clearer picture of what’s going on dynamically inside these systems.

Lev: From my side, I see this separation as something that could translate well to real hardware because if we know how much energy is coming from the diquark mass versus the interaction energy, it helps us isolate noise or systematic errors in our measurements.

Mira: And they use this improved framework specifically to perform a lattice QCD study of the scalar "good" diquark, giving them quantitative insight into its dynamics. It’s a focused approach that addresses the conceptual difficulty of extracting these masses from correlators more directly.

Conclusion: Kai: So, to wrap up on this paper, they used this improved method to find the scalar diquark mass and the quark--diquark potential using lattice QCD simulations. They found a diquark mass around zero point nine three one GeV, which is pretty close to that naive constituent quark estimate of one point zero five GeV.

Mira: And they confirmed that their resulting quark--diquark potential has a Cornell type form, and the string tension they got, four hundred seventy five mega electron volts, matches the static quark--antiquark potential within about five percent. This agreement with the Wilson Loop calculation is pretty compelling evidence for the model's validity.

Lev: From an engineering view, having this level of agreement between two different ways of calculating that string tension gives us confidence in modeling confinement effects in these systems.

Kai: They also noted that their framework successfully reproduces the previously observed diquark mass hierarchy by interpreting odd parity states as predominantly zero plus diquarks in the pwave channel, which is a nice connection to experimental results.

Mira: And they leave the door open for future work, suggesting that they could systematically study mass splittings between one plus and zero plus diquarks in upcoming investigations. It’s a solid piece of work that sets a good baseline for what comes next.

Research Center for Nuclear Physics (RCNP), The University of Osaka

hep-lat, hep-ph, nucl-th

Submitted: 2026-06-18

Updated: 2026-11-04

Comments: 6 pages, 3 figures, published version

DOI: 10.1016/j.physletb.2026.141120

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 82/100

The gist: We study the scalar diquark mass and quark–diquark potential by applying a HAL QCD-inspired potential method to a baryonic system composed of a scalar diquark and a static quark The diquark mass is…

Key concepts

Scalar Diquark Mass (mD)
This is a key parameter representing the mass of a specific type of two-quark system called a scalar diquark. The authors determined this mass self-consistently by ensuring that their theoretical framework accurately reproduced the observed energy spectrum in the P-wave sector from lattice calculations.
Quark–Diquark Potential
This describes the force or interaction energy between a single quark and a scalar diquark. It was found to follow a Cornell-type form, which combines a short-range Coulombic interaction with a long-range linear confinement term, providing insight into how these components behave in QCD.
Static Color Source
Instead of using the charm quark directly in the calculation, the authors replaced it with a static color source. This simplification allowed them to avoid systematic uncertainties and focus on determining the diquark mass as a parameter within a Hamiltonian framework.
String Tension ($\sqrt{\sigma}$)
This quantity measures the strength of the confinement force between quarks, representing the linear term in the quark-diquark potential. The extracted value of $\sqrt{\sigma} = 475(6)$ MeV was found to be consistent within about 5% with values derived from other standard methods like Wilson Loops.

Terminology

Summary

We study the scalar diquark mass and quark–diquark potential by applying a HAL QCD-inspired potential method to a baryonic system composed of a scalar diquark and a static quark The diquark mass is determined self-consistently by requiring that the pwave baryonic spectrum obtained from two-point correlators be reproduced within the potential framework. p. 0

Methodology for Diquark Mass Determination

The authors developed an improved framework to avoid systematic uncertainty by replacing the charm quark in the quark–diquark system with a static color source. Within this potential framework, the diquark mass appears as a parameter in the quark–diquark Hamiltonian and is determined self-consistently together with the effective nonrelativistic potential. p. 0 The diquark mass is determined by matching the baryonic masses in the P-wave sector obtained by solving Eq. p. 1 (3) with those extracted from the corresponding two-point correlation functions. p. 1 Specifically, this involves determining mD as mD = ∆Ee / 2(εP − εS). p. 2

Extraction of the Quark–Diquark Potential

The quark–diquark central potential is obtained through V0(r) = 1/2mD Ve0(r) − mD + εS. The resulting quark-diquark potential is shown to be of Cornell-type, fitted with the form V(r) = -A r + σ r + C. p. 3 The extracted string tension agrees within approximately 5% with that obtained from the static quark–antiquark potential (Wilson Loop). p. 0

Determination of Key Parameters

The lattice QCD calculations were performed using 2 + 1 flavor gauge configurations generated by the PACS-CS Collaboration on a L3 ×T = 323 ×64 lattice. The setup utilized an Iwasaki gauge action at β = 6/g squared = 1. p. 29 and an O(a)-improved Wilson quark action. p. 2 The pion mass was found to be mπ ≈ 702 MeV. p. 0 The string tension extracted from the quark–diquark potential is √σ = 475(6) MeV. p. 4

Final Results and Interpretation

The scalar diquark mass obtained is mD = 0.931(7) GeV, which is close to the naive constituent-quark estimate, 2mN/3 ≈ 1. p. 305 GeV. The resulting baryon energy decomposition shows that mB = mD + Erem, where Erem contains both the quark–diquark interaction energy and the self-energy of the static quark. p. 4 The framework successfully reproduces previously observed diquark mass hierarchy by interpreting odd parity states as predominantly 0+ diquarks in the P-wave channel. p. 4 The analysis also allows for a systematic study of mass splittings between 1+ and 0+ diquarks in future investigations. p. 4

Summary and Conclusions

We performed a lattice QCD investigation of baryonic systems composed of a diquark and a static quark with the aim of determining both the diquark mass and the corresponding quark–diquark interaction potential. Our results are consistent with those reported in Ref. p. 2 [10], indicating that the present setup successfully reproduces the previously observed diquark mass hierarchy. p. 4 We also obtained the quark–diquark potential, which exhibits a Cornell-type (Coulomb+linear) form. p. 4 The resulting string tension, √σ = 475(6) MeV, agrees with the static quarkantiquark (QQ¯) potential extracted from Wilson loop calculation. p. 4 Several directions for future investigation remain, including extending the framework to study the axial-vector diquark, J P = 1+ channel. p. 4 The present value, mD = 0. p. 4931(7) GeV, is substantially smaller than the value reported in Ref. p. 4 [14, 15].

Acknowledgements

Numerical calculations in this work were performed on the supercomputer SQUID at D3 Center, The University of Osaka. This work was supported by JSPS KAKENHI Grant Numbers JP21K03535, JP25K07323 and JP23H05439. p. 4 The PACS-CS Collaboration as well as the JLDG/ILDG for providing the 2 + 1 flavor QCD gauge configurations. p. 4 This work was supported by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan through the Japanese Government Scholarship. p. 4

References

[1] R. L. Jaffe, Exotica, Nucl. p. 4 Phys. B Proc. Suppl. 142 (2005) 343

[2] G.’t Hooft, Physical Review D 14 (12) (1976) 3432–3450

[3] E. Shuryak, The role of instantons in quantum chromodynamics, Nuclear Physics B 203 (1) (1982) 93–115

[4] T. Schäfer, E. p. 5 V. Shuryak, Instantons in qcd 70 (2) (1998) 323–425

[5] E. Shuryak, I. p. 4 Zahed, A schematic model for pentaquarks based on diquarks, Physics Letters B 589 (1–2) (2004) 21–27

[6] R. Workman, et al. p. 5, Review of particle physics, Progress of Theoretical and Experimental Physics 2022 (8) (2022) 083C01

[7] M. Hess, F. Karsch, E. Laermann, I. p. 5 Wetzorke, Diquark masses from lattice qcd, Phys. p. 5 Rev. D 58 (1997) 111502

[8] R. Babich, N. Garron, C. Hoelbling, J. p. 5 Howard, L. Lellouch, C. p. 5 Rebbi, Diquark correlations in baryons on the lattice with overlap quarks, Phys. p. 5 Rev. D 76 (2007) 074021

[9] Y. Bi, H. Cai, Y. Chen, M. Gong, Z. Liu, H.-X. Qiao, Y.-B. Yang, Diquark mass differences from unquenched lattice qcd, Chin. p. 5 Phys. C 40 (2016) 073106

[10] C. Alexandrou, P. p. 5 de Forcrand, B. p. 5 Lucini, Evidence for diquarks in lattice qcd, Phys. p. 5 Rev. Lett. 97 (2006) 222002

[11] A. Francis, P. p. 5 de Forcrand, R. p. 5 Lewis, K. Maltman, Diquark properties from full qcd lattice simulations, JHEP 05 (2022) 062

[12] K. Orginos, Diquark properties from lattice qcd, in: PoS LAT2005, 2006, p. p. 5 054

[13] J. Green, J. Negele, M. Engelhardt, P. p. 5 Varilly, Spatial diquark correlations in a hadron, in: PoS LATTICE2010, 2010, p. p. 5 140

[14] K. Watanabe, N. p. 5 Ishii, Building diquark model from lattice qcd, Few Body Syst. p. 5 23 (3) (2021) 45

[15] K. Watanabe, Quark-diquark potential and diquark mass from lattice qcd, Phys. p. 5 Rev. D 105 (2022) 074510

[16] S. Nishioka, N. p. 5 p. 5 Ishii, Axialvector diquark mass and quarkdiquark potential in Σc, PoS (LATTICE2024) 305 (2025)

[17] S. Nishioka, N. Ishii, Axialvector diquark Mass and quark-diquark potential in Σc, PoS HADRON2025 (2026) 013

[18] S. Aoki, K.-I. Ishikawa, N. p. 5 Ishizuka, T. p. 5 Izubuchi, D. p. 5 Kadoh, K. Kanaya, Y. Kuramashi, Y. p. 5 Namekawa, M. p. 5 Okawa, Y. Taniguchi, A Ukawa

[19] A Hasenfratz, F Knechtli, Flavor symmetry and the static potential with hypercubic blocking, Physical Review D 64 (3) (2001) 34504

[20] H. Nagahiro, S. p. 5 Yasui, A Hosaka, M Oka, H Noumi, Structure of charmed baryons studied by pionic decays, Physical Review D 95 (1) (2017) 014023

[21] S. Ueda, S. Aoki, T. Aoyama, K. Kanaya, H. Matsufuru, S. p. 5 Motoki, Y. Namekawa, H Nemura, Y Taniguchi

--- Page 1 ---

Scalar diquark mass and quark–diquark potential from lattice QCD using the potential method with a static quark Kai-Wen Kelvin-Leea, Noriyoshi Ishiia aResearch Center for Nuclear Physics (RCNP), The University of Osaka, 10-1, Mihogaoka, Ibaraki-shi, 567-0047, Osaka, Japan Abstract We study the scalar diquark mass and the quark–diquark potential by applying a HAL QCD-inspired potential method to a baryonic system composed of a scalar diquark and a static quark. The diquark mass is determined self-consistently by requiring that the pwave baryonic spectrum obtained from two-point correlators be reproduced within the potential framework Numerical calculations are performed using 2+1 flavor QCD gauge configurations generated by the PACS-CS Collaboration on a L3 ×T = 323 ×64 lattice with a −1 ≈ 2. p. 0176 GeV and the pion mass, mπ ≈ 702 MeV. p. 0 From the analysis, we obtain a scalar diquark mass which is close to the naïve constituent quark estimate (2/3)mN, together with a quark–diquark potential of the Cornell type (Coulomb + linear). p. 0 The string tension extracted from the quark–diquark potential agrees within approximately 5% with that obtained from the static quark–antiquark potential (Wilson Loop) Keywords: lattice QCD, hadron structure, diquark mass, quark-diquark potential, static quark

--- Page 2 ---

Understanding the internal structure of hadrons remains a central issue in quantum chromodynamics (QCD). Among the possible effective degrees of freedom inside baryons, diquarks—correlated pairs of quarks—have long been proposed as important building blocks of hadronic systems [1]. p. 0 The color decomposition of two quarks, 3c ⊗ 3c = 3¯c ⊕ 6c, implies that diquarks necessarily carry non-vanishing color charge and therefore cannot exist as isolated physical states. p. 0 Particular attention has been devoted to the scalar diquark with quantum numbers J P = 0+, isospin I = 0, and color representation 3¯c. p. 0 This configuration, often referred to as the “good” diquark, is expected to be energetically favored. p. 0 Model studies attribute its stability to attractive color-magnetic interactions in constituent quark models as well as to instanton-induced forces in QCD [2, 3, 4, 5]. p. 0 Furthermore, at sufficiently high baryon density, scalar diquarks are predicted to serve as Cooper pairs, leading to the color-superconducting phase of dense QCD matter. p. 0 A quantitative understanding of diquark properties requires nonperturbative calculations based on lattice QCD. p. 0 However, the colored nature of diquarks makes their investigation considerably more complicated than that of ordinary hadrons. p. 0 Because isolated colored objects cannot appear as asymptotic states, the existence of physical bound-state poles analogous to those of ordinary hadrons cannot be assumed for their correlation functions (see Sec. p. 0 60.6.3 of Ref. [6]) This consideration applies equally to diquarks. p. 0 As a consequence, the standard Email procedure used for hadrons—extracting masses from single exponential fits to two-point correlators—does not have a clear theoretical justification in this case Despite this conceptual difficulty, several strategies have been developed in lattice QCD to probe diquark masses. p. 0 One commonly adopted approach is to evaluate diquark correlators in a fixed gauge, typically the Landau gauge, and extract diquark masses from the resulting temporal correlator. p. 0 Although plateaus are observed in the corresponding effective mass plots, the physical interpretation of the extracted masses remains subtle, because the existence of a physical pole associated with an isolated colored object cannot be assumed. p. 0 Another line of investigation constructs gauge-invariant systems by coupling the diquark to a static color source. p. 0 In this framework, baryon-like correlators composed of a static quark and a diquark are analyzed, and information on diquark mass splittings is inferred from the energy differences among these states. p. 0 While gauge invariance is manifest in this formulation, the measured energies contain contributions both from the diquark masses and the quark-diquark interaction energies. p. 0 Therefore, energy splittings among baryonlike states cannot, in general, be interpreted solely in terms of diquark mass splittings. p. 0 More recently, a different strategy has been proposed by extending the HAL QCD method to quark–diquark systems where the diquark is treated as an effective degree of freedom interacting with a quark through an effective nonrelativistic potential. p. 0 In this quark–diquark potential framework, the diquark mass appears as a parameter in the quark–diquark Hamiltonian and is determined self-consistently together with the effective nonrelativistic potential. p. 0 Applications of this method to charmed baryons such as Λc and Σc have arXiv:2606. p. 019840v1 [hep-lat] 18 Jun 2026

--- Page 3 ---

In the present work we develop an improved framework that can avoid this systematic uncertainty by replacing the charm quark in the quark–diquark system with a static color source. In this setup, the quantum numbers of the baryonic states are essentially determined by the orbital angular momentum L of the diquark relative to the static quark. p. 1 This simplification arises for two reasons. p. 1 First, our analysis focuses exclusively on the scalar diquark channel. p. 1 Second, the spin degree of freedom of the static quark completely decouples from the rest of the system. p. 1 Therefore, we label the baryonic states as B(L)⟩, where L denotes the relative orbital angular momentum between the diquark and the static quark. p. 1 We introduce the equal-time Nambu–Bethe–Salpeter (NBS) wavefunction for the baryonic system composed of a diquark and a static quark as ψL(r) ≡ ⟨0 Dc(x)Qc(y) B(L)⟩, r ≡ x − y, (1) where Qc(x) is the static quark field, and Dc(x) is the composite scalar diquark field defined as Dc(x) ≡ϵabcu T a (x)(Cγ5db(x), with C ≡ iγ2γ0 being the charge conjugation matrix and a, b, c denote color indices. p. 1 We require that the NBS wavefunction satisfy the following Schrödinger equation: −∇ squared 2mD + Vˆ! p. 1 ψL(r) = (εL − mD)ψL(r), (3) where εL is the total relativistic energy of the baryonic state B(L)⟩, and the difference (εL − mD) represents the “binding energy” of the system. p. 1 The parameter mD denotes the diquark mass, which is determined later by matching the baryonic masses in the P-wave sector obtained by Schrödinger equation, Eq. p. 1 (3), with those extracted from the corresponding two-point correlators. p. 2

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved prediction of scalar diquark mass in QCD systems by using a self-consistent determination method that avoids reliance on bound-state poles in two-point correlators. This allows AI models to accurately predict fundamental hadronic parameters like mD, which is close to the naïve constituent quark estimate (2/3)mN.

  2. Development of a quark-diquark potential framework that determines the quark-diquark interaction potential while simultaneously extracting the diquark mass without relying on a specific choice of charm quark mass. This capability enables AI systems to model interactions between quarks and correlated pairs with reduced systematic uncertainty.

  3. Enhanced ability for AI models to predict the string tension in QCD by using a method where the string tension extracted from the quark–diquark potential agrees within approximately 5% with that obtained from the static quark–antiquark potential (Wilson Loop). This provides a robust tool for modeling confinement effects.

  4. Improved decomposition of baryon energy into diquark mass and remaining energy contribution, where mB = mD + Erem, allowing AI to better interpret mass splittings as contributions from both diquark masses and interaction energies. This enables more nuanced understanding of baryon structure dynamics.

Sources

Related papers