Receiver-Aware Analysis and Verification of the Spectral Separation Coefficient Under Interference-Induced Degradation

arXiv:2606.18196 · eess.SP · Submitted 2026-06-16 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Electrical Engineering. The day in electrical engineering: signals, systems and the hardware that carries them.

Rosa: We're looking at the paper: "Receiver-Aware Analysis and Verification of the Spectral Separation Coefficient Under Interference-Induced Degradation".

Dev: Here's the gist of the paper. Interference poses a significant challenge to satellitebased positioning systems, making it essential to accurately quantify the effects of specific interference types on receiver performance and the resulting reliability of position computation.

Rosa: The primary objective of this work is to compute the SSC as a function of receiver front-end parameters and to analyze and validate this computation using both real-world measurements and simulated data.

Dev: Theoretical Foundations of Spectral Separation Coefficient The SSC constitutes a compact and physically motivated metric for quantifying interference impact, as it explicitly captures the effective spectral overlap between interference and the desired signal at the receiver correlator.

Rosa: Existing formulations predominantly employ receiverindependent or idealized receiver models, in which frontend filtering, bandwidth limitations, and implementationspecific processing effects are either abstracted or implicitly assumed.

Title and authors: Rosa: So we're looking at this paper today called "Receiver-Aware Analysis and Verification of the Spectral Separation Coefficient Under Interference-Induced Degradation." It sounds a bit technical, but what it really wants to do is fix a problem where we usually just use these idealized metrics for interference effects.

Dev: Yeah, exactly. The authors are tackling this issue because in current practice, we often use receiver-independent metrics when quantifying how interference messes with the satellite positioning system's performance and reliability. They argue that this ignores the specific characteristics of the receiver front end entirely.

Taro: So instead of just saying "this interference is bad," they want to quantify *how* it's bad based on what kind of hardware you have, like the filtering or the bandwidth limits you're using.

Rosa: Right. They are explicitly incorporating those receiver-specific front end characteristics into how they compute this spectral separation coefficient, or SSC, and then they validate this whole process using real-world measurements from two hundred ten different interference scenarios <ref:2606.18196#pg1,receiver-specific front end characteristics into>.

Dev: So the main implication here is moving away from those idealized models that ignore the hardware details and getting a metric that actually tells you how much performance degrades for a specific setup.

The paper's summary: Rosa: Let me summarize what they are saying about this paper. They focus on how the SSC, which is this metric for quantifying interference impact, needs to be receiver-aware because it captures the effective spectral overlap between the interference and your desired signal at the receiver correlator.

Dev: It's not just a simple power ratio; it explicitly takes into account things like how much filtering you have or what bandwidth you are using. The paper shows that this makes the metric physically meaningful over the specific frequency region your receiver actually passes.

Taro: So, they say if you use a different receiver architecture, even with the same pair of signals, you'll get a different SSC value because of how it handles things internally. That means the degradation to your carrier-to-noise density ratio is directly tied to that hardware choice.

Rosa: Exactly. They derive some other metrics too, like this jamming resistance quality factor Q, which they find is really useful because it shows that the degradation isn't just about how powerful the interference signal is, but more about its spectral alignment with your desired signal.

Dev: So when you look at their results from the real-world dataset, they show that interference signals that are spectrally aligned better with the desired signal actually cause lower performance loss compared to others, even if they have comparable power levels.

The paper's improvements: Taro: What’s interesting about what they propose is how the jamming resistance quality factor Q relates to the interference power Ci and the resulting degradation Delta across all these scenarios. They find a clear relationship there, which is pretty useful for predicting performance.

Rosa: They show that increasing Q up to ten substantially reduces this loss, and it actually shifts that curve in a way that makes it less sensitive to the absolute power of the interference signal. That's because signals with wider bandwidth or frequency offsets tend to have higher Q values, which helps mitigate the degradation even when they are powerful.

Dev: The authors use this receiver-aware SSC formulation to show that you can map it directly to an equivalent degradation in carrier-to-noise density ratio for a fixed receiver architecture. This means the AI system can take those measured spectral interference characteristics and predict how much your actual C/N0 will drop for that specific hardware setup.

Taro: That mapping capability is what I care about. Being able to translate a spectral measurement into an observable performance metric like real and computed C/N0 with high fidelity is important for testing resilience in the field.

Conclusion: Rosa: So, wrapping up on this paper, they confirm that the jamming resistance quality factor Q reliably predicts the effective carrier-to-noise density ratio degradation across all interference types they tested. They conclude that this Q value is a compact and robust way to predict performance loss based on the spectral overlap.

Dev: It’s a receiver-aware metric, meaning it accounts for how your front end actually processes the signal, which is something we’ve been missing in previous work where things were more idealized. They validated this using both real-world open-field data and controlled simulations from an RFCS to show it holds up across different environments.

Taro: I just want to add that the authors noted a limitation, and it’s important to hear that they did acknowledge—they say the method is specific to their analysis, so you can't just plug in any arbitrary receiver model without understanding how those front end characteristics influence the result.

Rosa: Exactly. So, if you're trying to use this for something new, you need to understand how those specific receiver parameters feed into that SSC calculation before you rely on it completely.

Dev: Anyway, the paper "Receiver-Aware Analysis and Verification of the Spectral Separation Coefficient Under Interference-Induced Degradation" gives us a better tool for understanding interference impact by making sure we account for the actual hardware involved, moving us closer to more accurate performance prediction in real systems.

Fraunhofer Institute for Integrated Circuits IIS

eess.SP

Submitted: 2026-06-16

Updated: 2026-06-18

Comments: 7 pages, 4 figures

Journal ref: IEEE Intl. Conf. on Localization and GNSS (ICL-GNSS), Rome, Italy, October 2026

DOI: 10.1109/ICL-GNSS70771.2026.11767889

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 79/100

The gist: Interference poses a significant challenge to satellitebased positioning systems, making it essential to accurately quantify the effects of specific interference types on receiver performance and the…

Key concepts

Spectral Separation Coefficient (SSC)
A metric that measures the effective spectral overlap between an interference signal and the desired satellite signal at the receiver. Unlike simpler metrics, this SSC explicitly accounts for how a specific receiver's filtering and bandwidth limitations affect how much of the interference actually impacts the desired signal.
Jamming Resistance Quality Factor (Q)
A key metric derived from the SSC that quantifies interference impact. This factor shows that performance degradation is primarily driven by the spectral characteristics of the interference—like its bandwidth or frequency offset—rather than just how strong its total power is.
Effective Carrier-to-Noise Density Ratio (C/N0) Degradation
The measure of how much the desired signal quality drops when interference is present. The paper uses this to define performance based on the correlator output, showing that the SSC and Q reliably predict this degradation across various interference types in both real and simulated scenarios.

Terminology

Summary

Interference poses a significant challenge to satellitebased positioning systems, making it essential to accurately quantify the effects of specific interference types on receiver performance and the resulting reliability of position computation. p. 0 The primary objective of this work is to compute the SSC as a function of receiver front-end parameters and to analyze and validate this computation using both real-world measurements and simulated data. p. 0

Theoretical Foundations of Spectral Separation Coefficient

The SSC constitutes a compact and physically motivated metric for quantifying interference impact, as it explicitly captures the effective spectral overlap between interference and the desired signal at the receiver correlator. Existing formulations predominantly employ receiverindependent or idealized receiver models, in which frontend filtering, bandwidth limitations, and implementationspecific processing effects are either abstracted or implicitly assumed. p. 0 The SSC is physically meaningful only over the frequency region passed by the receiver filter and may therefore be expressed by explicitly incorporating the receiver transfer function into the overlap integral as. p. 2 Different receiver architectures or intermediate-frequency placements may yield different SSC values for the same pair of signals, reinforcing the role of the SSC as a receiver-dependent measure that directly governs interference-induced degradation of the effective carrier-to-noise density ratio. p. 2

Derivation of Receiver-Dependent Metrics

The performance of signal acquisition, carrier tracking, and data demodulation depends critically on the SNIR at the output of the receiver correlator. The effective carrier-to-noise density ratio is defined analogously using the correlator output SNIR given by Eq. p. 2 1. When both thermal noise and interference are present, the effective carrier-to-noise density ratio is defined analogously, but using the correlator output SNIR given by Eq. p. 2 1. The jamming resistance quality factor is identified as Q = Z Br/2 - Br/2 Ss(f) df / (Z Br/2 - Br/2 Si(f) Ss(f) df). p. 2

Experimental Validation and Findings

The paper validates the computation through both real-world measurements and controlled simulations using a representative receiver module. The results demonstrate that interferenceinduced degradation is governed not solely by interference power Ci, but predominantly by spectral overlap as quantified by the jamming resistance quality factor Q. p. 4 Interference signals with stronger spectral alignment to the desired signal yield lower. p. 4

Impact of Jamming Resistance Quality Factor

The jamming resistance quality factor Q exhibits a clear relationship with both the interference power Ci and the observed degradation ∆ across all considered scenarios. Increasing Q to 10 substantially mitigates this loss, shifting the curve and reducing the sensitivity to Ci. p. 4 Interference signals with increased BW or frequency offsets yield higher Q values and a corresponding reduction in degradation even at comparable power levels. p. 5

Conclusion

We used a receiver-aware SSC formulation to assess interference-induced performance degradation. Real-world and simulated results show that the jamming resistance Q reliably predicts effective C/N0 degradation across interference types. p. 5 The paper confirms that Q constitutes a compact, robust, and receiveraware metric for predicting interference-induced performance degradation. p. 5

TABLE I: Overview of notations used in the SSC analysis. p. 1

Notation Description

ρc Signal-to-noise-plus-interference ratio (SNIR)

T Coherent integration time of the correlator [s]

f Frequency variable [Hz]

Br Effective receiver bandwidth [Hz]

HR(f) Receiver transfer function (dimensionless)

Cs Received power of the signal over bandwidth [W]

Ci Received power of the interference signal over BW [W]

N0 One-sided PSD of additive white Gaussian noise [W/Hz]

Ss(f) PSD of the desired signal [1/Hz]

Si(f) PSD of the interference signal [1/Hz]

τ Code delay between local replica and received signal [s]

Cs/N0 Carrier-to-noise density ratio of the desired signal [Hz]

(Cs/N0)eff Effective C/N0 density ratio during interference [Hz]

Rc Spreading code rate [chips/s]

Q Jamming resistance quality factor (dimensionless)

TABLE II: Overview of interference recordings with Spirent (left part) and the corresponding jamming resistance Q, interference power (either computed, Ci, or with reference from Spirent, Ci,ref), and degradation ∆ dependent on Ci (right part) of the simulated dataset. p. 5 p. 5 p. 5 p. 5 Results are averaged over 10 IQ samples and we present standard deviation (±). p. 5 p. 5 p. 5 p. 5 p. 5

BPSK 57 dB ≈ 10 MHz 0 MHz 10. p. 492 ± 0.08 −84.50 ± 0.01 −84.0 4.14 ± 0.02 37

BPSK 57 dB ≈ 10 MHz 9.7 -91.83 ± 0.2-94.0 1,24 ± 0.

Fig. 3: Overview of jamming resistance Q, interference power Ci, and degradation ∆ for the real-world dataset, averaged over ≈ 1,600 IQ interference samples with standard deviation. p. 4

Chirp (2 → 60MHz)

FreqHopper (0.1 → 50MHz)

Mod.Multi. Noise (0.1 → 50MHz)

Pulsed

Fig. 4: Plot of C/N0 loss for each visible satellite for four different interferences (first period shows no interference). p. 5

TABLE II: Overview of interference recordings with Spirent (left part) and the corresponding jamming resistance Q, interference power (either computed, Ci, or with reference from Spirent, Ci,ref), and degradation ∆ dependent on Ci (right part) of the simulated dataset. Results are averaged over 10 IQ samples and we present standard deviation (±).

BPSK 57 dB ≈ 10 MHz 0 MHz 9. p. 470 ± 0.15 −91.83 ± 0.2-94.0 1,24 ± 0".

Fig. 4: shows the evolution of the C/N0 ratio for all visible satellites under four representative interference scenarios. p. 5

TABLE II: Overview of interference recordings with Spirent (left part) and the corresponding jamming resistance Q, interference power (either computed, Ci, or with reference from Spirent, Ci,ref), and degradation ∆ dependent on Ci (right part) of the simulated dataset. Results are averaged over 10 IQ samples and we present standard deviation (±).

Chirp 5 kHz 57 dB 4 MHz 0 MHz 5. p. 510 ± 0.17 −84.48 ± 0.03 −84.0 6,46 ± 0".

Fig. 2d to 2f evaluates simulated interference scenarios and the sensitivity of the jamming resistance quality factor Q to BW and frequency shift. p. 5 p. 5 p. 5 p. 5

TABLE II: Overview of interference recordings with Spirent (left part) and the corresponding jamming resistance Q, interference power (either computed, Ci, or with reference from Spirent, Ci,ref), and degradation ∆ dependent on Ci (right part) of the simulated dataset. Results are averaged over 10 IQ samples and we present standard deviation (±).

Chirp 5 kHz 57 dB 4 MHz 4 MHz 42. p. 5 p. 542 ± 0.66 −83.56 ± 0.01 −84.0 1,79 ± 0".

Fig. 2d to 2f evaluates simulated interference scenarios and the sensitivity of the jamming resistance quality factor Q to BW and frequency shift.

TABLE II: Overview of interference recordings with Spirent (left part) and the corresponding jamming resistance Q, interference power (either computed, Ci, or with reference from Spirent, Ci,ref), and degradation ∆ dependent on Ci (right part) of the simulated dataset. Results are averaged over 10 IQ samples and we present standard deviation (±).

Chirp 5 kHz 57 dB 20 MHz 0 MHz 18. p. 517 ± 0.53 −83.81 ± 0.02 −84.0 3,27 ± 0".

Fig. 2d to 2f evaluates simulated interference scenarios and the sensitivity of the jamming resistance quality factor Q to BW and frequency shift.

Chirp 5 kHz 57 dB 20 MHz 0 MHz 11. p. 506 ± 0.12 −91.62 ± 0.03 −94.0 1,16 ± 0".

Fig. 2d to 2f evaluates simulated interference scenarios and the sensitivity of the jamming resistance quality factor Q to BW and frequency shift.

Chirp 5 kHz 57 dB 4 MHz 4 MHz 42.37 ± 0.66 −83.56 ± 0.01 −84.0 1,79 ± 0".

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Receiver-aware spectral separation coefficient computation can be implemented to explicitly incorporate receiver front-end characteristics into interference impact quantification. This allows AI systems to compute a receiver-dependent spectral separation coefficient (SSC) that goes beyond idealized or receiver-independent metrics, providing a more accurate assessment of interference effects for specific hardware.

  2. Interference impact analysis can be enhanced by using the jamming resistance quality factor Q as an explicit metric instead of relying solely on generalized SSC formulations. This Q value is shown to be predominantly determined by the spectral characteristics of the interference rather than by its absolute power, enabling AI systems to predict performance degradation based on signal shape and bandwidth rather than just interference intensity.

  3. The improved system can perform real-time performance mapping by using Eq 10, which relates the SSC directly to an equivalent degradation in carrier-to-noise density ratio for a fixed receiver architecture. This enables the AI to map measured spectral interference characteristics to observable performance metrics like real and computed C/N0 with high fidelity.

  4. The system can be trained on both real-world open-field datasets and controlled simulated data from an RFCS to ensure robustness across different environments. This dual validation process ensures that the computed interference impact remains reliable when transitioning from empirical measurements to controlled simulations, as demonstrated by comparing results obtained in both environments.

Related papers