Quantum mechanics in configuration space in context
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Quantum Radio. Generated commentary on the latest quantum physics and condensed matter papers.
Kai: We're looking at the paper: "Quantum mechanics in configuration space in context".
Mira: Here's the gist of the paper. Quantum mechanics in configuration space in context enhances the way in which wave-particle duality is implemented in the modelling of quantum mechanical systems This formalism increases the continuity between QM and CM by avoiding a conceptual inconsistency associated with the definition of momentum in canonical quantisation The paper reviews Quantum Mechanics in Configuration Space (QMCS) to show it enhances conceptual continuity and empirical consistency between quantum and classical mechanics Contextual Problem Physics often offers many different descriptions of the same phenomenon, raising questions about how models belonging to different theories are related Classical mechanics (CM) and quantum mechanics (QM) are two different frameworks that complement each other rather than clash, and they can be ordered by ontological fundamentality The standard formulation of QM was built upon Hamiltonian mechanics, inheriting some of its limitations Limitations of Standard Quantum Mechanics The canonical quantisation procedure in standard quantum mechanics (SQM) identifies the momentum operator as the generator for spatial translations, meaning it no longer represents the velocity of quantum mechanical particles Ehrenfest’s theorem, which requires expectation values to evolve as in CM, is only guaranteed in limited cases and cannot always bridge the conceptual gap between quantum and classical mechanics Furthermore, SQM does not describe photons and quantum mechanical particles in the same way because massive particle velocities are fully determined by their wave function's spatial distribution The QMCS Formalism QMCS promotes the classically distinguishable (x, v) states to quantum states x, v⟩ which form an orthonormal basis in the Hilbert space H The time derivative of these superposition states is given by a Schrödinger equation which defines a dynamical Hamiltonian Hˆdyn, demanding that the x, v⟩ states evolve according to Newton’s equations of motion along their classical trajectories Comparison with Standard Quantum Mechanics A key difference between SQM and QMCS is that the former is based on Hamiltonian mechanics, while the latter builds on Newtonian mechanics QMCS replaces canonical quantisation with a physically motivated quantisation approach where momentum coincides with the generator for spatial translation and no longer represents velocity In QMCS, one obtains an additional canonical commutator relation between the velocity ˆv and the acceleratum ˆa), i.e.,
ˆv, aˆ: = iħ The paper advocates for a "physically motivated quantisation" approach where the choice of quantum theory is heuristically driven by the preferred less-ontologically-fundamental classical theory, which increases conceptual continuity Starting from Newtonian mechanics results in QMCS, which has a strong conceptual continuity with Newtonian mechanics The formulation of SQM is derived from the less perspicuous Hamiltonian mechanics via canonical quantisation, limiting the conceptual continuity between SQM and Hamiltonian CM This approach suggests starting from a more physically perspicuous formulation of CM will result in a more perspicuous quantum theory Where the gains come from The QMCS dynamics in free space show that position and velocity expectation values evolve as predicted in CM, consistent with Newton’s equation of motion Localised wave packets remain localised at all times in QMCS, avoiding the infinitely fast spreading described in SQM The dynamical Hamiltonian Hˆdyn is Hermitian and conserves normalization, reflecting time reversal symmetry for a free particle Relation to Classical Mechanics The paper reviews Newtonian mechanics, Lagrangian mechanics, and Hamiltonian mechanics as distinct formulations of CM that yield different results when quantised Newtonian mechanics is considered the most suitable starting point for the physically motivated quantisation procedure due to its ontological and dynamical clarity Lagrangian mechanics replaces particles with possible paths and is considered less suitable for this procedure because it introduces an abstract notion of a scalar function rather than precise position and velocity at any given time Hamiltonian mechanics is mathematically elegant but less perspicuous than Newtonian mechanics because the conjugate momentum p is not generally the kinematic momentum mx˙ The QMCS formalism allows for simultaneous measurements of position and velocity with arbitrarily high precision, leading to a new uncertainty relation ∆v · ∆a ≥ ħ/2 Relation to Standard Quantum Mechanics Table I illustrates key differences between SQM and QMCS, showing that QMCS supports an additional observable and generator, namely the velocity observable ˆv and the acceleratum ˆa), which SQM lacks The free space Hamiltonian HˆSQM is assumed to equal HˆSQM = ˆp 2/2m since it evolves position and momentum expectation values in agreement with Hamiltonian mechanics In the presence of potentials V(x) ≠ 0, consistency between SQM and Hamiltonian mechanics is not always guaranteed QMCS delivers a position and a velocity observable, ˆx and ˆv), as well as corresponding generators, ˆp and ˆa), which are not present in SQM The momentum operator in QMCS is analogous to the momentum operator of light in quantum electrodynamics Final Synthesis The coexistence of multiple theoretical formulations enhances understanding because each offers additional mathematical structure and complementary insight The physically motivated quantisation approach, when applied to Newtonian mechanics, leads directly to QMCS The free evolution in QMCS reveals a richer structure than that of SQM which might open the path to exploring quantum relativity and quantum gravity in a more direct way This paper demonstrates that starting from two distinct formulations of CM can generate distinct quantum theories, and prioritizing the most perspicuous formulation leads to a more perspicuous quantum theory The approach counts continuity with prior physical concepts as an essential part of justifying a proposed more fundamental framework Acknowledgement AB thanks the Saudi government ministry of education represented by the Saudi Arabian Cultural Bureau in London (SACB) for their financial support MJD thanks Jonny Downes for helpful discussions
Paper summary: Kai: So, we’re looking at this paper, "Quantum mechanics in configuration space in context." The core idea here is using a physically motivated quantization of Newtonian mechanics to replace the standard way we quantize.
Mira: They’re taking the classical position and velocity states, which they call x and v states, and promoting them into quantum states that are distinguishable. These new basis states then evolve according to a Schrödinger equation that demands they follow Newton's equations of motion along those classical paths >
Kai: The paper argues this approach makes the continuity between quantum mechanics and classical mechanics much stronger by avoiding some conceptual issues with how we define momentum in canonical quantization >
Mira: They claim this formalism enhances conceptual continuity and empirical consistency between quantum and classical mechanics, especially when looking at models of a mechanical particle in free space >
Lev: From an error correction standpoint, the paper suggests that starting from Newtonian mechanics gives you a more physically intuitive quantum theory rather than starting from Hamiltonian mechanics which they say is less perspicuous for this purpose >
Kai: Right, so instead of relying on canonical quantisation where momentum is the generator for spatial translations, they are making momentum represent something else entirely in their configuration space setup >
Mira: And they get an extra relation between the velocity operator and the acceleration operator, which is that commutator relation between v and a equals i over h bar >
Lev: That extra relation means we're looking at a system with two generators, position and velocity, along with their corresponding operators for acceleration >
Kai: It’s interesting because they show that the dynamics in free space have position and velocity expectation values evolving exactly as predicted by Newton’s equations of motion >
Mira: They also address how localized wave packets behave; they find that they stay localized at all times in this configuration space setup, which avoids the infinitely fast spreading seen in standard quantum mechanics >
Lev: That localization result is important for real hardware because it implies a certain stability for the states you'd actually be trying to simulate or measure >
Conclusion: Kai: So, wrapping up this look at "Quantum mechanics in configuration space in context," the authors are really pushing for a quantization approach that is driven by which classical theory you prefer first >
Mira: They argue that starting from Newtonian mechanics leads directly to this configuration space quantum mechanics, which they say has a strong conceptual link with Newtonian mechanics itself >
Kai: It’s about moving away from the standard Hamiltonian approach, which they feel is less clear when trying to bridge the gap between quantum and classical physics >
Mira: The implication is that by prioritizing a more physically intuitive classical starting point, like Newtonian mechanics, you get a quantum theory that feels more intuitively connected to those physical concepts >
Lev: For practical purposes on hardware, this suggests that if we can build something based on these configuration space ideas, it should offer a clearer path to defining the dynamics of the system without having to wrestle with the canonical momentum definition issues >
Kai: It’s about finding a formulation where you can measure position and velocity simultaneously with high precision because they are treated as two distinct observables in this framework >
Mira: The paper shows that this different way of framing things gives us more mathematical structure, which opens up new avenues for thinking about quantum relativity or gravity if we keep pushing the formalism >
Arwa Bukhari, Margherita Moro, Max Davies, Alastair Wilson, Almut Beige
School of Physics and Astronomy, University of Leeds · School of Physics, Umm Al-Qura University, Makkah, Saudi Arabia
quant-ph
Submitted: 2026-06-16
Updated: 2026-11-14
Comments: 12 pages, 3 figures, 1 table, revised version
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 60/100
The gist: Quantum mechanics in configuration space in context enhances the way in which wave-particle duality is implemented in the modelling of quantum mechanical systems This formalism increases the…
Key concepts
- Configuration Space
- This is the space where a particle exists based on its position and velocity (x, v). QMCS treats these pairs as fundamental quantum states. This contrasts with standard QM where momentum is defined differently, making the description more directly related to classical motion.
- Physically Motivated Quantisation
- This approach suggests choosing a quantum theory based on which classical theory is more intuitive or 'perspicuous.' By starting from Newtonian mechanics, QMCS emerges as a natural choice. This prioritizes conceptual continuity with the preferred classical framework over mathematical elegance alone.
- Canonical Quantisation vs. Physically Motivated Quantisation
- Standard QM uses canonical quantisation, where momentum is treated as a generator for spatial translations and not velocity. QMCS replaces this with a physically motivated method where momentum aligns with the generator of spatial translation, avoiding conceptual gaps between quantum and classical descriptions.
- Velocity Observable ($Ψv$)
- QMCS introduces an observable for velocity ($Ψv$) alongside position. This allows for simultaneous, high-precision measurements of both position and velocity. This is a key feature that standard quantum mechanics lacks, providing richer dynamical information.
Terminology
Summary
Quantum mechanics in configuration space in context enhances the way in which wave-particle duality is implemented in the modelling of quantum mechanical systems This formalism increases the continuity between QM and CM by avoiding a conceptual inconsistency associated with the definition of momentum in canonical quantisation The paper reviews Quantum Mechanics in Configuration Space (QMCS) to show it enhances conceptual continuity and empirical consistency between quantum and classical mechanics
Contextual Problem
Physics often offers many different descriptions of the same phenomenon, raising questions about how models belonging to different theories are related Classical mechanics (CM) and quantum mechanics (QM) are two different frameworks that complement each other rather than clash, and they can be ordered by ontological fundamentality The standard formulation of QM was built upon Hamiltonian mechanics, inheriting some of its limitations
Limitations of Standard Quantum Mechanics
The canonical quantisation procedure in standard quantum mechanics (SQM) identifies the momentum operator as the generator for spatial translations, meaning it no longer represents the velocity of quantum mechanical particles Ehrenfest’s theorem, which requires expectation values to evolve as in CM, is only guaranteed in limited cases and cannot always bridge the conceptual gap between quantum and classical mechanics Furthermore, SQM does not describe photons and quantum mechanical particles in the same way because massive particle velocities are fully determined by their wave function's spatial distribution
The QMCS Formalism
QMCS promotes the classically distinguishable (x, v) states to quantum states x, v⟩ which form an orthonormal basis in the Hilbert space H The time derivative of these superposition states is given by a Schrödinger equation which defines a dynamical Hamiltonian Hˆdyn, demanding that the x, v⟩ states evolve according to Newton’s equations of motion along their classical trajectories
Comparison with Standard Quantum Mechanics
A key difference between SQM and QMCS is that the former is based on Hamiltonian mechanics, while the latter builds on Newtonian mechanics QMCS replaces canonical quantisation with a physically motivated quantisation approach where momentum coincides with the generator for spatial translation and no longer represents velocity In QMCS, one obtains an additional canonical commutator relation between the velocity ˆv and the acceleratum ˆa), i.e., [ˆv, aˆ] = iħ
Conclusion on Methodology
The paper advocates for a physically motivated quantisation
approach where the choice of quantum theory is heuristically driven by the preferred less-ontologically-fundamental classical theory, which increases conceptual continuity Starting from Newtonian mechanics results in QMCS, which has a strong conceptual continuity with Newtonian mechanics The formulation of SQM is derived from the less perspicuous Hamiltonian mechanics via canonical quantisation, limiting the conceptual continuity between SQM and Hamiltonian CM This approach suggests starting from a more physically perspicuous formulation of CM will result in a more perspicuous quantum theory
Where the gains come from
The QMCS dynamics in free space show that position and velocity expectation values evolve as predicted in CM, consistent with Newton’s equation of motion Localised wave packets remain localised at all times in QMCS, avoiding the infinitely fast spreading described in SQM The dynamical Hamiltonian Hˆdyn is Hermitian and conserves normalization, reflecting time reversal symmetry for a free particle
Relation to Classical Mechanics
The paper reviews Newtonian mechanics, Lagrangian mechanics, and Hamiltonian mechanics as distinct formulations of CM that yield different results when quantised Newtonian mechanics is considered the most suitable starting point for the physically motivated quantisation procedure due to its ontological and dynamical clarity Lagrangian mechanics replaces particles with possible paths and is considered less suitable for this procedure because it introduces an abstract notion of a scalar function rather than precise position and velocity at any given time Hamiltonian mechanics is mathematically elegant but less perspicuous than Newtonian mechanics because the conjugate momentum p is not generally the kinematic momentum mx˙ The QMCS formalism allows for simultaneous measurements of position and velocity with arbitrarily high precision, leading to a new uncertainty relation ∆v · ∆a ≥ ħ/2
Relation to Standard Quantum Mechanics
Table I illustrates key differences between SQM and QMCS, showing that QMCS supports an additional observable and generator, namely the velocity observable ˆv and the acceleratum ˆa), which SQM lacks The free space Hamiltonian HˆSQM is assumed to equal HˆSQM = ˆp 2/2m since it evolves position and momentum expectation values in agreement with Hamiltonian mechanics In the presence of potentials V(x) ≠ 0, consistency between SQM and Hamiltonian mechanics is not always guaranteed QMCS delivers a position and a velocity observable, ˆx and ˆv), as well as corresponding generators, ˆp and ˆa), which are not present in SQM The momentum operator in QMCS is analogous to the momentum operator of light in quantum electrodynamics
Final Synthesis
The coexistence of multiple theoretical formulations enhances understanding because each offers additional mathematical structure and complementary insight The physically motivated quantisation approach, when applied to Newtonian mechanics, leads directly to QMCS The free evolution in QMCS reveals a richer structure than that of SQM which might open the path to exploring quantum relativity and quantum gravity in a more direct way This paper demonstrates that starting from two distinct formulations of CM can generate distinct quantum theories, and prioritizing the most perspicuous formulation leads to a more perspicuous quantum theory The approach counts continuity with prior physical concepts as an essential part of justifying a proposed more fundamental framework
Acknowledgement
AB thanks the Saudi government ministry of education represented by the Saudi Arabian Cultural Bureau in London (SACB) for their financial support MJD thanks Jonny Downes for helpful discussions
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Enhanced quantum-classical continuity in modeling mechanical systems by replacing canonical quantisation with a physically motivated quantisation approach, which promotes classical position-velocity states to pairwise distinguishable quantum states |x, v> states forming the basis of the Hilbert space H.
-
Ability to simulate particle dynamics in free space using a dynamical Hamiltonian H dyn defined by demanding that the x, v> states evolve according to Newton’s equations of motion along their classical trajectories, ensuring localised wave packets remain localised at all times.
-
Implementation of a new uncertainty relation for quantum mechanical particles, specifically a velocity-acceleratum uncertainty relation, i.e., Delta v times Delta a greater than or equal to 1 over sqrt(hbar), alongside the standard position-momentum uncertainty relation.
-
Capability to distinguish between Standard Quantum Mechanics (SQM) and Quantum Mechanics in Configuration Space (QMCS) by explicitly modeling observables such as the velocity operator v hat and the acceleratum operator a hat, which have no analogue in classical mechanical particles.
-
Integration of momentum and velocity into a single canonical structure where they are treated as independent variables, each carrying its own conjugate variable, precisely defined by two commutation relations in Eq. 26.
Abstract
The formalism of quantum mechanics in configuration space (QMCS) [Bukhari et al., New J. Phys. 27, 084501 (2025)] has been introduced to unify the modelling of photons and quantum mechanical particles. In this paper, we illustrate that QMCS also increases the continuity between quantum and classical mechanics, since it can be used to obtain both their predictions. Being based on a physically motivated quantisation of Newtonian mechanics, QMCS makes a clear distinction between the velocity observable v and the generator for spatial translations, i.e. the momentum operator p, of mechanical particles. In contrast, standard quantum mechanics, which is based on Hamiltonian mechanics, relates velocity directly to momentum rather than treating them as independent observables. Despite having many formal similarities with Hilbert space formulations of classical mechanics, QMCS is a quantum theory. To illustrate this and to further explore the relations between QMCS and alternative approaches, this paper studies quantum mechanical particles moving in free space as an example.
Sources
- The classical limit of quantum mechanics through coarse-grained measurements
- Between Laws and Models: Some Philosophical Morals of Lagrangian Mechanics
Related papers
- Computational regimes in matrix-product-state-based quantum trajectory simulations
- Toward chemically accurate quantum simulations on quantum hardware: A quantum-HPC hybrid approach
- Transversal surface-code game with reconfigurable qubits
- Fulqrum: a generalized framework for quantum subspace diagonalization
- Flux-Activated Resonant Control of a Bosonic Quantum Memory
- Machine learning the effects of many quantum measurements