Why dimensional analysis works: general classification of self-similarity based on scale-invariance

arXiv:2606.17179 · cond-mat.stat-mech · Submitted 2026-06-15 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Condensed Matter. The day in condensed matter: materials, phases and the measurements under them.

Kai: I'm Kai.

Mira: And I'm Mira, here with Lev.

Kai: We're looking at the paper: "Why dimensional analysis works".

Mira: Here's the gist of the paper. In this work, self-similarity is formulated from the perspective of scale invariance to provide a unified framework for understanding dimensional analysis and classifying self-similarity in physical problems The present work provides a unified framework for understanding dimensional analysis and a universal classification of self-similarity in physical problems Formulation of Self-Similarity Types The paper introduces three kinds of self-similar solutions based on the forms of the similarity parameters Case I.

Kai: Suppose that we have the following diffusion equation

49: with the boundary condition x ∈ (−∞, ∞) and the initial condition u (0, x) = Qδ (x).

Mira: Its solution can be expressed as u = f (t, x, D, Q) (2), and its self-similar form can be obtained by simply applying dimensional analysis This case is a self-similar solution of the first kind Case II.

Kai: Let us suppose the dynamical impact of a solid sphere onto a viscoelastic board

33: .

Paper summary: Kai: So, this paper, "Why dimensional analysis works: general classification of self-similarity based on scale-invariance," it basically takes self similarity and frames it around scale invariance. Mira That means they are looking at how a function transforms when you change the scale, and they connect that to physical parameters like units. Kai The main claim is that dimensional analysis works for physical problems because scale invariance is partially shared between the units themselves and the actual physical parameters of the problem >

Lev: So, if we're talking about what this paper does, it shows how self similarity appears as scale invariance in these systems >

Mira: They show that when you look at physical parameters—which are just numbers and their corresponding units—the way they scale is connected to the units themselves >

Kai: This leads them to split self similarity into two types based on whether the scaling functions induced by the units match those from the physical parameters or not >

Lev: That distinction is important because it separates how a problem behaves dimensionally from just how it looks mathematically, right? >

Mira: Exactly. And they use these kinds of similarity parameters to classify problems into three distinct types, which is what they call similarity of the first kind and the second kind >

Conclusion: Kai: Looking at this paper's main points about "Why dimensional analysis works: general classification of self-similarity based on scale-invariance," it really boils down to how we classify scaling laws in physics >

Mira: The authors are arguing that dimensional analysis isn't just a convenient shortcut; it’s because units and physical parameters share a fundamental scale invariance, which dictates whether you get similarity of the first kind or the second kind >

Kai: It suggests that understanding the structure of units alone gives you physical insight into scaling, which is counter-intuitive but they argue it's true when you look at how those physical parameters are structured >

Lev: For us on the ground, it means if we see a problem fitting one of these classifications, we can use dimensional analysis to find solutions without having to solve the full differential equation directly >

Mira: And the final point is that self similarity actually has three kinds based on whether those power exponents are functions of dimensionless numbers or not, which provides a universal way to categorize these physical systems >

Hirokazu Maruoka

Okinawa Institute of Science and Technology (OIST)

cond-mat.stat-mech

Submitted: 2026-06-15

Updated: 2026-11-04

Comments: 38 pages, 7 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 77/100

The gist: In this work, self-similarity is formulated from the perspective of scale invariance to provide a unified framework for understanding dimensional analysis and classifying self-similarity in physical…

Key concepts

Self-Similarity (Scale Invariance)
This concept relates to physical systems where the behavior remains unchanged regardless of the scale at which you observe it. In this context, it is used to classify physical problems by looking at how their governing equations and solutions behave when subjected to scaling transformations.
Case I: Self-Similar Solution of the First Kind
This type arises when a problem's solution can be found directly by applying dimensional analysis. The solution form depends only on the fundamental physical parameters, suggesting a direct relationship between dimensions and the final result.
Case II & III: Self-Similar Solutions of the Second Kind (Type A and Type B)
These cases involve more complex solutions where data points do not collapse using simple dimensional analysis alone. Instead, they require specific forms for similarity parameters or power exponents that are functions of dimensionless parameters, indicating a deeper structure in the physical laws governing the system.

Terminology

Summary

In this work, self-similarity is formulated from the perspective of scale invariance to provide a unified framework for understanding dimensional analysis and classifying self-similarity in physical problems The present work provides a unified framework for understanding dimensional analysis and a universal classification of self-similarity in physical problems

Formulation of Self-Similarity Types

The paper introduces three kinds of self-similar solutions based on the forms of the similarity parameters

**-Case I. Suppose that we have the following diffusion equation [49] with the boundary condition x ∈ (−∞, ∞) and the initial condition u (0, x) = Qδ (x). p. 3

Where the paper says it

with the boundary condition x ∈ (−∞, ∞) and the initial condition u (0, x) = Qδ (x). Its solution can be expressed as u = f (t, x, D, Q) (2) where u is the concentration of the substance, t is time, x is the spatial coordinate, D is the diffusion coefficient, and Q is the total amount.

Its solution can be expressed as u = f (t, x, D, Q) (2), and its self-similar form can be obtained by simply applying dimensional analysis This case is a self-similar solution of the first kind **

**-Case II. Let us suppose the dynamical impact of a solid sphere onto a viscoelastic board [33]. p. 3

Where the paper says it

—Case II. Let us suppose the dynamical impact of a solid sphere onto a viscoelastic board [33].

In this problem, by applying dimensional analysis, we obtain δm/R = f (h/R, µE1/2ρ1/2R, ρv2iE) (5), however, the data points do not collapse by using the variables in Eq. p. 3
Where the paper says it

In this problem, by applying dimensional analysis, we obtain δm R = f h R , µ E1/2ρ 1/2R , ρv2 i E . (5) However, the data points do not collapse by using the variables in Eq.

5. The self-similar form of this problem is Π3κη = ΦΠθη1/2 (6), and the power exponents of the similarity variables are constant This case is a self-similar solution of the second kind Type A **

**-Case III. The modified groundwater flow problem [6] describes groundwater behavior by the following modified porous medium equation, ∂tH = κ∂xxH2 − 2cκ (∂xH) 2 (7), and the final self-similar form is expressed as Π η2c3−2c = Φ ζη c3−2c (10), where the power exponents of the variables constitute functions of the dimensionless parameter c This case is a self-similar solution of the second kind Type B **

Distinction Based on Scale Invariance

The distinction between similarity of the first kind and similarity of the second kind originates from the structure of physical parameters defined in Eq.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved AI can classify physical problems into three distinct self-similar solution types based on scale functions derived from units versus those associated with physical parameters. This allows for a more nuanced understanding of whether a problem exhibits similarity of the first kind, second kind Type A, or second kind Type B.

  2. The AI system can utilize dimensional analysis as a tool to determine if similarity of the first kind occurs, by checking if the scale invariance of units and that of physical parameters are equivalent. This provides a clear criterion for applying dimensional analysis effectively.

  3. The system can distinguish between self-similar solutions of the second kind Type A and Type B by analyzing whether the exponents appearing in xi are constant or depend on additional dimensionless parameters. This allows the AI to classify solutions according to the formulation of Eggers and Fontelos.

  4. The AI can perform data collapse by transforming physical parameters into similarity variables, such as those in Eq. 50, which is invariant under scale transformations of units, leading to a lower-dimensional manifold where all data points collapse onto a lower-dimensional manifold.

  5. The system can infer the structure of self-similar solutions by examining the hierarchical structure of similarity parameters, distinguishing between similarity parameters of the first class and second class as shown in Table 1.

Abstract

In this work, we formulate self-similarity from the perspective of scale invariance, where a self-similar form is understood as the transformation of a function into a form invariant under scale transformations. By applying this formulation to physical parameters, which consist of numerical values and units, it is demonstrated that dimensional analysis works for physical problems because scale invariance is partially shared between units and physical parameters. This naturally leads to the distinction between similarity of the first kind and similarity of the second kind according to whether the scale functions induced by units and those associated with physical parameters are equivalent or not. Self-similar solutions of the second kind can be further classified according to whether the power exponents of the similarity parameters include functions of dimensionless numbers. This leads to the conclusion that there are three kinds of self-similar solutions. The present work provides a unified framework for understanding dimensional analysis and a universal classification of self-similarity in physical problems.

Sources

Related papers