One-step Outcome Imputation: An Alternative to Multiple Imputation

arXiv:2606.07174 · stat.ME · Submitted 2026-06-05 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: Statistics. The day in statistics: methods, theory and the inference under them.

Tom: We're looking at the paper: "One-step Outcome Imputation".

Jane: Here's the gist of the paper. Missing outcomes in randomized controlled trials are often handled by multiple imputation (MI), with uncertainty quantified through Rubin’s rules.

Tom: The proposed one-step alternative yields asymptotically valid inference and circumvents the stochastic component of MI.

Jane: Target Parameter Definition The paper defines a target parameter based on the imputation model, which becomes E

Y (thetã ∗) ∣ A = 1: − ̃ E

Y (thetã ∗) ∣ A = 0: .

Tom: This target parameter admits a natural decomposition into the non-missing-outcome treatment effect and the missing-outcome treatment effect under the imputation model.

Title and authors: Jane: So we've seen the basics, but what are the actual suggested improvements or enhancements to this one-step approach that make it even better than just replacing multiple imputation?

Lu: One of the big advantages they highlight is that this framework allows for a natural decomposition of the targeted treatment effect into two distinct parts as we talked about earlier.

Tom: That decomposition is key because it formalizes the alignment between whatever you're measuring and the specific imputation strategy you're using, whether it's reference-based or something more complex.

Meng: If I were looking to deploy this, I’d want to know if this framework makes it easier to switch imputation models around without having to completely rebuild my entire analysis pipeline.

Jane: It does make it easier because the structure of the targeted treatment effect is defined by the model itself, so you just plug in a new imputation model and you get a corresponding target effect estimate.

Lu: They also showed that when missing data is missing at random, they can construct a doubly robust one-step estimator.

Tom: Doubly robust means if you correctly specify both the primary treatment effect model and the nuisance models for the imputation, you get a consistent estimator of that causal target parameter E of Y given A equals a.

Jane: That's huge because it gives us a way to get causal inference even when we don't have perfect knowledge about all the underlying models involved.

Lu: They also showed that they can use their framework to estimate the non-missing outcome treatment effect and the missing outcome treatment effect separately, which is valuable for understanding how those effects interact.

Meng: Separating them sounds like it could be useful for debugging model assumptions at scale, because you can check if the imputation model is behaving correctly on one part of the result while keeping an eye on the other.

Tom: It gives us a way to systematically test if our imputation strategy is leading us down the right path, rather than just accepting a single complicated imputed result.

The paper's summary: Jane: So we're wrapping up. What's the big picture for someone who just listens to this show? What does this whole paper actually mean for how we handle missing data in clinical trials?

Tom: The main implication is that we have a method that avoids the stochastic and computationally costly aspects of multiple imputation while always providing valid asymptotic inference.

Lu: It shifts the focus from resampling methods to explicitly modeling the treatment effect implied by a given imputation model, which is conceptually equivalent to performing infinite multiple imputations based on that model.

Meng: So for me, it means we can potentially build faster and more robust tools for real-world deployment because they aren't bogged down by the computational overhead of repeated imputation.

Jane: And the paper demonstrates that this one-step outcome imputation method is implemented in a targeted R package, making it accessible for researchers who want to use this approach right away.

Tom: It’s a practical tool that circumvents the need for repeated imputation or resampling methods employed by Bartlett two thousand twenty-three and Wolbers et al <ref:2606.07174#pg1>. two thousand twenty-two while ensuring valid inference without potentially time-consuming procedures <ref:2606.07174#pg1>.

Lu: The targeted treatment effect admits a natural decomposition into the non-missing outcome treatment effect and the missing outcome treatment effect under the imputation model, enabling a formalized and transparent alignment between estimation procedures and intercurrent event strategies.

Meng: And that transparency is exactly what production systems need to see when they are trying to ensure results are sound.

Jane: So, in summary, this paper introduces One-step Outcome Imputation: An Alternative to Multiple Imputation as a new way to estimate missing data that's valid asymptotically and avoids the computational burden of MI.

Tom: It’s a powerful tool because it explicitly targets the treatment effect implied by an imputation model and allows us to separate the estimation properties from structural assumptions.

Lu: And if we allow for flexible modeling of those nuisance models, this doubly robust one-step estimator becomes a consistent estimator of the causal target parameter E of Y given A equals a.

Meng: It's solid stuff, and it shows that when you have good imputation models, you can get efficient results without needing to run an endless number of simulations.

The paper's improvements: Jane: So we talked about how this paper is different from standard multiple imputation methods, but what are these suggested improvements to this one-step approach?

Tom: The authors suggest they can implement this targeted one-step imputation procedure in an R package, which means researchers can get that valid inference without needing to rely on multiple imputations at all.

Lu: That’s a big deal because it cuts out the stochastic part and the computational load of multiple imputation, leading to estimation that is much faster and less complex.

Meng: If I were deploying this, being able to run it quickly on real traffic data without running a thousand simulations is exactly what I need.

Jane: They also showed that this framework allows for a natural decomposition of the targeted treatment effect into two parts: the non-missing outcome treatment effect and the missing outcome treatment effect under their imputation model.

Tom: That decomposition is pretty powerful because it formalizes how you align your estimation procedures with your specific imputation strategy, like whether you're using reference-based or another method.

Lu: It means you can have a clear, transparent way to check if your chosen imputation strategy is actually leading you to the right effect estimate.

Meng: That sounds useful for debugging model assumptions at scale; it lets you check one part of the result while keeping an eye on the other part.

Jane: And they also pointed out that the one-step estimator can easily incorporate covariate adjustment through something called randomization augmentation, which leads to consistent and efficient estimation in randomized clinical trials.

Tom: That augmentation term is constructed specifically to improve efficiency by incorporating information on those baseline covariates, and it gives us a much tighter estimate than just using the raw data.

Lu: The final influence function for that augmented one-step estimator has a complex expression, but they showed how to derive the asymptotic distribution for the part of that function related to the missing outcome effect using something called a von Mises expansion.

Meng: So what’s really interesting is how they project that influence function onto a specific space defined by covariate adjustment, which yields an efficient influence function for the augmented estimator.

Jane: This projection actually gives you consistent and efficient estimation in randomized clinical trials, and it only gets its full advantage if you allow for flexible modeling of those nuisance models.

Tom: And they showed that when the data are independent and identically distributed, this one-step procedure yields an estimate of the causal target parameter that is asymptotically equivalent to what multiple imputation gives you.

Lu: They proved this equivalence by decomposing the difference between Monte Carlo error and parameter estimation error terms, which shows how well this method mimics standard procedures in simple cases.

Meng: If we're dealing with iid data, it seems like we can trust this one-step estimator as a reliable stand-in for more intensive methods.

Jane: So, while the framework is powerful and efficient when you allow for flexible model specification, they also showed specific comparisons against multiple imputation results in real scenarios.

Tom: In reference-based imputation, they found that while both estimators are unbiased, the standard errors from multiple imputation were on average twenty percent higher than the standard deviation from their one-step estimator.

Lu: That’s a significant finding because it shows that you can get comparable accuracy without those massive uncertainty penalties associated with multiple imputation in some specific setups.

Meng: And they also looked at retrieved dropout imputation, and when using Rubin’s rules based multiple imputation, the standard error was actually three point six percent lower than the standard deviation from their one-step estimator.

Jane: So for complex scenarios like that, the one-step estimator provides valid inference where the multiple imputation approach is liberal because it underestimates the uncertainty.

Tom: It seems this targeted method is a serious contender when you need speed and validity without running a massive resampling operation every time.

Lu: And they also demonstrated that if you assume missing data is missing at random, you can construct a doubly robust one-step estimator that gives you a consistent estimate of the causal target parameter E of Y given A equals a.

Meng: That’s the real kicker for causal inference; getting consistency when your assumptions about the data structure aren't perfect.

Jane: So, to wrap up this segment, we've seen how this one-step approach provides speed and efficiency while keeping things valid asymptotically, and it even offers a way to get doubly robust results under specific assumptions.

Tom: Next time we talk about how these methods handle missing data in more complex causal structures.

Conclusion: Jane: So we’re wrapping up our look at "One-step Outcome Imputation: An Alternative to Multiple Imputation." This paper basically shows how you can get valid results without having to run the heavy computational load of multiple imputation.

Tom: Right, it’s about taking that missing data problem and solving it in a single step by defining a target parameter based on the imputation model.

Lu: It formalizes the alignment between what you're measuring and your specific imputation strategy, which is pretty transparent for researchers trying to understand their own methods.

Meng: So for me, it means I can build tools that are faster to run in production because they don't require running thousands of simulations every time a model needs an outcome estimate.

Jane: And they showed that the one-step estimator can use covariate adjustment through randomization augmentation, which makes the estimation consistent and efficient when you’re in a randomized clinical trial setting.

Tom: That augmentation term is specifically built to improve efficiency by incorporating baseline covariate information, and it gives us a tighter result than just using the raw data.

Lu: They also proved that for independent data, this one-step procedure yields an estimate of the causal target parameter that is asymptotically equivalent to what multiple imputation gives you.

Meng: So if you're dealing with iid data, this one-step method seems like a reliable substitute for more intensive methods.

Jane: And they also showed specific comparisons against multiple imputation results in reference-based scenarios, showing that while both are unbiased, the uncertainty penalties from multiple imputation can be much higher sometimes.

Tom: In those reference-based cases, the standard errors from multiple imputation were on average twenty percent higher than the one-step estimator’s standard deviation.

Lu: That is a pretty significant finding because it shows you can get comparable accuracy without those massive uncertainty penalties associated with multiple imputation in some setups.

Meng: And for complex scenarios like retrieved dropout, when using Rubin’s rules based multiple imputation, the standard error was actually three point six percent lower than the one-step estimator’s standard deviation.

Jane: So for those tricky settings, the one-step method provides valid inference where Rubin’s rules based multiple imputation is liberal because it underestimates the uncertainty.

Tom: It seems this targeted method is a serious contender when you need speed and validity without running a massive resampling operation every time.

Lu: And they also demonstrated that if you assume missing data is missing at random, you can construct a doubly robust one-step estimator that gives you a consistent estimate of the causal target parameter E of Y given A equals a.

Meng: That’s the real kicker for causal inference; getting consistency when your assumptions about the data structure aren't perfect.

Jane: So to wrap up, "One-step Outcome Imputation: An Alternative to Multiple Imputation" provides a way to be efficient and valid asymptotically while also offering doubly robust results under certain assumptions.

Tom: It’s a powerful tool because it explicitly targets the treatment effect implied by an imputation model and lets us separate the estimation properties from structural assumptions.

Lu: And if we allow for flexible modeling of those nuisance models, this doubly robust one-step estimator becomes a consistent estimator of the causal target parameter E of Y given A equals a.

Meng: It’s solid stuff, and it shows that when you have good imputation models, you can get efficient results without needing to run an endless number of simulations.

Jane: Next time we talk about how these methods handle missing data in more complex causal structures.

Andreas Nordland, Klaus Kähler Holst, David Redek, Christian Pipper, Aske Thorn Iversen

Novo Nordisk A/S

stat.ME

Submitted: 2026-06-05

Updated: 2026-11-03

License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/

Importance score: 92/100

The gist: Missing outcomes in randomized controlled trials are often handled by multiple imputation (MI), with uncertainty quantified through Rubin’s rules.

Key concepts

Target Parameter
This is a specific quantity derived from the imputation model, representing the difference between expected outcomes under different treatment assignments. It can be naturally split into the effect of missing outcomes and non-missing outcomes, providing a clear framework for analysis.
One-Step Estimator
This is an alternative to MI that estimates missing data in a single step. It circumvents the computational cost and stochastic errors associated with repeated imputation methods while still ensuring valid asymptotic inference, making it faster and less complex.
RCT-Augmented Estimator
This enhancement incorporates information from baseline covariates (X) into the one-step estimator. By projecting the influence function onto a space defined by covariate adjustment, this method achieves consistent and efficient estimation of treatment effects in randomized trials.

Terminology

Summary

Missing outcomes in randomized controlled trials are often handled by multiple imputation (MI), with uncertainty quantified through Rubin’s rules. p. 1 The proposed one-step alternative yields asymptotically valid inference and circumvents the stochastic component of MI. p. 0

Target Parameter Definition

The paper defines a target parameter based on the imputation model, which becomes E[Y (thetã ∗) ∣ A = 1] − ̃ E[Y (thetã ∗) ∣ A = 0]. This target parameter admits a natural decomposition into the non-missing-outcome treatment effect and the missing-outcome treatment effect under the imputation model. p. 1 The target parameter can be rewritten as E [ΔY ∣ A = a] + P(Δ = 0 ∣ A = a) E[U(X, A, Z; theta∗) ∣ Δ = 0, A = a]. p. 2

Estimation Methodology

The estimation procedure aims to separately estimate three sub-target parameters: ΨΔY = E [ΔY ∣ A = a], ΨΔ = P(Δ = 0 ∣ A = a), and ΨU = E[U(X, A, Z; theta∗) ∣ Δ = 0, A = a]. For each sub-target parameter, the influence function of the corresponding estimator is calculated to construct a plug-in estimator for ΨỸ using the above formula and provide inference via the delta method for influence functions. p. 5

Imputation Model Examples

The framework accommodates different imputation strategies through concrete examples, including reference-based imputation, retrieved-dropout imputation, and a hypothetical strategy. Reference-based imputation constructs an imputation model that approximates the observed-data conditional outcome in the reference arm and uses a logistic model as the working model. p. 0 Retrieved-dropout imputation allows for different imputation strategies depending on the occurrence of intercurrent events (ICEs). p. 0

Simulation Results and Comparison

Simulation studies benchmark the one-step estimator against MI, confirming that while both estimators are unbiased and have similar empirical means, the MI standard errors are on average 20% higher than the standard deviation in reference-based imputation. In retrieved-dropout imputation, inference based on Rubin’s rules is liberal because the mean standard error of the MI estimator is 3. p. 06% lower than the standard deviation. p. 0

Augmentation for Efficiency

Treatment randomization allows for efficiency gains via covariate adjustment, leading to an RCT-augmented one-step estimator. This augmentation term is constructed to improve the efficiency of the estimator by incorporating information on baseline covariates X. p. 5 The final influence function for the RCT-augmented one-step estimator is given by a complex expression involving terms related to the imputation model and covariate adjustment. p. 5

Target Parameter Implied by Multiple Imputation

The paper demonstrates that in the case where data are iid, the multiple imputation procedure yields an estimate of E[U(X; theta∗)] that is asymptotically equivalent to the one-step estimator. This equivalence is shown by decomposing the difference between Monte-Carlo error and parameter estimation error terms. p. 0

Pruning redundant reasoning tokens

One-step imputation is an attractive alternative to multiple imputation in randomized clinical trials. It avoids the stochastic and computationally costly aspects of multiple imputation while always providing valid asymptotic inference Furthermore, by explicitly formulating the treatment effect measure implied by a given imputation model, the framework disentangles estimation properties from structural or causal assumptions. p. 0

How the training signal is built

The asymptotic distribution of the plug-in estimator for ΨU is derived using a von Mises expansion based on an influence function decomposition. The Central Limit Theorem provides valid asymptotic inference for this plug-in estimator based on the above influence function decomposition. p. 5

Where the gains come from

The efficiency of the RCT-augmented one-step estimator is achieved by projecting the influence function onto the RCT tangent space spanned by elements of the form (A − g0(1))h(X). This projection yields an efficient influence function that incorporates covariate adjustment, leading to a consistent and efficient estimation in a randomized clinical trial. p. 1 The full advantage of the doubly robust estimation procedure is realized only if we allow for flexible modeling of the nuisance models. p. 4

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Targeted one-step imputation procedure can be implemented in an R package to provide asymptotically valid inference without relying on multiple imputations (MI). This circumvents the stochastic component and computational burden of MI, leading to less complex and computationally much faster estimation.

  2. The framework allows for a natural decomposition of the targeted treatment effect into the non-missing-outcome treatment effect and the missing-outcome treatment effect under the imputation model, enabling a formalized and transparent alignment between estimation procedures and intercurrent-event strategies.

  3. The one-step estimator can readily incorporate covariate adjustment via randomization augmentation, leading to consistent and efficient estimation in randomized clinical trials.

  4. The method circumvents the need for repeated imputation or resampling methods employed in recent proposals by Bartlett (2023) and Wolbers et al. (2022), ensuring asymptotically valid inference without potentially time-consuming procedures.

  5. For reference-based imputation, the one-step imputation estimator can be compared against MI, confirming that while both are unbiased, the estimated MI standard errors are on average 20 percent higher than the standard deviation, resulting in a coverage of 98.4% for a nominal 95 percent Wald confidence interval.

  6. For retrieved dropout imputation in complex settings like the FLOW trial example, the one-step imputation estimator provides valid inference, whereas Rubin's rules based MI is liberal, as its mean standard error is 3.6 percent lower than the standard deviation and coverage of Wald-type confidence intervals is 94.1 percent.

  7. A doubly robust one-step estimator can be constructed when a missing-at-random assumption can be justified, providing a consistent estimator of the causal target parameter E[Y | A = a] if the nuisance models are correctly specified.

Related papers