Improvise, Adapt, Overcome: An On-The-Fly Multifidelity Algorithm for Efficient Machine Learning
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: AI Radio. Generated commentary on the latest Artificial Intelligence papers.
Tom: We're looking at the paper: "Improvise, Adapt, Overcome".
Jane: Here's the gist of the paper. Machine learning has accelerated quantum chemistry but is hindered by the prohibitive cost of generating high fidelity training data <ref:2606.02662#pg2> Multifidelity machine learning (MFML) mitigates this overhead by systematically combining abundant low fidelity data with sparse high fidelity data <ref:2606.02662#pg2>.
Tom: Here, we introduce an adaptive on-the-fly multifidelity framework for machine learning that autonomously determines training dataset composition <ref:2606.02662#pg2>.
Jane: By dynamically querying training samples at each fidelity, the algorithm saturates model accuracy at lower fidelities before moving up to more expensive reference calculations <ref:2606.02662#pg2>.
Tom: We benchmark the novel adaptive-MFML across diverse chemical properties including the computational chemistry gold standard coupled cluster energies, and the more chemically challenging excitation energies <ref:2606.02662#pg2>.
Title and authors: Tom: So, we're talking about this paper now called "Improvise, Adapt, Overcome: An On-The-Fly Multifidelity Algorithm for Efficient Machine Learning". It sounds like they’re trying to solve a big problem in quantum chemistry where getting the super accurate data you need is just too expensive.
Jane: That's right, Tom. The authors are looking at how machine learning has sped up quantum chemistry but that speed comes with a huge cost for the training data itself, and this paper introduces a way to handle that overhead.
Lu: Essentially, they’re dealing with multifidelity machine learning which combines cheap low fidelity data with expensive high fidelity data. The issue is that standard methods use fixed scaling factors to decide how much of each kind of data you need across all fidelities, and those fixed rules often lead to a lot of redundant data generation.
Meng: Redundancy is the enemy when you're shipping models into production, because generating that expensive high fidelity data isn't something you want to do randomly; it has to be targeted. If the method generates too much useless data just because of a fixed ratio, it messes up the cost-benefit analysis.
Lalam: The core idea they are pushing is an adaptive on-the-fly framework that lets the machine learning model decide exactly what kind of training data it needs at each fidelity during training. It doesn't rely on pre-defined ratios anymore; it queries samples only when it actually needs them to improve its performance.
Tom: So, instead of guessing how much low fidelity versus high fidelity data you need beforehand, the AI system decides dynamically as it goes through the training process? That sounds like a big shift in how we think about training these models.
Jane: Exactly. The paper describes this adaptive framework as autonomously determining the entire training dataset composition without needing those fixed scaling factors anymore, and that means it can stop asking for expensive reference calculations once the low fidelity model is already performing well enough.
Lu: They describe a nested loop structure where they train an MFML model at each step and then check its error against a small set of high fidelity reference computations. If the error doesn't drop enough, it moves to the next, more expensive fidelity to query for more data.
Title and authors: Meng: I like that idea of on-the-fly querying; it means they aren't just throwing thousands of expensive calculations at the wall hoping some useful ones show up. That sounds much smarter for managing a budget.
Lalam: They emphasize that this method ensures the model accuracy meets a user defined threshold by recursively adding training samples at each fidelity, which is how they minimize the empirical error of the resulting MFML model.
Tom: And they benchmarked this against standard methods, and the results show something pretty significant about cost reduction. The paper claims this adaptive-MFML can reduce data generation costs by up to a factor of thirty compared to single fidelity methods.
Jane: A thirty fold improvement over single fidelity methods is substantial, Tom. It suggests that this approach establishes a high accuracy low cost pathway for sustainable machine learning in quantum chemistry.
Lu: They also compared it against the standard multifidelity machine learning approach where sparsity was dictated by that conventional fixed scaling factor of two, and they found the adaptive-MFML improved upon standard MFML by up to a factor of five.
Meng: Five fold improvement over standard MFML is impressive, but what about the practical deployment side? Does this dynamic sampling create any new bottlenecks when you try to run this on a large problem set?
Lalam: The paper does mention one limitation, which they call a sequential limitation: because reference calculations are on demand, the data generation process becomes sequential instead of being fully parallelized like in standard MFML.
Tom: Sequential is always something I watch out for when talking about scaling; if you have to wait for each step before starting the next one, that adds up fast when you're trying to train something big.
Jane: So, the authors suggest a way around that serialization by using pre-trained global machine learning interatomic potentials, which would allow this modular adaptive algorithm to integrate with active learning schemes more smoothly.
Lu: Another promising direction they point out is treating the dataset size at each fidelity as hyperparameters that can be optimized using a differentiable objective function, which could lead to even finer control over the cost-accuracy tradeoff.
Meng: If we can optimize those sizes through a differentiable function, that moves us closer to something that actually learns the optimal data strategy for us instead of relying on manual tuning. That would be way more useful for production environments.
Title and authors: Lalam: So, to wrap up this paper "Improvise, Adapt, Overcome: An On-The-Fly Multifidelity Algorithm for Efficient Machine Learning", they show how to dynamically determine the training data composition by querying samples at each fidelity to saturate accuracy before moving up in cost.
Tom: It’s a clean mechanism because it directly addresses the data redundancy issue that plagues most multifidelity methods, which is a real pain point in quantum chemistry workflows.
Jane: The results are solid across different chemical properties, from coupled cluster energies to more complex excitation energies on the QeMFi dataset. They show high accuracy with much lower time costs than previous benchmarks for both types of calculations.
Lu: The work shows it works for a broad range of QC properties, which is important because it's not just a niche solution for one specific type of molecular energy calculation.
Meng: As an engineer, I look at the time cost budget they use, like achieving a target error on CH3Cl in about one thousand five hundred hours with this method, and that's actually quite fast when you compare it to the previous single fidelity approach.
Lalam: The overall cost for the MFML model with this specific training data structure is measured at one thousand five hundred twenty-nine point eight seconds, which confirms that their efficiency gain translates directly into robust individual molecular predictions.
Tom: So, we have a framework that lets the AI intelligently manage its own data needs to keep costs down while maintaining high accuracy across various chemical problems. It’s a solid piece of work for making these expensive calculations more accessible.
Jane: It certainly seems like they’ve moved beyond just combining data; they've built an intelligent system that manages the entire sampling process dynamically to find the best cost-accuracy tradeoff.
Lu: The implication is that we can start using these machine learning models for even more challenging quantum chemistry problems where generating full high fidelity datasets would otherwise be completely infeasible.
Meng: For production, this means we can keep our training cycles much tighter because we're not wasting compute time on data we already have or data that won't help us improve the model accuracy.
Lalam: This paper, "Improvise, Adapt, Overcome: An On-The-Fly Multifidelity Algorithm for Efficient Machine Learning", gives us a concrete way to reduce the prohibitive cost of generating high fidelity training data by making the AI system adapt its sampling strategy on demand.
The paper's summary: Tom: So, we've been looking at how machine learning in quantum chemistry gets bogged down by the sheer cost of generating super accurate training data, and this paper is about fixing that using a new method called adaptive multifidelity machine learning.
Jane: It basically takes a system that usually uses fixed rules to decide how much cheap low-fidelity data you need versus expensive high-fidelity data, and instead, the AI system decides for itself what kind of training samples it actually needs at every single fidelity level during the training process.
Lu: The core idea is that instead of pre-defining a ratio between fidelities—like saying use two units of low fidelity for every one unit of high fidelity—the algorithm dynamically queries those training samples on the fly, adjusting its strategy based on how much error it’s currently seeing.
Meng: So, if the model isn't getting better fast enough at a certain level, it just keeps asking for more data at that same level until it hits a stopping point before moving up to the next expensive one. That sounds like smart resource management.
Tom: Exactly, and the paper shows that this adaptive approach doesn't just work; it actually reduces data generation costs by up to a factor of thirty compared to using standard single-fidelity methods, and improves upon basic multifidelity machine learning by about a factor of five.
Jane: That cost reduction is huge, Tom. For someone listening who doesn't read papers, that means the AI can learn what it needs without throwing away massive amounts of expensive high-fidelity calculations just because some old rule told it to do so.
Lu: The results are strong across different chemical properties, covering everything from calculating potential energy surfaces to figuring out how molecules react when they get excited, like those excitation energies. The system handles both the standard gold standard coupled cluster energies and more difficult ones.
Meng: From a production standpoint, what I’m interested in is that this method minimizes data redundancy because it only generates the data that actually helps improve the model, which means less wasted compute time compared to just blindly following a fixed scaling factor rule.
Tom: And there's a caveat they mention—since the algorithm has to query samples on demand, it introduces a sequential limitation on data generation, meaning it’s not as fully parallelized as some standard multifidelity methods.
Jane: They suggest that this serialization can be fixed by integrating pre-trained global machine learning interatomic potentials, which would let this adaptive algorithm work much better with active learning schemes.
Lu: Another idea they are exploring is using a differentiable objective function to treat the dataset size at each fidelity as hyperparameters that the AI can optimize, which could really refine how it finds that sweet spot between cost and accuracy.
Meng: If we can tune those sizes through a differentiable function, then we move from having a fixed strategy to having the AI autonomously learn its own data-saving strategy, which is exactly what we want for scaling up these models.
Tom: So, to sum it up, this paper presents an adaptive on-the-fly framework that lets the machine learning model autonomously determine its training data composition by querying samples at each fidelity to saturate model accuracy before moving up to more expensive reference calculations.
Jane: It’s a big deal because it shows a path toward sustainable cost-aware machine learning in quantum chemistry, making those super accurate predictions accessible without the prohibitive data costs we used to face.
The paper's improvements: Tom: So, we've been talking about how standard multifidelity machine learning methods struggle because they rely on those fixed scaling factors for data ratios, and this paper introduces a much smarter approach to that sampling problem.
Jane: It’s like a traditional method uses a set recipe for mixing ingredients, but this new method lets the AI chef decide exactly how much of each ingredient to add right there as it cooks, based on what it’s already tasting.
Lu: The main improvement is that the AI autonomously determines the training dataset composition by querying training samples at every fidelity level to saturate model accuracy before moving up to more expensive reference calculations.
Meng: So, instead of blindly generating a fixed number of data points for each fidelity, the algorithm dynamically queries samples only when it needs them to improve its performance. That means we're not wasting compute on data that won't help us improve the model accuracy at all.
Tom: That dynamic querying is what lets them achieve a significant cost reduction, showing up as a factor of thirty improvement over single fidelity methods for something like CH three chlorine.
Jane: Thirty times better is huge, Tom. It means we can get that high accuracy without needing to run a massive number of those super expensive high-fidelity calculations that used to be the bottleneck in quantum chemistry modeling.
Lu: They also beat standard multifidelity machine learning by about a factor of five, which suggests this isn't just a small tweak; it’s fundamentally changing how we handle the trade-off between accuracy and computational cost.
Meng: I need to hear more about how much redundancy they actually cut down. In production, redundant data is just wasted time and money on hardware.
Tom: They show that by minimizing that redundancy through this adaptive sampling, the overall cost for training this model drops significantly to about one thousand five hundred twenty-nine point eight seconds for a specific example.
Jane: That number really grounds it, Tom. It shows the efficiency gain translates into actual, fast individual molecular predictions rather than just theoretical gains on a benchmark.
Lu: The implication is that this establishes a high accuracy low cost pathway for sustainable machine learning in quantum chemistry where we don't have to pre-calculate everything at once.
Meng: For me, it changes how I think about deploying these models because if you can learn the optimal data strategy dynamically, you can build systems that are much more resilient to real-world computational constraints.
Tom: It means we shift the focus from just having big datasets to having intelligent systems that know when and where to spend their compute budget.
Jane: So, this paper moves us from a static data problem to a dynamic learning process that manages its own expenses in real time.
Lu: The future work they suggest is pretty interesting, looking at how we can use pre-trained global machine learning interatomic potentials to fix the sequential limitation they found in their on-the-fly sampling.
Meng: A pre-trained potential sounds promising because it would allow this modular adaptive algorithm to integrate much more smoothly into larger active learning schemes, which is what we need for really big problems.
Tom: So, while the dynamic sampling is powerful, the authors admit that it forces a sequential flow on data generation, which they acknowledge as a limitation right now.
Jane: Exactly. The system works well for finding the optimal balance in terms of accuracy versus cost for molecules like CH three chlorine and excitation energies on QeMFi data.
Lu: They also point out that treating the dataset size at each fidelity as hyperparameters you can optimize with a differentiable objective function is a really promising direction for future research.
Meng: That optimization idea sounds like something we could actually implement; it moves us toward training systems that are self-optimizing for cost efficiency without needing manual tuning every single time.
Tom: This whole paper is about building a more intelligent way to handle data in quantum chemistry, moving beyond just combining different fidelity datasets.
Jane: So, the big picture here is that we can start using these machine learning models for even more challenging quantum chemistry problems where generating full high fidelity datasets would otherwise be completely infeasible.
Conclusion: Tom: So, we've seen how this paper, "Improvise, Adapt, Overcome: An On-The-Fly Multifidelity Algorithm for Efficient Machine Learning", shows us a way to stop wasting computational resources by letting the AI manage its own data needs during training.
Jane: It really boils down to this idea that instead of using static rules for how much low fidelity versus high fidelity data you need, the AI system learns how to sample on demand until it hits a certain accuracy target at each level.
Lu: The main implication is that we can achieve very high accuracy in quantum chemistry applications—like coupled cluster energies and excitation energies—while drastically cutting down the time cost compared to older methods.
Meng: From a production standpoint, this means models can be trained much faster because they aren't just throwing thousands of expensive reference calculations at the wall; they are actually targeted.
Tom: It’s exciting because it proves that we can build a pathway for sustainable cost-aware machine learning in quantum chemistry where data generation isn't the bottleneck anymore.
Jane: I think what this paper really changes is how we think about training—it shifts the focus from just building a big dataset to building an intelligent system that knows when and where to spend its compute budget.
Lu: The future work they mentioned about using pre-trained global machine learning interatomic potentials sounds like a way to overcome the sequential limitation they found in their current on-the-fly sampling method.
Meng: If we can integrate that modular approach, it opens up possibilities for much larger and more complex molecular systems that are currently too slow to train with these methods.
Tom: It’s a solid piece of work because it provides concrete numbers showing a factor of thirty improvement over some single fidelity methods, which is exactly what we need to see in the field.
Jane: It’s a really interesting way to think about data efficiency in science—it shows that being smart about your data strategy can be just as important as having the most expensive reference calculations.
Lu: So, this paper gives us a concrete mechanism for how an AI can autonomously manage its own training process to find the best cost-accuracy tradeoff.
Meng: And that’s the hook for next time—we need to see if we can actually integrate these adaptive strategies into larger, more complex molecular simulations on real traffic data.
School of Mathematics and Natural Sciences, University of Wuppertal
cs.LG, cs.AI, physics.chem-ph
Submitted: 2026-06-01
Updated: 2026-10-31
Comments: Supplementary Information added within the main text towards the end; updated several things in main text and added several things in SI
License: http://creativecommons.org/licenses/by/4.0/
Importance score: 88/100
The gist: Machine learning has accelerated quantum chemistry but is hindered by the prohibitive cost of generating high fidelity training data <ref:2606.02662#pg2> Multifidelity machine learning (MFML)…
Key concepts
- Multifidelity Machine Learning (MFML)
- MFML combines abundant, cheap low-fidelity data with sparse, expensive high-fidelity data. The goal is to use the cheap data to train a model first, then strategically use the expensive data only when necessary to improve accuracy. This strategy helps manage the high cost of generating truly accurate quantum chemistry calculations.
- Adaptive On-the-Fly Framework
- This is a novel approach where the algorithm doesn't pre-determine all training data. Instead, it operates in a loop: it starts with low-fidelity data, trains a model, and checks its error. If the error isn't low enough, it moves to higher fidelities only for that specific part of the model. This ensures expensive calculations are only performed when they provide the most benefit.
- Error Reduction Threshold
- The algorithm uses a predefined local tolerance or threshold for prediction error during training. It continues adding training samples at the current fidelity until this error reduction target is met. Once achieved, it moves to the next, more expensive fidelity. This prevents wasting computational resources on data that does not significantly improve the model's performance.
Terminology
Summary
Machine learning has accelerated quantum chemistry but is hindered by the prohibitive cost of generating high fidelity training data <ref:2606. p. 0 E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. In spite of its success, standard
MFML schemes rely on pre-defined scaling factors to determine sparse data ratio
across fidelities, often generating redundant multifidelity data resulting in a loss
of efficiency. Here, we introduce an adaptive on-the-fly multifidelity framework
for machine learning that autonomously determines training dataset composition. Here, we introduce an adaptive on-the-fly multifidelity framework
for machine learning that autonomously determines training dataset composition. By dynamically querying training samples at each fidelity, the algorithm
saturates model accuracy at lower fidelities before moving up to more expensive
reference calculations. By dynamically querying training samples at each fidelity, the algorithm
saturates model accuracy at lower fidelities before moving up to more expensive
reference calculations. We benchmark the novel adaptive-MFML across diverse
chemical properties including the computational chemistry gold standard coupled cluster energies, and the more chemically challenging excitation energies. We benchmark the novel adaptive-MFML across diverse
chemical properties including the computational chemistry gold standard coupled cluster energies, and the more chemically challenging excitation energies. In our numerical experiments we show that our adaptive algorithm reduces data
generation costs by up to a factor of 30 compared to single fidelity methods
and improves upon standard MFML by up to a factor of 5. In our numerical experiments we show that our adaptive algorithm reduces data
generation costs by up to a factor of 30 compared to single fidelity methods
and improves upon standard MFML by up to a factor of 5. The mitigation of
data redundancy establishes a high-accuracy low-cost pathway for sustainable
cost-aware machine learning in quantum chemistry.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Pruning redundant reasoning tokens
The standard multifidelity methods rely on pre-defined scaling factors to determine sparse data ratio across fidelities, often generating redundant multifidelity data resulting in a loss of efficiency <ref:2606.02662#pg2>. Conventionally, the scaling factor is set to 2 <ref:2606. p. 1 In spite of their success, standard MFML methods address data sparsity with
increasing fidelity by relying on a fixed scaling factor to determine the ratio of training samples between two fidelities. Conventionally, the scaling factor is set to 2 [9, 10]
derived from legacy of sparse grid combination techniques [19]. Conventionally, the scaling factor is set to 2 [9, 10]
derived from legacy of sparse grid combination techniques [19]. Other fixed values of
the scaling factor have been explored indicating that larger values improve the costbenefit effectiveness of the MFML models [16, 17]. Other fixed values of
the scaling factor have been explored indicating that larger values improve the costbenefit effectiveness of the MFML models [16, 17]. An alternate approach for the use
of multifidelity methods in ML-QC introduced an ad-hoc heuristic to dictate training
data set sizes across fidelities omitting the fixed scaling factor [14]. An alternate approach for the use
of multifidelity methods in ML-QC introduced an ad-hoc heuristic to dictate training
data set sizes across fidelities omitting the fixed scaling factor [14]. The scheme, hierarchical ML, uses several ∆-ML models [7] and assumes a constant ratio of predictions
between two ∆-ML models for subsequent fidelities remains approximately constant. An alternate approach for the use
of multifidelity methods in ML-QC introduced an ad-hoc heuristic to dictate training
data set sizes across fidelities omitting the fixed scaling factor [14]. The scheme, hierarchical ML, uses several ∆-ML models [7] and assumes a constant ratio of predictions
between two ∆-ML models for subsequent fidelities remains approximately constant. and ad-hoc estimated training dataset sizes fail to dynamically capture the true costbenefit contribution of each fidelity during training the MFML model. Inevitably, this
leads to an increased risk of redundancy of costly training data generation requiring
manual post-hoc intervention. and ad-hoc estimated training dataset sizes fail to dynamically capture the true costbenefit contribution of each fidelity during training the MFML model. Inevitably, this
leads to an increased risk of redundancy of costly training data generation requiring
manual post-hoc intervention.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
How the training signal is built
The adaptive algorithm operates in a nested loop structure <ref:2606.02662#pg2>. In the local loop (hereon also referred to as an epoch), the algorithm dynamically adds training data starting with the lowest fidelity <ref:2606. p. 2 The algorithm itself operates in a nested loop structure. In the local
loop (hereon also referred to as an epoch), the algorithm dynamically adds training
data starting with the lowest fidelity. In the local
loop (hereon also referred to as an epoch), the algorithm dynamically adds training
data starting with the lowest fidelity. During each epoch, an MFML model of the
corresponding training data set composition is trained and evaluated against a small
validation set of high-fidelity reference computations to keep track of the prediction
error computed as the mean absolute error (MAE; see section 4. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606. To avoid preasymptotic artifacts that arise due to very small dataset sizes, the improvement of
the MFML model is assessed over a moving average of the MAE. If the improvement
falls below a predefined local tolerance, the algorithm advances to the next fidelity to
carry out on-the-fly querying of training data. the addition of a geometry with high fidelity reference computed should give better
prediction accuracy compared to the same geometry with a low fidelity reference. This step-wise progression of fidelities is carried out until the highest fidelity is
reached, completing one global loop. This step-wise progression of fidelities is carried out until the highest fidelity is
reached, completing one global loop. On completing a global loop, the algorithm checks
the overall error reduction across the full pass from lowest to highest fidelity. On completing a global loop, the algorithm checks
the overall error reduction across the full pass from lowest to highest fidelity. If the
error has improved compared to the previous pass, the sequence restarts at the lowest
fidelity.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the gains come from
The core ML architecture used in this work is Kernel Ridge Regression (KRR) motivated by its proven robustness in multifidelity QC applications <ref:2606.02662#pg2>. The adaptive-MFML method is benchmarked against two baselines: a single fidelity KRR model trained only on highest fidelity data, and a standard MFML model where data sparsity is dictated by the conventional fixed scaling factor of 2 <ref:2606. p. 4 We simulate the on-the-fly nature of the
adaptive-MFML algorithm by querying the pre-computed QC reference values from
the datasets only when requested in the epoch. The adaptive-MFML method is
benchmarked against two baselines: a single fidelity KRR model trained only on
highest fidelity data, and a standard MFML model where data sparsity is dictated by
the conventional fixed scaling factor of 2 (that is, N
f−1
train = 2 · N
f
train). 2 Time-cost of training data versus MAE for prediction of ab initio potential energy surfaces
at the CCSD(T) level for CH3Cl and CH3F of the VIB5 dataset[21]. The adaptive-MFML model
achieves the target MAE at a significantly lower computational cost than both standard MFML and
single fidelity KRR. To
achieve this accuracy, single fidelity KRR demands Ttrain =∼ 45, 000 hrs of compute
budget whereas the standard MFML model requires ∼ 7, 500 hrs. Remarkably, the
adaptive-MFML reaches this target error with just ∼ 1500 hrs. Remarkably, the
adaptive-MFML reaches this target error with just ∼ 1500 hrs. This translates to a
30-fold improvement over single fidelity KRR and a 5-fold reduction of time cost in
comparison to the standard MFML approach.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Efficiency across chemical properties
The broad applicability of the proposed adaptive-MFML framework across diverse QC properties is demonstrated by predicting properties ranging from ab initio potential energy surfaces (PES) to more complex excitation energies <ref:2606.02662#pg2>. For coupled cluster energies, the adaptive-MFML model reaches a target accuracy of ∼ 10 kcal/mol with a time-cost budget of ∼ 3 hours, which is an 8-fold improvement over single fidelity KRR and a little over a 2-fold improvement over the basic MFML approach <ref:2606. p. 7 The single fidelity KRR model requires a time-cost budget of ∼20 hours,
the basic MFML model requires ∼ 7 hours, and the adaptive-MFML model only needs
∼ 3 hours. This represents an 8-fold improvement over single fidelity KRR and a little
over a 2-fold improvement over the basic MFML approach. 2 Ground State and Vertical Excitation Energies
10
0 10
1 10
2
Ttrain [hrs]
10
1
10
2
10
3
10
4
MAE (TZVP) [kcal/mol]
10
20
35
SCF
10
0 10
1 10
2
Ttrain [hrs]
10
1
MAE (TZVP) [kcal/mol]
EV
Single Fidelity KRR
MFML
Adaptive-MFML
Fig. 3 Model error (MAE) as a function of training data generation time-cost for single fidelity
KRR, basic MFML, and adaptive-MFML on the QeMFi dataset [22, 23].Where the paper says it
Where the paper says it
Limitations and future directions
One immediate observation is that dataset generation for standard MFML allows for parallelization of training data generation across fidelities whereas in the adaptive-MFML algorithm, since reference calculations are on demand, it introduces a sequential limitation on the data generation <ref:2606.02662#pg2>. One potential solution to this serialization is the use of pre-trained global machine learning interatomic potentials (MLIPs) <ref:2606.02662#pg2>. The modular nature of the adaptive algorithm enables seamless integration with such active learning schemes to further improve the cost efficiency of multifidelity methods <ref:2606. p. 0 In spite of its success, standard
MFML schemes rely on pre-defined scaling factors to determine sparse data ratio
across fidelities, often generating redundant multifidelity data resulting in a loss
of efficiency. Here, we introduce an adaptive on-the-fly multifidelity framework
for machine learning that autonomously determines training dataset composition. While the adaptive-MFML framework demonstrates high efficiency and accuracy
in the results above, several open areas of research can be identified. Formulating the
dataset size at each fidelity as hyper-parameters to be optimized via a differentiable
objective function is one such promising direction.Where the paper says it
Where the paper says it
Error metrics and cost analysis
The prediction error of ML models studied in this work are computed as the mean absolute error (MAE) over a holdout test dataset U F:= 4) MAE:= N Xtest i=1 yF i − PML(xi) <ref:2606.02662#pg2>. The cost of a single fidelity model is T SFtrain:= NF · cF where cF is the cost of a single data point at fidelity F <ref:2606. p. 4 We analyze
the MAE of each model as a function of the cumulative time-cost incurred in training
data generation ( see section 4. For single fidelity models, the cost is the product of
the highest fidelity per sample cost and the training set size. Given a fixed budget of, say, 100 hours, the single-fidelity model
KRR results in an MAE of ∼35 kcal/mol, and the standard MFML model reduces
this to about 20 kcal/mol. In contrast the adaptive-MFML model achieves an MAE of
∼10 kcal/mol representing a little over 3-fold improvement over single fidelity KRR,
and a 2-fold improvement in accuracy over basic MFML. 4; ∼ 89 hours of time-cost), a single fidelity KRR model trained on 26 CCSD(T)
samples (∼3 hours of time-cost), and the adaptive-MFML model (∼ 3 hours of time-cost). The
adaptive-MFML model consistently achieves the lowest MAE, confirming that the efficiency gain
translates into robust individual molecular predictions. 4; ∼ 89 hours of time-cost), a single fidelity KRR model trained on 26 CCSD(T)
samples (∼3 hours of time-cost), and the adaptive-MFML model (∼ 3 hours of time-cost). The
adaptive-MFML model consistently achieves the lowest MAE, confirming that the efficiency gain
translates into robust individual molecular predictions. The scheme, hierarchical ML, uses several ∆-ML models [7] and assumes a constant ratio of predictions
between two ∆-ML models for subsequent fidelities remains approximately constant. This scheme was shown to be effective in reducing training data costs for a specific isolated small molecule by a factor of 100. The scheme, hierarchical ML, uses several ∆-ML models [7] and assumes a constant ratio of predictions
between two ∆-ML models for subsequent fidelities remains approximately constant. This scheme was shown to be effective in reducing training data costs for a specific isolated small molecule by a factor of 100. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Data availability and code access
All data used in this work comes from openly available datasets which are appropriately cited <ref:2606.02662#pg2>. The programming scripts used for this work can be openly accessed at this GitHub repository <ref:2606. p. 4 error does match the test set error indicating that the algorithm is indeed robust for
generalization. The core ML architecture used in this work is Kernel Ridge Regression
(KRR) motivated by its proven robustness in multifidelity QC applications [9, 14, 16].Where the paper says it
Acknowledgments and contributions
The authors acknowledge support by the DFG through the project ZA 1175/3-1 as well as through the DFG Priority Program SPP 2363 on ‘Utilization and Development of Machine Learning for Molecular Applications – Molecular Machine Learning’ through the project ZA 1175/4-1 <ref:2606.02662#pg2>. The authors would also like to acknowledge the support of the ‘Interdisciplinary Center for Machine Learning and Data Analytics (IZMD)’ at the University of Wuppertal <ref:2606. p. 0 Improvise, Adapt, Overcome: An On-The-Fly
Multifidelity Algorithm for Efficient Machine
Learning
Vivin Vinod1* and Peter Zaspel1
1School of Mathematics and Natural Sciences, University of Wuppertal,
Germany. *Corresponding author(s). Improvise, Adapt, Overcome: An On-The-Fly
Multifidelity Algorithm for Efficient Machine
Learning
Vivin Vinod1* and Peter Zaspel1
1School of Mathematics and Natural Sciences, University of Wuppertal,
Germany. *Corresponding author(s). 3 Coupled Cluster Energies of ANI-1ccx
10
1 10
0 10
1 10
2
Ttrain [hrs]
10
1
10
2
10
3
10
4
MAE (CCSD-T) [kcal/mol]
89
3 7 20
Single Fidelity KRR
MFML
ANI Baseline (2
11 CCSD(T))
Adaptive-MFML
Fig. 4 Training data generation time-cost versus MAE for the ANI-1ccx dataset collection of
molecules [27]. 3 Coupled Cluster Energies of ANI-1ccx
10
1 10
0 10
1 10
2
Ttrain [hrs]
10
1
10
2
10
3
10
4
MAE (CCSD-T) [kcal/mol]
89
3 7 20
Single Fidelity KRR
MFML
ANI Baseline (2
11 CCSD(T))
Adaptive-MFML
Fig. 4 Training data generation time-cost versus MAE for the ANI-1ccx dataset collection of
molecules [27].Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
References
The references listed are [1] Kennedy, M., O’Hagan, A.: Predicting the output from a complex computer code when fast approximations are available <ref:2606. p. 2 The algorithm
is shown to be robust and reduce redundancy. The broad applicability of the proposed
adaptive-MFML framework across diverse QC properties is demonstrated by predicting properties ranging from ab initio potential energy surfaces (PES) to more complex
excitation energies. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606. An assessment of these timecost learning curves provides a direct measure of data efficiency making it a critical
metric in understanding the computational footprint of cost-aware ML models in QC. 1 Coupled Cluster Potential Energy Surfaces
10
2 10
3 10
4
Ttrain [hrs]
10
0
10
1
MAE (CCSD-T) [kcal/mol]
1500 7500 45000
CH3Cl
10
2 10
3 10
4
Ttrain [hrs]
10
0
10
1
MAE (CCSD-T) [kcal/mol]
CH3F
Single Fidelity KRR
MFML
Adaptive-MFML
Fig. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. Recent applications
highlight this capability, ranging from simulating exciton energy transfer in a collection
of 85-atom porphyrins on a clay surface for synthetic light-harvesting [17] to over
3. 5 million point predictions of high fidelity excitation energies in a light harvesting
complex of photosynthetic bacteria [18]. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. Improvement
less than local
tolerance? Return Model
Move one
fidelity up
Compute
data batch
Evaluate
MFML model
Compute local
improvement
Compute global
improvement
Active
fidelity
Train
MFML model
Top
fidelity
reached? Improvement
less than local
tolerance? Return Model
Move one
fidelity up
Compute
data batch
Evaluate
MFML model
Compute local
improvement
Compute global
improvement
Active
fidelity
Train
MFML model
Top
fidelity
reached? Improvement
less than local
tolerance? Return Model
Move one
fidelity up
Compute
data batch
Evaluate
MFML model
Compute local
improvement
Compute global
improvement
Active
fidelity
Train
MFML model
Top
fidelity
reached? listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
--- Page 19 ---
The references listed are [7] Ramakrishnan, R. p. 5 listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine learning (MFML) has emerged as a prominent solution to the
training data cost bottleneck. Following the ansatz of standard multifidelity methods
[1, 2], the comprehensive correction of low fidelity ML models towards high fidelity QC
predictions has been used successfully to predict properties ranging from ground state
energies to excitation energies and bandgaps of solids showing significant reduction in
the time-cost of the ML-QC pipeline [7–12]. Multifidelity machine learning (MFML) has emerged as a prominent solution to the
training data cost bottleneck. Following the ansatz of standard multifidelity methods
[1, 2], the comprehensive correction of low fidelity ML models towards high fidelity QC
predictions has been used successfully to predict properties ranging from ground state
energies to excitation energies and bandgaps of solids showing significant reduction in
the time-cost of the ML-QC pipeline [7–12]. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. Multifidelity machine
learning (MFML) mitigates this overhead by systematically combining abundant
low fidelity data with sparse high fidelity data. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606. 1 Introduction
In computational simulations, increasing the cost-budget typically yields higher accuracy, introducing the concept of fidelities relative to a ground truth [1, 2]. The
1
arXiv:2606. For a fixed time-cost budget,
the adaptive-MFML is seen to be the most beneficial with the lowest achieved MAE for both ground
state (SCF) and vertical excitation energies (EV). The QeMFi dataset [22, 23] provides a more complex chemical challenge than the
VIB5 dataset consisting of nine chemically diverse molecules with geometries sampled
from Wigner distributions [24]. For a fixed time-cost budget,
the adaptive-MFML is seen to be the most beneficial with the lowest achieved MAE for both ground
state (SCF) and vertical excitation energies (EV). The QeMFi dataset [22, 23] provides a more complex chemical challenge than the
VIB5 dataset consisting of nine chemically diverse molecules with geometries sampled
from Wigner distributions [24]. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. *Corresponding author(s). E-mail(s): vinod@uni-wuppertal. That is, additional training data does not yield as strong an improvement
in the models’ accuracy indicating an inherent structural complexity within the data. Crucially, since this saturation is observed for single fidelity KRR and the multifidelity
models, it is not an artifact of the MFML or adaptive scheme itself but rather an
intrinsic property of the underling chemical space being learned. That is, additional training data does not yield as strong an improvement
in the models’ accuracy indicating an inherent structural complexity within the data. Crucially, since this saturation is observed for single fidelity KRR and the multifidelity
models, it is not an artifact of the MFML or adaptive scheme itself but rather an
intrinsic property of the underling chemical space being learned.Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Where the paper says it
Summary
Machine learning has accelerated quantum chemistry but is hindered by the prohibitive cost of generating high fidelity training data <ref:2606.02662#pg2>.
Standard MFML schemes rely on pre-defined scaling factors to determine sparse data ratio across fidelities, often generating redundant multifidelity data resulting in a loss of efficiency <ref:2606.02662#pg2>. This reliance on fixed heuristics limits the maximum achievable efficiency in these methods <ref:2606. p. 8 3 Discussion
The generation of high-fidelity training data remains a prohibitive hurdle for the successful and sustainable use of ML in QC. While standard MFML significantly reduces
the computational cost, reliance on rigid heuristics for training dataset composition
limits the maximum achievable efficiency in these methods.Where the paper says it
The adaptive algorithm performs on-the-fly sampling of training data at each fidelity to minimize the empirical error of the resulting MFML model <ref:2606.02662#pg2>. The algorithm ensures that the error reduction meets a user-defined threshold by recursively adding training samples at each fidelity <ref:2606. p. 2 This work introduces a novel adaptive-MFML scheme that performs on-the-fly
sampling of training data at each fidelity to minimize the empirical error of the resulting MFML model. Recursively adding training samples at each fidelity, the algorithm
ensures the error reduction meets a user-defined threshold. 1) requirement outlined in Ref. We analyze
the MAE of each model as a function of the cumulative time-cost incurred in training
data generation ( see section 4.Where the paper says it
Where the paper says it
The adaptive-MFML model achieves a 30-fold improvement over single fidelity KRR and a 5-fold reduction of time cost in comparison to the standard MFML approach for CH3Cl <ref:2606.02662#pg2>. The algorithm demonstrates high efficiency and accuracy across diverse QC properties, showing robust performance for both gold standard CCSD(T) energies and hard-to-learn excitation energies <ref:2606. p. 9 Our numerical experiments validate the efficacy of this algorithm for diverse
QC properties ranging from gold standard CCSD(T) energies to hard-to-learn excitation energies. While fixed scaling factor MFML assumes a uniform rate of information
gain across all fidelities, the adaptive method inherently measures the marginal information gain of each batch of training samples added.Where the paper says it
The prediction error of ML models studied in this work are computed as the mean absolute error (MAE) over a holdout test dataset U F:= Ntest i=1 yF i − PML(xi) <ref:2606.02662#pg2>. The adaptive-MFML model consistently achieves the lowest MAE, confirming that the efficiency gain translates into robust individual molecular predictions <ref:2606.02662#pg2>. The cost of the MFML with this specific training data structure will be 1529.8 seconds <ref:2606.02662#pg2>.
The authors acknowledge support by the DFG through the project ZA 1175/3-1 as well as through the DFG Priority Program SPP 2363 on ‘Utilization and Development of Machine Learning for Molecular Applications – Molecular Machine Learning’ through the project ZA 1175/4-1 <ref:2606.02662#pg2>. The authors would also like to acknowledge the support of the ‘Interdisciplinary Center for Machine Learning and Data Analytics (IZMD)’ at the University of Wuppertal <ref:2606.02662#pg2>. VV thanks Sergei Tretiak, Olexandr Isayev, and Justin Smith for guidance with the ANI-1ccx dataset <ref:2606.02662#pg2>. The references listed are [7] Ramakrishnan, R., Dral, P.O., Rupp, M., Lilienfeld, O.A.: Big data meets quantum chemistry approximations <ref:2606. p. 0 E-mail(s): vinod@uni-wuppertal. de
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the
prohibitive cost of generating high fidelity training data. listed in increasing order of computation cost:HF/cc-pVTZ, HF/cc-pVQZ, MP2/ccpVTZ, and CCSD(T)/cc-pVQZ (see Supplementary Information S3 for comprehensive
details). 2 presents the MAE as a function of training data generation timecost for three distinct methods: single fidelity KRR, standard MFML, and adaptiveMFML.Where the paper says it
Where the paper says it
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Adaptive sampling of training data composition based on empirical error reduction allows AI systems to autonomously determine training dataset composition by querying training samples at each fidelity to
saturate model accuracy at lower fidelities before moving up to more expensive reference calculations.
-
The improved AI system can achieve a cost reduction of up to a factor of 30 compared to single fidelity methods and improve upon standard MFML by up to a factor of 5, establishing a
high-accuracy low-cost pathway for sustainable cost-aware machine learning in quantum chemistry.
-
The adaptive framework can minimize redundancy by only generating the data necessary to improve the model, effectively eliminating
a-priori generation of expensive data directly addressing the costbudget bottleneck in the ML-QC pipeline.
Abstract
Machine learning has accelerated quantum chemistry but is hindered by the prohibitive cost of generating high fidelity training data. Multifidelity machine learning (MFML) mitigates this overhead by systematically combining abundant low fidelity data with sparse high fidelity data. In spite of its success, standard MFML schemes rely on pre-defined scaling factors to determine sparse data ratio across fidelities, often generating redundant multifidelity data resulting in a loss of efficiency. Here, we introduce an adaptive on-the-fly multifidelity framework for machine learning that autonomously determines training dataset composition. By dynamically querying training samples at each fidelity, the algorithm saturates model accuracy at lower fidelities before moving up to more expensive reference calculations. We benchmark the novel adaptive-MFML across diverse chemical properties including theoretical best estimate ab initio potential energy surfaces, golden standard coupled cluster energies, and the more chemically challenging excitation energies. In our numerical experiments we show that our adaptive algorithm reduces data generation costs by up to a factor of 20 compared to single fidelity methods and improves upon standard MFML by up to a factor of 3. The mitigation of data redundancy establishes a high-accuracy low-cost pathway for sustainable cost-aware machine learning in quantum chemistry.
Sources
Related papers
- A Physics-Regulated Neural Framework for Learning 3D Grain Growth Dynamics
- FlexMoE: Learning One-for-All Multi-Budget Expert Pruning for Flexible MoE Deployment
- OptiMind: Improving Small Language Models for Optimization Modeling through Formulation Guidance and Multi-Turn Learning
- Staying in the Sweet Spot: Boost Reasoning Evolution via Responsive Rollout Difficulty Manipulation
- Examining the Impact of Data and Training Methods on Emergent and Subliminal Misalignment
- Rethinking Black-Box On-Policy Distillation: A Rubric-based Analysis