Improving the vibration isolation efficiency of chiral phononic crystals through viscoelastic damping
Listen
Radio episode about this paper
Transcript
Introduction to the show: ident: Physics. The day in general physics: instruments, methods and results across the field.
Kai: I'm Kai.
Mira: And I'm Mira, here with Lev.
Kai: We're looking at the paper: "Improving the vibration isolation efficiency of chiral phononic crystals through viscoelastic damping".
Mira: Here's the gist of the paper. Phononic crystals are being used more and more in practical applications, exploiting Bragg bandgaps to attenuate vibration transmission in a wide frequency range The results show that high viscous damping does not negatively affect the bandgap efficiency, which is a major advantage over resilient layer isolators where damping deteriorates the isolation properties Chiral phononic crystals (CPCs) maintain the spring stiffness and mass while shifting the longitudinal bandgap to a lower frequency The enhanced kinematics between the masses of the chain, made possible by its slanted connectors, amplifies their inertia through the addition of rotation to the motion of the disks However, CPCs are complex to design The total inertia of the masses can be explicitly calculated based on their static mass, moment of inertia, and angle of inclination of the connectors Modeling Viscoelasticity Modeling true viscoelasticity requires the implementation of frequency-dependent material properties The intricate frequency-dependency of polyurethane is studied by examining the influence of four fractional derivative model parameters, which define the storage modulus and loss factor The complex modulus E(ω) = E′ + iE′′ with E′ the storage modulus and E′′ the loss modulus Fractional derivative models allow to capture the slope and variations of the frequency dependent storage and loss modulus with a limited number of parameters Tunability through Parametric Study The axial and torsional stiffness of the inserts can be tuned by adapting their thickness, diameter and/or material properties The four parametric studies provide insights into the tunability of the crystal Adjusting the equilibrium E0 and high frequency E∞ modulus together allows to shift the attenuated frequency range without affecting the amplitude of the resonant peaks Experimental Validation Findings The vibration isolation efficiency of the new design shows to be more robust to damping than classical resilient layer solutions Increasing the loss factor in the full frequency range reduces the amplitude of the resonant peaks while increasing the storage modulus shifts to higher frequency the attenuated frequency range Good agreement is observed between the numerical and experimental force transmissibility curves after rescaling of the storage modulus to account for unknown shear modulus information The experiments confirm that both damping and stiffness variation shift the frequency range and the efficiency of the force transmissibility spectrum
Title and authors: Kai: Let's start with the title itself, "Improving the vibration isolation efficiency of chiral phononic crystals through viscoelastic damping." What that tells us right away is they aren't just looking at basic spring and mass systems anymore.
Mira: They are specifically looking at how to make these structures better at isolating vibrations by introducing some kind of material with memory, something viscoelastic.
Lev: I wonder what the authors meant by "improving efficiency." Are we talking about reducing the amplitude of transmitted force or just shifting where that attenuation happens on the frequency spectrum?
Kai: It seems like they are looking at how adding these viscoelastic inserts lets them tune those bandgaps, which is tough because designing chiral phononic crystals already has complex geometry.
Mira: They mention that they introduce these viscoelastic inserts between the masses of the chain specifically to improve that tunability of the crystal.
Lev: Tunability is key for practical use, right? If you can shift the frequency range you're isolating without messing up your resonant peaks, that makes a huge difference in design flexibility.
Kai: It seems like they are showing how these changes allow them to adjust the bandgap opening frequency while keeping the amplitude of those resonant peaks stable.
Mira: That’s interesting because usually when you change stiffness or damping, you end up shifting things in both directions, but this paper claims a cleaner separation for tuning the isolation range.
Lev: So they're essentially finding a way to decouple the frequency shift from the amplitude change when they introduce this specific type of damping behavior.
The paper's summary: Kai: So, to summarize what this paper is saying, they are taking these chiral phononic crystals and adding these viscoelastic materials between the masses and springs.
Mira: The core finding is that this approach helps them tune the bandgap frequencies more effectively than just using the basic structure alone.
Lev: What are they saying about how the viscous damping actually works inside those phononic crystals? Is it just a simple energy loss mechanism?
Kai: No, it’s not simple. They model true viscoelasticity by looking at frequency-dependent material properties, specifically using four fractional derivative model parameters to define the storage modulus and loss factor.
Mira: That level of detail is important because they are trying to capture the complex behavior of materials like polyurethane, which isn't just a simple spring or a simple damper.
Lev: So they are using these fractional derivatives to describe how the material responds differently depending on how fast you excite it, which sounds complicated for real hardware modeling.
Kai: It’s about capturing that frequency dependence; they use the complex modulus, which is split into the storage modulus and the loss modulus.
Mira: And then they define a loss factor as the ratio between those two moduli to quantify how much energy is being dissipated compared to how much is being stored.
Lev: That ratio, so when it's frequency dependent, that tells you a lot about whether you’re dealing with something purely elastic or something that has some internal friction involved.
The paper's improvements: Kai: The paper highlights several ways they are improving the system. They are tuning the axial and torsional stiffness of the inserts by adapting their thickness, diameter, and material properties.
Mira: They did four parametric studies to show how changing those parameters affects the tunability of the crystal structure itself.
Lev: That means they aren't just looking at one setup; they are showing a systematic way to push those boundaries on what these crystals can do structurally.
Kai: And then there’s this point about adjusting the equilibrium storage modulus, E zero, along with the high frequency modulus, E infinity.
Mira: When you adjust those two things together, it allows them to shift the attenuated frequency range without affecting the amplitude of those resonant peaks at all.
Lev: That’s a clean result for tuning; controlling two variables simultaneously to achieve a specific outcome on both frequency and amplitude is hard to get right in practice.
Kai: It seems like they are demonstrating that this tunability works by controlling these fundamental material properties of the inserts rather than just changing the physical dimensions of the chain itself.
Mira: And experimentally, they showed that increasing the loss factor across the full frequency range reduces those resonant peak amplitudes while increasing the storage modulus shifts that entire attenuated frequency range to higher frequencies.
Lev: So, if you want a wider isolation window, you can push it higher in frequency by adjusting the material properties and damping characteristics.
Conclusion: Kai: So wrapping up this paper on "Improving the vibration isolation efficiency of chiral phononic crystals through viscoelastic damping," the main implication is that incorporating viscoelastic elements gives us a much more flexible design tool.
Mira: It means we can get better frequency tuning while maintaining good isolation performance, which is crucial for practical applications where you need to isolate specific noise sources.
Lev: For real hardware, this suggests that designing with materials that have frequency-dependent loss factors rather than assuming a simple constant value will lead to more robust isolation systems.
Kai: The paper confirms that both damping and stiffness variation shift the frequency range and the efficiency of the force transmissibility spectrum in a predictable way.
Mira: And they did show good agreement between their numerical models and experimental data after they rescaled the storage modulus to account for unknown shear modulus information, which is a key validation step.
Lev: It’s good that they did that rescaling work because dealing with those unknown material properties in real-world testing is where most simulations fail when you try to move from theory to reality.
Kai: The paper on "Improving the vibration isolation efficiency of chiral phononic crystals through viscoelastic damping" shows how material complexity, when modeled correctly, allows for precise control over both the isolation frequency and the response characteristics of a system.
Empa Laboratory for Acoustics/Noise Control · Department of Mechanical Engineering campus Diepenbeek, KU Leuven · Department of Mechanical Engineering campus Heverlee, KU Leuven · Flanders Make@KU Leuven
physics.app-ph
Submitted: 2026-05-31
Updated: 2026-11-10
Comments: 24 pages, 18 figures, submitted to Results in Engineering
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Importance score: 80/100
The gist: Phononic crystals are being used more and more in practical applications, exploiting Bragg bandgaps to attenuate vibration transmission in a wide frequency range The results show that high viscous…
Key concepts
- Chiral Phononic Crystals (CPCs)
- These are specialized phononic crystals that maintain their structural stiffness and mass while shifting the vibration bandgap to a lower frequency. They use slanted connectors to amplify inertia through rotation, making them complex but tunable for specific applications.
- Viscoelasticity Modeling
- True material behavior requires modeling how materials change with frequency. This paper uses four fractional derivative parameters to define the storage and loss moduli of polyurethane, allowing simulations to accurately capture the frequency-dependent stiffness and energy dissipation.
- Fractional Derivative Models
- These mathematical models are used to describe the slope and variations of a material's complex modulus (E(ω)). They help capture how the material's storage modulus (stiffness) and loss modulus (damping) change across a wide range of frequencies using just a few parameters.
- Tunability through Parametric Study
- The axial and torsional stiffness of the crystal inserts can be adjusted by changing their thickness, diameter, or material. By studying four key parameters (E0, E infinity, alpha, tau), researchers can systematically shift the attenuated frequency range without altering the amplitude of resonant peaks.
Terminology
Summary
Phononic crystals are being used more and more in practical applications, exploiting Bragg bandgaps to attenuate vibration transmission in a wide frequency range The results show that high viscous damping does not negatively affect the bandgap efficiency, which is a major advantage over resilient layer isolators where damping deteriorates the isolation properties
Introduction to Chiral Phononic Crystals
Chiral phononic crystals (CPCs) maintain the spring stiffness and mass while shifting the longitudinal bandgap to a lower frequency The enhanced kinematics between the masses of the chain, made possible by its slanted connectors, amplifies their inertia through the addition of rotation to the motion of the disks However, CPCs are complex to design The total inertia of the masses can be explicitly calculated based on their static mass, moment of inertia, and angle of inclination of the connectors
Modeling Viscoelasticity
Modeling true viscoelasticity requires the implementation of frequency-dependent material properties The intricate frequency-dependency of polyurethane is studied by examining the influence of four fractional derivative model parameters, which define the storage modulus and loss factor The complex modulus E(ω) = E′ + iE′′ with E′ the storage modulus and E′′ the loss modulus Fractional derivative models allow to capture the slope and variations of the frequency dependent storage and loss modulus with a limited number of parameters
Tunability through Parametric Study
The axial and torsional stiffness of the inserts can be tuned by adapting their thickness, diameter and/or material properties The four parametric studies provide insights into the tunability of the crystal Adjusting the equilibrium E0 and high frequency E∞ modulus together allows to shift the attenuated frequency range without affecting the amplitude of the resonant peaks
Experimental Validation Findings
The vibration isolation efficiency of the new design shows to be more robust to damping than classical resilient layer solutions Increasing the loss factor in the full frequency range reduces the amplitude of the resonant peaks while increasing the storage modulus shifts to higher frequency the attenuated frequency range Good agreement is observed between the numerical and experimental force transmissibility curves after rescaling of the storage modulus to account for unknown shear modulus information The experiments confirm that both damping and stiffness variation shift the frequency range and the efficiency of the force transmissibility spectrum
Conclusion on Material Complexity
Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.
Improvements for AI systems
-
Implement frequency-dependent material properties in numerical simulations for dispersion curve calculation and harmonic force transmission to model true viscoelasticity accurately. This allows for a more realistic description of material behavior compared to classical, single-layer isolation solutions.
-
Enable the AI system to perform parametric studies on four fractional derivative model parameters (E0, E infinity, alpha, tau) for polyurethane foams. This capability allows the system to systematically explore how these parameters influence bandgap opening frequency and vibration isolation efficiency.
-
Allow the AI system to predict the effect of varying material properties on force transmissibility through a finite chiral crystal by comparing results from numerical models with experimental data from three crystals with different material properties. This validates the tunability functionality described in Section 4.
-
Give the AI system the ability to adjust model parameters to tune bandgap opening frequency and resonant peak amplitude, as demonstrated in Figure 9. This enables design optimization by allowing users to shift isolation ranges while controlling resonance characteristics.
-
Utilize the established trends that
increasing the loss factor in the full frequency range reduces the amplitude of the resonant peaks while increasing the storage modulus shifts to higher frequency
when analyzing experimental validation data from Section 14. This provides a quantitative guideline for designing new CPCs with different insert material properties.
Abstract
Mechanical phononic crystals attenuate vibration transmission in a wide frequency range called the bandgap. Chiral phononic crystals have demonstrated their ability to achieve low-frequency bandgaps while maintaining a high static stiffness. However, their design is non-trivial because of the complex geometry involved. Furthermore, bandgap generation in phononic crystals relies on wave scattering rather than energy dissipation, which leads to important local vibration amplitudes. In this paper, viscoelastic inserts are introduced with two goals: improve the crystal's tunability in terms of stiffness and bandgap properties, and employ damping to reduce internal resonances. First, the fundamental effect of viscous damping in phononic crystals is investigated through analytical equivalent models, showing that moderate damping improves the vibration isolation by merging multiple bandgaps. As a real-world example, highly viscoelastic polyurethane is studied by examining the influence of its frequency-dependent storage modulus and loss factor. Three crystals with different viscoelastic inserts are manufactured and the measured force transmissibility is successfully compared to the numerical models. The results show that the storage modulus correlates strongly with vibration isolation efficiency, defining both the frequency range and the maximum force reduction, whereas a loss modulus broadens the vibration isolation frequency range without negatively affecting its efficiency when it stays below a critical threshold value.
Related papers
- Twistsonics: engineering acoustic topological textures in moire sound lattices
- Vibe-FDTR: An agent-oriented framework for reproducible frequency-domain thermoreflectance data analysis
- Principles of Use of Tensile J-Curve Materials in Antagonistic Arrangements
- Nonreciprocal Radiation in Time-Periodic Topological Quadrupole Lattices
- Impact of Structural Design on Magneto-Mechanical Resonators: The Case of a Jewel Bearing Variant
- Measurement and Modeling of Structure-Induced Surface Scattering on Terahertz Channel