Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD

arXiv:2605.29998 · hep-lat, hep-ex, hep-ph, nucl-th · Submitted 2026-05-28 · Read on arXiv

Listen

Radio episode about this paper

Transcript

Introduction to the show: ident: High Energy Physics: Lattice. The day in lattice field theory: what the simulations put on the table.

Kai: We're looking at the paper: "Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD".

Mira: Here's the gist of the paper. Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD presents results on the Mellin moments of unpolarized parton distribution functions (PDFs) for pions and kaons up to fourth order.

Kai: Theoretical Framework The computation utilizes one Nf = 2 + 1 + 1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values.

Mira: The valence pion and kaon PDFs are reconstructed using the connected contributions to the three Mellin moments.

Kai: The calculation involves computing matrix elements of operators O for higher moments, such as O for the third and fourth moments.

Title and authors: Mira: Now shifting gears a bit, let's look at the title of this paper again: "Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD." What that tells us is they are specifically targeting these higher moments for two different particles.

Kai: It’s about going beyond just the first few moments, which are usually what you get in basic PDF fits. They want to see how the distribution evolves as you look at more detailed momentum fractions.

Lev: So instead of just knowing the average momentum fraction, they are trying to map out the shape of these distributions with more precision using lattice methods.

Mira: The authors use this lattice QCD approach to calculate things up to fourth order for both pions and kaons, which is a fairly high order for this type of calculation.

Kai: And they are doing it within one Nf equals two plus one plus one gauge ensemble of twisted mass fermions with quark masses tuned close to their physical values. That tuning is important because you want the lattice simulation to mimic the real world as closely as possible.

Lev: From my side, I wonder how challenging it is to get that level of accuracy for those higher moments on a real machine, especially when you’re dealing with the computational overhead of twisted mass fermions.

Kai: That’s a fair question, Lev. It's computationally intensive because you need to compute those higher derivative operators O for the third and fourth moments.

Mira: But they are using these specific methods to extract those moments from ratios of three- to two-point functions, which is their way of isolating what they need.

Lev: So, the method itself is quite involved because it’s not just a simple calculation; it requires careful handling of those ratios and the renormalization steps.

Kai: And they do that by first renormalizing the matrix elements nonperturbatively in the RI prime minus MOM scheme and then converting them to the MS scheme at a scale of two GeV. That’s how you get results that can be used for comparison with global PDF fits.

Mira: So, this paper is about showing how lattice QCD can provide these higher-order structural details for these light mesons, which is a pretty significant step in constraining our understanding of hadronic structure.

Lev: It gives us a benchmark on what's achievable with these current lattice setups for extracting these specific moment information.

The paper's summary: Kai: So, to summarize the core finding of this paper, they calculated the third and fourth Mellin moments, which they call x two and x three, of the pion and kaon quark unpolarized PDFs.

Mira: And they did it by using local operators for those moments. They used the ratios in equation seven to get these moments and then used relations nine to connect those back to the actual PDF structure.

Lev: And they mention that while the three-point functions generate both connected and disconnected contributions, they are neglecting those for these higher moments because they expect them to be small.

Kai: That’s important because it simplifies the calculation by focusing on the connected parts, which is what allows them to reconstruct the valence PDFs using only those three moments.

Mira: The result is that when you reconstruct the valence PDFs using this method, you see a clear difference between the light and strange quarks in both particles.

Lev: They find that even with these simplifications, the results still show that s quark distribution in the kaon is more pronounced than u quark distribution in both particles.

Kai: So it’s essentially confirming what we saw before but at a higher level of precision, showing how the SU three breaking plays out across these higher orders.

Mira: This paper helps constrain our understanding of how mass differences between light and strange quarks affect the internal structure of hadrons, which is a big deal for hadron physics.

Lev: It gives us a very concrete number about that symmetry breaking, even if it's based on lattice calculations.

The paper's improvements: Kai: The paper itself points out some areas where the method could be improved. One thing is that they are looking at how the results change with the order of the moment and they see that pion moments tend to decrease less with order than kaon moments do.

Mira: That’s a useful observation because it suggests that perhaps some aspects of the calculation are more stable or robust for pions compared to kaons when you go to higher orders.

Lev: So, this implies that maybe the method is better suited for pion PDFs if you want to probe those higher moment behaviors.

Kai: And they also mention that in terms of the large x region, the fall-off of the reconstructed PDF for pions shows an effective power beta eff being around ten to thirty percent below one.

Mira: That beta eff parameter describes how fast the distribution falls off as x gets close to one, which gives us a way to characterize that large x behavior.

Lev: So, if that effective power is below one, it means the distribution doesn't fall off as fast as a simple power law would predict.

Kai: And they also note that when you use a three-parameter form for each quark flavor to reconstruct the PDFs, it’s not sufficiently constrained by the available moments.

Mira: That means that while they have these moments, you might need more information to uniquely determine those three parameters if you want a very precise fit.

Lev: So, what this tells us is that the method has its limits; it gives us some insight but doesn't fully pin down the parameters without additional constraints.

Conclusion: Kai: Wrapping up this paper on "Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD," we see that this work successfully reconstructs valence PDFs up to fourth order.

Mira: The main implication is that we have a clearer picture of how SU three symmetry breaking manifests in these higher moments, especially as you increase the moment order.

Lev: For me, it confirms that lattice QCD can indeed provide these structural details for light mesons, which is what we need to know about their internal structure.

Kai: We should keep an eye on future work that includes disconnected contributions for even higher moments; those contributions could add more information and help us refine these results.

Mira: And they are also looking into new approaches like gradient flow or heavy-quark operator product expansion to see if they can get even better moment calculations beyond the fourth order.

Lev: That’s where the real engineering challenge lies, getting those methods to run on real hardware and handling that computational cost for higher orders.

Kai: We've seen a lot of structure here, but we need more than just the moments to fully map out these distributions.

Mira: Exactly. The paper shows what's possible with this lattice QCD approach for getting into those higher-order details of the pion and kaon structure.

Department of Physics, University of Cyprus · Computation-based Science and Technology Research Center, The Cyprus Institute · Helmholtz-Institut f¨ur Strahlen- und Kernphysik, University of Bonn · Bethe Center for Theoretical Physics, University of Bonn · Department of Physics and Earth Science, University of Ferrara & INFN · Institute for Theoretical Physics, Albert Einstein Center for Fundamental Physics, University of Bern

hep-lat, hep-ex, hep-ph, nucl-th

Submitted: 2026-05-28

Updated: 2026-11-11

Comments: Expanded version published in Phys. Rev. D 113, 11, 14524 (2026), 19 pages and 16 figures

License: http://creativecommons.org/licenses/by/4.0/

Importance score: 83/100

The gist: Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD presents results on the Mellin moments of unpolarized parton distribution functions (PDFs) for pions and kaons…

Key concepts

Mellin Moments
These are mathematical tools used to analyze the shape of parton distribution functions (PDFs). They are related to the moments of the momentum fraction carried by partons, allowing physicists to probe different aspects of how momentum is distributed inside hadrons.
Lattice QCD
This is a theoretical method that uses supercomputers to simulate the strong nuclear force. It discretizes spacetime into a lattice and calculates matrix elements of operators to determine properties like PDFs from first principles.
SU(3) Symmetry Breaking
This refers to the difference between light quarks (up and down) and strange quarks in terms of their distribution within hadrons. The study quantifies this breaking, finding it is about 30-40% larger for higher Mellin moments, indicating that the strange quark's momentum distribution behaves differently.
Effective Power Exponent ($eta_{eff}$)
This parameter describes how quickly the parton distribution function falls off as the momentum fraction (x) approaches one. A value significantly below unity suggests a slower fall-off, which helps characterize the behavior of PDFs at large x values.

Terminology

Summary

Higher Mellin Moments of the Unpolarized PDF of the Pion and the Kaon from Lattice QCD presents results on the Mellin moments of unpolarized parton distribution functions (PDFs) for pions and kaons up to fourth order. p. 0

Where the paper says it

Box 20537, 1678 Nicosia, Cyprus 2Computation-based Science and Technology Research Center, The Cyprus Institute, 20 Kavafi Str. , Nicosia 2121, Cyprus 3Helmholtz-Institut f¨ur Strahlen- und Kernphysik, University of Bonn, Germany 4Bethe Center for Theoretical Physics, University of Bonn, Germany 5Department of Physics and Earth Science, University of Ferrara & INFN, Via Saragat 1, 44122 Ferrara, Italy 6 Institute for Theoretical Physics, Albert Einstein Center for Fundamental Physics, University of Bern, Switzerland We present results on the Mellin moments of the unpolarized parton distribution function (PDF) of the pion and kaon up to the fourth order.

Theoretical Framework

The computation utilizes one Nf = 2 + 1 + 1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values. The valence pion and kaon PDFs are reconstructed using the connected contributions to the three Mellin moments. p. 0

Where the paper says it

We reconstruct the valence pion and kaon PDFs using the connected contributions to the three Mellin moments. We compare our results on the Mellin moments and the reconstructed PDFs with other lattice QCD and phenomenological determinations.

The calculation involves computing matrix elements of operators O for higher moments, such as O for the third and fourth moments. p. 1
Where the paper says it

µn ⟩, where µj , j = 1, · · · , n are Lorentz indices. Thus, in order to compute the third and the fourth moments we will need to compute the matrix elements of the operators O {µνρ} f = ¯qf γ {µ ↔ Dν ↔ Dρ} qf , O {µνρσ} f = ¯qf γ {µ ↔ Dν ↔ Dρ ↔ Dσ} qf , (3) where the curly brackets denote symmetrization over the indices and subtraction of the trace.

Lattice Setup and Analysis

The lattice setup uses a gauge ensemble labeled as cB211.072.64 with specific parameters including lattice spacing a = 0. p. 2

Where the paper says it

In Table I we give the parameters of the ensemble labeled as cB211. TABLE I: Parameters of the ETMC gauge ensemble used in this work, where a is the lattice spacing, L the spatial and T the temporal lattice size, and Mπ± and MK± the pion and kaon mass, respectively.

0796(1) fm, pion mass Mπ± = 643 MeV, and kaon mass MK± = 498. p. 2
Where the paper says it

Name a [fm] L 3 × T Mπ [MeV] MK [MeV] cB211. 0796(1) 643 × 128 140.

41(22) MeV. p. 2
Where the paper says it

TABLE I: Parameters of the ETMC gauge ensemble used in this work, where a is the lattice spacing, L the spatial and T the temporal lattice size, and Mπ± and MK± the pion and kaon mass, respectively. Name a [fm] L 3 × T Mπ [MeV] MK [MeV] cB211.

Statistical errors are computed using a jackknife analysis. p. 2
Where the paper says it

40(22) 498. 41(11) We compute statistical errors using a jackknife analysis.

The determination of moments involves extracting them from the ratios given in Eq. p. 2
Where the paper says it

We take the ground-state energy E0(p) as determined from the two-state fit with the highest probability according to the AIC, which is then used as an input parameter with uncertainties in the following. Determination of the moments We extract the moments from the ratios given in Eq.

(7) by analyzing the three-point functions. p. 1
Where the paper says it

For ⟨x 2 ⟩M f , we use a boosted frame where p has non-zero values in at least two spatial directions, p = (2π/L, 2π/L, 0) and permutations and for ⟨x 3 ⟩M f p = (2π/L, 2π/L, 2π/L). We extract the moments from the ratio of three- to two-point functions.

Moment Extraction and Renormalization

The third and fourth moments are extracted from ratios of three- to two-point functions using the ratio R O M(ts, tins, p). The relations to the moments then become ⟨x2⟩ Mf = −Πij M(p) p ip j and ⟨x3⟩ Mf = iΠ1234 M (p) p1p2p3. p. 2

Where the paper says it

If ts −t0 and tins−t0 are large enough, the ratio in Eq. (7) becomes independent of the time R O M(ts, tins, p) ts→∞ −−−−−−−→ ts−tins→∞ Π O M(p), (8) The relations to the moments then become ⟨x 2 ⟩ M f = − Π ij M(p) p ip j , ⟨x 3 ⟩ M f = iΠ1234 M (p) p 1p 2p 3 .

Matrix elements of O are renormalized nonperturbatively in the RI′ -MOM scheme and then converted to the MS scheme at the scale µ = 2 GeV. p. 3
Where the paper says it

The purple horizontal band across both columns shows the final value determined using model averaging of two-state fits. Renormalization The matrix elements of O {µνρ} f and O {µνρσ} f are renormalized nonperturbatively in the RI′ -MOM scheme [25], followed by a perturbative conversion to the MS scheme at the scale µ = 2 GeV.

PDF Reconstruction and Comparison

The valence PDFs are reconstructed using a parametric form with 2- and 3-parameters for each quark flavor. The results show that the kaon s-quark PDF has a more pronounced peak and falls faster both for low and large x values compared to the u-quark PDF in both pion and kaon. p. 6

Where the paper says it

These ratios confirm that the PDF of the pion falls slower for higher x values than the u-quark PDF of the kaon. The ratio of the third moments has a large uncertainties but still corroborates this conclusion.

Comparisons with other lattice QCD calculations, experimental data analysis, and model calculations are performed to assess consistency. p. 1
Where the paper says it

V, we present a reconstruction of the PDFs using the calculated moments. VI includes comparison of our moments to other lattice QCD, experimental data analysis and other model calculations and compare our reconstructed PDF to experimental data analysis determinations.

The study concludes that there is clear SU(3) symmetry breaking of about 30 − 40% that tends to become more severe for higher moments. p. 6
Where the paper says it

We therefore estimate the SU(3) symmetry breaking from the deviation from 1. It can be noticed clear SU(3) symmetry breaking of about 30 − 40% that tends to become more severe for higher moments.

Conclusion and Outlook

The reconstructed PDFs visually show consistency, although their fall-off in the large-x region differs, with the effective power βeff being around 10% − 30% below unity for the pion PDFs. Future work includes computing disconnected contributions for higher moments and exploring novel approaches like gradient flow or heavy-quark operator product expansion to improve PDF determination. p. 1

Where the paper says it

Recently, novel methods based on the gradient flow [18] have been proposed to enable the computation of Mellin moments beyond the fourth order, with first studies providing promising results [19]. In a previous work by the Extended Twisted Mass Collaboration (ETMC), the first full decomposition of the momentum fractions for the quarks and gluons in the continuum limit was performed for the pion and kaon including disconnected contributions and directly at the physical pion mass [20].

The results confirm that the s-quark distribution has larger support at larger x values as compared with u-quark in the kaon. p. 8
Where the paper says it

4535(49) for kaon s-quark PDF. These values confirm that the s-quark distribution has larger support at larger x values as compared with uquark in the kaon.

Pruning redundant reasoning tokens

The authors present results on the Mellin moments of unpolarized parton distribution functions (PDFs) for pions and kaons up to fourth order. The computation is done using one Nf = 2 + 1 + 1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values. p. 0

Where the paper says it

, Nicosia 2121, Cyprus 3Helmholtz-Institut f¨ur Strahlen- und Kernphysik, University of Bonn, Germany 4Bethe Center for Theoretical Physics, University of Bonn, Germany 5Department of Physics and Earth Science, University of Ferrara & INFN, Via Saragat 1, 44122 Ferrara, Italy 6 Institute for Theoretical Physics, Albert Einstein Center for Fundamental Physics, University of Bern, Switzerland We present results on the Mellin moments of the unpolarized parton distribution function (PDF) of the pion and kaon up to the fourth order. The computation is done using one Nf = 2 + 1 + 1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values.

We reconstruct the valence pion and kaon PDFs using the connected contributions to the three Mellin moments. p. 0
Where the paper says it

The computation is done using one Nf = 2 + 1 + 1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values. We reconstruct the valence pion and kaon PDFs using the connected contributions to the three Mellin moments.

We compare our results on the Mellin moments and the reconstructed PDFs with other lattice QCD and phenomenological determinations. p. 0
Where the paper says it

We reconstruct the valence pion and kaon PDFs using the connected contributions to the three Mellin moments. We compare our results on the Mellin moments and the reconstructed PDFs with other lattice QCD and phenomenological determinations.

How the training signal is built

The momentum fraction ⟨x⟩M f is extracted from the matrix element of the traceless energy-momentum tensor (EMT). For higher moments, we need to compute the matrix elements of operators O for higher derivatives, such as O for the third and fourth moments. p. 1

Where the paper says it

[20], and the connected part will be used here for the reconstruction of the valence PDFs. For the computation of higher moments, we need to compute the matrix elements of operators of higher derivatives.

The decomposition of these matrix elements in the forward limit relates them to ⟨x2⟩ Mf and ⟨x3⟩ Mf. p. 1
Where the paper says it

In order to avoid mixing, we take all indices to be different, which means that we need a boosted frame. The decomposition of the matrix elements in the forward limit is given by [21, 22] ⟨M(p)|O{µνρ} f |M(p)⟩ =2iKp {µ p ν p ρ} ⟨x 2 ⟩ M f ⟨M(p)|O{µνρσ} f |M(p)⟩ = − 2Kp {µ p ν p ρ p σ} ⟨x 3 ⟩ M f (4) where K = 1/2E(p) is a kinematic factor.

Where the gains come from

The study shows that ratios of moments in Table III indicate that the pion moments tend to consistently decrease less with the order of the moment, as compared to the kaon moments. The ratios in Table IV confirm that the PDF of the pion falls slower for higher x values than the u-quark PDF of the kaon. p. 6

Where the paper says it

In Table IV, the first column compares the ratios of moments of the light quarks in the pion and kaon. These ratios confirm that the PDF of the pion falls slower for higher x values than the u-quark PDF of the kaon.

This points to larger overall moments for the s-quark in the kaon, indicating that it carries a larger fraction of its momentum due to the large mass of the strange quark. p. 6
Where the paper says it

gives the ratios of the pion u-quark to those of the kaon s-quark. These ratios point to larger overall moments for the s-quark in the kaon, indicating that it carries a larger fraction of its momentum due to the large mass of the strange quark.

The deviation from 1 in Table IV estimates SU(3) symmetry breaking from about 30 − 40% that tends to become more severe for higher moments. p. 6
Where the paper says it

We therefore estimate the SU(3) symmetry breaking from the deviation from 1. It can be noticed clear SU(3) symmetry breaking of about 30 − 40% that tends to become more severe for higher moments.

Green — the paper says it, and the page is printed. Red — no passage carries it, so treat that sentence as unverified. The same check runs on your own text: check a summary against its source, $5.

Improvements for AI systems

  1. Improved PDF Reconstruction Capability: The system can reconstruct valence PDFs using only connected contributions from three Mellin moments, as described in Section V, which provides a systematic method for estimating PDFs when sea quark effects are assumed small.

  2. Enhanced Flavor Symmetry Analysis: The system can quantify SU(3) symmetry breaking by comparing ratios of moments of light and strange quarks in the kaon, noting clear SU(3) symmetry breaking of about 30 − 40% that tends to become more severe for higher moments.

  3. Determination of Effective Power Exponent: The system can compute the effective beta parameter βeff, which describes the effective power of the 1 − x falloff in the large x region, allowing for a more nuanced understanding of PDF behavior as x approaches one.

  4. Comparison with Experimental Data: The improved system can compare reconstructed PDFs with experimental data, noting that the overall shape of the reconstructed PDF are visually consistent with each other even if the numerical values of some of the parameters are notably different.

  5. Constraint on Parametrization: The system can assess when a three-parameter form is sufficient by observing that with the available moments, the three-parameter form is not sufficiently constrained, and a strong x dependence is induced in βeff by the last term in Eq. (33).

Abstract

We present results on the Mellin moments of the unpolarized parton distribution function (PDF) of the pion and kaon up to the fourth order. The computation is done using one N f=2+1+1 gauge ensemble of twisted mass fermions with quark masses tuned to approximately their physical values. We reconstruct the valence pion and kaon PDFs using the connected contributions to the three Mellin moments. We compare our results on the Mellin moments and the reconstructed PDFs with other lattice QCD and phenomenological determinations.

Sources

Related papers